Directional Force Exciter DF

• Economic and powerful exciter for

high performance

• Long service life and extremely

calm operation

• Minimum maintenance require-

ments

• Optimum, application-orientated
graduation of exciters

• Low operation noise level

• 98% availability

• Ideal for use in continuous

operation

Application Construction Functions

Schenck Process directional force Roller bearings and gear wheels are The Schenck Process DF directional
exciters series DF are used to accommodated in a cast iron housing force exciter generates a force F with
drive vibrating conveyors or vibrat- and are oil-lubricated (oil immersion a sine-shaped pattern along line a-a.
ing screens with exciting forces lubrication). The exciter is equipped with two
from 43 up to 603 kN per exciter. Maintenance is limited to an oil shafts and unbalance masses. The
Contrary to unbalance motors, change or an oil-level check, respec- unbalance masses are synchronized
directional force exciters have the tively, at the prescribed intervals. by a built-in gear drive, rotating both at
advantage of well defined force The unbalance masses can be the same speed in opposite directions.
flows and defined mechanical changed during shutdown, simply by The components of the centrifugal
loads in the vibrating machine. installing or removing supplementary forces F1 and F2 working along line a-
The vibration data are independ- masses (steel or lead unbalance a add to the resulting force F. The
ent of bulk material loads. weights). The exciter is run externally force components perpendicular to
by a standard electric motor via a that direction cancel each other.
drive shaft.
For all directional force exciters suit-
able drive shafts are available.
If required, braking devices can be
used to reduce slow-down oscilla-
tions. Frequency converters allow for
infinite variability of the centrifugal
force, which is, in effect, the variation
of the feed rate.

BV-D2024GB
Dimensions
DF 100S DF 200S DF 300S DF 401L DF 401S DF 401V DF 404S DF 404V DF 5L
in [mm]
A 2x125 1x75 4x120 4x120 4x120 4x120 4x120 4x120 5x120
A1 - 115 - - - - - - -
В 380 435 600 600 600 600 600 600 730
С 515 636 690 780 780 780 780 780 830
E 434 438 537 568 568 568 568 568 568
F Ø 31 Ø 27 Ø 31 Ø 25 Ø 25 Ø 25 Ø 25 Ø 25 Ø 31
G 18 18 18 34 34 34 34 34 23
H 250 250 310 310 310 310 310 310 315
J 536 646 701 786 786 786 - - 819
K 190 230 250 275 275 275 275 275 300
M 320 320 340 340 340 340 340 340 380
N 240 260 260 260 260 260 260 260 300
О 504 574 600 670 670 794 - - 814
P 434 494 522 580 580 708 - - 712
R 439 456 543 560 560 560 - - 579
S 46 44 84 63 63 63 - - 46

Dimensions
DF 5S DF 501S DF 501V DF 504S DF 504V DF 601S DF 601V DF 604S DF 604V
in [mm]
A 5x120 5x120 5x120 5x120 5x120 4x120 4x120 4x120 4x120
A1 - - - - - 150 150 150 150
В 730 730 730 730 730 910 910 910 910
С 830 830 830 830 830 1040 1040 1040 1040
E 568 569 569 569 569 659 675 659 675
F Ø 31 Ø 31 Ø 31 Ø 31 Ø 31 Ø 31 Ø 31 Ø 31 Ø 31
G 23 23 23 23 23 25 25 25 25
H 315 315 315 315 315 370 370 370 370
J 819 819 819 819 819 1032 1032 - -
K 300 300 300 300 300 376 376 376 376
M 380 380 380 380 380 470 470 470 470
N 300 300 300 300 300 390 390 390 390
О 814 918 918 1014 1014 1087 1087 - -
P 712 883 883 906 906 934 994 1064 1064
R 579 579 579 579 579 696 696 - -
S 46 46 46 46 46 16 16 - -
Directional force exciter
Working Moment Weight with-
max. Rated Power of
Exciter Speed out 2')
in [kg/cm] Exciter Force Drive Motor Unbalances Order No.r
Type in [min-1] Protective Box
min max in [kN] in [kW1)]
in [kg]
DF 100 S 1000 416 780 43 3 250 Steel S000239.06
DF 100 S 1000 416 912 50 3 260 Lead S000239.11
DF 200 S 1000 624 1208 67 4 285 Steel S000240.06
DF 200 S 1000 624 1400 77 4 295 Lead S000240.11
DF300 S 1000 968 1780 98 5,5 435 Steel S000216.06
DF300 S 1000 968 2072 114 5,5 455 Lead S000216.11
DF401 L 1500 848 1648 203 7,5 420 Steel S001021.01
DF401 S 1000 1680 3248 178 7,5 490 Steel S000012.06
DF401 V 750 2400 4632 143 7,5 550 Steel S000013.06
DF404 S 1000 2033 3930 215 11 - Steel on request
DF404 V 750 2033 4764 147 11 - Lead on request
DF5 L 1500 1520 2820 348 11 700 Steel S009470.06
DF5 S 1000 2536 4220 231 11 740 Steel S000265.06
DF501 S 1000 2816 5600 307 15 880 Steel S000235.06
DF501 V 750 2320 6216 192 15 920 Steel S000236.04
DF501 V 750 2320 7680 237 15 980 Lead S000236.07
DF504 S 1000 3564 7128 391 18,5 924 Steel V055700.B01
DF504 V 750 4342 8684 268 18,5 973 Lead V064328.B01
DF601 S 1000 4592 9000 493 22 1270 Steel S000233.06
DF601 V 750 7184 15200 469 30 1490 Steel S000234.06
DF604 S 750 7832 16570 511 37 1550 Steel V056400.B01
DF604 V 740 7832 20076 603 37 1675 Lead V063722.B01
1)
Standard values at operating voltage, the torque in the 0-300 min-1 speed range must be at least double and not more
than 2,5 times the nominal moment.
2)
Including clamping pins, attachments, dipstick, punch; DF 300S and higher with transport restraint.
Protective box for directional force exciters

Single Drive Twin Drive

Тype
Weight in [kg] Order No. Weight in [kg] Order No.
DF100 S 13 X794990.01 26 X794998.01
DF200 S 18 S000011.01 36 S000011.02
DF300 S 19 X794985.01 38 X794995.01
DF401 S/L 29 X794986.01 59 X794987.01
DF401 V 29 X794996.01 59 X794997.01
DF404 S - on request - on request

BV-D 2024GB 0828.1 All information is given without obligation. All specifications are subject to change. © by Schenck Process GmbH, 2008
DF5 S/L 34 S006918.01 66 S006918.02
DF501 S/V 34 S000010.01 66 S000010.02
DF504 S/V 35 V057068.B01 70 V057068.B02
DF601 S/V 63 X794751.01 118 X794752.01
DF604 S/V - on request - on request

Option

Drive Shaft see BV-D2324

Schenck Process GmbH

Pallaswiesenstr. 100
64293 Darmstadt, Germany
Phone: +49 6151 1531-3525
Fax: +49 6151 1531-3138
[email protected]
www.schenckprocess.com