FUJIFILM TSS FUJIFILM INDUSTRIAL RADIOGRAPHIC FILM IX50XD, IX80XD and IX100XD New industrial x-ray film developed by FUJIFILM's leading technology brings efficiency and stability to your every day inspection needs. XO film provides excellent image quality coupled with high product stability for NDT radiographic inspection in all industry segments. Types and Features: Relative Exposure Factors” Film System Classification Film Features and Major Applications ooo 10 ASTM IS sookv 200KV 1r192 Cos. aug99-1 18157627, Ultra fine grain film with very high contrast and medium speed IxX50XD _@ Welds: High sensitivity level 230 24 22 220 8 1 R Castings: High sensitivity level High energy isotope exposure Very fine grain fim with very high contrast and medium speed IXBOXD —_ @ Welds: Normal sensitivity level 16 15 18 15 4 1 R ‘@Ccastings: Normal sensitivity level ‘®Normally used for many kind of usage Fine grain fim with high contrast and high speed TX10OXD _@ Welds: Normal sensitivity level 10 10 «100 «10S I 3 ‘@ castings: Normal sensitivity level |* Normally used for many kind of usage * TX100X0 film is assigned @ relative exposure of 1.0 under each exposure conditions. ** Classification based on development under Fujiim’s recommended processing conditions. Examples of recommended conditions (temperature and immersion time) are as follows. Manual processing: 20 degree Celsius Sminutes ‘Automatic processing: 26 degree Celsius 100 secondsDATA SHEETS + Film Selection Guide: FUJIFILM RADIOGRAPHIC FILM (One of the film selection rule is mentioned in ISO 17636-1 and another selection guide also can be used as below. Standards for film selection dependant on material, specimen thickness, X-ray equipment power and type of gamma-ray sources are given below. Material and X-ray Tube Voltage [kV] Thickness [mm] below 50 50-80 80-120 120-150, 150-300 Tease corso Vateatend Tray Tbe Votoge I Thickness (mm) below 50 50-80 80-120 120-150 150-300 wise cooDATA SHEETS + FUJIFILM RADIOGRAPHIC FILM Characteristic Curve Manual processing Exposure: X-ray 220 kV Screen: Pb screen 0.03mm Front and back Processing: 20°C Sminutes Developer: Hi-RENDOL I Density 35 3.0 25 2.0 15 1.0 os: 0.0 05 10 15 20 + 1X100xD + IX80XD = IXS0XD 25 30 35 40 Log Relative ExposureDATA SHEETS + FUJIFILM RADIOGRAPHIC FILM Automatic processing + 1X100xD_ + IX80XD Exposure: = IX50XD X-ray 220 kV Screen: Pb screen 0.03mm Front and back Processing: 23°C 120seconds Developer: SUPERDOL I oS 10 15 20 25 30 35 40 Log Relative ExposureDATA SHEETS - FUJIFILM RADIOGRAPHIC FILM IX50XD Ww Exposure diagram: 100 mA-min Steel (Fe) Density: 2.0 Screen: Pb 0.03mm. Front and back SFD: 1000mm 1xeoxp Processing: Automatic 00 ‘SUPERDOL I é 23°C 120seconds z 160 200240 | | f 300 ao | 1 ‘Thickness mmDATA SHEETS - FUJIFILM RADIOGRAPHIC FILM Ir-192 cow Steel (Fe) Density: 2.0 Screen: Pb 0.03mm. Front and back SFD: 1000mm Processing: Automatic ‘SUPERDOL I 239C 120seconds 100 Co-60 Steel (Fe) é Density: 2.0 Screen: Pb 0.03mm, Front and back SFD: 1000mm, Processing: Automatic SUPERDOL I 23°C 120seconds xs0x0 x100x0 ‘ThicknessDATA SHEETS + FUJIFILM RADIOGRAPHIC FILM Base Used: Polyester 0.175 mm thick, blue tinted base, A polyester base is used having excellent strength and safety being suitable also for automatic processing, Safelight: This film should be handled under the Fujifilm Safelight Filter SLG 8U in a lamp with 15- or 20-watt bulb at a distance of not less than 1 meter. Safelight Tolerances of film (Fujifilm Safelight Filter SLG BU, 100V 20-watt bulb, distance 1 meter.) 0.5 0.4 Fog Density 0.3 0.2 on 0.0 0 2 4 6 8 10 Exposure time [min.] ‘The fog density means the increasing fog value form the no safelight exposure, Processing conditions: Automatic Processing Developer Development Temperature Audel 26 °C (78°F) 28 °C (82 °F) Development Immersion Time Fixing Temperature Replenishment Rate for Developer 8.5 x 30.5 cm, 4 films Fixer 100 seconds 100 seconds 31°C (88 °F) about 65 ml about 200 ml Wash water Temperature Less than 31 °C (88 °F) Drying Temperature About 45 °C (113 °F)DATA SHEETS + FUJIFILM RADIOGRAPHIC FILM Manual Processing Process Chemical Temperature Time Developing _Hi-RENDOLT 20°C (86°F) 5 minutes Stop bath (Acetic Acid 3% solution) _18 to 22 °C (64to 72 °F) _30 seconds Fixing Hi-RENFIX I 18 to 22 °C (64 to 72 °F) _5 to 10 minutes Washing (Running water 2 to 4 L/min) 18 to 22 °C (64 to 72 °F) _50 minutes Drying (Washing Agent) 18 to 22 °C (64 to 72 °F) 30 seconds - Ca, 60 °C (Ca. 122 °F) - Development Rate IXS0XD Ix80XD IX100XD 2 10 wo oo |e je | [a 5 E 5 2 a 2 Booz Bar Ba » os Gop os »o3s Go os 13 Gos Development Tne on Development Tne in Devopment ne in) Relative Speed: Average Gradient: Fog: Relative value at a density of Gradient of line between the Fog and base density 2.0 above fog and base density points of 1.5 and 3.5 density on the value of 100 above fog and base density on when developed for 5 minutes _the characteristic curve