Industrial Ethernet Switch

ODOT-MS105T/108T/116T

User Manual

V2.10

2021.02.01

http:// www.odotautomation.com 1 / 15 TEL: +86-0816-2538289

 ODOT-MS105T/108T/116T unmanaged

ODOT Automation System Co., Ltd.

2021-02

Copyright ©2021 ODOT Automation all rights reserved

Version Information
Date Version Content Author
2021-02-01 V1.00 Release version CCL

http:// www.odotautomation.com 2 / 15 TEL: +86-0816-2538289

Ownership rights information

Without the permission of the copyright owner，all or part of this document shall
not be republished as a paper or electronic document.

Disclaimer

This document is only intended to assist the reader in using the products, and the
company shall not be responsible for any loss or error caused by the use of the
information in this document. The product and text described in this document are
under constant development and refinement. ODOT Automation System Co., Ltd. has
the right to modify this document without notifying users.

Software download

Please log on the official website: www.odotautomation.com and click on the

corresponding product page to download.

http:// www.odotautomation.com 3 / 15 TEL: +86-0816-2538289

 Content
1.Product Overview .................................................. 5
1.1 Product Introduction ............................................ 5
1.2 Function Introduction ........................................... 5
1.3 System Parameter .............................................. 6
2.Hardware description ............................................... 7
2.1 Product appearance ............................................ 7
2.2 Product identification drawing .................................... 8
2.3 Wiring diagram ................................................. 8
2.4 LED indicator description ........................................ 9
2.5 Installation size ............................................... 12
3. Troubleshooting .................................................. 14

http:// www.odotautomation.com 4 / 15 TEL: +86-0816-2538289

1.Product Overview

1.1 Product Introduction

ODOT-MS105T/108T/116T is a series of plug and play, industrial grade
non-management Ethernet switch with 5/8/16 100Mbps ports, all of which
support 10/100Mbps auto-negotiation (MDI/MDIX), IEEE 802.3/802.3U /
802.3X, Auto-MDI /MDIX and broadcast storm protection.
The switch operating temperature range is -20 ° C to 70 ° C, and it could
be applied to a variety of industrial environments with standard 35mm DIN rail
installation, and its protection level is IP20.

1.2 Function Introduction

ODOT-MS105T ODOT-MS108T ODOT-MS116T
Support IEEE 802.3/802.3x/802.3u
Input voltage 1 way 9～36V DC 2 way 9～36V DC
Installation 35mm standard Din rail
MAC address 2K 16K
Support Auto-negotiation 10/100Mbps, half/full duplex, Auto MDI/MDIX
operating -20～70 ℃
temperature
Humidity 5～90%(no-condensation)
Support Broadcast storm protection
Support Anti-reverse connection protection
Warranty 3 years

http:// www.odotautomation.com 5 / 15 TEL: +86-0816-2538289

1.3 System Parameter
Technical Parameter
ODOT-MS105T ODOT-MS108T ODOT-MS116T
IEEE 802.3 10BaseT
IEEE 802.3u 100BaseT(X)
IEEE 802.3x Flow Control
Process Type Storage and forwarding
Switch Attribute
ODOT-MS105T ODOT-MS108T ODOT-MS116T
MAC address 2K 16K
size
Packet buffer 512bit 4MB
area size
Interface RJ45 port：10/100BaseT(X) auto-sensing,
MDI/MDIX auto-negotiation
Operating Temperature：-20～70 ℃ Temperature：
Conditions -40～85 ℃
Power 9V～36V DC（suggested 24V）
Overcurrent 1.25A
Protection
Anti-reverse Support Anti-reverse connection protection
connection
protection

Electric Parameter
ODOT-MS105T ODOT-MS108T ODOT-MS116T
Operating 9～36V DC
Voltage
Overcurrent 1.25A
Protection
Overall Power 50mA@24V 80mA@24V 200mA@24V
Consumption
Humidity 5～95%（no-condensation）
Warranty 3 years
ESD 2KV

http:// www.odotautomation.com 6 / 15 TEL: +86-0816-2538289

2.Hardware description

2.1 Product appearance

Take ODOT-MS105T as example（ODOT-MS108T, ODOT-MS116T is similar）

http:// www.odotautomation.com 7 / 15 TEL: +86-0816-2538289

2.2 Product identification drawing
Take ODOT-MS116T as example（ODOT-MS105T,ODOT-MS108T is similar）

2.3 Wiring diagram

Table 2.3.1 ODOT-MS105T wiring instruction

Wiring port Wiring marking Wiring instruction

1 PE Earthing
2 V- Power input negative
3 V+ Power input positive

http:// www.odotautomation.com 8 / 15 TEL: +86-0816-2538289

 Table 2.3.2 ODOT-MS108T wiring instruction
Wiring port Wiring marking Wiring instruction
1 PE Earthing
2 V- Power input negative
3 V+ Power input positive

Table 2.3.3 ODOT-MS116T wiring instruction

Wiring port Wiring marking Wiring instruction
1 PE Earthing
2 V2- Power 2 input negative
3 V2+ Power 2 input positive
4 PE Earthing
5 V1- Power 1 input negative
6 V1+ Power 1 input positive

2.4 LED indicator description

1. Power LED
Table 2.4.1 ODOT-MS105T/108T LED instruction
Marking Status Definition
ON (RED) Power supply is normal
PWR
OFF(RED) Power supply is abnormal

Table 2.4.2 ODOT-MS116T LED instruction

Marking Status Definition
ON (RED) Power supply 1 is normal
PWR1 OFF(RED) Power supply 1 is
abnormal

http:// www.odotautomation.com 9 / 15 TEL: +86-0816-2538289

 PWR2 ON (RED) Power supply 2 is normal
OFF(RED) Power supply 2 is
abnormal

2. Network port indicator LED

（5 口）

（8 port）

Link/Act：Link Status indication, Active: Active indicator

ON：Link UP
OFF：Link DOWN
Flash：Active
SHIELD：RJ45 Plug shield interface

http:// www.odotautomation.com 10 / 15 TEL: +86-0816-2538289

 （16 port）
Speed：Network speed indicator light (multi-color)
Green on：100Mbps
Green off：10Mbps

Link/Act：Link Status indication, Active indicator

ON：Link UP
OFF：Link DOWN
Flash：Active

SHIELD：RJ45 Plug shield interface

http:// www.odotautomation.com 11 / 15 TEL: +86-0816-2538289

2.5 Installation size

Table 2.5.1 ODOT-MS105T Installation size

http:// www.odotautomation.com 12 / 15 TEL: +86-0816-2538289

 Table 2.5.2 ODOT-MS108T Installation size

http:// www.odotautomation.com 13 / 15 TEL: +86-0816-2538289

 Table 2.5.3 ODOT-MS116T Installation size

3. Troubleshooting
（1）The "PWR" LED is off, please check whether the switch power supply
is normal;
（2）Insert the cable, but the LED on the Ethernet port is not on. Please
check whether the plug at both ends of the cable have been firmly inserted and
whether the cable is damaged.

______________________________________________________________

http:// www.odotautomation.com 14 / 15 TEL: +86-0816-2538289

 Odot Automation System Co., Ltd.
Add: No.6 Hongsheng Road, Hi-Tech District, Mianyang, Sichuan, China.

Tel: +86-0816-2538289
Zip Code: 621000
Email:[email protected]
Web: www.odotautomation.com

http:// www.odotautomation.com 15 / 15 TEL: +86-0816-2538289