Scribd
Upload
59 views1 page

Tectyl RP 955 PDS EN

This document provides information about Tectyl RP 955, a rust preventive and lubricant for zinc coated steel. It forms a protective film, has a high flash point making it safe for fire hazards, and prevents oil staining. The document outlines its physical properties, applications, instructions for use, protection periods, and packaging and safety information.

Uploaded by

Sinh Le
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
59 views1 page

Tectyl RP 955 PDS EN

This document provides information about Tectyl RP 955, a rust preventive and lubricant for zinc coated steel. It forms a protective film, has a high flash point making it safe for fire hazards, and prevents oil staining. The document outlines its physical properties, applications, instructions for use, protection periods, and packaging and safety information.

Uploaded by

Sinh Le
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Rust Preventive

Tectyl RP 955
Oily Film, High Flash Point, Anti Oil-Stain, Lube & Rust Preventive, For Zinc Coated Coil

| INTRODUCTION | ------------------------------------------ | FEATURES | --------------------------------------------------------

Tectyl RP 955 is designed for operation which long-  Excellent rust protection and Lubrication.
term anti-corrosion performance is required.  Anti Oil-Stain
Tectyl RP 955 forms the film that has high lubricancy.  Available to all kinds of metals
It is rust preventive for galvanized steel plate, the color  Easy to be removed
of those cannot changed when it is applied to non-
ferrous metals. | APPLICATION | ---------------------------------------------------
Additionally, it is safe against fire hazard on site due to
high flash point and prevents oil stain so anticipate  Rust protection of electronic zinc coated steel sheet to be
stable operation performance. stored indoors.
It has excellent remove-ability is easily removed when  Rust protection of parts which require thin rust protection
the like of Panel Press Operation is required. & lubrication film.
 Rust protection of parts to be operated near fire.
| PHYSICAL PROPERTIES | ---------------------------------  Short time rust protection of parts to be stored in the place
where oxygen or sulfuric acid gas is generated.
 Products exported in packing and needed to be stored long
Appearance Amber Naked Eyes
time.
Specific gravity (15/4℃) 0.90 ASTM D 1298
Flash Point (℃) 152 ASTM D 56
| HOW TO USE| ----------------------------------------------------
Kinematic viscosity
18.3 ASTM D 445
(㎟/s, 40℃)  Electro-Static inunctions, Dip, Spray, Brush.
Oil Stain (82℃X24hrs) Pass MIL-C-22235A  Clean parts before applying.
 Do not dip when parts are hot.
- All data given in this Product Data Sheet are typical of this Product.
 When Spray, keep low pressure.
It does not however constitute a specification. And, We reserve
 Use tank designed to drain and remove water regularly.
the right to modify products without prior notice
 Ventilate an area and be careful about fire on site.
 Minimize evaporation of solvent from tank.
| PROTECTION PERIOD | ----------------------------------

| PACKING & SAFETY | -------------------------------------------


Period
Condition e.g.
(mon)
 Tank/Lorry, Tote, Drum(200LT), Pail(20LT)
Mild 3~4 Relative humidity below 60%
 For your Safety, Refer to the Material Safety Data Sheet,
Normal 1~3 Non-ventilated warehouse, Plant
Severe Not Exposed outdoor storage

- Above rust protection period may differ depending on working


environment, surface condition, storage method and climate etc.

TECTYL
Website : www.tectylasia.com

You might also like