Indexable Inserts

04/03
Index

Guidelines for selecting inserts Unisix® Inserts Page

(depending on material to be machined) W 00 (WOHX) regular 26 – 28
W 01 (WOHX) heavy duty 29 – 31
Color Code Material to be machined
W 01..55/57 (WOGX) 32
Cast iron / graphite cast iron
Non-ferrous metals
Stainless steel W01 (WOHX) 33
Mild steel / tool steel
W 04 (WNHX) 6-cutting edges 34 – 35
W 05 (WNHX) 6-cutting edges 34 – 35

W 24..01 36
W 24..11 36
Example: W 24..13 37
Inserts with molded chipbreaker
W 27..00 38
W 27..01 38
W 27..10 39

W 28..00 (WOEX) regular 41

W 29..00 (WOEX) heavy duty 40

W 28..01 (WOEX) regular 43

W 29..01 (WOEX) heavy duty 42

W 28..02 (WOEX) regular 45

W 29..02 (WOEX) heavy duty 44

Material color shown determines W 28..03 (WOEX) regular 47

carbide grade recommended W 29..03 (WOEX) heavy duty 46

W 29..11 (WOEX) 48
W 29..13 (WOEX) 49

Inserts for Machining Aluminium

Example:
Page
Inserts with ground chipbreaker
W 32..55 (TPHB) 60

W 32 (TPHX) 58– 59

W 32 (TPHB) 61
W 37 (TEHB) 62
W 57 (TOGX) 63
W 58 (TPGX) 64

W 83 (SPGT / SPGW) 70– 71

W83 (SPGW) 70

Material color shown determines

W85 (CPGT / CPGW) 72– 73
carbide grade recommended
Material color shown determines
angle of chipbreaker used W85 (CPGW) 72 – 73
Inserts Page Inserts Page
W 30 (TOHX) 50 – 53
W 83 (SNMA / SNMN / SNMG) 82
W 30 (TOHX) 52 (SCMT) 82

W 30..31 (TOHX) 54 W 83 (SOEX) 83

W 30..32 (TOHX) 55

W 30..39 (TOHX) 54 W 84 (TNMG / TCMT) 84 – 85

W 30 (TOGX) 56 – 57
W 85 (CNMA/CNMM/CNMG/CNMZ) 86
W 34 (TOHT) 62 (CCMT) 87

W 57 (TOHX) 63 W 86 (DNMG / DCMT) 88 – 89

W 59 (TOHT) 65
W 89 (VNMG / VNMP) 90
(VCMT / VBMT) 90

W 60 (DOHT / DOHW) 66 – 67 W 90 (WNMA / WNMG / WNMZ) 91

W 95 (RCMT) 91
W 60 (DOGW) 67

W 97 ISO thread 60° 92

W 78 (VOHT / VOGW) 68

W 79 (DOHT) 69 Descriptions Page

Cutter geometry – Areas of use 3 – 16

Inserts Page Carbide selection 17

Q 09 (SPGW / SPMT) 74 Application examples 18 – 19

(SEHW / SEHT) 75
Cutting recommendations 20 – 23
Q 12 (TCAA / TNAA) 76 Numerical coding for inserts 24 – 25
(TPAX / TNAX) 76
(TPAX / TCAX / TNAX) 77 ISO-Code for inserts 80 – 81

Q 15 (CPMT / CPMW) 78 Insert clamping screw information 93 – 95

Insert clamping screw for ISO inserts 96 – 98

Q 21 (EDHQ) 78
Cross reference list 100 – 107

Numerical index 108 – 111

Q 36 (APKT) 79

1
 Precision inserts for economical cutting

Only carefully and constantly monitored carbide grades and coatings are used for KOMET® Unisix®
inserts. The combination of top quality carbides and coatings with high precision KOMET® Unisix®
inser ts pr
inserts ovides an indispensible component of moder
provides n pr
modern oduction technology
production technology..

2
Unisix® Inserts

W 00... / W 01... (WOHX...) Application range:

W00... (regular) / W01... (heavy duty) 왘 External and internal turning for R.H. and
L.H. design
Inser
Insertt geometr y:
geometry: 왘 Double Inser
Insertt TTools
ools
왘 Special tools
ground ground
chip surface chipbreaker 왘 KOMETRIC® mounted cartridges
Positive insert geometry produces efficient cutting
chipbreaker with results. Particularly suitable for lower output
6°, 12° or 20°
top rake
machines and unstable workpieces. Good,
controllable chip formation in materials with low
8° 8° tensile strength.
26 – 31

W 01.....34 / 35 (WOHX...)
Application range:
왘 KUF Milling Cutter
Inser
Insertt geometr y:
geometry: Positive Insert geometry produces efficient cutting
ground results.
chipbreaker
Particularly suitable for low output machines and
chipbreaker with
unstable materials. The secondary cutting edge
6° top rake ground in line with the approach angle produces
good surface finish even at high feed rates.
8°
31

W 01.....55 / 57 (WOGX...) Application range:

PCD application range
Machining non-ferrous metals, plastics,
composites, rubber, graphite, etc.
Inser
Insertt geometr y:
geometry: CBN application range (CBN 57)
sharp cutting edge with Machining cast iron materials etc. Inserts with
cutting edge a land PCD and CBN cutting edges have the following
advantages:
PCD CBN
cutting cutting
왘 high cutting speeds
edge edge 왘 high dimensional consistency
8° 8°
왘 extremely long tool life
왘 high quality surface finish 32

W 01.....75 / 90 (WOHX...)
Application range:
Roughing and semi finish machining tools
Inser
Insertt geometr y:
geometry: with multiple inserts.
cutting edge (Z= 2 – 12)
honed 왘 roughing and semi finishing
왘 GG, GGG and GGV - materials
왘 higher feed rates
왘 high quality surface finish
8°
왘 support chamfer for ⑂ =90° and ⑂ = 75°
33 3
 Unisix® Inserts

W 04... / W 05... (WNHX...)

Application range:
Inser
Insertt geometr y:
geometry: 왘 Internal and external turning
The Unisix insert with 6 cutting edges is an efficient
ground chipbreaker
and economic insert. The six cutting edges can be
used because of the negative insert seating.
18°
The positively ground chipbreakers guarantee a
good chip form and a soft cut.
18°

ground chipbreaker
34 – 35

W 24.....01
Application range:
왘 Drilling into the solid
Inser
Insertt geometr y:
geometry: 왘 Special tools
molded Excellent for all roughing operations for which
chipbreaker turning accuracy of peripheral ground inserts is
cutting edge not essential.
honed and land Suitable for medium and high tensile strength
steels and cast irons, subject to grade.
8°
36

W 24.....11
Application range:
with BK77 coating
Inser
Insertt geometr y:
geometry: For cutting aluminum alloys and plastics at medium
cutting speeds. Tough characteristics with a high
highly positive
chipbreaker resistance to build-up on cutting edges.
with BK50 coating
cutting edge For cutting aluminum alloys, abrasive materials,
honed
graphite, plastics and bonded materials at high
cutting speeds.
8°
36

W 24.....13 Application range:

with BK71 coating
Multiple layer CVD coating with maximum wear
resistance on a tough substrate. Drilling into the
Inser
Insertt geometr y:
geometry: solid in the medium to high cutting speed range in
highly positive structural and carbon steels and in stainless and
chipbreaker acid-resistant steels.
cutting edge with BK79 coating
honed A wear-resistant PVD coating on a tough P40
substrate. Drilling into the solid in the low to
medium cutting speed range. Particularly suitable
8°
as internal inserts and with interrupted cut.
4 37
W 27..00... Application range:
왘 Drilling into the solid < .945 inch diameter
A mixture of parts are normally used on
Inser
Insertt geometr y:
geometry: solid boring tools. Here a coated insert is used as
the external cutting edge and an uncoated insert
molded molded
chipbreaker chipbreaker for the internal cutting edge.
The 95° cutting angle increases the stability of the
cutting edge cutting edge insert and produces a clear improvement in
honed honed and land
machining safety.
Optimum chip form at a feed of f ⬉ .0023in.
8° 8° Used as a central insert only.
38

W 27..01... Application range:

왘 Drilling into the solid < .945 inch diameter
A mixture of parts are normally used on
Inser
Insertt geometr y:
geometry: solid boring tools. Here a coated insert is used as
the external cutting edge and an uncoated insert
molded molded
chipbreaker chipbreaker for the internal cutting edge.
The 95° cutting angle increases the stability of the
cutting edge cutting edge insert and produces a clear improvement in
honed honed and land
machining safety.
Due to additional T-land the insert is more resistant
8° 8° to edge chipping.
38

W 27..10... Application range:

왘 Drilling into the solid < .945 inch diameter
A mixture of parts are normally used on
Inser
Insertt geometr y:
geometry: solid boring tools. Here a coated insert is used as
the external cutting edge and an uncoated insert
molded molded
chipbreaker chipbreaker for the internal cutting edge.
The 95° cutting angle increases the stability of the
cutting edge cutting edge insert and produces a clear improvement in
honed honed and land
machining safety.
The chip is corregated which makes it easier to
8° 8° break.
39

5
 Unisix® Inserts

Application range:
W 28..00 / W29..00 (WOEX...) 왘 External and internal turning
W28... (regular) / W29... (heavy duty) 왘 Double insert tools
왘 Drilling into the solid
왘 Special tools
Inser
Insertt geometr y:
geometry:
왘 KOMETRIC® mounted pockets
molded double
Because of the slightly honed cutting edges, cutting
chipbreaker
efficiency is extensively maintained. Length and
cutting edge face turning possible with peripheral chip guide
honed step. Drilling into the solid for all low tensile
strength materials.
8° Note: Can only be used as inner cutting edge for
solid drilling under certain conditions. 40 – 41

W 28..01 / W29..01 (WOEX...)

W28... (regular) / W29... (heavy duty)
Application range:
The main application area for this insert is used on
Inser
Insertt geometr y:
geometry: the KUB Insert Drills, KUB Trigon Insert Drills and
molded double for turning.
chipbreaker The chamfering and the slight rounding protects
cutting edge against fracturing.
honed with land The Unisix® insert has become established inter-
nationally for drilling into the solid.
8°
42 – 43
Application range:
W 28..02 / W29..02 (WOEX...) 왘 Drilling into the solid
W28... (regular) / W29... (heavy duty) 왘 Double insert tools
왘 Special tools
Inser
Insertt geometr y:
geometry: Excellent for interrupted cut because of stable
step geometry
cutting angle (82°) (top rake 0°) and cutting edge
molded with T-land.
A first class chipbreaker also produces good chip
cutting edge
honed with land formation even from difficult materials.
Cutting edge honed with T-land.
For cutting depths of < .06 in, the chipbreaker is
8° not effective as the step geometry is molded over
the complete periphery. 44 – 45
Application range:
W 28..03 / W29..03 (WOEX...) 왘 Drilling into the solid
W28... (regular) / W29... (heavy duty) 왘 Double insert tools
왘 Special tools
Inser
Insertt geometr y:
geometry: 왘 Internal and external turning
The dimple shaped chipbreaker causes a different
dimple molded chip flow action.
cutting edge
The chip is corregated in cross section and tends
honed to break more easily.
Note:
Can only be used as centre insert for solid drilling
8° under certain conditions. Not recommended for
6 interrupted cut. 46 – 47
W 29..11 (WOEX...)
Application range:
with BK77 coating
For cutting aluminum alloys and plastics at medium
Inser
Insertt geometr y:
geometry: cutting speeds.
highly positive Tough characteristics and a high resistance to
chipbreaker build-up on cutting edges.
cutting edge with
with BK50 coating
minimum hone For cutting aluminum alloys, abrasive materials,
graphite, plastics and bonded materials at high
cutting speeds.
8°
48
Application range:
W 29..13 (WOEX...) with BK74 coating: Multiple layer CVD coating with
maximum wear resistance on a tough substrate.
Drilling into the solid in the medium to high cutting
Inser
Insertt geometr y:
geometry: speed range in structural and carbon steels and in
stainless and acid-resistant steels.
highly positive
chipbreaker with BK79 coating: A wear-resistant PVD coating on
a tough P40 substrate.
cutting edge
honed
Drilling into the solid in the low to medium cutting
speed range. Particularly suitable as internal inserts
and with interrupted cut.
8° with BK84 coating: Wear resistant PVD coated insert
for universal use for medium and larger feed ranges. 49

7
 Inserts

Application range:
W 30 ... (TOHX...) 왘 Internal and external turning
왘 Small boring bars
왘 Fine machining, internal and external
왘 Countersink tools, end mill cutters
Inser
Insertt geometr y:
geometry:
Peripheral ground triangular insert. Can be turned over
neutral chipbreaker
with high changeover accuracy because of precision 2-
chip surface ground
sided contact. Large selection of ground chipbreakers
chipbreaker and carbides suitable for almost any materials
6°, 12° or 20°
top rake 왘 L.H. and R.H. ground chipbreakers
왘 Neutral chipbreakers
8° 8° 왘 positive ground chipbreakers for countersink tools
and milling cutters. 50 – 53

W 30 .....31 (TOHX...)
Application range:
왘 Internal turning
Insertt geometr
Inser y:
geometry:
with high feed rates for stable conditions for tools
chipbreaker up to a max. of 2.5 ⫻ D
ground
Ideal cutting depths:
chipbreaker
6° or 12° Steel ap = .004 – .010 in
top rake Cast iron ap = .006 – .012 in

8°
54
Application range:
W 30 .....32 (TOHX...) 왘 Small boring bars
왘 Internal fine machinig
Because of the positive cutting edge geometry, cutting
Inser
Insertt geometr y:
geometry: is very efficient. A deeper, narrow chipbreaker produces
chipbreaker
a controlled chip even from materials that produce long
ground chips and at narrow cutting depths. A flat ground
secondary cutting edge provides increased corner
chipbreaker stability. Can be supplied in Cermet for sharp-edged
12° top rake
version.
Ideal Cutting depth: Steel ap = .0004 – .006 in
8° Only suitable for non-ferrous metals in certain
circumstances. 55

W 30 .....39 (TOHX...)
Application range:
Sharp cutting edge.
Inser
Insertt geometr y:
geometry:
Insert with .002 in nose radius for internal
chipbreaker
machining for tools with long overhang.
ground
Ideal cutting depths:
chipbreaker Steel ap = .001 – .004 in. (0.02 – 0.1 mm)
12° top rake
Non-ferrous metal ap = .002 – .010 in.(0.05 – 0.25 mm)

8°
8 54
 Application range:
W 30 .....57/40 (TOGX...) Internal and external machining, fine turning.
Inserts with cutting edges have the following
CBN advantages:
Inser
Insertt geometr y:
geometry: 왘 high cutting speeds
honed 왘 high dimensional consistency
cutting edge 왘 extremely long tool life
왘 high quality surface finish
CBN cutting edge CBN 57: Preferably for cast materials and alloys
on a nickel cobalt base.
8°
CBN 40: For machining hardened steels (harder
than 45 HRC)
56

W 30 .....55 / W 32 .....55
W30...55 (TOGX) / W32...55 (TPHB)
PCD Application range:
Inser
Insertt geometr y:
geometry: Internal and external machining, fine turning of non-
W30...55 (TOGX) W32...55 (TPHB)
ferrous metals, plastics, composites, rubber,
sharp sharp
cutting edge cutting edge
graphites, etc.
High cutting speeds, good dimensional accuracy,
PCD PCD above-average surface finish and extremely good
cutting cutting tool life are all features of these PCD tipped inserts.
edge edge

8° 11°
56 – 60

W 32 ... (TPHX...)

Application range:
Inser
Insertt geometr y:
geometry:
11° TPHX inser
insertt with polished chip sur face
surface
precision ground
chipbreaker for softer aluminum materials and other non-ferrous
metals.
10 - 15° top rake with axial and radial tilt.

11°
58 – 59

W 32 ..60... (TPHB...)

Application range:
Inser
Insertt geometr y:
geometry:
11° TPHB inser
insertt with polished chip sur face
surface
polished
chip surface for high tensile strength cast aluminum alloys.
5° top rake due to axial tilt for cutting speed range of
⬉ 950 sfm.

11°
61 9
 Inserts

W 34 ... / W 59 ... (TOHT...)

Application range:
Inser
Insertt geometr y:
geometry: 왘 Multi-tooth milling cutter
W34.. ground chipbreaker 6° Peripheral and surface ground triangular insert for
W59.. molded chipbreaker 10° roughing and facing operations:
chipbreaker with 2-sided contact produces a very high changeover
6° or 10° top rake accuracy when changing the insert.

8°
62 / 69

W 37 ... (TEHB...)

Inser
Insertt geometr y:
geometry: Application range:
20° TEHB inser
insertt with polished chip sur face
surface
polished
chip surface for softer aluminum materials and other non-
ferrous metals.
10 – 12° top rake with axial and radial tilt.

20°
62

W 57..04 (TOHX...) Application range:

왘 Internal and external turning
왘 Fine finish turning
The positive Insert geometry and the peripheral
Inser
Insertt geometr y:
geometry: ground clearance faces ensure low cutting forces
molded with high changeover accuracy.
chipbreaker Particularly suitable for steel materials of all grades.
Application range up to 3.5 ⫻ D
Ideal cutting depths:
Steel ap = .002 – .008 in (0.05 – 0.2 mm)
Only suitable for some aluminum and non-ferrous
8°
materials in certain circumstances.
63

W 57..12 (TOGX...)
Application range:
왘 Internal and external turning
왘 Fine finish turning for aluminum materials
Inser
Insertt geometr y:
geometry: 왘 for softer aluminum materials and other non-
highly positive ferrous metals.
molded chipbreaker The high positive cutting geometry and the ground
clearance surface quarantee a controlled chip
formation and high quality surface finish with low
cutting force.
8°
10 63
 W 58..12 (TPGX...)
Application range:
왘 Internal and external turning
왘 Fine finish turning for aluminum materials
Inser
Insertt geometr y:
geometry: 왘 for softer aluminum materials and other
highly positive non-ferrous metals.
molded chipbreaker The high positive cutting geometry and the
ground clearance surface quarantee a
controlled chip formation and high quality
surface finish with low cutting force.
11°
64

W 60 ... (DOHT... / DOHW...)

Application range:
왘 External and internal copy turning
Inser
Insertt geometr y:
geometry: Because of the positive cutting edge geometry,
neutral chipbreaker cutting is very efficient.
chip surface ground Particularly suitable for long overhang and for
chipbreaker thin-walled materials.
6°, 12° or 20° The large selection of ground chipbreakers and
top rake
carbides will suit almost any materials.
8° 8°
66 – 67

W 60 .....55 / W 78 .....55
W60.....55 (DOGW...) / W78.....55 (VOGW...)
Application range:
Inser
Insertt geometr y:
geometry: PCD Internal and external machining, fine turning of
non-ferrous metals, plastics, composites, rubber,
sharp
cutting edge graphites, etc.
High cutting speeds, good dimensional accuracy,
PCD suited for production application where consistant
cutting close tolerances are necessary
edge

8°
67 – 68

W 60 ....57/40 / W 78 ....57/40 Application range:

Internal and external machining, fine turning.
W60.....57/40 (DOGW...) / W78 .....57/40 (VOGW...)
Inserts with cutting edges have the following
advantages:
Inser
Insertt geometr y:
geometry: CBN 왘 high cutting speeds
milled 왘 high dimensional accuracy
cutting edge
왘 extremely long tool life
CBN
왘 high quality surface finish
cutting CBN 57: Preferably for cast iron materials and
edge alloys on a cobalt nickel base.
8° CBN 40: For machining hardened steels (harder
than 45 HRC) 67 – 68 11
 Inserts

W 78 ... (VOHT...)
Application range:
Inser
Insertt geometr y:
geometry: 왘 External and internal profile turning
The molded chipbreaker allows universal
molded
chipbreaker
application.
The positive Insert geometry and peripheral ground
clearance faces produce low cutting forces with
high changeover indexablility.

8°
68

W 79 ... (DOHT...)
Application range:
Inser
Insertt geometr y:
geometry: 왘 External and internal profile turning
The molded chipbreaker allows universal
molded
chipbreaker application.
The positive Insert geometry and peripheral ground
clearance faces produce low cutting forces with
high changeover indexablility.

8°
69
Application range:
W 83 ... (SOEX...) SOEX...-01 왘 solid drilling
왘 special tools
SOEX...-01: Optimum solution for all roughing
Inser
Insertt geometr y:
geometry: operations in which changeover accuracy of peripheral
SOEX...-01 SOEX...-13
ground insert is not essential. Suitable for medium and
molded molded, highly SOEX...-13
chipbreaker positive chipbreaker hardened steels and cast iron according to quality.
All-r ound geometr
All-round geometryy : Wear-resistant insert for
cutting edge cutting edge universal use for internal and external cutting.
honed honed SOEX...-13: Optimum solution for steel with low carbon
content and for stainless steels. Suitable for medium to
8° 8° high cutting speeds for internal and external cutting
edge. 83

W 83 ... / W85 ...

W83... (SPGW) / W85... (CPGW) Application range:
with K10 and BK77 coating
Inser
Insertt geometr y:
geometry: For cutting aluminum materials and plastics at
medium cutting speeds. Tough grades and high
polished
chip surface
resistance to build-up on cutting edges.
with PCD
Polycrystalline diamond cutting material for cutting
aluminum materials, abrasive materials, plastics and
compound materials at high cutting speeds.
11°
12 70 – 71
 Q 09 ... (SPGW...)

Application range:
Inser
Insertt geometr y:
geometry: 왘 T slot cutter
Precision inserts ground on all sides with honed
cutting edges. Suitable for machining steel and
cast iron materials in conjunction with positive
axial position.
11°

74

Q 09 ... (SPMT...)
Application range:
Inser
Insertt geometr y:
geometry: 왘 Chamfering
molded
Inserts with molded positive chip breaker and
honed cutting edge. Because of its positive chip
geometry, this insert produces a good cutting
result even under difficult and critical cutting
conditions.
11°

74

Q 09 ... (SEHW...AFTN)
Application range:
왘 Face milling cutter
Inser
Insertt geometr y:
geometry:
Insert precision ground on all sides. Main cutting
edge stabilised by chamfering.
Particularly suitable for heavy duty cutting through
45° rolling mill or forge skin, at medium cutting speeds.
Used particularly for steel and cast iron materials
with medium to high tensile strength.

75

Q 09 .....02 (SEHW...AFTN-V) Application range:

왘 Face milling cutter
Inserts precision ground on all sides, with
chamfering (blending radius) from main to
Inser
Insertt geometr y:
geometry: secondary cutting edge. The insert provides a
specially shaped, positive Insert geometry for
machining CrNi and unusual materials.
45° Materials which tend to produce a build-up on the
cutting edge can also be successfully machined
with this geometry.
Used in the lower cutting speed ranges with medium
chip cross sections.
R1
75 13
 Inserts

Q 09 ... (SEHW...AFTN-V)
Application range:
왘 Face milling cutter
Inserts precision ground on all sides for roughing
Inser
Insertt geometr y:
geometry: and finishing at medium to high cutting speeds
and feed rates.
Main cutting edge stabilized by chamfer. The
45° rounded transition to the sharp secondary cutting
edge produces a high quality surface finish.
The wide application range is particular suitable
for steel and cast iron materials.
R1 75

Q 09 ... (SEHW...AFTN-V20) Application range:

왘 Face milling cutter
Inserts precision ground on all sides, with
Inser
Insertt geometr y:
geometry: chamfering (blending radius) from main to
secondary cutting edge.
A chamfer around the cutting edge prevents
45°
fracturing and produces good tool life, even for
heavily interrupted cuts.
When machining cast material with silicon nitride
at high cutting speed, this chamfer produces a
high degree of stability on the cutting edge.
R1 75

Q 09 ... (SEHW...AFTN-20)
Application range:
왘 Face milling cutter
Inserts precision ground on all sides, with
Inser
Insertt geometr y:
geometry: chamfering (blending radius) from main to
secondary cutting edge. A chamfer around the
cutting edge prevents fracturing and produces
45° good tool life.
The insert is particularly suitable for roughing for
medium to heavy-duty cutting (rolling mill and
forge skin or frequently interrupted cut).
75

Q 09 .....14 (SEHW...AFFN-V) Application range:

왘 Face milling cutter
Insert precision ground on all sides, with
Inser
Insertt geometr y:
geometry: chamfering (blending radius) from main to
secondary cutting edge.
The cutting edge geometry is designed for medium
45°
to high cutting speeds with medium to small chip
cross section.
Because of the blending radius, a finished surface
is produced in conjunction with the facing chamfer.
Not suitable for heavily interrupted cuts.
14 R1
75
 Q 12 ... (TCAA.../TNAA...)

Application range:
Inser
Insertt geometr y:
geometry: 왘 Slot milling cutter
8° 왘 Slot milling cutter adapter
Positive chip angle produces soft cut.
The cutting edge is designed for machining steel or
cast iron/aluminum.

76
Application range:
Q 12 ... (TPAX.../TCAX.../TNAX...) 왘 Cir cular milling
Circular
Internal and external circular milling of longitudinal
or annular slots for snap rings.
Inser
Insertt geometr y:
geometry: The cutting edge geometry produces a good
machining result for steel, cast iron and aluminum
0° top rake bH13
when used with the appropriate carbide grades.
Design:
Dimension b is aligned with the slot width to H13
tolerance for snap rings to DIN 471 and DIN 472.
This relates to the upper tolerance limit for the slot
widths which can be still be produced to the
correct dimension after wear. 77

Q 15 ... (CPMT...)

Application range:
Inser
Insertt geometr y:
geometry: 왘 T Slot Cutter
molded Inserts with molded peripheral positive chip guide
and cutting edge with a land.
Particularly suitable for T slot cutting for steel
materials.

11°

78

Q 15 ... (CPMW...)

Inser
Insertt geometr y:
geometry: Application range:
왘 T Slot Cutter
Insert with a land on cutting edge.
Because of its cutting geometry, particularly
suitable for machining cast iron materials.
11°

78 15
 Inserts

Q 21 ... (EDHQ...)
Application range:
왘 Slot milling cutter with cartridge
Insert fitted tangentially in cartridge. Twin-edged
Inser
Insertt geometr y:
geometry: insert precision ground on all sides in R.H. or L.H.
version.
Positive chip geometry in radial and axial direction
(staggered teeth) produces good cutting results.
15°
Can be used universally in appropriate carbide
grades for steel, cast iron or aluminum.

78
Application range:
Q 36 ... (APKT...) 왘 Corner milling cutter
왘 Shell end face milling cutter
왘 End milling cutter
Insertt geometr
Inser y:
geometry: 왘 Face milling cutter 75°
molded Highly positive cutter geometry with specially
designed face cutter allows high feed rates and a
good surface quality.
Soft cutting also possible even with unstable
machining conditions. The special cutter geometry
12° allows the insert to be used universally in the
appropriate grades both for machining steel, cast
iron and aluminum. 79

Q 36 ... (APKT...)
Application range:
왘 Copy end milling cutter
Inser
Insertt geometr y:
geometry: A special cutter geometry whose main feature is a
positive peripheral top rake, produces a soft cut
molded
particularly in the radius range of the insert; this
requires low cutting forces and produces good
chip formation.
The insert can be used universally in various
12° carbide grades both for steel and cast iron.

79

16
Carbide selection
Main area of application


ISO-group P K
(ANSI) Cast iron, Chilled cast iron
Steel, Cast steel, Stainless steel
Non-ferrous metals
KOMET
P01 P10 P20 P30 P40 P50 K01 K10 K20 K30
(ISO 513)
P05 P15 P25 P35 K05
(C8) (C7) (C6) (C5) (C5) (C5) (C4) (C3) (C2) (C1)
Uncoated
carbide grades P10 P25M P40 K10
(HW)
P35 K20

Coated BK72 BK62

carbide grades (BK) (BK1)
(HC)
BK84
BK85 BK68

BK3
BK77

BK4
BK50
BK68
BK78

BK79 BK74
BK87

BK66

BK74

BK80

CERMET
(HT) CK32 CK32

CK30 CK30

CK37 CK37

CERMET
(H) CK38 CK38

HSS
coated BK89

Silicon
nitride (CN) SK44

CBN (BN)
CBN57 / CBN40

PCD (DP)
PCD55

ⴙ Wear resistance ⴚ
ⴙ Wear resistance ⴚ

ⴚ Toughness ⴙ
ⴚ Toughness ⴙ

17
 Application examples

Cutting Carbide Application Application

material code D = Drilling
T = Turning
M = Milling
R = Roughing
FB = Fine Boring

P 10 01 T Turning operations with medium to low cutting depths without interrupted cut.

P 25 M 03 D/T/M/R/FB Uncoated carbide with excellent wear resistance and good toughness factor. Suitable for medium to high cutting
speeds for roughing and finishing, also for interrupted cut. For non-alloy steel, malleable cast iron, stainless steel
and cast steel.

P 25 12 D/T/M/R/FB Uncoated carbide with excellent wear resistance and good toughness factor. Suitable for medium to high cutting
speeds for roughing and finishing. For non-alloy steel, malleable cast iron, stainless steel and cast iron.

P 35 14 T Uncoated carbide for turning operations with suitable toughness factor and good resistance to wear.

P 40 04 D/T/M/R Uncoated carbide with medium wear resistance at optimum toughness factor. Low to medium cutting speeds for
roughing and with heavily interrupted cut. Also for unstable working conditions. For non-alloy steel, die steel and
stainless steels.

K 10 21 D/T/M/R/FB Chamfered and neutral cutter geometry suitable for all grades of cast iron. Positively sintered (PD) and ground
geometry is used for aluminium. e.g.: 12° and 20° top rake, ground sharply and not rounded.

K 10 23 T/R/FB A fine grained carbide with high wear resistance and heat resistance. Used for aluminum machining.

K 20 22 M Uncoated carbide with large application range for cast iron materials. Medium to high cutting speeds for roughing
and finishing; wet and dry machining also possible. For cast iron, malleable cast iron, aluminium/ copper/brass
and bronze alloys; main application area in milling.

CK 30 30 FB CERMET cutting material for fine and finish turning. High toughness factor, low wear and comparatively high
cutting speeds produce longer tool life and high surface quality.

CK 32 32 FB CERMET cutting material for fine and finish turning. Low wear and comparatively high cutting speeds produce
longer tool life and high surface quality.

CK 37 37 M/FB CERMET cutting material enables interrupted cut and light roughing operations with well-balanced wear
resistance and toughness ratio.

CK 38 38 FB TiCN/TiN coated CERMET cutting material with high toughness factor and extremely good wear resistance. This
cutting material has a wide range of applications in non-alloy and alloy steel, die steel, rust-resistant and stainless
steels and cast irons.

CK 39 39 T CERMET cutting material for fine and finish turning. High toughness factor, low wear and comparatively high
cutting speeds produce longer tool life and high surface quality.

BK 60 D/T/R/FB TiC/TiN multiple coating on P 25 M carbide base. High tool life, even in the higher cutting speed range.

BK 1 61 D/T/R/FB Aluminium oxide coating (ceramic) for higher cutting speeds in all cast iron materials. Only suitable for interrupted
cut to limited extent. Not for use with aluminium materials.

BK 3 63 D/R TiC/TiN multiple coating on P 25 base. Only available as dimple inserts.

BK 4 64 D/T/M/R/FB TiC/TiN multiple coating on P 40 carbide base. Suitable for interrupted cut.

BK 50 50 D/R/FB Crystalline diamond coating for cutting aluminium alloys, abrasive materials, graphite, plastics and bonded
materials at high cutting speeds.

BK 62 62 D/T/R/FB TiCN and Al2O3-CVD-coating for higher cutting speeds in all types of cast iron materials. Only limited suitability
for extreme interrupted cut. Not suitable for aluminium materials.

BK 66 66 T TiC/TiN multi-layer coating for turning.

18
Cutting Carbide Application Application
material code D = Drilling
T = Turning
M = Milling
R = Roughing
FB = Fine Boring

BK 68 68 M TiC/TiN multiple coating on carbide. Medium to high cutting speeds for roughing and finishing and with
interrupted cut. For non-alloy steel, cast steel, die steel and cast iron.

BK 69 69 D/T/R Extremely tough with maximum wear resistance combined with a CVD multi-layer coating (TiCN, Al2O3, TiN)
makes this type perfect for full cut at high cutting speeds in steel, cast steel and stainless steels.

BK 72 72 D/T/R/FB A cutting material with a tough substrate and CVD multi-layer coating of TiCN, Al2O3 and TiN for machining non-
alloy and alloy steels, die steels and cast steel. Ensures long tool life even at high cutting speeds.

BK 74 74 D An extremely tough carbide substrate with a CVD multi-layer coating in TiCN and Al2O3. For machining rust-
resistant and stainless steels.

BK 75 75 T CVD multi-layer coating (TiCN / Al2O3 / TiN) on tough carbide substrate for turning non-alloy and alloy steels, die
steels and cast steel.

BK 76 76 T TiCN and Al2O3 CVD multi-layer coating for turning stainless steels, carbide steels with low tensile strength and
cast materials.

BK 77 77 D/M/R/FB A tough PVD coated grade for cutting aluminium alloys and plastics at medium cutting speeds. Tough
characteristics and a high resistance to build-up of cutting edges.

BK 78 78 M TiAlN coated carbide on P 25 M base with extremely high wear resistance. Medium to high cutting speed for
roughing and finishing and with interrupted cut. For non alloy steel, cast steel and die steels.

BK 79 79 D/R/FB TiAlN coated carbide on P40 base with extremely high wear resistance. Medium to high cutting speed for roughing
and finishing and with interrupted cut. For non-alloy steel, cast steel, die steels and rust-proof and stainless steels.

BK 80 80 M TiCN coated carbide for milling with a wide range of applications in steel and cast iron materials. Excellent balance
between wear resistance and srength makes this suitable for universal use.

BK 84 84 D/T/R/FB An TiCN/TiN-PVD coated grade which combines toughness with good wear resistance. For machining steel, cast
steel and stainless steel. Because of the PVD coating, BK84 is the preferred alternative to uncoated carbide grade
P25M for internal inserts for insert drills (less build-up on cutting edges). BK84 is also suitable for external inserts
on insert drills and for interrupted cut.

BK 85 85 M TiN coated carbide with optimum wear resistance and high toughness factor. Medium and high cutting speeds
for roughing and finishing. For non-alloy and alloy steels and cast steel.

BK 87 87 M TiN coated carbide on P40 base. Medium to high cutting speeds for roughing and finishing and with interrupted
cut. For non alloy steel, cast steel and die steels.

BK 89 89 D TiN coated HSSE high quality, high speed steel for unusual materials, Ti alloys, Ni and Co alloys and austentic
steels. Used for low cutting speeds with medium to high feed rates. Coolant essential.

PCD 55 55 T/FB Polycristalline diamond cutting material for turning aluminium, ceramics and plastics.

CBN 40 40 T/FB Cubic boron nitride material for turning hardened steels with an HRC of over 45, high heat resistant alloys on nickel
or cobalt base.

CBN 57 57 T/FB Cubic boron nitride for machining cast materials, powder metallurgical materials and high temperature alloys.

SK 44 44 M Silicon nitride. Ceramic material with extremely high wear resistance and high toughness factor for roughing and
finishing cast iron. High to very high cutting speeds.

19
 Cutting recommendations
Note:
KUB Trigon® 쏗 .472 - 1.768 in. and The application details shown depend on the environmental and application
conditions (e.g. machine, ambient temperature, use of lubricant/coolant and the
KUB® Solid Drill > 쏗 1.772 in. machining result required). These are subject to correct operating conditions,
correct application and compliance with the spindle speed limits given for the tools.

W29 ..01 W29 ..02 W29 ..03 W29 ..00 W01 ..60 W29 ..11 W29 ..13

Cutting edge Cutting edge Cutting edge honed Cutting edge honed Cutting edge Cutting edge Cutting edge
honed land honed land honed honed honed

coated  coated  coated  coated coated  coated  coated

 uncoated uncoated  uncoated

Material HardnessCutting Feed max. f (in/rev) Outside Inside

speed Boring depth 2 x 쏗 / 3 x 쏗 Boring depth 4 x 쏗 inserts

Wear resistance
inserts Mild steel / tool steel
vc ⭋ .47 ⭋ .55 ⭋ .78 ⭋ .98 > < ⭋ ⭋ .78 ⭋ .98 coated coated
BK 72 / BK
(HB) (ft/min) ⫺.55 ⫺.78 ⫺.98 ⫺1.77⭋ 1.77 .78 ⫺.98 ⫺1.77 uncoated uncoated
Mild steel BK3
up to 760 .001 .002 .003 .003 .004 .001 .002 .002
  

150 -990 -.002 -.004 -.005 -.006 -.006 -.003 -.004 -.005   BK4

BK79 BK84
Free cutting steel P25M
up to 660 .002 .002 .003 .004 .005 .002 .002 .003


150 -930 -.003 -.005 -.006 -.007 -.008 -.004 -.005 -.006   P40

Toughness
Mild case-hardened
and heat-treated 150 600 .002 .002 .003 .003 .004 .002 .002 .002


-220 -825 -.003 -.004 -.005 -.006 -.006 -.003 -.004 -.005 
steels
Heat steel 170 350 500 650 800 950 1150
200 460 .002 .002 .002 .003 .004 .002 .002 .003


alloyed Cr and CrMo  Cutting speed vc = ft/min
-260 -660 -.003 -.003 -.005 -.006 -.006 -.003 -.004 -.005
steels
Tool and heat-
Wear resistance
460 .001 .002 .002 .002 .004 .001 .002 .002

 Stainless steel
treated steels 
< 250 -660 -.002 -.003 -.004 -.005 -.006 -.002 -.003 -.004 BK 72 / BK
BK74

360 330 .001 .001 .002 .002 .002 .001 .001 .002

-560 -500 -.002 -.002 -.003 -.004 -.005 -.002 -.002 -.003  BK4
BK79 BK84

Stainless and heat- P25M

150 400 .001 .002 .002 .003 .004 .002 .002 .002


resistant steels
-270 -600 -.003 -.004 -.005 -.006 -.008 -.003 -.004 -.005   P40
Cr; CrNi u. CrNiMo-alloys
Toughness

Hardened steels
over 65 _ .001 .002 .002 .002 .001 .001 .002


480 -200 -.002 -.003 -.004 -.004 -.002 -.002 -.003  

Cast steel
up to 500 .001 .002 .002 .003 .004 .002 .002 .002
  170 350 500 650 800 950 1150

Wear resistance

200 -825 -.003 -.004 -.005 -.006 -.008 -.003 -.004 -.005 Cutting speed vc = ft/min
Cast iron
180 330 .002 .004 .004 .005 .006 .003 .003 .004

Cast iron materials
-250 -660 -.004 -.006 -.006 -.008 -.010 -.005 -.006 -.006 
BK62 / BK1
High strength cast
over 330 .002 .002 .003 .003 .004 .002 .002 .002

K10
iron/ alloy cast iron 
250 -500 -.003 -.004 -.005 -.006 -.008 -.003 -.004 -.006
Toughness

Aluminium alloys  
up to 825 .001 .001 .002 .002 .003 .001 .002 .002
80 -1480 -.002 -.003 -.004 -.005 -.006 -.002 -.003 -.004 170 350 500 650 800 950 1150
Cutting speed vc = ft/min
80 660 .001 .002 .002 .003 .004 .002 .002 .002 

-120 -990 -.002 -.004 -.005 -.006 -.006 -.003 -.004 -.005 
Wear resistance

Non-ferrous metals
over 500 .002 .002 .003 .004 .005 .002 .002 .003

 BK50
120 -825 -.004 -.004 -.005 -.006 -.008 -.003 -.004 -.006  
BK77
Brass, red brass up to 500 .002 .003 .003 .004 .004 .002 .002 .003
  
 K10
BK72
90 -825 -.003 -.005 -.006 -.008 -.010 -.003 -.004 -.005  BK
BK4
Magnesium alloys 660 .002 .003 .003 .004 .005 .002 .002 .003  
Toughness

-990 -.003 -.005 -.006 -.006 -.008 -.004 -.005 -.006

Nickel base and 65 _ .001 .001 .002 .002 .001 .001 .002 

cobalt base alloys -260 -.002 -.003 -.004 -.005 -.002 -.002 -.003  350 650 950 1300 1650 2000 2300
500 .002 .003 .004 .004 .005 .002 .003 .003

 Cutting speed vc = ft/min
Plastics solid
-990 -.004 -.005 -.006 -.006 -.008 -.005 -.005 -.006  
20
KUB QuatronTM

W83 ..01 W83 ..13

SOEX....-01 1st choice SOEX....-13  1st choice

 Alternative Alternative

Material Hardness Cutting Feed fn [mm] Insert The feed values given in the diagrams refer to
speed Boring depth 2 x 쏗
vc ⭋ .55- ⭋ .69-  1st choice
the overall diameter range. See table for feeds
[HB] [ft/min] < .69 in 1.02 in & Alternative for different diameters.
Mild steel up to 150 750-1000 .002 - .004 .002 - .004
Free cutting steel up to 150 650-900 .002 - .006 .003 - .007
Mild case-hardened 150-220 600-800 .002 - .006 .003 - .006 Steel materials

Feed fn [mm]
and heat-treated steels .012
Heat treated steels 200-260 450-650 .002 - .006 .003 - .007
alloyed Cr and CrMo .008
BK 79

Tool and heat-tr eated

heat-treated < 250 450-650 .002 - .005 .002 - .007
.004 BK 84
steels 360-560 300-500 .001 - .003 .002 - .004 BK 69
Stainless and heat- 400-600 .002 - .004 .002 - .005
resistant steels
Cr; CrNi and CrNiMo-alloys 170 350 500 650 800 950 1150
Cutting speed vc [ft/min]
Hardened steels over 480 60-200 .001 - .003 .002 - .004
Stainless and acid-resistant materials
Feed fn [mm]
Cast steel up to 200 500-800 .002 - .005 .002 - .006 .012
Cast iron 180-250 300-650 .004 - .007 .004 - .010
High strengh cast over 250 300-500 .002 - .006 .003 - .008
iron / alloy cast iron .008
BK 79

Aluminium alloys up to 80 800-1500 .001 - .003 .002 - .004 .004

BK 84
80-120 650-1000 .002 - .005 .002 - .006 BK 74

over 120 500-800 .002 - .006 .003 - .008

Brass, red brass up to 90 500-800 .003 - .005 .003 - .006 170 350 500 650 800 950 1150
Magnesium alloys 650-1000 .003 - .005 .003 - .006 Cutting speed vc [ft/min]
Nickel base and 60-250 .001 - .002 .001 - .003 Cast iron materials
Feed fn [mm]

cobalt base alloys .012

Plastic solid 500-1000 .003 - .005 .004 - .006 BK 84
Table of grades - ISO application gr oups
groups .008
P K
Steel, cast steel, stainless steel Cast iron materials .004
BK 1
P01 P10 P20 P30 P40 P50 K01 K10 K20 K30

BK84 BK1
170 350 500 650 800 950 1150
BK79 Cutting speed vc [ft/min]

BK74 Materials difficult to cut

Feed fn [mm]

.012

BK69
.008
Wear resistance Wear resistance
Toughness Toughness
.004
Note: The application details shown depend on the environmental and BK 84
application conditions (e.g. machine, ambient temperature, use of lubricant/
coolant and the machining result required). These are subject to correct 170 350 500 650 800 950 1150
operating conditions, correct application and compliance with the spindle speed Cutting speed vc [ft/min]
limits given for the tools.
21
 Cutting recommendations
Note:
The application details shown depend on the environmental and application
conditions (e.g. machine, ambient temperature, use of lubricant/coolant and the
Finishing machining result required). These are subject to correct operating conditions,
correct application and compliance with the spindle speed limits given for the tools.

W30... W60... W30.....32 W30.....31 W78... W79... W57... W30... W60... chipbreaker material allocation

Aluminum

Mild steel
neutral neutral Case
6° 6°
12°
6°
12° 12° 14°
hardened
12° 12° 12°
20° 20°
steels
Cutting depth Cutting depth Cutting depth Cutting depth Cutting depth Cutting depth Cutting depth Cutting depth Cutting depth hardened
ap (in) ap (in) ap (in) ap (in) ap (in) ap (in) ap (in) ap (in) ap (in) steels and neutral 6° 12° 20°
.008 - .020 .008 - .012 .002- .010 .008- .020 .004 - .012 .004 - .012 .001- .010 .004 - .012 .004 - .012 cast iron chipbreaker


     

Material Hardness Cutting Feed Cutter geometry

Wear resistance
speed Mild steel / tool steel CK38
(H.B) vc (ft/min) fz (in/rev) over 45 HRC CK32 / CK30
Mild steel .002 - .004
  CBN40 CK37
up to 150 330-1300 .004 - .006

K10 BK
.006 - .012 
BK4
Free cutting steel .002 - .004
 
up to 150 330-1300 .004 - .006
 BK84
.006 - .012  P25M
Toughness

Mild and heat steel .002 - .004
  P40

alloyed Cr and CrMo 150 - 220 260-990 .004 - .006
 P35
steels .006 - .012 
Mild case-hardened .002 - .004
 
and heat-treated 200 - 260 260-990 .004 - .006
 170 350 500 600 800 950 1150 1300 1450 1650
steels .006 - .012  Cutting speed vc = ft/min
Tool and heat- .002 - .004
 


Wear resistance

treated steels < 250 260-825 .004 - .006 Stainless steel CK38
.006 - .012 
CK32 / CK30
.002 - .004
 
CK37
360-560 200-660 .004 - .006

.006 - .012  BK

Stainless and heat- .002 - .004
  BK4

resistant steels 150-270 200-825 .004 - .006
 BK84

Cr; CrNi, CrNiMo-alloys .006 - .012  P25M
Toughness

Hardened steels .002 - .004
 P40

over 480 65-330
.004 - .006
 P35

Cast steel .002 - .004
 

up to 200 260-990 .004 - .006
  170 350 500 600 800 950 1150 1300 1450 1650
.006 - .012
Cutting speed vc = ft/min
Cast iron .002 - .004

180 - 250 80-1150 .004 - .006
  Cast iron materials
resistance

CBN57
.006 - .012
 
Wear

CK38
High strength cast .002 - .004

iron/ alloy cast iron over 250 160-660 .004 - .006
  CK32 / CK30
.006 - .012
  CK37

Aluminium alloys .002 - .004
  BK1

up to 80 660-3950 .004 - .006
 
Toughness

K10
.006 - .012
 
.002 - .004
 
80 - 120 500-2600 .004 - .006
 
.006 - .012
  170 350 500 600 800 950 1150 1300 1450 1650
.002 - .004
  Cutting speed vc = ft/min
over 120 330-1650 .004 - .006
 
resistance

 
Wear

.006 - .012 Non-ferrous metals

Brass, red brass .002 - .004
 
PKD
up to 90 500-1300 .004 - .006
  BK
.006 - .012
  K10

Magnesium alloys .002 - .004
 BK4

Toughness

660-2600 .004 - .006


.006 - .012

Plastics soft, solid .002 - .004
350 650 950 1300 1650 2000 2300 2600 3000 3300
Vulcanite hard 500-1320 .004 - .006
Cutting speed vc = ft/min
rubber .006 - .012

22
 Note:
The application details shown depend on the environmental and application
conditions (e.g. machine, ambient temperature, use of lubricant/coolant and the
Rough TTur
urning
urning machining result required). These are subject to correct operating conditions,
correct application and compliance with the spindle speed limits given for the tools.

W00 / W01 W60... W28 ..00 W79..06 W28 ..01 W28 ..02 W28 ..03 W29 ..11 W29 ..13 Insert size
W29 ..00 W29 ..01 W29 ..02 W29 ..03 W..10 (K05) - 50%
W..17 (K04) - 30% Reducing
W..24 (K02) - 15%
W..34 (K01) Basis for feed values
W..42 (K1) + 15%
W..50 (K2) + 30% Increasing
neutral neutral W..58 (K3) + 50%
6° 6°
12° 12°
20° 20° Please note: The feed values given in
Chipbreaker Chipbreaker Cutting edge Cutting edge Cutting edge Cutting edge Cutting edge Cutting edge Cutting edge the table relate to the use of a tool with a
6° 12° 20° 6° 12° 20° honed molded honed land honed land honed honed honed W.. 34 (K01) insert. If tools are used with
smaller or larger inserts, the feed rate
should be reduced or increased as shown

 
        in the table alongside.
Material Hardness Cutting Feed Cutter geometry

Wear resistance
speed Mild steel / tool steel
(H.B) vc (ft/min) fz (in/rev) BK72 / BK
Mild steel .004 - .008
 
up to 150 330-990 .008 - .012
  
BK3
.012 - .016
 
BK4
Free cutting steel .004 - .008
 
BK84
up to 150 330-990 .008 - .012
  BK79
P25M
.012 - .016
 

Toughness
Mild and heat steel .004 - .008
  P40
alloyed Cr and CrMo 150 - 220 260-825 .008 - .012
 
steels .012 - .016

Mild case-hardened .004 - .008
 
and heat-treated 200 - 260 260-825 .008 - .012
  170 350 500 650 800 950 1150 1300 1450
steels .012 - .016  Cutting speed vc = ft/min
Tool and heat- .004 - .008
 

 
Wear resistance

treated steels < 250 260-660 .008 - .012 Stainless steel

.012 - .016 
BK 72/ BK
.004 - .008
 
360-560 60-600 .008 - .012
  BK74
.012 - .016  BK4
Stainless and heat- .004 - .008
   BK79
BK84

resistant steels 150-270 200-660 .008 - .012
  P25M

Cr; CrNi, CrNiMo-alloys .012 - .016 
P40
Toughness

Hardened steels
over 480 65-330 .004 - .008

Cast steel .004 - .008
  

up to 200 260-825 .008 - .012
   170 350 500 650 800 950 1150 1300 1450
.012 - .016

Cutting speed vc = ft/min
Cast iron .004 - .008

180 - 250 260-990 .008 - .012 Cast iron materials
resistance

.012 - .016
Wear

High strength cast .004 - .008

iron/ alloy cast iron over 250 160-600 .008 - .012 BK62 / BK1
.012 - .016
K10
Aluminium alloys .004 - .008
 
up to 80 660-3300 .008 - .012
 
Toughness

.012 - .016
 

.004 - .008
 
80 - 120 500-1900 .008 - .012
 
.012 - .016
 170 350 500 650 800 950 1150 1300 1450
.004 - .008
   Cutting speed vc = ft/min
over 120 330-1300 .008 - .012
 
resistance

Wear

.012 - .016 Non-ferrous metals

Brass, red brass .004 - .008
  PKD55 / BK50
up to 90 500-990 .008 - .012
 
.012 - .016
 K10
BK 72/ BK

Magnesium alloys .004 - .008
   BK77

Toughness

660-1900 .008 - .012
   BK4

.012 - .016

Plastics soft, solid .004 - .008  350 650 950 1300 1650 2000 2300 2600 3000
500-990 .008 - .012  Cutting speed vc = ft/min
.012 - .016 
23
 Numerical Coding for Inserts

Inserts W ...
Code Secondary group number Type of chip control / rake
Insert geometry Code Code
precision ground molded
00 Unisix 00, standard ground top rake and 00 neutral 00 Double chip rake(PD),
01 Unisix 01, strengthened periphery L.H. honed cutting edge

L.H. cutting
04 Unisix 04, 6-edged ground top rake and 01 Double chip rake(K),
05 Unisix 05, 6-edged, 06 6° L.H.
periphery honed land cutting edge
wide chips slots 12 12° L.H.
15 15° L.H. Step geometry (KS),
24 Unisix 24, strengthened molded top rake and 18 02
18° L.H. honed land cutting edge
25 Unisix 25, standard periphery 20 20° L.H.
27 Unisix 27, strengthened molded top rake and 03 Dimple geometry (KX),
periphery 30 neutral honed cutting edge
28 Unisix 28, standard molded top rake and R.H.

R.H. cutting
29 Unisix 29, strengthened periphery 04 14° continuous rake
36 6° R.H. (CERKOMET)
30 U, 42 12° R.H.
ground top rake and 45 15° R.H. 05 10° continuous rake (T)
32 TPH.,
periphery 48 18° R.H. honed cutting edge
34 T
50 20° R.H.
36 U, ground top rake and 06 12° continuous rake (C)
6-edged periphery 60 neutral honed cutting edge
3⫻ ground or
37 TEH. ground top rake and
neutral
07 Finished geometry
66 6°
periphery
70 10°
57 U, molded top rake and 72 12° 10 Wave geometry,
58 TP.., periphery 80 20° honed landcutting edge
59 T 82 12° L.H.
83 12° R.H. 11 20° continuous rake,
60 C ground top rake and sharp-edged honed cutting edge
periphery
Tipped, complete
78 Copying insert molded top rake and 94 NL/NR 12 Alu-/Finished geometry
neutral

35° periphery
98 Tipped on corner
79 C molded top rake and 13 Wave geometry,
99 Tipped on corner honed cutting edge
periphery NL/NR

W 6 0 3 2 0 6 0 䊉
0 8 6 0
W 2 9 2 4 0 1 0 䊉
0 4 0 3
Code Prime category Code inscribed circle Modif- Code Geometry of the insert nose Code Carbide
number for d1 d1 d1 d1 ication grade
inch (mm) in (mm)
03 0.156 (3.97) 䊉 01 r ⫽ 0.004 (0.1) 01 P 10
W Standard inserts 0 03 P 25 M
04 0.157 (4.00) 䊉 䊉 02 r ⫽ 0.008 (0.2) 04 P 40
10 0.197 (5.00) 䊉 03 r ⫽ 0.012 (0.3) 12 P 25
1 04 r ⫽ 0.016 (0.4)
12 0.217 (5.50) 䊉 14 P 35
13 0.219 (5.56) 䊉 05 r ⫽ 0.020 (0.5) 21 K 10
2 r ⫽ 0.024 (0.6) R 30 CK 30
06
14 0.220 (5.60) 䊉 32 CK 32
08 r ⫽ 0.031 (0.8) U 8.00
17 0.236 (6.00) 䊉 3 12 r ⫽ 0.047 (1.2)
37 CK 37
18 0.250 (6.35) 䊉 䊉 䊉 38 CK 38
40 CBN
20 0.276 (7.00) 䊉 4 30 U 8.00 R0 50 BK 50
22 0.303 (7.70) 䊉 31 UF UF US 55 PKD
23 0.313 (7.94) 䊉 5 32 US 57 CBN
60 BK
24 0.315 (8.00) 䊉 61 BK 1
26 0.323 (8.20) 䊉 6 33 U 8.77 15° clearance angle 62 BK 62
32 0.375 (9.52) 䊉 䊉 34 F and KUF 90° Cutting edge form for 63 BK 3
34 0.394 (10.00) 䊉 7 35 F and KUF 75° Unisix milling cutter 64 BK 4
36 F and KUF 60° inserts 66 BK 66
42 0.472 (12.00) 䊉
39 r ⫽ 0.002 (0.05) 72 BK 72
44 0.500 (12.70) 䊉 8
45° corner for champfer cartridge 74 BK 74
40
50 0.591 (15.00) 䊉 75 Support chamfer 75° L.H.
77 BK 77
9 79 BK 79
58 0.693 (17.60) 䊉 90 Support chamfer 90° L.H. 84 BK 84
24
Inserts Q ...
Code Secondary group number
Insert geometry
ISO basic forms

09 S ... square

12 T ... triangular

15 C ... rhomboid 80°

21 E ... rhomboid 75°

36 A ... rhomboid form

Q 0 9 1 8 0 0 0 䊉
1 7 0 4
Q 2 1 4 4 0 0 0 䊉
0 1 6 4
Code Prime category Code inscribed d1 d1 d1 d1 d1 Serial number Modi- Serial number Code Carbide
number for circle d1 fication grade
in (mm)

Q Standard insert 00 0 00 03 P 25 M
13 0.219 䊉
(5.56) 01 01 04 P 40
1
18 0.250 䊉 䊉 䊉 䊉 02 02 21 K 10
(6.35) 2 22 K 20
03 03
24 0.315 䊉 䊉 3 37 CK 37
04 04
(8.00) 44 SK 44
05 4 05
32 0.375 䊉 䊉 䊉 64 BK 4
(9.52) 06 5 06
68 BK 68
38 0.437 䊉 07
6
07
78 BK 78
(11.10)
08 08 80 BK 80
7
44 0.500 䊉 䊉 䊉 䊉 09 09
(12.70) 85 BK 85
8
: : 87 BK 87
53 0.625 䊉
(15.88) 99 9 99 89 BK 89
25
 Unisix® Inserts

W 00 (WOHX)
Inserts W 00 l
␥
(WOHX regular) L.H. cutting form f
r 8°
L.H. cutting form with positive ground
24°
chipbreaker. d1

Important note!
The cutting edge on Cermet inserts is
honed. 84° s

ISO Description Order No. Carbide grades Cermet Dimensions

CVD
uncoated coated uncoated

P25M P40 K10 BK BK4 CK32 CK37

Cutting edge design d1 s l ␥ f r
E = honed E E E F E E E E
F = sharp
왔 enter carbide code 왔 03 04 21 60 64 32 37
WOHX 02T001 ..L-G12 W00 04120.01.. % % % .157 .047 .102 12° .087 .004

WOHX 03T102 ..L-G12 W00 10120.02.. % % % .197 .079 .130 12° .108 .008

WOHX 040202 ..L-G12 W00 17120.02.. % % % % .236 .098 .157 12° .130 .008

WOHX 050302 ..L-G06 W00 24060.02.. % # % % % .315 .118 .209 6° .174 .008
WOHX 050304 ..L-G06 W00 24060.04.. # .315 .118 .209 6° .173 .016
WOHX 050302 ..L-G12 W00 24120.02.. % % % % # .315 .118 .209 12° .174 .008
WOHX 050304 ..L-G12 W00 24120.04.. % % % % % % .315 .118 .209 12° .173 .016
WOHX 050302 ..L-G20 W00 24200.02.. # % # .315 .118 .209 20° .174 .008

WOHX 060302 ..L-G06 W00 34060.02.. % % % % % .394 .118 .260 6° .218 .008
WOHX 060304 ..L-G06 W00 34060.04.. % # % % # .394 .118 .260 6° .217 .016
WOHX 060302 ..L-G12 W00 34120.02.. % % % % % % # .394 .118 .260 12° .218 .008
WOHX 060304 ..L-G12 W00 34120.04.. % # # % % % # .394 .118 .260 12° .217 .016
WOHX 060302 ..L-G20 W00 34200.02.. % % % % .394 .118 .260 20° .218 .008
WOHX 060304 ..L-G20 W00 34200.04.. # % .394 .118 .260 20° .217 .016

WOHX 08T302 ..L-G06 W00 42060.02.. % % % % % .472 .150 .311 6° .261 .008
WOHX 08T304 ..L-G06 W00 42060.04.. % # % % % .472 .150 .311 6° .261 .016
WOHX 08T302 ..L-G12 W00 42120.02.. % % % % % # # .472 .150 .311 12° .261 .008
WOHX 08T304 ..L-G12 W00 42120.04.. % # % % # % % .472 .150 .311 12° .261 .016
WOHX 08T302 ..L-G20 W00 42200.02.. % % .472 .150 .311 20° .261 .008
WOHX 08T304 ..L-G20 W00 42200.04.. # % .472 .150 .311 20° .261 .016

WOHX 10T302 ..L-G06 W00 50060.02.. # .591 .169 .390 6° .327 .008
WOHX 10T304 ..L-G06 W00 50060.04.. % % % % % .591 .169 .390 6° .326 .016
WOHX 10T302 ..L-G12 W00 50120.02.. % # # .591 .169 .390 12° .327 .008
WOHX 10T304 ..L-G12 W00 50120.04.. % % % % % .591 .169 .390 12° .326 .016
WOHX 10T304 ..L-G20 W00 50200.04.. % % .591 .169 .390 20° .326 .016
WOHX 120406 ..L-G06 W00 58060.06.. % % % % .693 .197 .457 6° .382 .024
WOHX 120406 ..L-G12 W00 58120.06.. % % % # .693 .197 .457 12° .382 .024
Cast iron, graphite cast iron Order example:
Non-ferrous metals % Availability: for delivery see Description WOHX 120406 EL-G06
Stainless steel current price and stock list Carbide grade K 10
Mild steel / tool steel # To be discontinued Order No.: W00 58060.0621
26
W 00 (WOHX)
Inserts W 00 l
␥
(WOHX regular) R.H. cutting form f
8° r
R.H. cutting form with positive ground
24°
chipbreaker. d1

Important note!
The cutting edge on Cermet inserts is
honed. s 84°

ISO Description Order No. Carbide grades Cermet Dimensions

CVD
uncoated coated uncoated

P25M P40 K10 BK BK4 CK32 CK37

Cutting edge design d1 s l ␥ f r
E = honed E E E F E E E E
F = sharp
왔 enter carbide code 왔 03 04 21 60 64 32 37
WOHX 02T001 ..R-G12 W00 04420.01.. % % .157 .047 .102 12° .087 .004

WOHX 03T102 ..R-G12 W00 10420.02.. % % .197 .079 .130 12° .108 .008

WOHX 040202 ..R-G12 W00 17420.02.. % % .236 .098 .157 12° .130 .008

WOHX 050302 ..R-G06 W00 24360.02.. % % % .315 .118 .209 6° .174 .008
WOHX 050304 ..R-G06 W00 24360.04.. % % .315 .118 .209 6° .173 .016
WOHX 050302 ..R-G12 W00 24420.02.. % % % % % # .315 .118 .209 12° .174 .008
WOHX 050304 ..R-G12 W00 24420.04.. % % # .315 .118 .209 12° .173 .016
WOHX 050302 ..R-G20 W00 24500.02.. % .315 .118 .209 20° .174 .008

WOHX 060302 ..R-G06 W00 34360.02.. % % % % % .394 .118 .260 6° .218 .008
WOHX 060304 ..R-G06 W00 34360.04.. % % % % .394 .118 .260 6° .217 .016
WOHX 060302 ..R-G12 W00 34420.02.. % # % % % # # .394 .118 .260 12° .218 .008
WOHX 060304 ..R-G12 W00 34420.04.. % % % % % % # .394 .118 .260 12° .217 .016
WOHX 060308 ..R-G12 W00 34420.08.. % .394 .118 .260 12° .217 .031
WOHX 060302 ..R-G20 W00 34500.02.. % % % .394 .118 .260 20° .218 .008
WOHX 060304 ..R-G20 W00 34500.04.. # % % .394 .118 .260 20° .217 .016
WOHX 08T302 ..R-G06 W00 42360.02.. % % % % % .472 .150 .311 6° .261 .008
WOHX 08T304 ..R-G06 W00 42360.04.. % # % % .472 .150 .311 6° .261 .016
WOHX 08T308 ..R-G06 W00 42360.08.. % .472 .150 .311 6° .261 .031
WOHX 08T302 ..R-G12 W00 42420.02.. % % % % % .472 .150 .311 12° .261 .008
WOHX 08T304 ..R-G12 W00 42420.04.. % # % % % .472 .150 .311 12° .261 .016
WOHX 08T302 ..R-G20 W00 42500.02.. % % % .472 .150 .311 20° .261 .008
WOHX 08T304 ..R-G20 W00 42500.04.. # # # .472 .150 .311 20° .261 .016
WOHX 10T302 ..R-G06 W00 50360.02.. # % .591 .169 .390 6° .327 .008
WOHX 10T304 ..R-G06 W00 50360.04.. % % % .591 .169 .390 6° .326 .016
WOHX 10T304 ..R-G12 W00 50420.04.. % % % % % .591 .169 .390 12° .327 .008
WOHX 10T304 ..R-G20 W00 50500.04.. % % # .591 .169 .390 20° .326 .016
WOHX 120406 ..R-G06 W00 58360.06.. % # % .693 .197 .457 6° .382 .024
WOHX 120406 ..R-G12 W00 58420.06.. % % # # .693 .197 .457 12° .382 .024

Cast iron, graphite cast iron Order example:

Non-ferrous metals % Availability: for delivery see Description WOHX 060304 ER-G06
Stainless steel current price and stock list Carbide grade K 10
Mild steel / tool steel # To be discontinued Order No.: W00 34360.0421
27
 Unisix® Inserts

W 00 (WOHX)
Inserts W 00 l
(WOHX regular) Neutral cutting form f
r 8°

24°
d1

84° s

ISO Description Order No. Carbide grades Dimensions

CVD
uncoated coated

K10 BK1 d1 s l f r

enter carbide code 왔 21 61

WOHX 060302 EN W00 34600.02.. % .394 .118 .260 .218 .008
WOHX 060304 EN W00 34600.04.. % % .394 .118 .260 .217 .016
WOHX 060308 EN W00 34600.08.. # % .394 .118 .260 .215 .031

WOHX 08T304 EN W00 42600.04.. % % .472 .150 .311 .261 .016

WOHX 08T308 EN W00 42600.08.. # % .472 .150 .311 .259 .031

WOHX 10T304 EN W00 50600.04.. % .591 .169 .390 .326 .016

l
Inserts W 00 (WOGX) f
(UNISIX P regular) with PCD-and CBN- r 8°
cutting edges
24°
d1

84°
s

ISO Description Order No. Cutting material Dimensions

Cutting edge design PCD CBN

d1 s l f r
FN = Sharp FN TN
TN = Honed
왔
enter carbide code 왔 55 57
WOGX 060304 .. W00 34990.04.. % % .394 .118 .118 .216 .016
WOGX 060308 .. W00 34990.08.. % .394 .118 .118 .215 .031

Cast iron, graphite cast iron Order example:

Non-ferrous metals % Availability: for delivery see Description WOGX 08T308 EN
Stainless steel current price and stock list Carbide grade K 10
Mild steel / tool steel # To be discontinued Order No.: W00 42600.0821
28
W 01 (WOHX)
Inserts W 01 l
(WOHX heavy duty) L.H. cutting form ␥
f
r 8°
L.H. cutting form with positive ground
24°
chipbreaker.
d1

84° s

ISO Description Order No. Carbide grades Dimensions

CVD PVD
uncoated coated coated

P25M K10 BK BK4 BK84

Cutting edge design d1 s l ␥ f r
E = honed E E F E E E
F = sharp
왔 enter carbide code 왔 03 21 60 64 84
WOHX 05T302 ..L-G06 W01 24060.02.. % % % % .315 .150 .209 6° .174 .008
WOHX 05T302 ..L-G12 W01 24120.02.. % % % % .315 .150 .209 12° .174 .008
WOHX 05T304 ..L-G12 W01 24120.04.. % % % % % .315 .150 .209 12° .173 .016

WOHX 06T302 ..L-G06 W01 34060.02.. % % % % % .394 .150 .260 6° .218 .008
WOHX 06T302 ..L-G12 W01 34120.02.. % % % .394 .150 .260 12° .218 .008
WOHX 06T304 ..L-G12 W01 34120.04.. % % % % % .394 .150 .260 12° .217 .016

WOHX 080402 ..L-G06 W01 42060.02.. % % % .472 .189 .311 6° .261 .008
WOHX 080404 ..L-G06 W01 42060.04.. % % .472 .189 .311 6° .261 .016
WOHX 080404 ..L-G12 W01 42120.04.. % % % .472 .189 .311 12° .261 .016

WOHX 100504 ..L-G06 W01 50060.04.. % % % % .591 .209 .390 6° .326 .016
WOHX 100504 ..L-G12 W01 50120.04.. % % % .591 .209 .390 12° .326 .016

WOHX 120606 ..L-G06 W01 58060.06.. % % .693 .236 .457 6° .382 .024
WOHX 120606 ..L-G12 W01 58120.06.. % % .693 .236 .457 12° .382 .024

Cast iron, graphite cast iron Order example:

Non-ferrous metals % Availability: for delivery see Description WOHX 06T304 EL-G12
Stainless steel current price and stock list Carbide grade BK 84
Mild steel / tool steel # To be discontinued Order No.: W01 34120.0484
29
 Unisix® Inserts

W 01 (WOHX)
l
Inserts W 01
␥
(WOHX heavy duty) R.H. cutting form f
8° r
R.H. cutting form with positive ground
24°
chipbreaker.
d1

s 84°

ISO Description Order No. Carbide grades Dimensions

CVD PVD
uncoated coated coated

P25M K10 BK BK4 BK84

Cutting edge design d1 s l ␥ f r
E = honed E E F E E E
F = sharp 03
왔
enter carbide code 왔 21 60 64 84
WOHX 05T302 ..R-G12 W01 24420.02.. % % % % .315 .150 .209 12° .174 .008
WOHX 05T304 ..R-G12 W01 24420.04.. % % .315 .150 .209 12° .173 .016

WOHX 06T302 ..R-G12 W01 34420.02.. % % .394 .150 .260 12° .218 .008
WOHX 06T304 ..R-G12 W01 34420.04.. % % % .394 .150 .260 12° .217 .016

WOHX 080402 ..R-G06 W01 42360.02.. % .472 .189 .311 6° .261 .008
WOHX 080402 ..R-G12 W01 42420.02.. % % % % .472 .189 .311 12° .261 .008
WOHX 080404 ..R-G12 W01 42420.04.. % % .472 .189 .311 12° .261 .016
%
WOHX 100504 ..R-G06 W01 50360.04.. % .591 .209 .390 6° .326 .016
WOHX 100504 ..R-G12 W01 50420.04.. % # % .591 .209 .390 12° .326 .016

Cast iron, graphite cast iron Order example:

Non-ferrous metals % Availability: for delivery see Description WOHX 080402 FR-G12
Stainless steel current price and stock list Carbide grade K 10
Mild steel / tool steel # To be discontinued Order No.: W01 42420.0221
30
W 01 (WOHX)
Inserts W 01 l
(WOHX heavy duty) Neutral cutting form f
r 8°

24°
d1

84° s

ISO Description Order No. Carbide grades Dimensions

CVD
uncoated coated

enter carbide K10 BK1 d1 s l f r

grade

왔
21 61
WOHX 05T304 EN W01 24600.04.. % % .315 .150 .209 .173 .016
WOHX 08T308 EN W01 24600.08.. % .315 .150 .209 .171 .031

WOHX 06T304 EN W01 34600.04.. % % .394 .150 .260 .217 .016

WOHX 06T308 EN W01 34600.08.. % .394 .150 .260 .215 .031

WOHX 080404 EN W01 42600.04.. # % .472 .189 .311 .261 .016

WOHX 080408 EN W01 42600.08.. % .472 .189 .311 .259 .031

WOHX 100504 EN W01 50600.04.. # .591 .209 .390 .326 .016

WOHX 100508 EN W01 50600.08.. % .591 .209 .390 .324 .031

WOHX 120606 EN W01 58600.06.. % .693 .236 .457 .382 .024

Order example: Description WOHX 05T304 EN, Carbide grade K 10, Order No.: W01 24600.0421

Inserts W 01
(WOHX heavy duty) 6° s
s 6°

8°
8°

d1 d1
a a
Approach angle 90° Approach angle 75°
for corner milling cutter F 020 f f for face milling cutter F 020

ISO Description Order No. Carbide grade Dimensions

CVD
uncoated coated

enter carbide P25M K10 BK4 d1 s ␥ f a

grade

왔
03 21 64
WOHX 06T3PA ER-G06 W01 34360.34.. % % % .394 .150 6° .055 .236
WOHX 06T3EA ER-G06 W01 34360.35.. % .394 .150 6° .055 .232
WOHX 0804PA ER-G06 W01 42360.34.. % % .472 .189 6° .055 .276
Cast iron, graphite cast iron Order example:
Non-ferrous metals % Availability: for delivery see Description WOHX 06T3PA ER-G06
Stainless steel current price and stock list Carbide grade K 10
Mild steel / tool steel # To be discontinued Order No.: W01 34360.3421
31
 Unisix® Inserts

W 01 (WOGX)
Inserts W 01 l
(WOGX heavy duty) f
r 8°
24°
d1

84° s

ISO Description Order No. Cutting material Dimensions

PCD tipped CBN tipped

Cutting edge design d1 s l f r
F = sharp F S
S = honed + land
왔 enter carbide code 왔 55 57
WOGX 05T304 .. W01 24940.04.. % % .315 .150 .398 .173 .016
WOGX 06T304 .. W01 34940.04.. % % .394 .150 .500 .217 .016
WOGX 080404 .. W01 42940.04.. % % .472 .189 .602 .261 .016

Or der example: Descripton WOGX 05T304 F, Cutting material PCD, Order No.: W01 34940.0455
Order

Cast iron, graphite cast iron

Non-ferrous metals % Availability: for delivery see
Stainless steel current price and stock list
Mild steel / tool steel # To be discontinued
32
W 01 (WOHX)
Inserts W 01 s
(WOHX heavy duty)
L.H. cutting form 8°
For clockwise-rotating tools
Approach angle 90°
d1
a f 90°
r

ISO Description Order No. Carbide grades Dimensions

CVD
coated

enter carbide BK1 d1 s a f r

grade

왔
61
WOHX 05T3PN EL W01 24600.90.. % .315 .150 .201 .167 .031
WOHX 06T3PN EL W01 34600.90.. % .394 .150 .252 .210 .031
WOHX 0804PN EL W01 42600.90.. % .472 .189 .303 .254 .031
WOHX 1005PN EL W01 50600.90.. % .591 .209 .382 .320 .031

Order example: Descripton WOHX 05T3PN EL, Carbide grade BK1, Order No.: W01 24600.9061

Inserts W 01 s
(WOHX heavy duty)
L.H. cutting form
8°
For clockwise-rotating tools
Approach angle 75°
d1
f a 75°
r

ISO Description Order No. Carbide grades Dimensions

CVD
coated

enter carbide BK1 d1 s a f r

grade

왔
61
WOHX 05T3EN EL W01 24600.75.. % .315 .150 .173 .182 .031
WOHX 06T3EN EL W01 34600.75.. % .394 .150 .224 .235 .031
WOHX 0804EN EL W01 42600.75.. % .472 .189 .272 .287 .031
WOHX 1005EN EL W01 50600.75.. % .591 .209 .350 .366 .031

Cast iron, graphite cast iron Order example:

Non-ferrous metals % Availability: for delivery see Descripton WOHX 05T3EN EL
Stainless steel current price and stock list Carbide grade BK1
Mild steel / tool steel # To be discontinued Order No.: W01 24600.7561
33
 Unisix® Inserts

W 02 / W 04 (P-6 Cutting edges)

l l
Inserts W 02 ␥ ␥
f f
(UNISIX P 800 regular style) r r
8° 8°
24° 24°
d1 d1

Narrow Narrow
chip 84° s s 84° chip
groove groove
Right hand positive, fully ground. Left hand positive, fully ground.
ISO Description Order No. Carbide grades Dimensions
CVD
uncoated coated

K10 BK
Cutting edge design d1 s l f r
F = Sharp F E
E = Honed
왔
enter carbide code 왔 21 60
WOHX 060300 ..R-S12 W02 34420.00.. % % .303 .098 .197 .168 .004
WOHX 060302 ..R-S12 W02 34420.02.. % % .394 .138 .256 .218 .008
WOHX 060300 ..L-S12 W02 34120.00.. % % .472 .177 .295 .261 .008
WOHX 060302 ..L-S12 W02 34120.02.. % % .591 .197 .374 .326 .016

Inserts W 04 l
␥
(WNHX P6 Cutting edges) f
r
L.H. cutting form with positive
24°
ground chipbreaker.
d1

84° s

ISO Description Order No. Carbide grades Dimensions

CVD
uncoated coated

P10 P25 P40 K10 BK

Cutting edge design d1 s l ␥ f r
E = honed E E E F E
F = sharp
왔 enter carbide code 왔 01 12 04 21 60
WNHX 050201 ..L-G18 W04 22180.01.. % % % .303 .098 .197 18° .168 .004
WNHX 060302 ..L-G18 W04 34180.02.. % % % % % .394 .138 .256 18° .218 .008
WNHX 08T302 ..L-G18 W04 42180.02.. % % % % % .472 .177 .295 18° .261 .008
WNHX 08T304 ..L-G18 W04 42180.04.. % .472 .177 .295 18° .261 .016
WNHX 100404 ..L-G18 W04 50180.04.. % % % % % .591 .197 .374 18° .326 .016
WNHX 120606 ..L-G18 W04 58180.06.. % % % % .693 .236 .453 18° .382 .024

Order example: Descripton WNHX 08T302 EL-G18 / Carbide grade P 25 / Order No.: W04 42180.0212
Cast iron, graphite cast iron
Non-ferrous metals % Availability: for delivery see
Stainless steel current price and stock list
Mild steel / tool steel # To be discontinued
34
W 04 (WNHX)

Inserts W 04 l
␥
(WNHX P6 Cutting edges) f
R.H. cutting form r

24°
R.H. cutting form with positive d1
ground chipbreaker.

s 84°

ISO Description Order No. Carbide grades Dimensions

CVD
uncoated coated

P10 P25 P40 K10 BK

Cutting edge design d1 s l ␥ f r
E = honed E E E F E
F = sharp
왔 enter carbide code 왔 01 12 04 21 60
WNHX 050201 ..R-G18 W04 22480.01.. % % .303 .098 .197 18° .168 .004
WNHX 060302 ..R-G18 W04 34480.02.. % % % % % .394 .138 .256 18° .218 .008
WNHX 060304 ..R-G18 W04 34480.04.. % .394 .138 .256 18° .217 .016
WNHX 08T302 ..R-G18 W04 42480.02.. % % % % % .472 .177 .295 18° .261 .008
WNHX 08T304 ..R-G18 W04 42480.04.. % % % % % .472 .177 .295 18° .261 .016
WNHX 100404 ..R-G18 W04 50480.04.. % % % % % .591 .197 .374 18° .326 .016
WNHX 120606 ..R-G18 W04 58480.06.. % % % % .693 .236 .453 18° .382 .024

Order example: Descripton WNHX 050201 FR-G18 / Carbide grade K 10 / Order No.: W04 22480.0121

Inserts W 04 l
(WNHX P6 Cutting edges) f
Neutral cutting form r

24°
d1

84° s

ISO Description Order No. Carbide grades Dimensions

uncoated

enter carbide P25 K10 d1 s l f r

grade

왔
12 21
WNHX 060302 EN W04 34600.02.. % % .394 .138 .256 .218 .008
WNHX 08T302 EN W04 42600.02.. % % .472 .177 .295 .261 .008
WNHX 100404 EN W04 50600.04.. % % .591 .197 .374 .326 .016

Cast iron, graphite cast iron Order example:

Non-ferrous metals % Availability: for delivery see Descripton WNHX 050201 EN
Stainless steel current price and stock list Carbide grade K 10
Mild steel / tool steel # To be discontinued Order No.: W04 22600.0121
35
 Unisix® Inserts

W 27 .. 00 / W 27 .. 01
Inserts W 27 ..00... l 8°
8°
Positive molded chipbreaker with r
honed cutting edge.
d1

95°
s

Order No. Carbide grades Dimensions

CVD
uncoated coated

P40 K10 BK4 d1 s l r

enter carbide code
왔
04 21 64
W27 12000.04.. % % .217 .091 .134 .016
W27 20000.04.. % % % .276 .118 .170 .016

Order example: Carbide grade P 40 / Order No.: W27 12000.0404

Inserts W 27 ..01... l 8°
8°
Positive molded chipbreaker with r
honed cutting edge and land.
d1

95°
s

Order No. Carbide grades Dimensions

CVD PVD
uncoated coated coated

P25M P40 K10 BK BK1 BK4 BK69 BK79 BK84 d1 s l r

enter carbide code
왔
03 04 21 60 61 64 69 79 84
W27 12010.04.. % % % % % % % % % .217 .091 .134 .016
W27 20010.04.. % % % % % % % % % .276 .118 .170 .016

Cast iron, graphite cast iron

Non-ferrous metals % Availability: for delivery see Order example:
Stainless steel current price and stock list Carbide grade K 10
Mild steel / tool steel # To be discontinued Order No.: W27 20010.0421
36
W 27 .. 10
Inserts W 27 ..10... l
8°
Positive molded chipbreaker with r
honed cutting edge and land.
d1

95°
s

Order No. Carbide grades Dimensions

CVD PVD
uncoated coated coated

P40 K10 BK4 BK79 d1 s l r

enter carbide grade
왔
04 21 64 79
W27 12100.04.. % % % % .217 .091 .134 .016
W27 20100.04.. % % % .276 .118 .170 .016

Order example: Carbide grade BK 4 / Order No.: W27 12100.0464

Cast iron, graphite cast iron

Non-ferrous metals % Availability: for delivery see
Stainless steel current price and stock list
Mild steel / tool steel # To be discontinued
37
 Unisix® Inserts

W 29 .. 00 (WOEX)
Inserts W 29 ..00... l
␥
(WOEX heavy duty) f
r 8°
Positive molded chipbreaker with
24°
honed cutting edge. d1

84° s

ISO Description Order No. Carbide grades Cermet Dimensions

CVD PVD
uncoated coated coated uncoated

enter carbide P25M P40 K10 BK BK1 BK4 BK62 BK72 BK84 CK37 d1 s l ␥ f r
code

왔
03 04 21 60 61 64 62 72 84 37
WOEX 05T302-00 W29 24000.02.. # % .315 .150 .209 12° .173 .008
WOEX 05T304-00 W29 24000.04.. % % % % % % % % % % .315 .150 .209 12° .173 .016

WOEX 06T304-00 W29 34000.04.. % % % % % % % % % % .394 .150 .260 12° .217 .016
WOEX 06T308-00 W29 34000.08.. # # # % % .394 .150 .260 12° .215 .031

WOEX 080404-00 W29 42000.04.. % % % % % % % % % .472 .189 .311 12° .261 .016

WOEX 100504-00 W29 50000.04.. % % % % % % % % % .591 .209 .390 12° .326 .016
WOEX 100508-00 W29 50000.08.. # % % % .591 .209 .390 12° .324 .031

WOEX 120608-00 W29 58000.08.. % % % % % % % % .693 .236 .457 12° .381 .031

Cast iron, graphite cast iron Order example:

Non-ferrous metals % Availability: for delivery see Description WOEX 120608-00
Stainless steel current price and stock list Carbide grade K 10
Mild steel / tool steel # To be discontinued Order No.: W29 58000.0821
38
W 28 .. 00 (WOEX)
Inserts W 28 ..00... l
␥
(WOEX regular ) f
r 8°
Positive molded chipbreaker with
24°
honed cutting edge. d1

84° s

Description Order No. Carbide grades Dimensions

(ISO Description) CVD
uncoated coated

enter carbide P25M P40 K10 BK BK1 BK4 d1 s l ␥ f r

grade

왔
03 04 21 60 61 64
WOEX 03T102-00 W28 10000.02.. % % % % % .197 .079 .130 8° .108 .008

WOEX 040204-00 W28 17000.04.. % % % % % .236 .098 .157 8° .129 .016

WOEX 050302-00 W28 24000.02.. % % % % .315 .118 .209 12° .174 .008
WOEX 050304-00 W28 24000.04.. % % % % .315 .118 .209 12° .173 .016

WOEX 060302-00 W28 34000.02.. % % % % .394 .118 .260 12° .218 .008
WOEX 060304-00 W28 34000.04.. % % % % % % .394 .118 .260 12° .217 .016
WOEX 060308-00 W28 34000.08.. % .394 .118 .260 12° .215 .031

WOEX 08T302-00 W28 42000.02.. % % % .472 .150 .311 12° .261 .008
WOEX 08T304-00 W28 42000.04.. % % % % % .472 .150 .311 12° .261 .016
WOEX 08T308-00 W28 42000.08.. % .472 .150 .311 12° .259 .031

WOEX 10T304-00 W28 50000.04.. % % % % % .591 .169 .390 12° .326 .016
WOEX 10T308-00 W28 50000.08.. % % .591 .169 .390 12° .324 .031

WOEX 120408-00 W28 58000.08.. % % % .693 .197 .457 12° .381 .031

Cast iron, graphite cast iron Order example:

Non-ferrous metals % Availability: for delivery see Description WOEX 120408-00
Stainless steel current price and stock list Carbide grade P 40
Mild steel / tool steel # To be discontinued Order No.: W28 58000.0804
39
 Unisix® Inserts

W 29 .. 01 (WOEX)
Inserts W 29 ..01... l
␥
(WOEX heavy duty) f
r 8°
Positive molded chip groove with
24°
honed cutting edge and land. d1

84° s

ISO Description Order No. Carbide grades Dimensions

CVD PVD
uncoated coated coated

enter carbide P25M P40 K10 BK BK1 BK4 BK69 BK62 BK72 BK79 BK84 d1 s l ␥ f r
code

왔
03 04 21 60 61 64 69 62 72 79 84
WOEX 020102-01 W29 04010.02.. % % .157 .063 .102 12° .086 .008

WOEX 030204-01 W29 10010.04.. % % % % % % .197 .091 .126 8° .108 .016

WOEX 040304-01 W29 18010.04.. % % % % % % .250 .125 .161 8° .137 .016

WOEX 05T304-01 W29 24010.04.. % % % % % % % % % % % .315 .150 .209 12° .173 .016
WOEX 05T308-01 W29 24010.08.. % % % % % % % % % % % .315 .150 .209 12° .171 .031

WOEX 06T304-01 W29 34010.04.. % % % % % % % % % % % .394 .150 .260 12° .217 .016
WOEX 06T308-01 W29 34010.08.. % % % % % % % % % % % .394 .150 .260 12° .215 .031

WOEX 080404-01 W29 42010.04.. % % % % % % % % % % % .472 .189 .311 12° .261 .016
WOEX 080408-01 W29 42010.08.. % % % % % % % % % % % .472 .189 .311 12° .259 .031

WOEX 100504-01 W29 50010.04.. % % % % % % % % % % % .591 .209 .390 12° .326 .016
WOEX 100508-01 W29 50010.08.. % % % % % % % % % % % .591 .209 .390 12° .324 .031

WOEX 120608-01 W29 58010.08.. % % % % % % % % % % % .693 .236 .457 12° .381 .031

Cast iron, graphite cast iron Order example:

Non-ferrous metals % Availability: for delivery see Description WOEX 120608-01
Stainless steel current price and stock list Carbide grade P 40
Mild steel / tool steel # To be discontinued Order No.: W29 58010.0804
40
W 28 .. 01 (WOEX)
Inserts W 28 ..01... l
␥
(WOEX regular) f
r 8°
Positive molded chip groove with
24°
honed cutting edge and land. d1

84° s

ISO Description Order No. Carbide grades Dimensions

CVD PVD
uncoated coated coated

enter carbide P25M P40 K10 BK BK1 BK4 BK84 d1 s l ␥ f r

grade

왔
03 04 21 60 61 64 84
WOEX 03T102-01 W28 10010.02.. % % % % % % .197 .079 .130 8° .108 .008

WOEX 040204-01 W28 17010.04.. % % % % % % .236 .098 .157 8° .129 .016

WOEX 050304-01 W28 24010.04.. % % % % % % .315 .118 .209 12° .173 .016
WOEX 050308-01 W28 24010.08.. % .315 .118 .209 12° .171 .031

WOEX 060304-01 W28 34010.04.. % % % % % % .394 .118 .260 12° .217 .016

WOEX 08T304-01 W28 42010.04.. % % % % % % .472 .150 .311 12° .261 .016

WOEX 10T304-01 W28 50010.04.. % % % % % % .591 .169 .390 12° .326 .016

WOEX 120408-01 W28 58010.08.. % % % % % .693 .197 .457 12° .381 .031

Cast iron, graphite cast iron Order example:

Non-ferrous metals % Availability: for delivery see Description WOEX 060304-01
Stainless steel current price and stock list Carbide grade P 40
Mild steel / tool steel # To be discontinued Order No.: W28 34010.0404
41
 Unisix® Inserts

W 29 .. 02 (WOEX)
Inserts W 29 ..02... l
(WOEX heavy duty) f
r 8°
Neutral molded chipbreaker with
24°
honed cutting edge and land. d1

84° s

ISO Description Order No. Carbide grades Dimensions

CVD PVD
uncoated coated coated

enter carbide P25M P40 BK BK4 BK84 d1 s l f r

code

왔
03 04 60 64 84
WOEX 05T304-02 W29 24020.04.. % % % % % .315 .150 .209 .173 .016
WOEX 05T308-02 W29 24020.08.. % .315 .150 .209 .171 .031

WOEX 06T304-02 W29 34020.04.. % % % % % .394 .150 .260 .217 .016

WOEX 06T308-02 W29 34020.08.. % .394 .150 .260 .215 .031

WOEX 080404-02 W29 42020.04.. % % % % % .472 .189 .311 .261 .016

WOEX 100504-02 W29 50020.04.. % % % % .591 .209 .390 .326 .016

WOEX 120608-02 W29 58020.08.. % % % .693 .236 .457 .381 .031

Cast iron, graphite cast iron Order example:

Non-ferrous metals % Availability: for delivery see Description WOEX 05T304-02
Stainless steel current price and stock list Carbide grade P 40
Mild steel / tool steel # To be discontinued Order No.: W29 24020.0404
42
W 28 .. 02 (WOEX)
Inserts W 28 ..02... l
(WOEX regular) f
r 8°
Neutral molded chipbreaker with
24°
honed cutting edge and land. d1

84° s

ISO Description Order No. Carbide grades Dimensions

CVD
uncoated coated

enter carbide P25M BK d1 s l f r

grade

왔
03 60
WOEX 050304-02 W28 24020.04.. % % .315 .118 .209 .173 .016

WOEX 060304-02 W28 34020.04.. % % .394 .118 .260 .217 .016

WOEX 10T304-02 W28 50020.04.. % .591 .169 .390 .326 .016

Cast iron, graphite cast iron Order example:

Non-ferrous metals % Availability: for delivery see Description WOEX 060304-02
Stainless steel current price and stock list Carbide grade P 25 M
Mild steel / tool steel # To be discontinued Order No.: W28 34020.0403
43
 Unisix® Inserts

W 29 .. 03 (WOEX)
Inserts W 29 ..03... l
(WOEX heavy duty) f
r 8°

24°
d1

84° s

ISO Description Order No. Carbide grades Dimensions

CVD PVD
uncoated coated coated

enter carbide P25M P40 BK3 BK84 d1 s l f r

code
03 04 63 84
왔

WOEX 05T304-03 W29 24030.04.. % % % % .315 .150 .209 .173 .016

WOEX 06T304-03 W29 34030.04.. % % % % .394 .150 .260 .217 .016

WOEX 06T308-03 W29 34030.08.. % .394 .150 .260 .215 .031

WOEX 080404-03 W29 42030.04.. % % % % .472 .189 .311 .261 .016

WOEX 080408-03 W29 42030.08.. % % .472 .189 .311 .259 .031

WOEX 100504-03 W29 50030.04.. % % % % .591 .209 .390 .326 .016

WOEX 100508-03 W29 50030.08.. % % .591 .209 .390 .324 .031

WOEX 120608-03 W29 58030.08.. % % % % .693 .236 .457 .381 .031

Cast iron, graphite cast iron Order example:

Non-ferrous metals % Availability: for delivery see Description WOEX 05T304-03
Stainless steel current price and stock list Carbide grade BK 3
Mild steel / tool steel # To be discontinued Order No.: W29 24030.0463
44
W 28 .. 03 (WOEX)
Inserts W 28 ..03... l
(WOEX standard) f
r 8°

24°
d1

84° s

Description Order No. Carbide grades Dimensions

(ISO Description) CVD
uncoated coated

enter carbide P25M BK3 d1 s l f r

grade

왔
03 63
WOEX 03T102-03 W28 10030.02.. % .197 .079 .130 .108 .008

WOEX 040204-03 W28 17030.04.. % % .236 .098 .157 .129 .016

WOEX 050304-03 W28 24030.04.. % % .315 .118 .209 .173 .016

WOEX 060304-03 W28 34030.04.. % % .394 .118 .260 .217 .016

WOEX 08T304-03 W28 42030.04.. % % .472 .150 .311 .261 .016

WOEX 10T304-03 W28 50030.04.. % % .591 .169 .390 .326 .016

Cast iron, graphite cast iron Order example:

Non-ferrous metals % Availability: for delivery see Description WOEX 03T102-03
Stainless steel current price and stock list Carbide grade BK 3
Mild steel / tool steel # To be discontinued Order No.: W28 10030.0263
45
 Unisix® Inserts

W 29 .. 11 (WOEX)
Inserts W 29 ..11...
l ␥
(WOEX heavy duty style)
8°
r
d1

84° s

ISO Description Order No. Carbide grades Dimensions

diamond PVD
uncoated coated coated

enter carbide K10 BK50 BK77 d1 s l ␥ r

code

왔
21 50 77
WOEX 030204-11 W29 10110.04.. % % % .197 .091 .126 20° .016

WOEX 040304-11 W29 18110.04.. % % % .250 .125 .161 20° .016

WOEX 05T304-11 W29 24110.04.. % % % .315 .150 .209 20° .016

WOEX 06T304-11 W29 34110.04.. % % % .394 .150 .260 20° .016

WOEX 080404-11 W29 42110.04.. % % % .472 .189 .311 20° .016

WOEX 100504-11 W29 50110.04.. % % % .591 .209 .390 20° .016

Cast iron, graphite cast iron Order example:

Non-ferrous metals % Availability: for delivery see Description WOEX 05T304-11
Stainless steel current price and stock list Carbide grade BK 77
Mild steel / tool steel # To be discontinued Order No.: W29 24110.0411
46
W 29 .. 13 (WOEX)
Inserts W 29 ..13...
(WOEX heavy duty style) l
8°
Note: r
Because of the special cutting
d1
edge geometry, the inserts
W29..13 can only be used for
R.H. cutting KUB® drills. Patent pending
84° s

ISO Description Order No. Carbide grades Dimensions

CVD PVD
Uncoated coated coated

enter carbide P40 BK74 BK79 BK84 d1 s l r

code

왔
04 74 79 84
WOEX 030204-13 W29 10130.04.. % % % % .197 .091 .126 .016

WOEX 040304-13 W29 18130.04.. % % % % .250 .125 .161 .016

WOEX 05T304-13 W29 24130.04.. % % % % .315 .150 .209 .016

WOEX 06T304-13 W29 34130.04.. % % % % .394 .150 .260 .016

WOEX 080404-13 W29 42130.04.. % % % % .472 .189 .311 .016

WOEX 100504-13 W29 50130.04.. % % % % .591 .209 .390 .016

WOEX 120604-13 W29 58130.08.. % % % % .693 .236 .457 .031

Cast iron, graphite cast iron Order example:

Non-ferrous metals % Availability: for delivery see Description WOEX 05T304-13
Stainless steel current price and stock list Carbide grade BK 79
Mild steel / tool steel # To be discontinued Order No.: W29 24130.0479
47
 Inserts

W 30 (TOHX)
Inserts W 30 d1 ␥ 84°
(TOHX) L.H. cutting form r
60°
8°
L.H. cutting form with positive ground
f
chipbreaker.
l

Important note! L.H. cutting form

The cutting edge on Cermet inserts is without tip radius
honed. s r = 0.0 in
ISO Description Order No. Carbide grades Cermet Dimensions
CVD PVD PVD
uncoated coated coated uncoated coated

P25M K10 BK BK1 BK4 BK62 BK84 CK32 CK37 CK30 CK38
Cutting edge design d1 s l ␥ f r
E = honed E E F E E E E E E E E E
F = sharp
왔 enter carbide code 왔 03 21 60 61 64 62 84 32 37 30 38
TOHX 06T100 ..L-G06 W30 04060.30.. % % % % % .157 .071 .138 6° .128 .000
TOHX 06T102 ..L-G06 W30 04060.02.. % % % % % % % .157 .071 .138 6° .131 .008
TOHX 06T103 ..L-G06 W30 04060.03.. % % % % % % % .157 .071 .138 6° .128 .012
TOHX 06T104 ..L-G06 W30 04060.04.. % % % % .157 .071 .138 6° .125 .016
TOHX 06T100 ..L-G06 W30 04120.30.. # % % .157 .071 .138 12° .128 .000
TOHX 06T102 ..L-G12 W30 04120.02.. % % % % % % % % % % % .157 .071 .138 12° .131 .008
TOHX 06T103 ..L-G12 W30 04120.03.. % % % % % % % % % .157 .071 .138 12° .128 .012
TOHX 06T104 ..L-G12 W30 04120.04.. % % % % % % % % .157 .071 .138 12° .125 .016
TOHX 06T102 ..L-G20 W30 04200.02.. # % % % .157 .071 .138 20° .131 .008
TOHX 06T103 ..L-G20 W30 04200.03.. % % .157 .071 .138 20° .128 .012
TOHX 090200 ..L-G06 W30 14060.30.. % % % # % .220 .098 .177 6° .179 .000
TOHX 090202 ..L-G06 W30 14060.02.. % % % % % % % .220 .098 .177 6° .185 .008
TOHX 090204 ..L-G06 W30 14060.04.. % % % % % % % .220 .098 .177 6° .179 .016
TOHX 090208 ..L-G06 W30 14060.08.. # % % % # % % .220 .098 .177 6° .168 .031
TOHX 090200 ..L-G12 W30 14120.30.. % % % % .220 .098 .177 12° .179 .000
TOHX 090202 ..L-G12 W30 14120.02.. % % % % % % % % % % % .220 .098 .177 12° .185 .008
TOHX 090204 ..L-G12 W30 14120.04.. % % % % % % % % % % % .220 .098 .177 12° .179 .016
TOHX 090208 ..L-G12 W30 14120.08.. % % % .220 .098 .177 12° .168 .031
TOHX 090202 ..L-G20 W30 14200.02.. % % % % .220 .098 .177 20° .185 .008
TOHX 090204 ..L-G20 W30 14200.04.. # % % % .220 .098 .177 20° .179 .016
TOHX 140302 ..L-G06 W30 26060.02.. % % % % % % .323 .118 .236 6° .274 .008
TOHX 140304 ..L-G06 W30 26060.04.. % % % % % .323 .118 .236 6° .268 .016
TOHX 140305 ..L-G06 W30 26060.05.. % % % % % % % .323 .118 .236 6° .265 .020
TOHX 140308 ..L-G06 W30 26060.08.. % % % .323 .118 .236 6° .257 .031
TOHX 140302 ..L-G12 W30 26120.02.. % % % % % % % % % % % .323 .118 .236 12° .274 .008
TOHX 140304 ..L-G12 W30 26120.04.. % % % % % % % .323 .118 .236 12° .268 .016
TOHX 140305 ..L-G12 W30 26120.05.. % % % % % % % % % .323 .118 .236 12° .265 .020
TOHX 140308 ..L-G12 W30 26120.08.. % % .323 .118 .236 12° .257 .031
TOHX 140302 ..L-G20 W30 26200.02.. % .323 .118 .236 20° .274 .008
TOHX 140305 ..L-G20 W30 26200.05.. % .323 .118 .236 20° .265 .020
TOHX 22T308 ..L-G06 W30 44060.08.. % % .500 .169 .472 6° .410 .031
TOHX 22T308 ..L-G12 W30 44120.08.. % # # % .500 .169 .472 12° .410 .031

Cast iron, graphite cast iron Order example:

Non-ferrous metals % Availability: for delivery see Description TOHX 06T100 EL-G06
Stainless steel current price and stock list Carbide grade K 10
Mild steel / tool steel # To be discontinued Order No.: W30 04060.3021
48
W 30 (TOHX)
Inserts W 30 ␥ d1
(TOHX) R.H. cutting form r

8°
R.H. cutting form with positive ground
chipbreaker. f
l

Important note!
The cutting edge on Cermet inserts is
honed. s

Description Order No. Carbide grades Cermet Dimensions

(ISO Description) CVD PVD PVD
uncoated coated coated uncoated coated

P25M K10 BK BK1 BK4 BK62 BK84 CK32 CK37 CK30 CK38
Cutting edge design d1 s l ␥ f r
E = honed E E F E F E E E E E E E E
F = sharp
왔 enter carbide code 왔 03 21 60 61 64 62 84 32 37 30 38
TOHX 06T102 ..R-G06 W30 04360.02.. % % % # # .157 .071 .138 6° .131 .008
TOHX 06T103 ..R-G06 W30 04360.03.. % % % % # .157 .071 .138 6° .128 .012
TOHX 06T104 ..R-G06 W30 04360.04.. % % .157 .071 .138 6° .125 .016
TOHX 06T100 ..R-G12 W30 04420.30.. % .157 .071 .138 12° .128 .000
TOHX 06T102 ..R-G12 W30 04420.02.. % % % % # % % % % .157 .071 .138 12° .131 .008
TOHX 06T103 ..R-G12 W30 04420.03.. % % % # % % # % % .157 .071 .138 12° .128 .012
TOHX 06T104 ..R-G12 W30 04420.04.. % % % % .157 .071 .138 12° .125 .016
TOHX 06T102 ..R-G20 W30 04500.02.. % % .157 .071 .138 20° .131 .008
TOHX 06T103 ..R-G20 W30 04500.03.. % % % .157 .071 .138 20° .128 .012

TOHX 090202 ..R-G06 W30 14360.02.. % % % % % .220 .098 .177 6° .185 .008
TOHX 090204 ..R-G06 W30 14360.04.. % % % % % % % .220 .098 .177 6° .179 .016
TOHX 090202 ..R-G12 W30 14420.02.. % % % % % % % % % .220 .098 .177 12° .185 .008
TOHX 090204 ..R-G12 W30 14420.04.. % % % % % % % % % % % .220 .098 .177 12° .179 .016
TOHX 090202 ..R-G20 W30 14500.02.. % .220 .098 .177 20° .185 .008
TOHX 090204 ..R-G20 W30 14500.04.. % % .220 .098 .177 20° .179 .016

TOHX 140302 ..R-G06 W30 26360.02.. % % % % .323 .118 .236 6° .274 .008
TOHX 140304 ..R-G06 W30 26360.04.. % .323 .118 .236 6° .268 .016
TOHX 140305 ..R-G06 W30 26360.05.. % % % % % .323 .118 .236 6° .265 .020
TOHX 140302 ..R-G12 W30 26420.02.. % % % % % % % % % .323 .118 .236 12° .274 .008
TOHX 140304 ..R-G12 W30 26420.04.. % % .323 .118 .236 12° .268 .016
TOHX 140305 ..R-G12 W30 26420.05.. % % % % % % .323 .118 .236 12° .265 .020
TOHX 140305 ..R-G20 W30 26500.05.. # % .323 .118 .236 20° .265 .020

TOHX 22T308 ..R-G06 W30 44360.08.. % % .500 .169 .472 6° .410 .031
TOHX 22T308 ..R-G12 W30 44420.08.. # % % .500 .169 .472 12° .410 .031

Cast iron, graphite cast iron Order example:

Non-ferrous metals % Availability: for delivery see Description TOHX 06T102 ER-G06
Stainless steel current price and stock list Carbide grade K 10
Mild steel / tool steel # To be discontinued Order No.: W30 04360.0221
49
 Inserts

W 30 (TOHX)
Inserts W 30 d1
(TOHX) Neutral cutting form r
8°

ISO Description Order No. Carbide grades Dimensions

CVD PVD
uncoated coated coated

enter carbide P25M K10 BK BK1 BK62 BK84 d1 s l f r

code

왔
03 21 60 61 62 84
TOHX 06T103 EN W30 04600.03.. % % % % % % .157 .071 .256 .128 .012
TOHX 090202 EN W30 14600.02.. % .220 .098 .370 .185 .008
TOHX 090204 EN W30 14600.04.. % % % % % % .220 .098 .358 .179 .016
TOHX 140305 EN W30 26600.05.. % % # % % % .323 .118 .531 .265 .020
TOHX 140308 EN W30 26600.08.. % # % .323 .118 .512 .257 .031
TOHX 22T308 EN W30 44600.08.. # % % % .500 .169 .819 .410 .031
Order example: Description TOHX 06T103 EN / Carbide grade K 10 / Order No.: W30 04600.0321

Inserts W 30 d1 ␥
(TOHX) Cutting form , F" r
8°
Three positive ground chipbreakers
f

ISO Description Order No. Carbide grades Dimensions

CVD PVD
uncoated coated coated

P25M K10 BK BK1 BK4 BK62 BK84

Cutting edge design d1 s l ␥ f r
E = honed E E F E E E E E
F = sharp
왔 enter carbide code 왔 03 21 60 61 64 62 84
TOHX 06T103 ..N-G06 W30 04660.03.. % % % % % .157 .071 .256 6° .128 .012
TOHX 06T103 ..N-G12 W30 04720.03.. % % .157 .071 .256 12° .128 .012
TOHX 090202 ..N-G06 W30 14660.02.. % % % % .220 .098 .370 6° .185 .008
TOHX 090204 ..N-G06 W30 14660.04.. % % % % % % % .220 .098 .358 6° .179 .016
TOHX 090204 ..N-U8.77 W30 14660.33.. % % % % % .220 .098 .358 6° .179 .016
TOHX 090204 ..N-G12 W30 14720.04.. % % % % % .220 .098 .358 12° .179 .016
TOHX 090204 ..N-G20 W30 14800.04.. % # .220 .098 .358 20° .179 .016
TOHX 140305 ..N-G06 W30 26660.05.. % % % % % % % .323 .118 .531 6° .265 .020
TOHX 140605 ..N-G12 W30 26720.05.. % % % .323 .118 .531 12° .265 .020
TOHX 22T308 ..N-G06 W30 44660.08.. % % % % % % .500 .169 .819 6° .410 .031

Cast iron, graphite cast iron Order example:

Non-ferrous metals % Availability: for delivery see Description TOHX 090204 EN-G06
Stainless steel current price and stock list Carbide grade K 10
Mild steel / tool steel # To be discontinued Order No.: W30 14660.0421
50
W 30 (TOHX)
Inserts W 30 d1 ␥
(TOHX) L.H. cutting form r
Sharp cutting edge 8°
f
l

ISO Description Order No. Cermet Dimensions

PVD
uncoated coated

enter carbide CK32 CK37 CK30 CK38 d1 s l ␥ f r

grade

왔
32 37 30 38
TOHX 06T102 FL-G12 W30 04820.02.. % % % % .157 .071 .138 12° .131 .008
TOHX 06T103 FL-G12 W30 04820.03.. % % .157 .071 .138 12° .128 .012
TOHX 06T104 FL-G12 W30 04820.04.. % % .157 .071 .138 12° .125 .016
TOHX 090202 FL-G12 W30 14820.02.. % % % % .220 .098 .177 12° .185 .008
TOHX 090204 FL-G12 W30 14820.04.. % % % % .220 .098 .177 12° .179 .016
TOHX 140302 FL-G12 W30 26820.02.. % % % .323 .118 .236 12° .274 .008
TOHX 140304 FL-G12 W30 26820.04.. % % .323 .118 .236 12° .268 .016
TOHX 140305 FL-G12 W30 26820.05.. % % .323 .118 .236 12° .265 .020

Order example: Description TOHX 090202 FL-G12 / Quality CK 37 / Order No.: W30 14820.0237

Inserts W 30 ␥ d1
(TOHX) R.H. cutting form r
Sharp cutting edge
8°
f
l

ISO Description Order No. Cermet Dimensions

uncoated

enter carbide CK32 CK37 CK30 d1 s l ␥ f r

grade

왔
32 37 30
TOHX 06T102 FR-G12 W30 04830.02.. % % .157 .071 .138 12° .131 .008
TOHX 06T103 FR-G12 W30 04830.03.. % .157 .071 .138 12° .128 .012
TOHX 090202 FR-G12 W30 14830.02.. % % .220 .098 .177 12° .185 .008
TOHX 090204 FR-G12 W30 14830.04.. % .220 .098 .177 12° .179 .016

Cast iron, graphite cast iron Order example:

Non-ferrous metals % Availability: for delivery see Description TOHX 090202 FR-G12
Stainless steel current price and stock list Quality CK 37
Mild steel / tool steel # To be discontinued Order No.: W30 14830.0237
51
 Inserts

W 30 ..... . 31 (TOHX) / W 30 ..... . 39 (TOHX)

Inserts W 30 d1 ␥
(TOHX) L.H. cutting form r
8°
L.H. cutting form with
l
positive ground chipbreaker. f

ISO Description Order No. Carbide grades Cermet Dimensions

CVD PVD PVD
uncoated coated coated uncoated coated

K10 BK BK4 BK84 CK30 CK38

Cutting edge design d1 s l ␥ f r
E = honed E F E E E E E
F = sharp 60 64
왔 enter carbide code 왔 21 84 30 38
TOHX 06T102 ..L-UF06 W30 04060.31.. % % % .157 .071 .110 6° .128 .079
TOHX 06T102 ..L-UF12 W30 04120.31.. % % # % % % .157 .071 .110 12° .128 .079

TOHX 090200 ..L-UF06 W30 14060.31.. % % % % % .220 .098 .157 6° .169 .118
TOHX 090202 ..L-UF12 W30 14120.31.. % % % % % .220 .098 .157 12° .169 .118

TOHX 140302 ..L-UF06 W30 26060.31.. % % % % .323 .118 .217 6° .254 .118
TOHX 140302 ..L-UF12 W30 26120.31.. # % % % % .323 .118 .217 12° .254 .118
Order example: Description TOHX 06T102 EL-UF12 / Carbide grade K 10 / Order No.: W30 04120.3121

Inserts W 30 d1 ␥
(TOHX) L.H. cutting form r
8°
L.H. cutting form with l
positive ground chipbreaker. f

71° s

ISO Description Order No. Carbide grades Dimensions

PVD
coated

enter carbide BK77 d1 s l ␥ f r

code

왔
77
TOHX 06T1ZZ EL-39G12 W30 04120.39.. % .157 .071 .079 12° .125 .002

TOHX 0902ZZ EL-39G12 W30 14120.39.. % .220 .098 .118 12° .175 .002

TOHX 1403ZZ EL-39G12 W30 26120.39.. % .323 .118 .157 12° .260 .002

Cast iron, graphite cast iron Order example:

Non-ferrous metals % Availability: for delivery see Description TOHX 0902ZZ EL-39G12
Stainless steel current price and stock list Carbide grade BK 77
Mild steel / tool steel # To be discontinued Order No.: W30 04120.3977
52
W 30 ..... . 32 (TOHX)
Inserts W 30 d1 ␥
(TOHX) L.H. cutting form r
8°
L.H. cutting form with
l
positive ground chipbreaker. f

Important note!
The cutting edge on Cermet inserts is
honed. 80° s

ISO Description Order No. Carbide grades Cermet Dimensions

CVD PVD PVD
uncoated coated coated uncoated coated

K10 BK BK4 BK84 CK30 CK38

Cutting edge design d1 s l ␥ f r
E = honed E F E E E E E
F = sharp 21
왔 enter carbide code 왔 60 64 84 30 38
TOHX 06T102 ..L-US12 W30 04120.32.. % % % % % % .157 .071 .059 12° .116 .008

TOHX 090202 ..L-US12 W30 14120.32.. % # % % % .220 .098 .079 12° .169 .008

TOHX 140302 ..L-US12 W30 26120.32.. # # % % % % .323 .118 .079 12° .254 .008

Order example: Description TOHX 06T102 FL-US12 / Carbide grade K 10 / Order No.: W30 04120.3221

Inserts W 30 d1 ␥
(TOHX) L.H. cutting form r
Sharp cutting edge 8°
l
L.H. cutting form with positive ground f
chipbreaker.

80° s

ISO Description Order No. Cermet Dimensions

PVD
uncoated coated

enter carbide CK30 CK38 d1 s l ␥ f r

grade

왔
30 38
TOHX 06T102 FL-US12 W30 04820.32.. % % .157 .071 .059 12° .116 .008

TOHX 090202 FL-US12 W30 14820.32.. % % .220 .098 .079 12° .169 .008

TOHX 140302 FL-US12 W30 26820.32.. % % .323 .118 .079 12° .254 .008

Cast iron, graphite cast iron Order example:

Non-ferrous metals % Availability: for delivery see Description TOHX 06T102 FL-US12
Stainless steel current price and stock list Quality CK 30
Mild steel / tool steel # To be discontinued Order No.: W30 04820.3230
53
 Inserts

W 30 (TOGX)
Inserts W 30 s d1
(TOGX) r
with PCD and CBN cutting edges 8°

l f

ISO Description Order No. Cutting material Dimensions

* above 45 HRC

PCD CBN CBN

*
Cutting edge design d1 s l f r
F = sharp F T T
T = land min.
왔 enter carbide code 왔 55 57 40
TOGX 06T102 ..N W30 04990.02.. % % % .157 .071 .071 .131 .008
TOGX 06T103 ..N W30 04990.03.. % % .157 .071 .071 .128 .012
TOGX 06T104 ..N W30 04990.04.. % .157 .071 .071 .125 .016

TOGX 090202 ..N W30 14990.02.. % % % .220 .098 .106 .185 .008
TOGX 090204 ..N W30 14990.04.. % % % .220 .098 .106 .179 .016
TOGX 090508 ..N W30 14990.08.. % .220 .098 .106 .168 .031

TOGX 140302 ..N W30 26990.02.. % % .323 .118 .106 .274 .008
TOGX 140304 ..N W30 26990.04.. % % % .323 .118 .106 .268 .016
TOGX 140305 ..N W30 26990.05.. % % .323 .118 .106 .265 .020

Cast iron, graphite cast iron Order example:

Non-ferrous metals % Availability: for delivery see Description TOGX 06T102 FN
Stainless steel current price and stock list Cutting material PCD
Mild steel / tool steel # To be discontinued Order No.: W30 04990.0255
54
Inserts W 30 s d1
(TOGX) r
with PCD and CBN cutting edges 8°

f l

ISO Description Order No. Cutting material Dimensions

PCD CBN
Cutting edge design d1 s l f r
F = sharp F T
T = land 55 57
왔 enter carbide code 왔

TOGX 090204 .. W30 14940.04.. % % .220 .098 .359 .179 .016

TOGX 140305 .. W30 26940.05.. % % .323 .118 .531 .265 .020

Cast iron, graphite cast iron Order example:

Non-ferrous metals % Availability: for delivery see Description TOGX 090204 T
Stainless steel current price and stock list Cutting material CBN
Mild steel / tool steel # To be discontinued Order No.: W30 14940.0457
55
 Inserts for High Shear Non-ferrous Metal Boring

W 32 (TPHX)
Inserts W 32 ␥ Please note:
(TPHX with polished chip surface) d1 Should a TPHB be used instead of this insert,
s
with clamping screw r dimension "a" changes according to angle ⑂
L.H. cutting form ⑂ 11°

a
l f ⑂
a ⫽ cos (⑂⫺60°) ⫻ (d1⫺2r) ⫹ r ⫺ ( ⫻⌬)
90°
60° ⌬.0012 for r⫽.016 / ⌬.0024 for r⫽.031

ISO Description Order No. Carbide grades

Dimensions
diamond PVD
uncoated coated coated

enter carbide K10 BK50 BK77 d1 s l ␥ f r

code
⑂ⴝ90°
왔
21 50 77
TPHX 060104 FL W32 03150.04.. % % % .156 .063 .130 15° .123 .016

TPHX 090204 FL W32 13150.04.. % % % .219 .094 .177 15° .177 .016
TPHX 090208 FL W32 13150.08.. % % % .219 .094 .165 15° .164 .031

TPHX 110204 FL W32 18150.04.. % % % .250 .094 .181 15° .204 .016
TPHX 110208 FL W32 18150.08.. % % % .250 .094 .169 15° .192 .031

TPHX 130304 FL W32 23150.04.. % % % .313 .125 .197 15° .258 .016
TPHX 130308 FL W32 23150.08.. % % % .313 .125 .185 15° .246 .031

TPHX 160304 FL W32 32150.04.. % % % .375 .125 .315 15° .312 .016
TPHX 160308 FL W32 32150.08.. % % % .375 .125 .303 15° .299 .031

TPHX 220408 FL W32 44150.08.. % % % .500 .169 .409 15° .407 .031

Cast iron, graphite cast iron Order example:

Non-ferrous metals % Availability: for delivery see Description TPHX 06 01 04-FL
Stainless steel current price and stock list Carbide grade K 10
Mild steel / tool steel # To be discontinued Order No.: W32 03150.0421
56
W 32 (TPHX)
Inserts W 32 ␥ Please note:
(TPHX with polished chip surface) d1 Should a TPHB be used instead of this insert,
s
with clamping screw r dimension "a" changes according to angle ⑂
11°
R.H. cutting form ⑂

a
f l ⑂
a ⫽ cos (⑂⫺60°) ⫻ (d1⫺2r) ⫹ r ⫺ ( ⫻⌬)
90°
60° ⌬.0012 for r⫽.016 / ⌬.0024 for r⫽.031

ISO Description Order No. Carbide grades Dimensions

uncoated

enter carbide K10 d1 s l ␥ f r

grade
⑂ⴝ90°
왔
21
TPHX 060104 FR W32 03450.04.. % .156 .063 .130 15° .123 .016

TPHX 090204 FR W32 13450.04.. % .219 .094 .177 15° .177 .016

TPHX 110204 FR W32 18450.04.. % .250 .094 .181 15° .204 .016

TPHX 130304 FR W32 23450.04.. % .313 .125 .197 15° .258 .016

TPHX 160304 FR W32 32450.04.. % .375 .125 .315 15° .312 .016

TPHX 220408 FR W32 44450.08.. % .500 .169 .409 15° .407 .031

Cast iron, graphite cast iron Order example:

Non-ferrous metals % Availability: for delivery see Description TPHX 06 01 04-FR
Stainless steel current price and stock list Carbide grade K 10
Mild steel / tool steel # To be discontinued Order No.: W32 03450.0421
57
 Inserts for High Shear Non-ferrous Metal Boring

W 32 (TPHB)
Inserts W 32 s d1
(TPHB) r
with PCD cutting edges 11°

l f

ISO Description Order No. Cutting material Dimensions

enter carbide PCD d1 s l f r

grade

왔
55
TPHB 060104 FN W32 03990.04.. % .156 .063 .071 .124 .016

TPHB 090204 FN W32 13990.04.. % .219 .094 .106 .178 .016

TPHB 110204 FN W32 18990.04.. % .250 .094 .150 .205 .016

TPHB 130304 FN W32 23990.04.. % .313 .125 .150 .259 .016

TPHB 160304 FN W32 32990.04.. % .375 .125 .150 .313 .016

Order example: Description TPHB 060104 FN / Cutting material PCD / Order No.: W32 03990.0455

Inserts W 32 s d1
(TPHB) r
with PCD cutting edges 11°

f l

ISO Description Order No. Cutting material Dimensions

enter carbide PCD d1 s l f r

grade

왔
55
TPHB 090204 F W32 13940.04.. % .219 .094 .356 .178 .016
TPHB 110204 F W32 18940.04.. % .250 .094 .410 .205 .016
TPHB 130304 F W32 23940.04.. % .313 .125 .519 .259 .016
TPHB 160304 F W32 32940.04.. % .375 .125 .626 .313 .016

Order example:
Description TPHB 090204 F
Cutting material PCD
Order No.: W32 13940.0455
58
W 32 (TPHB)
Inserts W 32 s d1
(TPHB with polished chip surface) r
with clamping screw 11°
⑂

a
f l

60° a ⫽ cos (⑂⫺60°) ⫻ (d1⫺2r) ⫹ r

ISO Description Order No. Carbide grades Dimensions

uncoated diamond coated

enter carbide K10 BK50 d1 s l f r

code
⑂ⴝ90°
왔
21 50
TPHB 060104 FN W32 03600.04.. % % .156 .063 .248 .124 .016
TPHB 090204 FN W32 13600.04.. % % .219 .094 .356 .178 .016
TPHB 090208 FN W32 13600.08.. % % .219 .094 .333 .167 .031
TPHB 110204 FN W32 18600.04.. % % .250 .094 .410 .205 .016
TPHB 110208 FN W32 18600.08.. % % .250 .094 .387 .193 .031
TPHB 130304 FN W32 23600.04.. % % .313 .125 .519 .259 .016
TPHB 130308 FN W32 23600.08.. % % .313 .125 .495 .248 .031
TPHB 160304 FN W32 32600.04.. % % .375 .125 .626 .313 .016
TPHB 160308 FN W32 32600.08.. % % .375 .125 .603 .302 .031
TPHB 220404 FN W32 44600.04.. % % .500 .169 .843 .421 .016
TPHB 220408 FN W32 44600.08.. % % .500 .169 .820 .410 .031
Order example: Description TPHB 060104 FN / Carbide grade K 10 / Order No.: W32 03600.0421

59
 Inserts

W 34 (TOHT) / W 37 (TEHB)
Inserts W 34 d1 ␥
(TOHT) r
8°
3 positive ground
f
chip guide steps
l

ISO Description Order No. Carbide grades Dimensions

CVD
uncoated coated

enter carbide P25M K10 BK d1 s l ␥ f r

code

왔
03 21 60
TOHT 110304 EN-G06 W34 18660.04.. % % % .249 .126 .409 6° .205 .016

Order example: Description TOHT 110304 EN-G06 / Carbide grade K 10 / Order No.: W34 18660.0421

Inserts W 37 d1
for Machining Non-ferrous Metals r
(Typ TEHB with polished chip surface) 20°
with clamping screw f

ISO Description Order No. Carbide grades Dimensions

uncoated

enter carbide K10 d1 s l f r

code

왔
21
TEHB 110204 FN W37 18600.04.. % .250 .094 .409 .205 .016
TEHB 110208 FN W37 18600.08.. % .250 .094 .386 .193 .031
TEHB 130304 FN W37 23600.04.. % .313 .125 .520 .259 .016
TEHB 130308 FN W37 23600.08.. % .313 .125 .496 .248 .031
TEHB 160308 FN W37 32600.08.. % .375 .125 .602 .302 .031
Cast iron, graphite cast iron Order example:
Non-ferrous metals % Availability: for delivery see Description TEHB 110204 FN
Stainless steel current price and stock list Carbide grade K 10
Mild steel / tool steel # To be discontinued Order No.: W37 18600.0421
60
W 57 (TOHX / TOGX)
Inserts W 57 d1 ␥
(TOHX) r

with positive molded 8°

chip guide step f

l
Important note!
The cutting edge on Cermet inserts is
honed. s

ISO Description Order No. Cermet Dimensions

uncoated

enter carbide CK32 CK37 d 1 s l ␥ f r

grade

왔
32 37
TOHX 06T104 EN-04 W57 04040.04.. % % .157 .071 .248 14° .125 .016

TOHX 090204 EN-04 W57 14040.04.. % % .220 .098 .358 14° .179 .016

TOHX 140304 EN-04 W57 26040.04.. % % .323 .118 .535 14° .268 .016

Order example: Description TOHX 090204 EN-04 / Quality CK 32 / Order No.: W57 14040.0432

␥
Inserts W 57 d1
s
for Machining Non-ferrous Metals r
(TOGX) 8°
with molded and polished chip surface

l f

60°

ISO Description Order No. Carbide grades Dimensions

uncoated

enter carbide K10 d1 s l ␥ f r

code
23
왔

TOGX 06T102 FN-12 W57 04120.02.. % .157 .071 .261 30° .131 .008

TOGX 090204 FN-12 W57 14120.04.. % .220 .098 .359 30° .179 .016

TOGX 140304 FN-12 W57 26120.04.. % .323 .118 .536 30° .268 .016
Cast iron, graphite cast iron Order example:
Non-ferrous metals % Availability: for delivery see Description TOGX 06T102 FN-12
Stainless steel current price and stock list Carbide grade K 10
Mild steel / tool steel # To be discontinued Order No.: W57 04120.0221
61
 Inserts

W 58 (TPGX)
␥
Inserts W 58 d1
s
for Machining Non-ferrous Metals r
(TPGX) 11°
with molded and polished chip surface

l f

60°

ISO Description Order No. Carbide grades Dimensions

uncoated

enter carbide K10 d1 s l ␥ f r

code
23
왔

TPGX 060104 FN-12 W58 03120.04.. % .156 .063 .248 26° .124 .016

TPGX 090204 FN-12 W58 13120.04.. % .219 .094 .356 26° .178 .016

TPGX 110204 FN-12 W58 18120.04.. % .250 .094 .410 26° .205 .016

TPGX 130304 FN-12 W58 23120.04.. % .313 .125 .519 26° .259 .016

TPGX 160304 FN-12 W58 32120.04.. % .375 .125 .626 26° .313 .016
Order example: Description TPGX 060104 FN-12 / Carbide grade K 10 / Order No.: W58 03120.0421

Cast iron, graphite cast iron

Non-ferrous metals % Availability: for delivery see
Stainless steel current price and stock list
Mild steel / tool steel # To be discontinued
62
W 59 (TOHT)
Inserts W 59 d1 ␥
(TOHT) r

8°
with positive molded
f
chip guide step
l

ISO Description Order No. Carbide grades Dimensions

CVD PVD
uncoated coated coated

enter carbide P25M K10 BK BK4 BK79 BK84 d1 s l ␥ f r

grade

왔
03 21 60 64 79 84
TOHT 110304 EN-05 W59 18050.04.. % % % % % % .250 .126 .409 10° .205 .016

TOHT 160408 EN-05 W59 32050.08.. % % % % % % .375 .189 .602 10° .302 .031
TOHT 160405 EN-05 W59 32050.05.. % .375 .189 .622 10° .310 .020

Order example: Description TOHT 110304 EN-05 / Carbide grade K 10 / Order No.: W59 18050.0421

Cast iron, graphite cast iron

Non-ferrous metals % Availability: for delivery see
Stainless steel current price and stock list
Mild steel / tool steel # To be discontinued
63
 Inserts

W 60 (DOHT / DOHW)
␥
Inserts W 60 l
r
(DOHT) L.H. cutting form f
8°
L.H. cutting form with positive
ground chipbreaker. d1

55° s

ISO Description Order No. Carbide grades Dimensions

CVD
uncoated coated

P25M K10 BK
Cutting edge design d1 s l ␥ f r
E = honed E E F E
F = sharp
왔 enter carbide code 왔 03 21 60
DOHT 07T102 ..L-G06 W60 18060.02.. % # # .250 .094 .291 6° .233 .008
DOHT 07T104 ..L-G06 W60 18060.04.. % # % .250 .094 .291 6° .226 .016
DOHT 07T102 ..L-G12 W60 18120.02.. % % % .250 .094 .291 12° .233 .008
DOHT 07T104 ..L-G12 W60 18120.04.. % % % .250 .094 .291 12° .226 .016
DOHT 07T102 ..L-G20 W60 18200.02.. % .250 .094 .291 20° .233 .008

DOHT 11T304 ..L-G06 W60 32060.04.. % % % .375 .157 .441 6° .345 .016
DOHT 11T302 ..L-G12 W60 32120.02.. % % % .375 .157 .441 12° .353 .008
DOHT 11T304 ..L-G12 W60 32120.04.. % % % .375 .157 .441 12° .345 .016

Order example: Description DOHT 07T102 EL-G06 / Carbide grade P 25 M / Order No.: W60 18060.0203

Inserts W 60 r l
(DOHW) Neutral cutting form f
8°

d1

55° s

ISO Description Order No. Carbide grades Dimensions

uncoated

enter carbide K10 d1 s l f r

code

왔
21
DOHW 07T102 EN W60 18600.02.. % .250 .094 .291 .205 .008
DOHW 07T104 EN W60 18600.04.. % .250 .094 .291 .226 .016

DOHW 11T302 EN W60 32600.02.. % .375 .157 .441 .353 .008

DOHW 11T304 EN W60 32600.04.. % .375 .157 .441 .345 .016
Cast iron, graphite cast iron Order example:
Non-ferrous metals % Availability: for delivery see Description DOHW 07T102 EN
Stainless steel current price and stock list Carbide grade K 10
Mild steel / tool steel # To be discontinued Order No.: W60 18600.0221
64
W 60 (DOHT / DOGW)
Inserts W 60 ␥
l r
(DOHT) R.H. cutting form f
8°
R.H. cutting form with positive
ground chipbreaker. d1

s 55°

ISO Description Order No. Carbide grades Dimensions

CVD
uncoated coated

P25M K10 BK
Cutting edge design d1 s l ␥ f r
E = honed E E F E
F = sharp
왔 enter carbide code 왔 03 21 60
DOHT 07T102 ..R-G06 W60 18360.02.. % % % .250 .094 .291 6° .233 .008
DOHT 07T104 ..R-G06 W60 18360.04.. % .250 .094 .291 6° .226 .016
DOHT 07T102 ..R-G12 W60 18420.02.. % % % .250 .094 .291 12° .233 .008
DOHT 07T104 ..R-G12 W60 18420.04.. % % % .250 .094 .291 12° .226 .016
DOHT 07T102 ..R-G20 W60 18500.02.. % .250 .094 .291 20° .233 .008
DOHT 07T104 ..R-G20 W60 18500.04.. % .250 .094 .291 20° .226 .016
DOHT 11T304 ..R-G06 W60 32360.04.. % # % .375 .157 .441 6° .345 .016
DOHT 11T308 ..R-G06 W60 32360.08.. % .375 .157 .441 6° .331 .031
DOHT 11T302 ..R-G12 W60 32420.02.. % % % .375 .157 .441 12° .353 .008
DOHT 11T304 ..R-G12 W60 32420.04.. % % % .375 .157 .441 12° .345 .016
DOHT 11T308 ..R-G12 W60 32420.08.. % % .375 .157 .441 12° .331 .031
Order example: Description DOHT 11T304 ER-G12 / Carbide grade P 25 M / Order No.: W60 32420.0403

Inserts W 60 r f
(DOGW) l
8°

d1

55° s

ISO Description Order No. Cutting material Dimensions

* above 45 HRC

PCD CBN
*
CBN
Cutting edge design d1 s l f r
F = sharp F T T
T = land min.
왔 enter carbide code 왔 55 57 40
DOGW 07T102 ..N W60 18990.02.. % % % .250 .094 .118 .233 .008
DOGW 07T104 ..N W60 18990.04.. % % % .250 .094 .118 .226 .016

DOGW 11T302 ..N W60 32990.02.. % % % .375 .157 .118 .353 .008
DOGW 11T304 ..N W60 32990.04.. % % % .375 .157 .118 .345 .016
Cast iron, graphite cast iron Order example:
Non-ferrous metals % Availability: for delivery see Description DOGW 07T102 FN
Stainless steel current price and stock list Material grade PCD
Mild steel / tool steel # To be discontinued Order No.: W60 18990.0255
65
 Inserts

W 78 (VOHT / VOGW)
␥
Inserts W 78 r
8°
l
(VOHT) f

Copying insert with angular

molded chipbreaker 12° d1

35° s
ISO Description Order No. Carbide grades Dimensions
CVD
uncoated coated

P35 BK66 d1 s l ␥ f r
enter carbide code 왔 14 66
VOHT 110302-07 W78 18070.02.. % % .250 .125 .433 12° .379 .008
VOHT 110304-07 W78 18070.04.. % % .250 .125 .433 12° .362 .016

VOHT 160404-07 W78 32070.04.. % % .375 .187 .630 12° .560 .016
VOHT 160408-07 W78 32070.08.. % % .375 .187 .630 12° .526 .031

Order example: Description VOHT 110302-07 / Carbide grade BK 66 / Order No.: W78 18070.0266

Inserts W 78 r
8°
l f
(VOGW)

d1

35° s
ISO Description Order No. Material grade Dimensions

PCD tipped CBN tipped

Cutting edge design d1 s l f r
F = sharp F T
T = land
왔 enter carbide code 왔 55 57
VOGW 110304 ..N W78 18990.04.. % % .250 .125 2.5 .362 .016

VOGW 160408 ..N W78 32990.08.. % % .375 .187 3.5 .526 .031

Cast iron, graphite cast iron Order example:

Non-ferrous metals % Availability: for delivery see Description VOGW 160408 TN
Stainless steel current price and stock list Material grade CBN
Mild steel / tool steel # To be discontinued Order No.: W78 32990.0857
66
W 79 (DOHT)
Inserts W 79 ␥
r l
(DOHT) f
8°
Copying insert with angular
molded chipbreaker 12° d1

55° s

ISO Description Order No. Carbide grades Dimensions

CVD
uncoated coated

enter carbide P25M K10 BK BK1 BK4 d1 s l ␥ f r

grade

왔
03 21 60 61 64
DOHT 07T102-06 W79 18060.02.. % % % # % .250 .094 .291 12° .233 .008
DOHT 07T104-06 W79 18060.04.. % % % % % .250 .094 .291 12° .226 .016
DOHT 07T108-06 W79 18060.08.. % .250 .094 .291 12° .211 .031

DOHT 11T302-06 W79 32060.02.. % % % # .375 .157 .441 12° .353 .008
DOHT 11T304-06 W79 32060.04.. % % % % % .375 .157 .441 12° .345 .016
DOHT 11T308-06 W79 32060.08.. % % % % .375 .157 .441 12° .331 .031

Order example: Description DOHT 11T304-06 / Carbide grade K 10 / Order No.: W79 32060.0421

Inserts W 79 ␥
r l
(DOHT) f
8°
Copying Insert with positive
molded chipbreaker 14° d1

Important note!
The cutting edge on Cermet
inserts is honed. 55° s

ISO Description Order No. Cermet Dimensions

uncoated

enter carbide CK32 CK37 d1 s l ␥ f r

grade

왔
32 37
DOHT 07T104-04 W79 18040.04.. % % .250 .094 .291 14° .226 .016

DOHT 11T307-04 W79 32040.04.. % % .375 .157 .441 14° .345 .016

Cast iron, graphite cast iron Order example:

Non-ferrous metals % Availability: for delivery see Description DOHT 11T307-04
Stainless steel current price and stock list Grade CK 32
Mild steel / tool steel # To be discontinued Order No.: W79 32040.0432
67
 Inserts for High Shear Non-ferrous Metal Boring

W 83 (SPGT / SPGW)
Inserts W 83 l
(SPGT)
Precision ground chip guide step, 15° 11°

r
␥
d1 s

ISO Description Order No. Carbide grades Dimensions

diamond PVD
uncoated coated coated

enter carbide K10 BK50 BK77 d1 s l ␥ r

code

왔
21 50 77
SPGT 060202 FL-P15 W83 18000.01.. % % % .250 .094 .178 15° .008
SPGT 060204 FL-P15 W83 18000.03.. % % % .250 .094 .165 15° .016

SPGT 09T304 FL-P15 W83 32000.03.. % % % .375 .156 .261 15° .016
SPGT 09T308 FL-P15 W83 32000.05.. % % % .375 .156 .247 15° .031

SPGT 120404 FL-P15 W83 44000.14.. % % % .500 .187 .330 15° .016
SPGT 120408 FL-P15 W83 44000.15.. % % % .500 .187 .316 15° .031

Order example: Description SPGT 060204 FL-P15 / Carbide grade K 10 / Order No.: W83 18000.0121

Inserts W 83
(SPGW) r
Neutral chip guide step 11°
l

d1 s

ISO Description Order No. Cutting material Dimensions

enter carbide PCD d1 s l r

code

왔
55
SPGW 060204 FN W83 18000.13.. % .250 .094 .118 .016

SPGW 09T304 FN W83 32000.13.. % .375 .156 .118 .016

SPGW 09T308 FN W83 32000.14.. % .375 .156 .118 .031

SPGW 120404 FN W83 44000.16.. % .500 .187 .118 .016

SPGW 120408 FN W83 44000.17.. % .500 .187 .118 .031
Cast iron, graphite cast iron Order example:
Non-ferrous metals % Availability: for delivery see Description SPGW 060204 FN
Stainless steel current price and stock list Cutting material PCD
Mild steel / tool steel # To be discontinued Order No.: W83 18000.1355
68
W 83 (SPGW)
Inserts W 83
(SPGW) r
with polished chipbreaker 11°

d1 = l s

ISO Description Order No. Carbide grades Dimensions

uncoated

enter carbide K10 d1 s r

grade

왔
21
SPGW 060202 FN W83 18000.15.. % 6,35 2,38 0,2
SPGW 060204 FN W83 18000.16.. % 6,35 2,38 0,4

SPGW 09T304 FN W83 32000.18.. % 9,52 3,97 0,4

SPGW 09T308 FN W83 32000.19.. % 9,52 3,97 0,8

SPGW 120404 FN W83 44000.20.. % 12,70 4,76 0,4

SPGW 120408 FN W83 44000.21.. % 12,70 4,76 0,8

Cast iron, graphite cast iron Order example:

Non-ferrous metals % Availability: for delivery see Description SPGW 060202 FN
Stainless steel current price and stock list Carbide grade K 10
Mild steel / tool steel # To be discontinued Order No.: W83 18000.1521
69
 Inserts for High Shear Non-ferrous Metal Boring

W 85 (CPGT / CPGW)
Inserts W 85
(CPGT) l ␥
r
Precision ground chip guide step, 15°
11°

d1

ISO Description Order No. Carbide grades Dimensions

diamond PVD
uncoated coated coated

enter carbide K10 BK50 BK77 d1 s l ␥ r

code

왔
21 50 77
CPGT 040102 FL-P15 W85 09000.01.. % % % .187 .063 .189 15° .008
CPGT 040104 FL-P15 W85 09000.03.. % % % .187 .063 .189 15° .016

CPGT 060202 FL-P15 W85 18000.06.. % % % .250 .094 .254 15° .008
CPGT 060204 FL-P15 W85 18000.08.. % % % .250 .094 .254 15° .016

CPGT 09T304 FL-P15 W85 32000.23.. % % % .375 .156 .380 15° .016
CPGT 09T308 FL-P15 W85 32000.24.. % % % .375 .156 .380 15° .031

CPGT 120404 FL-P15 W85 44000.29.. % % % .500 .187 .508 15° .016
CPGT 120408 FL-P15 W85 44000.30.. % % % .500 .187 .508 15° .031
Order example: Description CPGT 040102 FL-P15 / Carbide grade BK 77 / Order No.: W85 09000.0177
l
Inserts W 85 r
(CPGW) 11°
Neutral chip guide step
d1

ISO Description Order No. Cutting material Dimensions

enter carbide PCD d1 s l r

code

왔
55
CPGW 060204 FL W85 18000.21.. % .250 .094 .254 .016

CPGW 09T304 FL W85 32000.19.. % .375 .156 .380 .016

CPGW 09T308 FL W85 32000.20.. % .375 .156 .380 .031

CPGW 120404 FL W85 44000.25.. % .500 .187 .508 .016

CPGW 120408 FL W85 44000.26.. % .500 .187 .508 .031
Cast iron, graphite cast iron Order example:
Non-ferrous metals % Availability: for delivery see Description CPGW 09T304 FL
Stainless steel current price and stock list Cutting material PKD
Mild steel / tool steel # To be discontinued Order No.: W85 32000.1955
70
W 85 (CPGW)
Inserts W 85 l
(CPGW) r
with polished chipbreaker 11°

d1

ISO Description Order No. Carbide grades Dimensions

uncoated

enter carbide K10 d1 s l r

grade

왔
21
CPGW 040102 FN W85 09000.05.. % .187 .063 .189 .008
CPGW 040104 FN W85 09000.06.. % .187 .063 .189 .016

CPGW 060202 FN W85 18000.17.. % .250 .094 .254 .008

CPGW 060204 FN W85 18000.18.. % .250 .094 .254 .016

CPGW 09T304 FN W85 32000.26.. % .375 .156 .380 .016

CPGW 09T308 FN W85 32000.27.. % .375 .156 .380 .031

CPGW 120404 FN W85 44000.32.. % .500 .187 .508 .016

CPGW 120408 FN W85 44000.33.. % .500 .187 .508 .031
Order example: Description CPGW 040102 FN / Carbide grade K 10 / Order No.: W85 09000.0521
l
Inserts W 85
(CPGW) r 11°
Neutral chip guide step
d1

ISO Description Order No. Cutting material Dimensions

enter carbide PCD tipped d1 s l r

grade

왔
55
CPGW 060204 FN W85 18000.16.. % .250 .094 .118 .016

CPGW 09T304 FN W85 32000.21.. % .375 .156 .118 .016

CPGW 09T308 FN W85 32000.22.. % .375 .156 .118 .031

CPGW 120404 FN W85 44000.27.. % .500 .187 .118 .016

CPGW 120408 FN W85 44000.28.. % .500 .187 .118 .031
Cast iron, graphite cast iron Order example:
Non-ferrous metals % Availability: for delivery see Description CPGW 060204 FN
Stainless steel current price and stock list Cutting material PKD
Mild steel / tool steel # To be discontinued Order No.: W85 18000.1655
71
 Inserts

Q 09 (SPGW / SPMT)
Inserts Q 09
11°
(SPGW)

d2

r
d1 s

ISO Description Order No. Carbide grades Dimensions

uncoated

enter carbide P25M K20 d1 s d2 r

code

왔
03 22
SPGW 050204 Q09 13000.01.. % % .219 .094 .110 .016

Order example: Description SPGW 050204 / Carbide grade K 20 / Order No.: Q09 13000.0422

Inserts Q 09
11°
(SPMT)

d2

r
d1 s

ISO Description Order No. Carbide grade Dimensions

PVD
uncoated coated

enter carbide P25M K20 BK87 d1 s d2 r

code

왔
03 22 87
SPMT 060304 Q09 18000.17.. % % % .250 .125 .110 .016

Cast iron, graphite cast iron Order example:

Non-ferrous metals % Availability: for delivery see Description SPMT 060304
Stainless steel current price and stock list Carbide grade BK 87
Mild steel / tool steel # To be discontinued Order No.: Q09 18000.1787
72
Q 09 (SEHW / SEHT)
Inserts Q 09
(SEHW / SEHT)
20°
⭋ .217
45°

Important note! d1 s
The cutting edge on Cermet .106
inserts is honed.
ISO Description Order No. Carbide grades HSS Silicon Cermet Dimensions
CVD PVD nitride
uncoated coated coated coated uncoated

enter carbide P25M P40 K20 BK4 BK85 BK87 BK89 SK44 CK37 d1 s r
grade

왔
03 04 22 64 85 87 89 44 37
SEHW 1204AFTN Q09 44000.13.. % # % % # .500 .187

Without blending radius

between main and
secondary edge,
land on main edge

SEHW 1204AFFN-V Q09 44000.02.. % % .500 .187 .039

r SEHW 1204AFFN-V Q09 44000.14.. % .500 .187 .039

Blending radius between

main and secondary adge,
sharp edged

SEHW 1204AFTN-V Q09 44000.15.. % # % % .500 .187 .039

r

Blending radius between

main and secondary edge,
land on main edge

SEHW 1204AFTN-20V Q09 44000.03.. % .500 .187 .039

r
Blending radius between
main and secondary edge,
both with land

SEHW 1204AFTN-20 Q09 44000.04.. % # .500 .187 .000

SEHW 1506AFTN-20 Q09 53000.16.. % % % .625 .250 .000
Without blending radius,
main and land on secondary
edge

SEHT 1204AFEN Q09 44000.23.. % .500 .187 .039

Cast iron, graphite cast iron Order example:

Non-ferrous metals % Availability: for delivery see Description SEHW 1204AFTN-V
Stainless steel current price and stock list Carbide grade P 25 M
Mild steel / tool steel # To be discontinued Order No.: Q09 44000.1503
73
 Inserts

Q 12 (TCAA / TNAA / TCAX / TNAX)

Inserts Q 12 TCAA / TNAA TCAX / TNAX
b

d2 d2

d1 d1
s s

ISO Description Order No. Carbide grades Dimensions

uncoated coated
for
milling
enter carbide P25M K20 BK85 d1 s d2 width b H13 a
code
03 22 85 in
왔

TCAA 1102ZZ R Q12 18000.01.. % % % .250 .102 .110 .157-.197

TCAA 1102ZZ L Q12 18000.02.. % % % .250 .102 .110 .157-.197

TCAA 1103ZZ R Q12 18000.03.. % % % .250 .125 .110 .236

TCAA 1103ZZ L Q12 18000.04.. % % % .250 .125 .110 .236

TNAA 16T3ZZ R Q12 32000.05.. % % % .375 .156 .173 .276

TNAA 16T3ZZ L Q12 32000.06.. % % % .375 .156 .173 .276

TNAA 1604ZZ N Q12 32000.07.. % % % .375 .187 .173 .315-.354

TNAA 1604ZZ R Q12 32000.52.. % % % .375 .187 .173 .315-.354
TNAA 1604ZZ L Q12 32000.53.. % % % .375 .187 .173 .315-.354

TNAA 1606ZZ R Q12 32000.08.. % % % .375 .252 .173 .394-.472

TNAA 1606ZZ L Q12 32000.09.. % % % .375 .252 .173 .394-.472

TCAX 1103ZZ R-160 Q12 18000.11.. % % .250 .125 .110 .063 .055
TCAX 1103ZZ R-185 Q12 18000.12.. % % .250 .125 .110 .073 .067
TCAX 1103ZZ R-215 Q12 18000.13.. % % .250 .125 .110 .085 .079
TCAX 1103ZZ R-265 Q12 18000.14.. % % .250 .125 .110 .104 .087

TNAX 1604ZZ R-265 Q12 32000.18.. % % .375 .187 .134 .104 .087
TNAX 1604ZZ R-315 Q12 32000.19.. % % .375 .187 .134 .124 .087
TNAX 1604ZZ R-415 Q12 32000.20.. % % .375 .187 .134 .163 .126

TNAX 2206ZZ R-415 Q12 44000.21.. % % .500 .252 .217 .217 .126
TNAX 2206ZZ R-465 Q12 44000.22.. % % .500 .252 .217 .217 .181
TNAX 2206ZZ R-515 Q12 44000.23.. % % .500 .252 .217 .217 .185
TNAX 2206ZZ R-565 Q12 44000.24.. % % .500 .252 .217 .217 .220
TNAX 2206ZZ R-620 Q12 44000.25.. % % .500 .252 .217 .217 .228

Cast iron, graphite cast iron Order example:

Non-ferrous metals % Availability: for delivery see Description TCAA 1102ZZ R
Stainless steel current price and stock list Carbide grade P 25 M
Mild steel / tool steel # To be discontinued Order No.: Q12 18000.0103
74
Q 12 (TPAX / TCAX / TNAX)
(TPAX

Inserts Q 12 b
(TPAX / TCAX / TNAX)
a
Dimensions a and b apply for
the resulting workpiece profile ε
d2 Order example:
Description TPAX 1103ZZ R-110F
Carbide grade P 25 M
d1 s
Order No.: Q12 18000.1003
ISO Description Order No. Carbide grades Dimensions

uncoated coated

enter carbide P25M K20 BK85 d1 s d2 b H13 a ε

grade
land
왔
03 22 85
TPAX 1103ZZ R-110F Q12 18000.10.. % % % .250 .125 .114 .043 .035 ⫺
TNAX 1103ZZ R-160F Q12 18000.31.. % % % .250 .125 .114 .063 .039 45°
TNAX 1103ZZ R-185F Q12 18000.32.. % % % .250 .125 .114 .073 .049 45°
TNAX 1103ZZ R-215F Q12 18000.33.. % % % .250 .125 .114 .085 .059 45°
TNAX 1103ZZ R-265F Q12 18000.34.. % % % .250 .125 .114 .104 .069 45°
TCAX 16T3ZZ R-110F Q12 32000.15.. % % % .375 .156 .154 .043 .035 ⫺
TCAX 16T3ZZ R-130F Q12 32000.16.. % % % .375 .156 .154 .051 .051 ⫺
TCAX 16T3ZZ R-160F Q12 32000.17.. % % % .375 .156 .154 .063 .055 ⫺
TNAX 1604ZZ R-265F Q12 32000.41.. % % % .375 .187 .173 .104 .069 45°
TNAX 1604ZZ R-315F Q12 32000.42.. % % % .375 .187 .173 .124 .069 45°
TNAX 1604ZZ R-415F Q12 32000.43.. % % % .375 .187 .173 .163 .098 45°
TNAX 2206ZZ R-415F Q12 44000.84.. % % % .500 .252 .217 .163 .098 45°
TNAX 2206ZZ R-465F Q12 44000.85.. % % % .500 .252 .217 .183 .134 45°
TNAX 2206ZZ R-515F Q12 44000.86.. % % .500 .252 .217 .203 .157 45°

Inserts Q 12 b
(TNAX)

a
ε
d2

d1 s

ISO Description Order No. Carbide grades Dimensions

uncoated coated

enter carbide P25M K20 BK85 d1 s d2 b H13 a ε

grade
land
왔
03 22 85
TNAX 1103ZZ R-265F Q12 18000.36.. % % % .250 .125 .114 .104 .069 45°
TNAX 1604ZZ R-415F Q12 32000.38.. % % % .375 .187 .173 .163 .098 45°
TNAX 2206ZZ R-515F Q12 44000.87.. % % % .500 .252 .217 .203 .157 45°
Cast iron, graphite cast iron Order example:
Non-ferrous metals % Availability: for delivery see Description TNAX 2206ZZ R-515F
Stainless steel current price and stock list Carbide grade P 25 M
Mild steel / tool steel # To be discontinued Order No.: Q12 44000.8703
75
 Inserts

Q 15 (CPMT / CPMW) / Q 21 (EDHQ)

Inserts Q 15 CPMT CPMW
11° 11°

d2 d2

r r
d1 s d1 s

ISO Description Order No. Carbide grades Dimensions

uncoated coated

enter carbide P25M P40 K20 BK85 BK87 d1 s d2 r

code

왔
03 04 22 85 87
CPMT 060304 Q15 18000.01.. % % % % .250 .125 .110 .016
CPMW 060304 Q15 18000.02.. % .250 .125 .110 .016

CPMW 09T308 Q15 32000.03.. % .375 .156 .169 .031

CPMT 09T308 Q15 32000.04.. % % % % .375 .156 .169 .031

Order example: Description CPMW 09T308 / Carbide grade BK 87 / Order No.: Q15 32000.0487

Cast iron, graphite cast iron Order example:

Non-ferrous metals % Availability: for delivery see Description EDHQ 0904 L
Stainless steel current price and stock list Carbide grade K 20
Mild steel / tool steel # To be discontinued Order No.: Q21 32000.0622
76
Q 36 (APKT)
Inserts Q 36 a
(APKT) r

d2
85°

Important note!
The cutting edge on Cermet d1 s
inserts is honed.

ISO Description Order No. Carbide grades Cermet Dimensions

uncoated coated uncoated

enter carbide P25M K10 BK4 BK68 BK74 BK78 BK84 BK80 CK37 d1 s d2 a r
grade

왔
03 21 64 68 74 78 84 80 37
APKT 1003PD-R Q36 18000.01.. % % % % % % % % % .264 .138 .110 .354 .014
APKT 1203PD-R Q36 24000.02.. % % % % % % % % % .315 .150 .138 .433 .024
APKT 1605PD-R Q36 38000.07.. % % % % % % % .437 .207 .177 .591 .031

Order example: Description APKT 1203PD-R / Carbide grade BK 4 / Order No.: Q36 24000.0264

Inserts Q 36 a
(APKT) r

85° d2

d1 s

ISO Description Order No. Carbide grades Dimensions

uncoated coated

enter carbide P25M K10 BK4 d1 s d2 a r

grade

왔
03 21 64
APKT 120316PD-R Q36 24000.04.. % % % .315 .150 .138 .433 .063
APKT 120324PD-R Q36 24000.05.. % % % .315 .150 .138 .433 .094
APKT 120332PD-R Q36 24000.06.. % % % .315 .150 .138 .433 .126

Cast iron, graphite cast iron Order example:

Non-ferrous metals % Availability: for delivery see Description APKT 120316PD-R
Stainless steel current price and stock list Carbide grade BK 4
Mild steel / tool steel # To be discontinued Order No.: Q36 24000.0464
77
 Numerical Coding for Inserts

Nomenclature for Inserts

Code Shape Code Relief angle Tolerance Code Type

A
R N
m no chipbreaker, with hole
m
0°
M
S B
d1 d1 s
chipbreaker on one side,
with hole
5°
m s d G
T C
inch mm inch mm inch mm chipbreaker both sides,
7° with hole
E ± .0010 ± 0.025 ± .0010 ± 0.025 ± .0010 ± 0.025
80° / R
C O
100° G ± .0010 ± 0.025 ± .0005 ± 0.13 ± .0010 ± 0.025
chipbreaker on one side,
from ±.003 from ±0.08 ± .0005 ± 0.13 from± .002 from± 0.05 no hole
8° M
to ±.0071) to ±0.18(1) to ±.005(1) to ±0.13(1) B
E 75° P
U from ±.005 from ±0.13 ± .0005 ± 0.13 from ±.003 from ±0.08
to ± .015(1) to ± 0.38(1) to ±.010(1) to ±0.25(1) no chipbreaker, counter-
sunk hole on one side
11°
쏗 Tolerance T, H
D 55°
inscribed at m at d1 chipbreaker on one side
circle d1 Class M Class U Class M Class U with countersunk hole
inch mm inch (mm) inch (mm) inch (mm) inch (mm)
P
V
35° 1/4 6.35 ±.003 (±0.08) ±.005 (±0.13) ±.002 (±0.05) ±.003 (±0.08)
3/8 9.52 ±.003 (±0.08) ±.005 (±0.13) ±.002 (±0.05) ±.003 (±0.08) Neg/Pos. one or two
1/2 12.70 ±.005 (±0.13) ±.008 (±0.20) ±.003 (±0.08) ±.005 (±0.13) sides, with hole
5/8 15.87 ±.006 (±0.15) ±.010 (±0.27) ±.004 (±0.10) ±.007 (±0.18) Z, X Special design
W 80°
3/4 19.05 ±.006 (±0.15) ±.010 (±0.27) ±.004 (±0.10) ±.007 (±0.18)
1 25.40 ±.007 (±0.18) ±.015 (±0.38) ±.005 (±0.13) ±.010 (±0.25)

ANSI Code

W N M G 4 3 2 F L —
F 1
W N M G 0 8 0 4 0 8 F L —
F 1
ISO Code
Insert size Code Thickness Code Corner Code Insert edge Code Cutting Chipfomer code
radius direction of
insert
s
R Roughing
l l l l l F
s r sharp M Medium
Inch IC(d1) Metric cutting edge length(I)
(l) inch mm C D R S T V W F Finishing
s
1.2 5/32 3.97 02 R
1.8 7/32 5.56 05 09 inch metric inch metric inch metric inch metric – R1 – F1
2 1/4 6.35 06 07 11 11 03 E
1 01 1/16 1.59 0.5 02 .008 0.2 honed R.H. – R2 – F2
2.5 5/16 7.94 13
- .315 8.00 08 1.5 02 3/32 2.38 1 04 1/64 0.4 – R4 – F3
3 3/8 9.52 09 11 09 16 16 06 L
- .394 10.00 10 2 03 1/8 3.18 2 08 1/32 0.8 – M1 – F4
- .472 12.00 12 T
2.5 T3 5/32 3.97 3 12 3/64 1.2 chamfered L.H. – M2 – F5
4 1/2 12.70 12 15 12 22 22 08
5 5/8 15.88 16 15 27 (negative) – M3 – F6
3 04 3/16 4.76 4 16 1/16 1.6
- .630 16.00 16 N
6 3/4 19.05 19 19 33 13 4 06 1/4 6.35 5 20 5/64 2.0 – F8
- .787 20.00 20 S KUB Quatron
5 07 5/16 7.94 6 24 3/32 2.4 chamfered +
- .984 25.00 25 R.H. and
8 1.000 25.40 25 honed L.H. – 13 – 01
78
KOMET Code for Inserts W 83 – W 97
Code Secondary group number
Insert geometry
ISO basic forms

83 S ... square

84 T ... triangular

85 C ... rhomboid
80°

86 D ... rhomboid
55°

89 V ... rhomboid 35°

90 W ... hexagonal
80°

95 R ... round

97 threaded

Code Main category number for

W Standard Insert

W 8 3 4 4 0 0 0 䊉
0 6 7 6

Code Inscribed d1 d1 d1 d1 d1 d1 Serial number Modification code Serial number Code Cutting
circle d1 material
inch metric quality

13 7/32 5.56 䊉 00 00 03 P 25 M
0
04 P 40
01 01
18 1/4 6.35 䊉 䊉 䊉 1 21 K 10
02 02 39 CK 39
23 .281 7.15 䊉 2
03 03 44 SK 44
3 62 BK 62
32 3/8 9.52 䊉 䊉 䊉 䊉 04 04
64 BK 4
05 4 05 68 BK 68
34 .394 10.00 䊉
06 06 75 BK 75
5
38 7/16 11.10 76 BK 76
07 07
6 77 BK 77
44 1/2 12.70 䊉 䊉 䊉 䊉 08 08 78 BK 78
7
09 09 80 BK 80
53 5/8 15.88 䊉
8 85 BK 85
: :
87 BK 87
62 3/4 19.05 䊉
99 9 99 89 BK 89
79
 Inserts

W 83 (SNMA / SNMM / SNMG / SCMT)

Inserts W 83 SNMA SNMM ...–R2 ...–M3
(SNMA / SNMM / SNMG)

r
d1 = l s

ISO Description Order No. Carbide grades coated Dimensions

(ANSI Description)

BK75 BK75 BK76 BK76

enter carbide 75 75 76 76 depth of
code cutting cutting cutting cutting feedrate cut d1 l s r
speed speed speed speed
(ft/min) (ft/min) (ft/min) (ft/min) (in) (in)
왔

R SNMA 120408 (SNMA 432) W83 44000.01.. 390-520 max .020 .059 - .197 .500 .500 .187 .031
R SNMM 120408 (SNMM 432) W83 44000.03.. 390-750 330-490 490-820 390-520 .008 - .020 .059 - .197 .500 .500 .187 .031
R SNMM 120412 (SNMM 433) W83 44000.04.. 490-820 390-520 .012 - .024 .059 - .197 .500 .500 .187 .047
R SNMG 120408-R2 (SNMG 432-R2) W83 44000.05.. 490-820 660-980 390-520 .008 - .018 .039 - .197 .500 .500 .187 .031
M SNMG 120408-M3 (SNMG 432-M3) W83 44000.06.. 490-820 330-590 660-980 .005 - .016 .039 - .157 .500 .500 .187 .031
R SNMA 190616 (SNMA 644) W83 62000.01.. 390-520 max .024 .098 - .394 .750 .750 .250 .063
R SNMM 190616-R4 (SNMM 644-R4) W83 62000.02.. 260-620 260-590 390-890 200-490 .031 - .055 .276 - .472 .750 .750 .250 .063
R SNMG 190616 (SNMG 644) W83 62000.03.. 490-820 330-720 490-820 390-520 .012 - .024 .098 - .315 .750 .750 .250 .063
R SNMG 190612 (SNMG 643) W83 62000.04.. 490-820 330-720 340-820 390-520 .012 - .024 .098 - .315 .750 .750 .250 .047
Order example: Description SNMG120408-M3 / Carbide grade BK 76 / Order No.: W83 44000.0676

Inserts W 83 ...–F3 ...–F4 ...–F5

(SCMT)
7°

r
d1 = l s

ISO Description Order No. Carbide grades coated Dimensions

(ANSI Description)

BK75 BK75 BK76 BK76

enter carbide 75 75 76 76 depth of
grade cutting cutting cutting cutting feedrate cut d1 l s r
speed speed speed speed
(ft/min) (ft/min) (ft/min) (ft/min) (in) (in)
왔

F SCMT09T304-F3 (SCMT32.51-F3) W83 32000.01.. 590-920 820-1080 390-590 .005 - .012 .039 - .138 .375 .375 .156 .016
F SCMT09T308-F4 (SCMT32.52-F4) W83 32000.02.. 590-920 430-720 820-1080 390-590 .006 - .016 .039 - .157 .375 .375 .156 .031

F SCMT120404-F3 (SCMT431-F3) W83 44000.08.. 590-920 820-1080 390-590 .005 - .012 .039 - .157 .500 .500 .187 .016
F SCMT120408-F5 (SCMT432-F5) W83 44000.09.. 590-920 430-720 820-1080 390-590 .008 - .020 .039 - .197 .500 .500 .187 .031

Order example: Description SCMT120408-F5 / Carbide grade BK 76 / Order No.: W83 44000.0976
Stainless steel, carbon steel with low tensile strength R ⫽ Roughing
Alloy steel, carbon steel with high tensile strength M ⫽ Medium
Cast iron F ⫽ Finishing
80
W 83 (SOEX) KUB QuatronTM
Inserts W 83 ...–01 ...–13
(SOEX)
8°

r
d1 = l s

ISO Description Order No. Carbide grades Dimensions

CVD PVD
coated coated

enter carbide BK1 BK69 BK74 BK79 BK84 d1 s l r

grade

왔
61 69 74 79 84
SOEX 050204-01 W83 13000.01.. % % % % % .219 .094 .219 .016
SOEX 050204-13 W83 13000.02.. % % % % .219 .094 .219 .016

SOEX 060306-01 W83 18000.09.. % % % % % .250 .125 .250 .024

SOEX 060306-13 W83 18000.10.. % % % % .250 .125 .250 .024

SOEX 07T308-01 W83 23000.01.. % % % % % .313 .141 .313 .031

SOEX 07T308-13 W83 23000.02.. % % % % .313 .141 .313 .031

SOEX 090408-01 W83 32000.15.. % % % % % .375 .172 .375 .031

SOEX 090408-13 W83 32000.17.. % % % % .375 .172 .375 .031

SOEX 120508-01 W83 44000.18.. % % % % % .500 .203 .500 .031

SOEX 120508-13 W83 44000.19.. % % % % .500 .203 .500 .031

Cast iron, graphite cast iron Order example:

Non-ferrous metals % Availability: for delivery see Description SOEX 050204-01
Stainless steel current price and stock list Carbide grade BK 1
Mild steel / tool steel # To be discontinued Order No.: W83 13000.0161
81
 Inserts

W 84 (TNMG)
Inserts W 84 d1 ...–R2 ...–M3 ...–F1
(TNMG) r

ISO Description Order No. Carbide grades coated Dimensions

(ANSI Description)

BK75 BK75 BK76 BK85 BK85

enter carbide 75 75 76 85 85 depth of
code cutting cutting cutting cutting cutting feedrate cut d1 l s r
speed speed speed speed speed
(ft/min) (ft/min) (ft/min) (ft/min) (ft/min) (in) (in)
왔

R TNMG160412-R2 (TNMG333-R2) W84 32000.01.. 490-820 .007 - .014 .039 - .138 .375 .650 .187 .047

M TNMG160404-M3 (TNMG331-M3) W84 32000.04.. 490-820 330-590 660-980 .005 - .012 .039 - .118 .375 .650 .187 .016
M TNMG160408-M3 (TNMG332-M3) W84 32000.05.. 490-820 330-590 660-980 .005 - .012 .039 - .118 .375 .650 .187 .031

F TNMG160404-F1 (TNMG331-F1) W84 32000.06.. 660-920 490-850 .002 - .010 .016 - .079 .375 .650 .187 .016

Order example: Description TNMG160404-F1 / Carbide grade BK 85 / Order No.: W84 32000.0685
Stainless steel, carbon steel with low tensile strength R ⫽ Roughing
Alloy steel, carbon steel with high tensile strength M ⫽ Medium
Cast iron F ⫽ Finishing
82
W 84 (TCMT)
Inserts W 84 d1 ...–F3 ...–F5
(TCMT) r
7°

ISO Description Order No. Carbide grades coated Dimensions

(ANSI Description)

BK75 BK75 BK76 BK76

enter carbide 75 75 76 76 depth of
code cutting cutting cutting cutting feedrate cut d1 l s r
speed speed speed speed
(ft/min) (ft/min) (ft/min) (ft/min) (in) (in)
왔

F TCMT110204-F5 (TCMT21.53-F5) W84 18000.01.. 590-920 430-750 820-1080 .004 - .012 .020 - .118 .250 .409 .094 .016

F TCMT16T304-F3 (TCMT32.51-F3) W84 32000.07.. 590-920 820-1080 390-590 .007 - .016 .039 - .157 .375 .650 .156 .016

Stainless steel, carbon steel with low tensile strength R ⫽ Roughing

Alloy steel, carbon steel with high tensile strength M ⫽ Medium
Cast iron F ⫽ Finishing
83
 Inserts

W 85 (CNMA / CNMM / CNMG / CNMZ)

Inserts W 85 I
CNMA ...–R1* ...–M2 ...–F2 ...–F6
r
(CNMA / CNMM / CNMG / CNMZ)

d1
* for
interrupted
s cut only

ISO Description Order No. Carbide grades coated Dimensions

(ANSI Description)

BK62 BK75 BK75 BK76 BK76 BK85 BK85

enter carbide 62 75 75 76 76 85 85 depth of
code cutting cutting cutting cutting cutting cutting cutting feedrate cut d1 l s r
speed speed speed speed speed speed speed
(ft/min) (ft/min) (ft/min) (ft/min) (ft/min) (ft/min) (ft/min) (in) (in)
왔

R CNMA120408 (CNMA432) W85 44000.01.. 460-590 max .020 .039 - .157 .500 .508 .187 .031
R CNMA120412 (CNMA433) W85 44000.02.. 460-590 max .024 .059 - .177 .500 .508 .187 .047

R CNMM120408-R1* (CNMM432-R1*) W85 44000.03.. 390-750 330-490 .010 - .020 .059 - .236 .500 .508 .187 .031
R CNMM120412-R1* (CNMM433-R1*) W85 44000.04.. 390-750 330-490 .010 - .020 .059 - .236 .500 .508 .187 .047

M CNMG120404-M2 (CNMG431-M2) W85 44000.08.. 490-820 330-590 .006 - .012 .039 - .157 .500 .508 .187 .016
M CNMG120408-M2 (CNMG432-M2) W85 44000.09.. 490-820 330-590 .006 - .012 .039 - .157 .500 .508 .187 .031
M CNMG120412-M2 (CNMG433-M2) W85 44000.10.. 490-820 330-590 .007 - .016 .059 - .157 .500 .508 .187 .047

F CNMG120404-F2 (CNMG431-F2) W85 44000.14.. 590-920 430-720 820-1080 390-590 .003 - .010 .016 - .138 .500 .508 .187 .016
F CNMG120408-F2 (CNMG432-F2) W85 44000.15.. 590-920 430-720 820-1080 390-590 .003 - .010 .024 - .138 .500 .508 .187 .031

F CNMZ120404 FR-F6 (CNMZ431 FR-F6) W85 44000.16.. 660-920 490-850 .005 - .008 .016 - .138 .500 .508 .187 .016
F CNMZ120404 FL-F6 (CNMZ431 FL-F6) W85 44000.17.. 660-920 490-850 .005 - .008 .016 - .138 .500 .508 .187 .016

R CNMG160612 (CNMG543) W85 53000.01.. 460-590 .012 - .024 .079 - .276 .626 .630 .250 .047
R CNMM160612-R4 (CNMM543-R4) W85 53000.02.. 260-620 260-590 390-890 200-490 .024 - .043 .217 - .374 .626 .630 .250 .047
R CNMG160612-R2 (CNMG543-R2) W85 53000.03.. 490-820 330-720 660-980 460-820 .011 - .020 .079 - .315 .626 .630 .250 .047

Order example: Description CNMZ120404-M2 / Carbide grade BK 75 / Order No.: W85 44000.0875
Stainless steel, carbon steel with low tensile strength R ⫽ Roughing
Alloy steel, carbon steel with high tensile strength M ⫽ Medium
Cast iron F ⫽ Finishing
84
W 85 (CCMT)
Inserts W 85 I
CCMT ...–F3 ...–F9
r 7°
(CCMT)

d1

ISO Description Order No. Carbide grades coated Cermet uncoated Cermet coated Dimensions
(ANSI Description)

BK75 BK75 BK76 BK76 CK32 CK32 CK32 CK39 CK39

enter carbide 75 75 76 76 32 32 32 39 39 depth of
code cutting cutting cutting cutting cutting cutting cutting cutting cutting feedrate cut d1 l s r
speed speed speed speed speed speed speed speed speed
(ft/min) (ft/min) (ft/min) (ft/min) (ft/min) (ft/min) (ft/min) (ft/min) (ft/min) (in) (in)
왔

F CCMT060202-F3 (CCMT21.50.5-F3) W85 18000.01.. 590-920 820-1080 .005 - .009 .020 - .079 .250 .254 .094 .008
F CCMT060204-F3 (CCMT21.51-F3) W85 18000.02.. 590-920 820-1080 390-590 .006 - .010 .020 - .098 .250 .254 .094 .016

F CCMT060202 EN-F9 (CCMT21.50.5 EN-F9) W85 18000.19.. 260-790 330-590 460-1150 430-790 520-1150 .002 - .010 .002 - .079 .250 .254 .094 .008
F CCMT060204 EN-F9 (CCMT21.51 EN-F9) W85 18000.20.. 260-790 330-590 330-890 390-750 460-1150 430-790 520-1150 .002 - .010 .002 - .079 .250 .254 .094 .016

F CCMT09T304 (CCMT32.51) W85 32000.02.. 490-920 490-920 .005 - .010 .020 - .098 .375 .380 .156 .016
F CCMT09T304-F3 (CCMT32.51-F3) W85 32000.03.. 820-1080 390-590 .006 - .010 .020 - .098 .375 .380 .156 .016
F CCMT09T308 (CCMT32.52) W85 32000.04.. 490-920 490-920 .005 - .010 .031 - .118 .375 .380 .156 .031
F CCMT09T308-F3 (CCMT32.52-F3) W85 32000.05.. 820-1080 390-590 .006 - .010 .020 - .098 .375 .380 .156 .031

F CCMT09T304 EN-F9 (CCMT32.51 EN-F9) W85 32000.28.. 260-790 330-590 330-890 390-750 460-1150 430-790 520-1150 .002 - .010 .002 - .098 .375 .380 .156 .016
F CCMT09T308 EN-F9 (CCMT32.52 EN-F9) W85 32000.29.. 260-790 330-590 330-890 390-750 460-1150 430-790 520-1150 .002 - .010 .002 - .098 .375 .380 .156 .031

F CCMT120408 EN-F9 (CCMT432 EN-F9) W85 44000.34.. 260-790 330-590 330-890 390-750 460-1150 430-790 520-1150 .002 - .010 .002 - .098 .500 .508 .187 .031

Order example: Description CCMT09T308-F3 / Carbide grade BK 76 / Order No.: W85 32000.0576
Stainless steel, carbon steel with low tensile strength R ⫽ Roughing
Alloy steel, carbon steel with high tensile strength M ⫽ Medium
Cast iron F ⫽ Finishing
85
 Inserts

W 86 (DNMG)
Inserts W 86 r
I
...–R2 ...–M2 ...–F2
(DNMG)

d1

ISO Description Order No. Carbide grades coated Cermet coated Dimensions
(ANSI Description)

BK75 BK75 BK76 BK76 CK39 CK39

enter carbide 75 75 76 76 39 39 depth of
code cutting cutting cutting cutting cutting cutting feedrate cut d1 l s r
speed speed speed speed speed speed
(ft/min) (ft/min) (ft/min) (ft/min) (ft/min) (ft/min) (in) (in)
왔

R DNMG110408-R2 (DNMG332-R2) W86 32000.01.. 490-820 660-980 390-520 .007 - .016 .394 - .157 .375 .457 .187 .031
R DNMG110412-R2 (DNMG333-R2) W86 32000.02.. 490-820 660-980 390-520 .008 - .016 .059 - .177 .375 .457 .187 .047

R DNMG150608-R2 (DNMG442-R2) W86 44000.01.. 490-820 660-980 390-520 .007 - .016 .039 - .157 .500 .610 .250 .031
R DNMG150612-R2 (DNMG443-R2) W86 44000.02.. 490-820 660-980 390-520 .008 - .018 .059 - .197 .500 .610 .250 .047

M DNMG110404-M2(DNMG331-M2) W86 32000.03.. 490-820 330-590 660-980 .005 - .012 .039 - .138 .375 .457 .187 .016
M DNMG110408-M2(DNMG332-M2) W86 32000.04.. 490-820 330-590 660-980 .005 - .012 .039 - .138 .375 .457 .187 .031

M DNMG150608-M2(DNMG442-M2) W86 44000.03.. 490-820 330-590 660-980 .005 - .012 .039 - .138 .500 .610 .250 .031

F DNMG110402-F2 (DNMG330.5-F2) W86 32000.06.. 660-980 490-920 .003 - .010 .016 - .098 .375 .457 .187 .008
F DNMG110404-F2 (DNMG331-F2) W86 32000.07.. 590-920 430-720 820-1080 390-590 660-980 490-920 .003 - .012 .031 - .118 .375 .457 .187 .016
F DNMG110408-F2 (DNMG332-F2) W86 32000.08.. 590-920 430-720 820-1080 390-590 660-980 490-920 .003 - .012 .039 - .138 .375 .457 .187 .031

Order example: Description DNMG110408-F2 / Carbide grade BK 75 / Order No.: W86 32000.0875
Stainless steel, carbon steel with low tensile strength R ⫽ Roughing
Alloy steel, carbon steel with high tensile strength M ⫽ Medium
Cast iron F ⫽ Finishing
86
W 86 (DCMT)
Inserts W 86 r
I
DCMT ...–F3
(DCMT) 7°

d1

Description Order No. Carbide grades coated Cermet coated Dimensions

(ISO Description)

BK75 BK76 BK76 CK39 CK39

enter carbide 75 76 76 39 39
grade
d1 l s r

F DCMT070202 (DCMT21.50.5) W86 18000.01.. 590-920 660-980 490-920 .003 - .008 .020 - .079 .250 .305 .094 .008
F DCMT070204 (DCMT21.51) W86 18000.02.. 590-920 660-980 490-920 .005 - .010 .020 - .098 .250 .305 .094 .016

F DCMT11T302 (DCMT32.50.5) W86 32000.09.. 660-980 490-920 .003 - .008 .020 - .079 .375 .457 .156 .008
F DCMT11T304 (DCMT32.51) W86 32000.10.. 660-980 490-920 .005 - .010 .039 - .098 .375 .457 .156 .016
F DCMT11T308 (DCMT32.52) W86 32000.11.. 660-980 490-920 .375 .457 .156 .031
F DCMT11T304-F3 (DCMT32.51-F3) W86 32000.12.. 590-920 820-1080 390-590 .006 - .009 .039 - .098 .375 .457 .156 .016
F DCMT11T308-F3 (DCMT32.52-F3) W86 32000.13.. 820-1080 390-590 .006 - .012 .059 - .118 .375 .457 .156 .031

Order example: Description DCMT11T308-F3 / Carbide grade BK 75 / Order No.: W86 32000.1375
Stainless steel, carbon steel with low tensile strength R ⫽ Roughing
Alloy steel, carbon steel with high tensile strength M ⫽ Medium
Cast iron F ⫽ Finishing
87
 Inserts

W 89 (VNMG / VNMP / VCMT / VBMT)

Inserts W 89 r ...-F2 VNMG VNMP
l
(VNMG / VNMP)

d1

s
ISO Description Order No. Carbide grades coated Dimensions
(ANSI Description)

BK75 BK75 BK76 BK76

enter carbide 75 75 76 76 depth of
code cutting cutting cutting cutting feedrate cut d1 l s r
speed speed speed speed
(ft/min) (ft/min) (ft/min) (ft/min) (in) (in)
왔

F VNMG 13T304-F2 (VNMG 2.52.51-F2) W89 23000.02.. 590-920 430-720 .003 - .012 .031 - .079 .281 .488 .156 .016
F VNMG 13T308-F2 (VNMG 2.52.52-F2) W89 23000.03.. 590-920 430-720 .003 - .012 .039 - .118 .281 .488 .156 .031

M VNMG 160404 (VNMG 331) W89 32000.01.. 660-980 390-520 .003 - .012 .031 - .118 .375 .654 .187 .016
M VNMG 160408 (VNMG 332) W89 32000.02.. 660-980 390-520 .004 - .012 .039 - .118 .375 .654 .187 .031

F VNMP 160404 (VNMP 331) W89 32000.03.. 820-1150 390-590 .005 - .014 .039 - .138 .375 .654 .187 .016
F VNMP 160408 (VNMP 332) W89 32000.04.. 820-1150 390-590 .006 - .016 .039 - .157 .375 .654 .187 .031
Order example: Description VNMP 160408 / Carbide grade BK 76 / Order No.: W89 32000.0476

Inserts W 89 r ...-F3
l ␣
(VCMT / VBMT)

d1

ISO Description Order No. Carbide grades coated Cermet coated Dimensions
(ANSI Description)

BK75 BK75 BK76 BK76 CK39 CK39

enter carbide 75 75 76 76 39 39 depth of
grade cutting cutting cutting cutting cutting cutting feedrate cut d1 l ␣ s r
speed speed speed speed speed speed
(ft/min) (ft/min) (ft/min) (ft/min) (ft/min) (ft/min) (in) (in)
왔

F VCMT 160404-F3 (VCMT 331-F3) W89 32000.05.. 590-920 430-720 820-1080 390-590 660-980 490-920 .005 - .010 .039 - .197 .375 .654 7° .187 .016
F VCMT 160408-F3 (VCMT 332-F3) W89 32000.06.. 590-920 430-720 820-1080 390-590 660-980 490-920 .005 - .012 .039 - .197 .375 .654 7° .187 .031

F VBMT 160404 (VBMT 331) W89 32000.07.. 260-620 260-590 390-890 200-490 .005 - .014 .039 - .197 .375 .654 5° .187 .016
F VBMT 160408 (VBMT 332) W89 32000.08.. 260-620 260-590 390-890 200-490 .006 - .016 .039 - .197 .375 .654 5° .187 .031

Order example: Description VCMT 160408-F3 / Carbide grade BK 75 / Order No.: W89 32000.0675

Stainless steel, carbon steel with low tensile strength R ⫽ Roughing

Alloy steel, carbon steel with high tensile strength M ⫽ Medium
Cast iron F ⫽ Finishing
88
W 90 (WNMA / WNMG / WNMZ) / W 95 (RCMT)
Inserts W 90 I WNMA ...–R2 ...–R3
r
(WNMA / WNMG / WNMZ)

d1
...–M3 ...–F2 ...–F6

ISO Description Order No. Carbide grades coated Cermet coated Dimensions
(ANSI Description)

BK75 BK75 BK76 BK76 BK76 CK39 CK39

enter carbide 75 75 76 76 76 39 39 depth of
grade cutting cutting cutting cutting cutting cutting cutting feedrate cut d1 l s r
speed speed speed speed speed speed speed
(ft/min) (ft/min) (ft/min) (ft/min) (ft/min) (ft/min) (ft/min) (in) (in)
왔

R WNMA 080412 (WNMA 433) W90 44000.01.. 460-590 max .022 .059 - .157 .500 .343 .187 .047
R WNMG 080408-R2 (WNMG 432-R2) W90 44000.03.. 490-820 660-980 390-520 .006 - .018 .039 - .177 .500 .343 .187 .031
R WNMG 080412-R2 (WNMG 433-R2) W90 44000.04.. 490-820 660-980 390-520 .009 - .020 .059 - .177 .500 .343 .187 .047
R WNMG 080408-R3 (WNMG 432-R3) W90 44000.14.. 390-750 330-490 .010 - .018 .079 - .177 .500 .343 .187 .031
R WNMG 080412-R3 (WNMG 433-R3) W90 44000.15.. 390-750 330-490 .010 - .018 .079 - .177 .500 .343 .187 .047

M WNMG 080404-M3 (WNMG 431-M3) W90 44000.08.. 490-820 330-590 660-980 .005 - .014 .039 - .157 .500 .343 .187 .016
M WNMG 080408-M3 (WNMG 432-M3) W90 44000.09.. 490-820 330-590 660-980 .005 - .014 .039 - .157 .500 .343 .187 .031
M WNMG 080412-M3 (WNMG 433-M3) W90 44000.10.. 490-820 330-590 660-980 .006 - .016 .059 - .177 .500 .343 .187 .047

F WNMG 080404-F2 (WNMG 431-F2) W90 44000.11.. 590-920 430-720 820-1080 390-590 .003 - .010 .016 - .138 .500 .343 .187 .016
F WNMG 080408-F2 (WNMG 432-F2) W90 44000.12.. 590-920 430-720 820-1080 390-590 .003 - .010 .024 - .138 .500 .343 .187 .031
F WNMZ 080404 FL-F6 (WNMG 431 FL-F6) W90 44000.13.. 660-920 490-850 .005 - .012 .016 - .138 .500 .343 .187 .016

Order example: Description WNMG 080408-M3 / Carbide grade BK 75 / Order No.: W90 44000.0975

Inserts W 95
(RCMT) 7°

d1 = l s

ISO Description Order No. Carbide grades coated Dimensions

BK75 BK76 BK76

enter carbide 75 76 76 depth of

code cutting cutting cutting feedrate cut d1 l s
speed speed speed
(ft/min) (ft/min) (ft/min) (in) (in)
왔

F RCMT 10T3MO-F3 W95 34000.01.. 590-920 820-1080 390-590 .012 - .020 .060 - .240 .394 .394 .156

Order example: Description RCMT 10T3MO / Carbide grade BK 75 / Order No.: W95 34000.0175

Stainless steel, carbon steel with low tensile strength R ⫽ Roughing

Alloy steel, carbon steel with high tensile strength M ⫽ Medium
Cast iron F ⫽ Finishing
89
 Inserts

W 97
Inserts W 97
l
for ISO thread, metric 60°, full profile,
external, right-hand

d1

Further thread cutting designs available on request.

ISO Description Order No. Carbide grades coated Pitch Dimensions

BK77 BK77 BK77

enter carbide 77 77 77
grade cutting cutting cutting d1 l
speed speed speed
(ft/min) (ft/min) (ft/min) inch (mm)
왔

16ERM 1.00 ISO W97 32000.01.. 260-590 300-520 230-490 .039 (1.00) .375 .630
16ERM 1.25 ISO W97 32000.02.. 260-590 300-520 230-490 .049 (1.25) .375 .630
external R.H.

16ERM 1.50 ISO W97 32000.03.. 260-590 300-520 230-490 .059 (1.50) .375 .630
16ERM 1.75 ISO W97 32000.04.. 260-590 300-520 230-490 .069 (1.75) .375 .630
16ERM 2.00 ISO W97 32000.05.. 260-590 300-520 230-490 .079 (2.00) .375 .630
16ERM 2.50 ISO W97 32000.06.. 260-590 300-520 230-490 .098 (2.50) .375 .630
16ERM 3.00 ISO W97 32000.07.. 260-590 300-520 230-490 .118 (3.00) .375 .630

16IRM 1.00 ISO W97 32000.08.. 260-590 300-520 230-490 .039 (1.00) .375 .630
16IRM 1.25 ISO W97 32000.09.. 260-590 300-520 230-490 .049 (1.25) .375 .630
internal R.H.

16IRM 1.50 ISO W97 32000.10.. 260-590 300-520 230-490 .059 (1.50) .375 .630
16IRM 1.75 ISO W97 32000.11.. 260-590 300-520 230-490 .069 (1.75) .375 .630
16IRM 2.00 ISO W97 32000.12.. 260-590 300-520 230-490 .079 (2.00) .375 .630
16IRM 2.50 ISO W97 32000.13.. 260-590 300-520 230-490 .098 (2.50) .375 .630
16IRM 3.00 ISO W97 32000.14.. 260-590 300-520 230-490 .118 (3.00) .375 .630

16EL 1.00 ISO W97 32000.15.. 260-590 300-520 230-490 .039 (1.00) .375 .630
16EL 1.25 ISO W97 32000.16.. 260-590 300-520 230-490 .049 (1.25) .375 .630
external L.H.

16EL 1.50 ISO W97 32000.17.. 260-590 300-520 230-490 .059 (1.50) .375 .630
16EL 1.75 ISO W97 32000.18.. 260-590 300-520 230-490 .069 (1.75) .375 .630
16EL 2.00 ISO W97 32000.19.. 260-590 300-520 230-490 .079 (2.00) .375 .630
16EL 2.50 ISO W97 32000.20.. 260-590 300-520 230-490 .098 (2.50) .375 .630
16EL 3.00 ISO W97 32000.21.. 260-590 300-520 230-490 .118 (3.00) .375 .630

16IL 1.00 ISO W97 32000.22.. 260-590 300-520 230-490 .039 (1.00) .375 .630
16IL 1.25 ISO W97 32000.23.. 260-590 300-520 230-490 .049 (1.25) .375 .630
internal L.H.

16IL 1.50 ISO W97 32000.24.. 260-590 300-520 230-490 .059 (1.50) .375 .630
16IL 1.75 ISO W97 32000.25.. 260-590 300-520 230-490 .069 (1.75) .375 .630
16IL 2.00 ISO W97 32000.26.. 260-590 300-520 230-490 .079 (2.00) .375 .630
16IL 2.50 ISO W97 32000.27.. 260-590 300-520 230-490 .098 (2.50) .375 .630
16IL 3.00 ISO W97 32000.28.. 260-590 300-520 230-490 .118 (3.00) .375 .630

Order example: Description 16ERM 1.00 ISO / Carbide grade BK 77 / Order No.: W97 32000.0177

Stainless steel, carbon steel with low tensile strength R ⫽ Roughing

Alloy steel, carbon steel with high tensile strength M ⫽ Medium
Cast iron F ⫽ Finishing
90
Hardware

Insert clamping screws

Inserts W00 / W01 / W28 / W29
(Unisix)
Clamping screw for Insert size Torx wrench
Tx S/M... Tx M... W00 04.. W00 10.. W28 17.. W00 24.. W00 34.. W00 42.. W00 50.. W00 58..
W28 10.. W28 24.. W28 34.. W28 42.. W28 50.. W01 58..
W28 58..
W29 58..

Description Order No. Description Order No.

Tx S/M1.8⫻3.1 N00 56010 쏆 Tx 5 L05 00010

Tx S/M2⫻3.6 N00 56020 쏆* Tx 6 L05 00020
Tx S/M2⫻4.8 N00 56030 쏆 Tx 6 L05 00020
Tx M2.5⫻2.8 N00 55550 쏆* Tx 8 L05 00040
Tx M2.5⫻4 N00 55560 쏆* 쏆* Tx 8 L05 00040
Tx M2.5⫻4.5 N00 55580 쏆 쏆* Tx 8 L05 00040
Tx M2.5⫻6 N00 55570 쏆 Tx 8 L05 00040
Tx M3.5⫻5 N00 55700 쏆 Tx 10 L05 00060
Tx M3.5⫻7.5 N00 55710 쏆 Tx 10 L05 00060
Tx M4.5⫻6 N00 55800 쏆* Tx 15 L05 00070
Tx M4.5⫻7 N00 55810 쏆 쏆 Tx 15 L05 00070
Tx M4.5⫻9 N00 55820 쏆* 쏆* Tx 15 L05 00070
Tx M5.5⫻8.5 N00 55890 쏆 Tx 20 L05 00080
Tx M5.5⫻13.5 N00 55900 쏆* Tx 20 L05 00080
Tx S/M5.5⫻11 N00 57540 쏆 Tx 20 L05 00080

Inserts W04 / W05

(Unisix, 6-cutting edges)
Clamping screw for Insert size Hex socket wrench
W04 22.. W04 34.. W04 42.. W04 50.. W04 58..
W05 42.. W05 50..

Description Order No. Size Order No.

(mm)

M3⫻7.8 / 75° N00 55050 쏆 1.5 1859110015

M3.5⫻9.4 / 60° N00 55060 쏆 1.5 1859110015
M3.5⫻11.4 / 60° N00 55070 쏆 1.5 1859110015
M4.5⫻12.4 N00 55100 쏆 2.5 1859110025
M4.5⫻14.5 N00 55110 쏆 2.5 1859110025
M4.5⫻16.4 N00 55120 쏆 2.5 1859110025
M4.5⫻18.7 N00 55130 쏆 2.5 1859110025
M4.5⫻22.5 N00 55140 쏆 2.5 1859110025
M5.5⫻29.2 N00 55180 쏆 3.0 1859110030

Note:
Any clamping screws marked with * can not be used on a general basis for all the insert sizes listed above.
These clamping screws can only be used for special tools (see Tool Catalog).
91
 Hardware

Insert clamping screws

Inserts W01 / W24 / W26 / W27 / W29
Clamping screw for Insert size Torx wrench
W24 12.. W24 20.. W29 04.. W29 10.. W29 18.. W01 24.. W01 34.. W01 42.. W01 50..
W27 12.. W27 20.. W29 24.. W29 34.. W29 42.. W29 50..

Description Order No. Description Order No.

Tx S/M1.8⫻3.5 N00 56050 쏆 Tx 5 L05 00010

Tx S/M2⫻3.6 N00 56020 쏆* Tx 6 L05 00020
Tx S/M2⫻4.3 N00 56040 쏆 Tx 6 L05 00020
Tx S/M2⫻4.8 N00 56030 쏆 Tx 6 L05 00020
Tx S/M2.2⫻5.5 N00 57552 쏆 Tx 6 L05 00020
Tx S2560 N00 56650 쏆 Tx 8 L05 00040
Tx S/M2.5⫻7.4 N00 57510 쏆 Tx 8 L05 00040
Tx S/M3.5⫻7.3 N00 57520 쏆 Tx 10 L05 00060
Tx S/M4.5⫻9 N00 57530 쏆 쏆 Tx 15 L05 00070

Inserts W30 / W32 / W34 / W37 / W57 / W58 / W59

Clamping screw for Insert size Torx wrench
W30 04.. W30 14.. W30 26.. W32 32.. W30 44.. W34 18.. W34 32..
W32 03.. W32 13.. W32 23.. W37 32.. W32 44.. W59 18.. W59 32..
W57 04.. W32 18.. W37 23.. W58 32..
W58 03.. W37 18.. W57 26..
W57 14.. W58 29..
Description Order No. W58 13.. Description Order No.
W58 18..

Tx S/M2⫻3.6 N00 56020 쏆* Tx 6 L05 00020

Tx S/M2⫻4.8 N00 56030 쏆 Tx 6 L05 00020
Tx S/M2.6⫻5.1 N00 56100 쏆* Tx 8 L05 00040
Tx S/M2.6⫻6.1 N00 56110 쏆 Tx 8 L05 00040
Tx S/M2.6⫻4.6 N00 56120 쏆* Tx 8 L05 00040
Tx S/M3.5⫻5.9 N00 56200 쏆 Tx 10 L05 00060
Tx S/M3.5⫻6.9 N00 56210 쏆* Tx 10 L05 00060
Tx S/M4⫻8 N00 56300 쏆 Tx 10 L05 00060
Tx S/M5⫻9.9 N00 56400 쏆 Tx 20 L05 00080
Tx S/M5⫻13.4 N00 56410 쏆* Tx 20 L05 00080
Tx S2560 N00 56650 쏆 Tx 8 L05 00040
Tx S3570 N00 56750 쏆 Tx 15 L05 00070
Tx S3510 N00 56770 쏆 Tx 15 L05 00070

Inserts W60 / W78 / W79

Clamping screw for Insert size Torx wrench
W60 18.. W60 32..
W78 18.. W78 32..
W79 18.. W79 32..

Description Order No. Description Order No.

Tx S2560 N00 56650 쏆 Tx 8 L05 00040

Tx S3570 N00 56750 쏆 Tx 15 L05 00070
Tx S3510 N00 56770 쏆 Tx 15 L05 00070

Note:
Any clamping screws marked with * can not be used on a general basis for all the insert sizes listed above.
92 These clamping screws can only be used for special tools (see Tool Catalog).
Inserts Q09 / Q12 / Q15
Clamping screw for Insert size Torx wrench
Q09 13.. Q09 44.. Q12 18.. Q12 32.. Q12 44.. Q15 18.. Q15 32..
Q09 18.. Q09 53..

Description Order No. Description Order No.

EET.025.035.59 N00 57200 쏆 Tx 8 L05 00040

EET.025.042.59 N00 57210 쏆 Tx 8 L05 00040
EET.025.052.59 N00 57220 쏆 쏆 쏆 Tx 8 L05 00040
EET.030.060.59 N00 57230 쏆 Tx 8 L05 00040
EET.030.070.59 N00 57240 쏆 Tx 8 L05 00040
EET.030.075.59 N00 57250 쏆 Tx 8 L05 00040
EET.035.075.59 N00 57260 쏆 Tx 15 L05 00070
EET.035.085.59 N00 57270 쏆 Tx 15 L05 00070
EET.035.095.59 N00 57280 쏆 Tx 15 L05 00070
EET.045.110.59 N00 57300 쏆 쏆 Tx 20 L05 00080

Tx S/M3⫻6,6 N00 57430 쏆 Tx 8 L05 00040

Inserts Q21 / Q33 / Q36

Clamping screw for Insert size Torx wrench
Q21 24.. Q21 32.. Q21 44.. Q33 18.. Q33 23.. Q36 18.. Q36 24.. Q36 38..

Description Order No. Description Order No.

Tx S2560 N00 56650 쏆 Tx 8 L05 00040

EET.030.070.59 N00 57240 쏆 Tx 8 L05 00040
EET.030.075.59 N00 57250 쏆 쏆 Tx 8 L05 00040
EET.035.075.59 N00 57260 쏆 Tx 15 L05 00070
EET.045.110.59 N00 57300 쏆 Tx 20 L05 00080
Tx S2555 N00 57320 쏆 Tx 8 L05 00040
Tx S3065 N00 57340 쏆 Tx 9 L05 00050
Tx S4010 N00 57410 쏆 Tx 15 L05 00070

93
 Hardware

Clamping screw for ISO inserts W 83 – W 97

Inserts W83 Clamping screw Torx wrench
Order No.
Description
ISO Description Order No. N00 56040 N00 57552 N00 57570 N00 57220 N00 57260 N00 57300 N00 56850 Description Order No.
Tx S/M2⫻4.3 Tx S/M2.2⫻5.5 Tx S/M2.5⫻6.3 EET.025.052.59 EET.035.075.59 EET.045.110.59 Tx S4511
SOEX 05 02 04-01 W83 13000.01.. 쏆 Tx 6 L05 00020
SOEX 05 02 04-13 W83 13000.02.. 쏆 Tx 6 L05 00020
SPGT 06 02 02 FL W83 18000.01.. 쏆 Tx 8 L05 00040
SPGT 06 02 04 FL W83 18000.03.. 쏆 Tx 8 L05 00040
SOEX 06 03 06-01 W83 18000.09.. 쏆 Tx 6 L05 00020
SOEX 06 03 06-13 W83 18000.10.. 쏆 Tx 6 L05 00020
SPGW 06 02 04 FN W83 18000.13.. 쏆 Tx 8 L05 00040
SPGW 06 02 02 FN W83 18000.15.. 쏆 Tx 8 L05 00040
SPGW 06 02 04 FN W83 18000.16.. 쏆 Tx 8 L05 00040
SOEX 07 T3 08-01 W83 23000.01.. 쏆 Tx 8 L05 00040
SOEX 07 T3 08-13 W83 23000.02.. 쏆 Tx 8 L05 00040
SCMT 09 T3 04-F3 W83 32000.01.. 쏆 Tx 15 L05 00070
SCMT 09 T3 08-F4 W83 32000.02.. 쏆 Tx 15 L05 00070
SPGT 09 T3 04 FL W83 32000.03.. 쏆 Tx 15 L05 00070
SPGT 09 T3 08 FL W83 32000.05.. 쏆 Tx 15 L05 00070
SPGW 09 T3 04 FN W83 32000.13.. 쏆 Tx 15 L05 00070
SPGW 09 T3 08 FN W83 32000.14.. 쏆 Tx 15 L05 00070
SOEX 09 04 08-01 W83 32000.15.. 쏆 Tx 15 L05 00070
SOEX 09 04 08-13 W83 32000.17.. 쏆 Tx 15 L05 00070
SPGW 09 T3 04 FN W83 32000.18.. 쏆 Tx 15 L05 00070
SPGW 09 T3 08 FN W83 32000.19.. 쏆 Tx 15 L05 00070
SCMT 12 04 04-F3 W83 44000.08.. 쏆 Tx 20 L05 00080
SCMT 12 04 08-F5 W83 44000.09.. 쏆 Tx 20 L05 00080
SPGT 12 04 04 FL W83 44000.14.. 쏆 Tx 20 L05 00080
SPGT 12 04 08 FL W83 44000.15.. 쏆 Tx 20 L05 00080
SPGW 12 04 04 FN W83 44000.16.. 쏆 Tx 20 L05 00080
SPGW 12 04 08 FN W83 44000.17.. 쏆 Tx 20 L05 00080
SOEX 12 05 08-01 W83 44000.18.. 쏆 Tx 20 L05 00080
SOEX 12 05 08-13 W83 44000.19.. 쏆 Tx 20 L05 00080
SPGW 12 04 04 FN W83 44000.20.. 쏆 Tx 20 L05 00080
SPGW 12 04 08 FN W83 44000.21.. 쏆 Tx 20 L05 00080

Inserts W84 Clamping screw Torx wrench

Order No.
Description
ISO Description Order No. N00 56650 N00 56770 Description Order No.
Tx S2560 Tx S3510
TCMT 11 02 04-F5 W84 18000.01.. 쏆 Tx 7 L05 00030
TCMT 16 T3 04-F3 W84 32000.07.. 쏆 Tx 15 L05 00070

94
Inserts W85 Clamping screw Torx wrench
Order No.
Description
ISO Description Order No. N00 57190 N00 56650 N00 56750 N00 57220 N00 57260 N00 56850 Description Order No.
Tx S2040 Tx S2560 Tx S3570 EET.025.052.59 EET.035.075.59 Tx S4511
CPGT 04 01 02 FL W85 09000.01.. 쏆 Tx 6 L05 00020
CPGT 04 01 04 FL W85 09000.03.. 쏆 Tx 6 L05 00020
CPGW 04 01 02 FN W85 09000.05.. 쏆 Tx 6 L05 00020
CPGW 04 02 02 FN W85 09000.06.. 쏆 Tx 6 L05 00020
CCMT 06 02 02-F3 W85 18000.01.. 쏆 Tx 7 L05 00030
CCMT 06 02 04-F3 W85 18000.02.. 쏆 Tx 7 L05 00030
CPGT 06 02 02 FL W85 18000.06.. 쏆 Tx 8 L05 00040
CPGT 06 02 04 FL W85 18000.08.. 쏆 Tx 8 L05 00040
CPGW 06 02 04 FN W85 18000.16.. 쏆 Tx 8 L05 00040
CPGW 06 02 02 FN W85 18000.17.. 쏆 Tx 8 L05 00040
CPGW 06 02 04 FN W85 18000.18.. 쏆 Tx 8 L05 00040
CCMT 09 T3 04 W85 32000.02.. 쏆 Tx 15 L05 00070
CCMT 09 T3 04-F3 W85 32000.03.. 쏆 Tx 15 L05 00070
CCMT 09 T3 08 W85 32000.04.. 쏆 Tx 15 L05 00070
CCMT 09 T3 08-F3 W85 32000.05.. 쏆 Tx 15 L05 00070
CPGW 09 T3 04 FL W85 32000.19.. 쏆 Tx 15 L05 00070
CPGW 09 T3 08 FL W85 32000.20.. 쏆 Tx 15 L05 00070
CPGW 09 T3 04 FN W85 32000.21.. 쏆 Tx 15 L05 00070
CPGW 09 T3 08 FN W85 32000.22.. 쏆 Tx 15 L05 00070
CPGT 09 T3 04 FL W85 32000.23.. 쏆 Tx 15 L05 00070
CPGT 09 T3 08 FL W85 32000.24.. 쏆 Tx 15 L05 00070
CPGW 09 T3 04 FN W85 32000.26.. 쏆 Tx 15 L05 00070
CPGW 09 T3 08 FN W85 32000.27.. 쏆 Tx 15 L05 00070
CPGW 12 04 04 FL W85 44000.25.. 쏆 Tx 20 L05 00080
CPGW 12 04 08 FL W85 44000.26.. 쏆 Tx 20 L05 00080
CPGW 12 04 04 FN W85 44000.27.. 쏆 Tx 20 L05 00080
CPGW 12 04 08 FN W85 44000.28.. 쏆 Tx 20 L05 00080
CPGT 12 04 04 FL W85 44000.29.. 쏆 Tx 20 L05 00080
CPGT 12 04 08 FL W85 44000.30.. 쏆 Tx 20 L05 00080
CPGW 12 04 04 FN W85 44000.32.. 쏆 Tx 20 L05 00080
CPGW 12 04 08 FN W85 44000.33.. 쏆 Tx 20 L05 00080

Inserts W86 Clamping screw Torx wrench

Order No.
Description
ISO Description Order No. N00 56650 1630100537 Description Order No.
Tx S2560
DCMT 07 02 02 W86 18000.01.. 쏆 Tx 7 L05 00030
DCMT 07 02 04 W86 18000.02.. 쏆 Tx 7 L05 00030
DCMT 11 T3 02 W86 32000.09.. 쏆 Tx 15 L05 00070
DCMT 11 T3 04 W86 32000.10.. 쏆 Tx 15 L05 00070
DCMT 11 T3 08 W86 32000.11.. 쏆 Tx 15 L05 00070
DCMT 11 T3 04-F3 W86 32000.12.. 쏆 Tx 15 L05 00070
DCMT 11 T3 08-F3 W86 32000.13.. 쏆 Tx 15 L05 00070

95
 Hardware

Clamping screw for ISO inserts W 83 – W 97

Inserts W89 Clamping screw Torx wrench
Order No.
Description
ISO Description Order No. 5156074551 1630100537 N00 57270 Description Order No.
EET.035.085.59
VNMG 12 T3 04-F2 W89 23000.02.. 쏆 Tx 9 L05 00050
VNMG 12 T3 08-F2 W89 23000.03.. 쏆 Tx9 L05 00050
VCMT 16 04 04-F3 W89 32000.05.. 쏆 Tx 15 L05 00070
VCMT 16 04 08-F3 W89 32000.06.. 쏆 Tx 15 L05 00070
VBMT 16 04 04 W89 32000.07.. 쏆 Tx 15 L05 00070
VBMT 16 04 08 W89 32000.08.. 쏆 Tx 15 L05 00070

Inserts W95 / W97 Clamping screw Torx wrench

Order No.

ISO Description Order No. 1630100536 1630100016 Description Order No.

RCMT 10 T3 MO-F3 W95 34000.01.. 쏆 Tx 15 L05 00070

16ERM 1.00 ISO W97 32000.01.. 쏆 Tx 10 L05 00060

16ERM 1.25 ISO W97 32000.02.. 쏆 Tx 10 L05 00060
16ERM 1.50 ISO W97 32000.03.. 쏆 Tx 10 L05 00060
16ERM 1.75 ISO W97 32000.04.. 쏆 Tx 10 L05 00060
16ERM 2.00 ISO W97 32000.05.. 쏆 Tx 10 L05 00060
16ERM 2.50 ISO W97 32000.06.. 쏆 Tx 10 L05 00060
16ERM 3.00 ISO W97 32000.07.. 쏆 Tx 10 L05 00060
16IRM 1.00 ISO W97 32000.08.. 쏆 Tx 10 L05 00060
16IRM 1.25 ISO W97 32000.09.. 쏆 Tx 10 L05 00060
16IRM 1.50 ISO W97 32000.10.. 쏆 Tx 10 L05 00060
16IRM 1.75 ISO W97 32000.11.. 쏆 Tx 10 L05 00060
16IRM 2.00 ISO W97 32000.12.. 쏆 Tx 10 L05 00060
16IRM 2.50 ISO W97 32000.13.. 쏆 Tx 10 L05 00060
16IRM 3.00 ISO W97 32000.14.. 쏆 Tx 10 L05 00060
16EL 1.00 ISO W97 32000.15.. 쏆 Tx 10 L05 00060
16EL 1.25 ISO W97 32000.16.. 쏆 Tx 10 L05 00060
16EL 1.50 ISO W97 32000.17.. 쏆 Tx 10 L05 00060
16EL 1.75 ISO W97 32000.18.. 쏆 Tx 10 L05 00060
16EL 2.00 ISO W97 32000.19.. 쏆 Tx 10 L05 00060
16EL 2.50 ISO W97 32000.20.. 쏆 Tx 10 L05 00060
16EL 3.00 ISO W97 32000.21.. 쏆 Tx 10 L05 00060
16IL 1.00 ISO W97 32000.22.. 쏆 Tx 10 L05 00060
16IL 1.25 ISO W97 32000.23.. 쏆 Tx 10 L05 00060
16IL 1.50 ISO W97 32000.24.. 쏆 Tx 10 L05 00060
16IL 1.75 ISO W97 32000.25.. 쏆 Tx 10 L05 00060
16IL 2.00 ISO W97 32000.26.. 쏆 Tx 10 L05 00060
16IL 2.50 ISO W97 32000.27.. 쏆 Tx 10 L05 00060
16IL 3.00 ISO W97 32000.28.. 쏆 Tx 10 L05 00060

96
Permissible starting torques for clamping screws
Thread Torx wrench Starting torque
size (lb·in)

M 1.8 Tx 5 4.43
M2 Tx 6 5.50
M 2.2 Tx 6 5.50
M 2.5 Tx 8 11.40
M3 Tx 9 19.91
M 3.5 Tx 10 24.80
M4 Tx 15 39.80
M 4.5 Tx 15 39.80
M5 Tx 20 53.10
M 5.5 Tx 20 57.53
M6 Tx 25 75.23

97
 Cross reference List

Inserts W00.. to W13..

Order No. Old KOMET New ISO Page Order No. Old KOMET New ISO Page
Description Description Description Description

W0004120.01.. - WOHX 02T001 EL-G12 26 W0042200.02.. P1-8902-L WOHX 08T302 EL-G20 26

W0004420.01.. - WOHX 02T001 ER-G12 27 W0042200.04.. P1-8904-L WOHX 08T304 EL-G20 26
W0004600.01.. - WOHX 02T001 EN 28 W0042360.02.. P1-8002-R WOHX 08T302 ER-G06 27
W0042360.04.. P1-8004-R WOHX 08T304 ER-G06 27
W0010120.02.. P05-201202-L WOHX 03T102 EL-G12 26 W0042360.08.. P1-8008-R WOHX 08T308 ER-G06 27
W0010420.02.. P05-201202-R WOHX 03T102 FR-G12 27 W0042420.02.. P1-8802-R WOHX 08T302 ER-G12 27
W0042420.04.. P1-8804-R WOHX 08T304 ER-G12 27
W0017120.02.. P04-8802-L WOHX 040202 EL-G12 26 W0042500.02.. P1-8902-R WOHX 08T302 ER-G20 27
W0017420.02.. P04-8802-R WOHX 040202 ER-G12 27 W0042500.04.. P1-8904-R WOHX 08T304 ER-G20 27
W0042600.02.. P1-8002-N WOHX 08T302 EN 28
W0024060.02.. P02-8002-L WOHX 050302 EL-G06 26 W0042600.04.. P1-8004-N WOHX 08T304 EN 28
W0024060.04.. P02-8004-L WOHX 050304 EL-G06 26 W0042600.08.. P1-8008-N WOHX 08T308 EN 28
W0024120.02.. P02-8802-L WOHX 050302 EL-G12 26
W0024120.04.. P02-8804-L WOHX 050304 EL-G12 26 W0050060.02.. P2-8002-L WOHX 10T302 EL-G06 26
W0024200.02.. P02-8902-L WOHX 050302 EL G20 26 W0050060.04.. P2-8004-L WOHX 10T304 EL-G06 26
W0024360.02.. P02-8002-R WOHX 050302 ER-G06 27 W0050120.02.. P2-8802-L WOHX 10T302 EL-G12 26
W0024360.04.. P02-8004-R WOHX 050304 ER-G06 27 W0050120.04.. P2-8804-L WOHX 10T304 EL-G12 26
W0024420.02.. P02-8802-R WOHX 050302 ER-G12 27 W0050200.04.. P2-8904-L WOHX 10T304 EL-G20 26
W0024420.04.. P02-8804-R WOHX 050304 ER-G12 27 W0050360.02.. P2-8002-R WOHX 10T302 ER-G06 27
W0024500.02.. P02-8902-R WOHX 050302 FR-G20 27 W0050360.04.. P2-8004-R WOHX 10T304 ER-G06 27
W0024600.04.. P02-8004-N WOHX 050304 EN 28 W0050420.04.. P2-8804-R WOHX 10T304 ER-G12 27
W0024600.08.. P02-8008-N WOHX 050308 EN 28 W0050500.04.. P2-8904-R WOHX 10T304 ER-G20 27
W0050600.04.. P2-8004-N WOHX 10T304 EN 28
W0034060.02.. P01-8002-L WOHX 060302 EL-G06 26 W0050600.08.. P2-8008-N WOHX 10T308 EN 28
W0034060.04.. P01-8004-L WOHX 060304 EL-G06 26
W0034120.02.. P01-8802-L WOHX 060302 EL-G12 26 W0058060.06.. P3-8006-L WOHX 120406 EL-G06 26
W0034120.04.. P01-8804-L WOHX 060304 EL-G12 26 W0058120.06.. P3-8806-L WOHX 120406 EL-G12 26
W0034200.02.. P01-8902-L WOHX 060302 EL-G20 26 W0058360.06.. P3-8006-R WOHX 120406 ER-G06 27
W0034200.04.. P01-8904-L WOHX 060304 EL-G20 26 W0058420.06.. P3-8806-R WOHX 120406 ER-G12 27
W0034360.02.. P01-8002-R WOHX 060302 ER-G06 27 W0058600.06.. P3-8006-N WOHX 120406 EN 28
W0034360.04.. P01-8004-R WOHX 060304 ER-G06 27
W0034420.02.. P01-8802-R WOHX 060302 ER-G12 27 W0124060.02.. P02-380602-L WOHX 05T302 EL-G06 29
W0034420.04.. P01-8804-R WOHX 060304 ER-G12 27 W0124120.02.. P02-381202-L WOHX 05T302 EL-G12 29
W0034420.08.. P01-8808-R WOHX 060308 ER-G12 27 W0124120.04.. P02-381204-L WOHX 05T304 EL-G12 29
W0034500.02.. P01-8902-R WOHX 060302 ER-G20 27 W0124200.02.. P02-382002-L WOHX 05T302 FL-G20 29
W0034500.04.. P01-8904-R WOHX 060304 ER-G20 27 W0124360.02.. P02-380602-R WOHX 05T302 ER-G06 30
W0034600.02.. P01-8002-N WOHX 060302 EN 28 W0124420.02.. P02-381202-R WOHX 05T302 ER-G12 30
W0034600.04.. P01-8004-N WOHX 060304 EN 28 W0124420.04.. P02-381204-R WOHX 05T304 ER-G12 30
W0034600.08.. P01-8008-N WOHX 060308 EN 28 W0124600.04.. P02-380004-N WOHX 05T304 EN 31
W0034990.04.. P01-8004 WOHX 060304 -N 28 W0124600.08.. P02-380008-N WOHX 05T308 EN 31
W0034990.08.. P01-8008 WOHX 060308 -N 28 W0124940.04.. P02-380004 WOGX 05T304 F 32

W0042060.02.. P1-8002-L WOHX 08T302 EL-G06 26 W0134060.02.. P01-380602-L WOHX 06T302 EL-G06 29
W0042060.04.. P1-8004-L WOHX 08T304 EL-G06 26 W0134060.04.. P01-380604-L WOHX 06T304 EL-G06 29
W0042120.02.. P1-8802-L WOHX 08T302 EL-G12 26 W0134120.02.. P01-381202-L WOHX 06T302 EL-G12 29
W0042120.04.. P1-8804-L WOHX 08T304 EL-G12 26 W0134120.04.. P01-381204-L WOHX 06T304 EL-G12 29

98
Inserts W13.. to W28..

Order No. Old KOMET New ISO Page Order No. Old KOMET New ISO Page
Description Description Description Description

W0134200.02.. P01-382002-L WOHX 06T302 FL-G20 29 W0442480.02.. P1-R WNHX 08T302 ER-G18 35
W0134360.02.. P01-380602-R WOHX 06T302 ER-G06 30 W0442480.04.. P1-R-0.4 WNHX 08T304 ER-G18 35
W0134360.04.. P01-380604-R WOHX 06T304 ER-G06 30 W0442600.02.. P1-N WNHX 08T302 EN 35
W0134360.34.. F01-380614-R90 WOHX 06T3PA ER-G06 31 W0450180.04.. P2-L WNHX 100404 EL-G18 34
W0134360.35.. F01-380614-R75 WOHX 06T3EA ER-G06 31 W0450480.04.. P2-R WNHX 100404 ER-G18 35
W0134420.02.. P01-381202-R WOHX 06T302 ER-G12 30 W0450600.04.. P2-N WNHX 100404 EN 35
W0134420.04.. P01-381204-R WOHX 06T304 ER-G12 30 W0458180.06.. P3-L WNHX 120606 EL-G18 34
W0134600.04.. P01-380004-N WOHX 06T304 EN 31 W0458480.06.. P3-R WNHX 120606 ER-G18 35
W0134600.08.. P01-380008-N WOHX 06T308 EN 31
W0134940.04.. P01-380004 WOGX 06T304 F 32 W0542180.02.. P1-99-L WNHX 08T302 EL-B18 34

W0142060.02.. P1-480602-L WOHX 080402 EL-G06 29 W0550180.04.. P2-99-L WNHX 100404 EL-B18 34
W0142060.04.. P1-480604-L WOHX 080404 EL-G06 29 W0550480.04.. P2-99-R WNHX 100404 ER-B18 35
W0142120.04.. P1-481204-L WOHX 080404 EL-G12 29 W0558480.06.. P3-99-R WNHX 120606 ER-B18 35
W0142360.02.. P1-480602-R WOHX 080402 ER-G06 30
W0142360.04.. P1-480604-R WOHX 080404 ER-G06 30 W2810000.02.. PD05-200802 WOEX 03T102-00 39
W0142360.34.. F1-480618-R90 WOHX 0804PA ER-G06 31 W2810010.02.. K05-200802 WOEX 03T102-01 41
W0142420.02.. P1-481202-R WOHX 080402 ER-G12 30 W2810030.02.. KX05-200002 WOEX 03T102-03 45
W0142420.04.. P1-481204-R WOHX 080404 ER-G12 30
W0142600.04.. P1-480004-N WOHX 080404 EN 31 W2817000.04.. PD04-250804 WOEX 040204-00 39
W0142600.08.. P1-480008-N WOHX 080408 EN 31 W2817010.04.. K04-250804 WOEX 040204-01 41
W0142940.04.. P1-480004 WOGX 080404 F 32 W2817030.04.. KX04-280004 WOEX 040204-03 45

W0150060.04.. P2-530604-L WOHX 100504 EL-G06 29 W2824000.02.. PD02-8302 WOEX 050302-00 41

W0150120.04.. P2-531204-L WOHX 100504 EL-G12 29 W2824000.04.. PD02-8304 WOEX 050304-00 41
W0150360.04.. P2-530604-R WOHX 100504 ER-G06 30 W2824010.04.. K02-8304 WOEX 050304-01 43
W0150420.04.. P2-531204-R WOHX 100504 ER-G12 30 W2824010.08.. K02-8308 WOEX 050308-01 43
W0150600.04.. P2-530004-N WOHX 100504 EN 31 W2824020.04.. K02-8004-S WOEX 050304-02 45
W0150600.08.. P2-530008-N WOHX 100508 EN 31 W2824030.04.. KX02-300004 WOEX 050304-03 47

W0158060.06.. P3-600606-L WOHX 120606 EL-G06 29 W2834000.02.. PD01-8302 WOEX 060302-00 39

W0158120.06.. P3-601206-L WOHX 120606 EL-G12 29 W2834000.04.. PD01-8304 WOEX 060304-00 39
W0158600.06.. P3-600006-N WOHX 120606 EN 31 W2834000.08.. PD01-8308 WOEX 060308-00 39
W2834010.04.. K01-8304 WOEX 060304-01 41
W0422180.01.. P02-L WNHX 050201 EL-G18 34 W2834010.08.. K01-8308 WOEX 060308-01 41
W0422480.01.. P02-R WNHX 050201 ER-G18 35 W2834020.04.. K01-8304-S WOEX 060304-02 43
W0422600.01.. P02-N WNHX 050201 EN 35 W2834030.04.. KX01-380004 WOEX 060304-03 45

W0434180.02.. P01-L WNHX 060302 EL-G18 34 W2842000.02.. PD1-8302 WOEX 08T302-00 39

W0434180.04.. P01-L-0.4 WNHX 060304 EL-G18 34 W2842000.04.. PD1-8304 WOEX 08T304-00 39
W0434480.02.. P01-R WNHX 060302 ER-G18 35 W2842000.08.. PD1-8308 WOEX 08T308-00 39
W0434480.04.. P01-R-0.4 WNHX 060304 ER-G18 35 W2842010.04.. K1-8304 WOEX 08T304-01 41
W0434600.02.. P01-N WNHX 060302 EN 35 W2842010.08.. K1-8308 WOEX 08T308-01 41
W2842020.04.. K1-8004-S WOEX 08T304-02 43
W0442180.02.. P1-L WNHX 08T302 EL-G18 34 W2842030.04.. KX1-380004 WOEX 08T304-03 45
W0442180.04.. P1-L-0.4 WNHX 08T304 EL-G18 34

99
 Cross reference List

Inserts W28.. to W30..

Order No. Old KOMET New ISO Page Order No. Old KOMET New ISO Page
Description Description Description Description

W2850000.04.. PD2-8304 WOEX 10T304-00 39 W2934130.04.. KXT01-380004 WOEX 06T304-13 47

W2850000.08.. PD2-8308 WOEX 10T308-00 39
W2850010.04.. K2-8304 WOEX 10T304-01 41 W2942000.04.. PD01-481204 WOEX 080404-00 38
W2850010.08.. K2-8308 WOEX 10T308-01 41 W2942000.08.. PD01-481208 WOEX 080408-00 38
W2850020.04.. K2-8004-S WOEX 10T304-02 43 W2942010.04.. K01-481204 WOEX 080404-01 40
W2850030.04.. KX2-430004 WOEX 10T304-03 45 W2942010.08.. K01-481208 WOEX 080408-01 40
W2942020.04.. KS01-480004 WOEX 080404-02 42
W2858000.08.. PD3-8308 WOEX 120408-00 39 W2942020.08.. KS01-480008 WOEX 080408-02 42
W2858010.08.. K3-8308 WOEX 120408-01 41 W2942030.04.. KX01-480004 WOEX 080404-03 43
W2858020.06.. K3-8006-S WOEX 120406-02 43 W2942030.08.. KX01-480008 WOEX 080408-03 43
W2858030.08.. KX3-500008 WOEX 120408-03 45 W2942110.04.. PAT1-481204 WOEX 080404-11 46
W2942130.04.. KXT1-480004 WOEX 080404-13 47
W2865010.08.. K4-8308 WOEX 130608-01 41
W2865010.12.. K4-8312 WOEX 130612-01 41 W2950000.04.. PD2-531204 WOEX 100504-00 38
W2950000.08.. PD2-531208 WOEX 100508-00 38
W2872010.12.. K5-8312 WOEX 170612-01 41 W2950010.04.. K2-531204 WOEX 100504-01 40
W2950010.08.. K2-531208 WOEX 100508-01 40
W2904010.02.. KT06-160802 WOEX 020102-01 40 W2950020.04.. KS2-530004 WOEX 100504-02 42
W2950030.04.. KX2-530004 WOEX 100504-03 44
W2910010.04.. KT05-230804 WOEX 030204-01 40 W2950030.08.. KX2-530008 WOEX 100508-03 44
W2910110.04.. PAT05-230804 WOEX 030204-11 46 W2950110.04.. PAT2-531204 WOEX 100504-11 46
W2910130.04.. KXT05-230004 WOEX 030204-13 47 W2950130.04.. KXT2-530004 WOEX 100504-13 47

W2918010.04.. KT04-320804 WOEX 040304-01 40 W2958000.08.. PD3-601208 WOEX 120608-00 38

W2918110.04.. PAT04-320804 WOEX 040304-11 46 W2958010.08.. K3-601208 WOEX 120608-01 40
W2918130.04.. KXT04-320004 WOEX 040304-13 47 W2958020.08.. KS3-600008 WOEX 120608-02 42
W2958030.08.. KX3-600008 WOEX 120608-03 44
W2924000.02.. PD02-381202 WOEX 05T302-00 38 W2958130.08.. KXT3-600008 WOEX 120608-13 47
W2924000.04.. PD02-381204 WOEX 05T304-00 38
W2924010.04.. K02-381204 WOEX 05T304-01 40 W3004060.02.. U3-8002-L TOHX 06T102 EL-G06 48
W2924010.08.. K02-381208 WOEX 05T308-01 40 W3004060.03.. U3-8003-L TOHX 06T103 EL-G06 48
W2924020.04.. KS02-380004 WOEX 05T304-02 42 W3004060.04.. U3-8004-L TOHX 06T104 EL-G06 48
W2924020.08.. KS02-380008 WOEX 05T308-02 42 W3004060.30.. U3-8000-L TOHX 06T100 EL-G06 48
W2924030.04.. KX02-380004 WOEX 05T304-03 44 W3004060.31.. UF3-180620-L TOHX 06T102 EL-UF06 52
W2924110.04.. PAT02-381204 WOEX 05T304-11 46 W3004120.02.. U3-8802-L TOHX 06T102 EL-G12 48
W2924130.04.. KXT02-380004 WOEX 05T304-13 47 W3004120.03.. U3-8803-L TOHX 06T103 EL-G12 48
W3004120.04.. U3-8804-L TOHX 06T104 EL-G12 48
W2934000.04.. PD01-381204 WOEX 06T304-00 38 W3004120.30.. U3-8800-L TOHX 06T100 EL-G12 48
W2934000.08.. PD01-381208 WOEX 06T308-00 38 W3004120.31.. UF3-181220-L TOHX 06T102 EL-UF12 52
W2934010.04.. K01-381204 WOEX 06T304-01 40 W3004120.32.. US3-181202-L TOHX 06T102 EL-US12 53
W2934010.08.. K01-381208 WOEX 06T308-01 40 W3004200.02.. U3-8902-L TOHX 06T102 EL-G20 48
W2934020.04.. KS01-380004 WOEX 06T304-02 42 W3004200.03.. U3-8903-L TOHX 06T103 EL-G20 48
W2934020.08.. KS01-380008 WOEX 06T308-02 42 W3004360.02.. U3-8002-R TOHX 06T102 ER-G06 49
W2934030.04.. KX01-380004 WOEX 06T304-03 44 W3004360.03.. U3-8003-R TOHX 06T103 ER-G06 49
W2934030.08.. KX01-380008 WOEX 06T308-03 44 W3004360.04.. U3-8004-R TOHX 06T104 ER-G06 49
W2934110.04.. PAT01-381204 WOEX 06T304-11 46 W3004420.02.. U3-8802-R TOHX 06T102 ER-G12 49

100
Inserts W30..

Order No. Old KOMET New ISO Page Order No. Old KOMET New ISO Page
Description Description Description Description

W3004420.03.. U3-8803-R TOHX 06T103 ER-G12 49 W3014820.04.. U4-8804-L TOHX 090204 FL-G12 51
W3004420.04.. U3-8804-R TOHX 06T104 ER-G12 49 W3014820.32.. US4-251202-L TOHX 090202 FL-US12 53
W3004420.30.. U3-8800-R TOHX 06T100 ER-G12 49 W3014830.02.. U4-8802-R TOHX 090202 FR-G12 51
W3004500.02.. U3-8902-R TOHX 06T102 FR-G20 49 W3014830.04.. U4-8804-R TOHX 090204 FR-G12 51
W3004500.03.. U3-8903-R TOHX 06T103 FR-G20 49 W3014940.04.. U4-8004-FULL FACED TOHX 090204 F 55
W3004600.03.. U3-8003-N TOHX 06T103 EN 50 W3014990.02.. UR-8002-TIPPED TOHX 090202 TN 54
W3004660.03.. U3-8003-F TOHX 06T103 EN-G06 50 W3014990.04.. UR-8004-TIPPED TOHX 090204 TN 54
W3004720.03.. U3-8803-F TOHX 06T103 EN-G12 50 W3014990.08.. UR-8008-TIPPED TOHX 090208 FN 54
W3004820.02.. U3-8802-L TOHX 06T102 FL-G12 51
W3004820.03.. U3-8803-L TOHX 06T103 FL-G12 51 W3026060.02.. U5-8002-L TOHX 140302 EL-G06 48
W3004820.04.. U3-8804-L TOHX 06T104 FL-G12 51 W3026060.04.. U5-8004-L TOHX 140304 EL-G06 48
W3004820.32 US3-181202-L TOHX 06T102 FL-US12 53 W3026060.05.. U5-8005-L TOHX 140305 EL-G06 48
W3004830.02.. U3-8802-R TOHX 06T102 FR-G12 51 W3026060.08.. U5-8008-L TOHX 140308 EL-G06 48
W3004830.03.. U3-8803-R TOHX 06T103 FR-G12 51 W3026060.31.. UF5-300630-L TOHX 140302 EL-UF06 52
W3004990.02.. U3-8002-TIPPED TOHX 06T102 TN 54 W3026120.02.. U5-8802-L TOHX 140302 EL-G12 48
W3004990.03.. U3-8003-TIPPED TOHX 06T103 FN 54 W3026120.04.. U5-8804-L TOHX 140304 EL-G12 48
W3004990.04.. U3-8004-TIPPED TOHX 06T104 FN 54 W3026120.05.. U5-8805-L TOHX 140305 EL-G12 48
W3026120.08.. U5-8808-L TOHX 140308 EL-G12 48
W3014060.02.. U4-8002-L TOHX 090202 EL-G06 48 W3026120.31.. UF5-301230-L TOHX 140302 FL-UF12 52
W3014060.04.. U4-8004-L TOHX 090204 EL-G06 48 W3026120.32.. US5-301202-L TOHX 140302 EL-US12 53
W3014060.08.. U4-8008-L TOHX 090208 EL-G06 48 W3026120.39.. USW5-301220-L TOHX 1403ZZ EL-39G12 52
W3014060.30.. U4-8000-L TOHX 090200 EL-G06 48 W3026200.02.. U5-8902-L TOHX 140302 FL-G20 48
W3014060.31.. UF4-250630-L TOHX 090200 EL-UF06 52 W3026200.05.. U5-8905-L TOHX 140305 EL-G20 48
W3014120.02.. U4-8802-L TOHX 090202 EL-G12 48 W3026360.02.. U5-8002-R TOHX 140302 ER-G06 49
W3014120.04.. U4-8804-L TOHX 090204 EL-G12 48 W3026360.04.. U5-8004-R TOHX 140304 ER-G06 49
W3014120.08.. U4-8808-L TOHX 090208 EL-G12 48 W3026360.05.. U5-8005-R TOHX 140305 ER-G06 49
W3014120.30.. U4-8800-L TOHX 090200 EL-G12 48 W3026420.02.. U5-8802-R TOHX 140302 ER-G12 49
W3014120.31.. UF4-251230-L TOHX 090202 EL-UF12 52 W3026420.04.. U5-8804-R TOHX 140304 ER-G12 49
W3014120.32.. US4-251202-L TOHX 090202 EL-US12 53 W3026420.05.. U5-8805-R TOHX 140305 ER-G12 49
W3014120.39.. USW4-251220-L TOHX 0902ZZ EL-39G12 52 W3026500.05.. U5-8905-R TOHX 140305 FR-G20 49
W3014200.02.. U4-8902-L TOHX 090202 EL-G20 48 W3026600.05.. U5-8005-N TOHX 140305 EN 50
W3014200.04.. U4-8904-L TOHX 090204 EL-G20 48 W3026600.08.. U5-8008-N TOHX 140308 EN 50
W3014360.02.. U4-8002-R TOHX 090202 ER-G06 49 W3026660.05.. U5-8005-F TOHX 140305 EN-G06 50
W3014360.04.. U4-8004-R TOHX 090204 ER-G06 49 W3026720.05.. U5-8805-F TOHX 140305 EN-G12 50
W3014420.02.. U4-8802-R TOHX 090202 ER-G12 49 W3026820.02.. U5-8802-L TOHX 140302 FL-G12 51
W3014420.04.. U4-8804-R TOHX 090204 ER-G12 49 W3026820.04.. U5-8804-L TOHX 140304 FL-G12 51
W3014500.02.. U4-8902-R TOHX 090202 FR-G20 49 W3026820.05.. U5-8805-L TOHX 140305 FL-G12 51
W3014500.04.. U4-8904-R TOHX 090204 FR-G20 49 W3026820.32.. US5-301202-L TOHX 140302 FL-US12 53
W3014600.02.. U4-8002-N TOHX 090202 EN 49 W3026940.05.. U5-8005-FULL FACED TOHX 140305 F 55
W3014600.04.. U4-8004-N TOHX 090204 EN 50 W3026990.02.. U5-8002-TIPPED TOHX 140302 TN 54
W3014660.02.. U4-8002-F TOHX 090202 EN-G06 50 W3026990.04.. U5-8004-TIPPED TOHX 140304 TN 54
W3014660.04.. U4-8004-F TOHX 090204 EN-G06 50 W3026990.05.. U5-8005-TIPPED TOHX 140305 FN 54
W3014660.33.. U8-8077-F TOHX 090204 EN-U8.77 50
W3014720.04.. U4-8804-F TOHX 090204 EN-G12 50 W3044060.08.. U6-8008-L TOHX 22T308 EL-G06 48
W3014800.04.. U4-8904-F TOHX 090204 FN-G20 50
W3014820.02.. U4-8802-L TOHX 090202 FL-G12 51

101
 Cross reference List

Inserts W30.. to W78..

Order No. Old KOMET New ISO Page Order No. Old KOMET New ISO Page
Description Description Description Description

W3044120.08.. U6-8808-L TOHX 22T308 EL-G12 48 W3244600.04.. TPHB 220404 TPHB 220404 FN-P 59
W3044360.08.. U6-8008-R TOHX 22T308 ER-G06 49 W3244600.08.. TPHB 220408 TPHB 220408 FN-P 59
W3044420.08.. U6-8808-R TOHX 22T308 ER-G12 49
W3044600.08.. U6-8008-N TOHX 22T308 EN 51 W3418660.04.. T4-320604-F TOHT 110304 EN-G06 60
W3044660.08.. U6-8008-F TOHX 22T308 EN-G06 51 W3718600.04.. TEHB 110204 TEHB 110204 FN-P 60
W3044720.08.. U6-8808-F TOHX 22T308 EN-G12 51 W3718600.08.. TEHB 110208 TEHB 110208 FN-P 60
W3723600.04.. TEHB 130304 TEHB 130304 FN-P 60
W3203150.04.. TPHX 060104 FL TPHX 060104 FL-P15 56 W3723600.08.. TEHB 130308 TEHB 130308 FN-P 60
W3203450.04.. TPHX 060104 FR TPHX 060104 FR-P15 57 W3732600.08.. TEHB 160308 TEHB 160308 FN-P 60
W3203600.04.. TPHB 060104 TPHB 060104 FN-P 59
W3203990.04.. TPHB 060104 TPHB 060104 FN 58 W5704040.04.. U3-181404-U CERMET TOHX 06T104 EN-04 61
W5714040.04.. U4-251404-U CERMET TOHX 090204 EN-04 61
W3213150.04.. TPHX 090204 FL TPHX 090204 FL-P15 56 W5726040.04.. U5-301404-U CERMET TOHX 140304 EN-04 61
W3213150.08.. TPHX 090208 FL TPHX 090208 FL-P15 56
W3213450.04.. TPHX 090204 FR TPHX 090204 FR-P15 57 W5918050.04.. T4-321004-U TOHT 110304 EN-05 63
W3213600.04.. TPHB 090204 TPHB 090204 FN-P 59 W5932050.05.. T5-481005-U TOHT 160405 EN-05 63
W3213600.08.. TPHB 090208 TPHB 090208 FN-P 59 W5932050.08.. T5-481008-U TOHT 160408 EN-05 63
W3213940.04.. TPHB 090204-TIPPED TPHB 090204 F 59
W3213990.04.. TPHB 090204-FULL FACED TPHB 090204 FN 59 W6018060.02.. C1-550602-L DOHT 07T102 EL-G06 63
W6018060.04.. C1-550604-L DOHT 07T104 EL-G06 64
W3218150.04.. TPHX 110204 FL TPHX 110204 FL-P15 56 W6018120.02.. C1-551202-L DOHT 07T102 EL-G12 64
W3218150.08.. TPHX 110208 FL TPHX 110208 FL-P15 56 W6018120.04.. C1-551204-L DOHT 07T104 EL-G12 64
W3218450.04.. TPHX 110204 FR TPHX 110204 FR-P15 57 W6018200.02.. C1-552002-L DOHT 07T102 EL-G20 64
W3218600.04.. TPHB 110204 TPHB 110204 FN-P 59 W6018360.02.. C1-550602-R DOHT 07T102 ER-G06 65
W3218600.08.. TPHB 110208 TPHB 110208 FN-P 59 W6018360.04.. C1-550604-R DOHT 07T104 ER-G06 65
W3218940.04.. TPHB 110204-FULL FACED TPHB 110204 F 59 W6018420.02.. C1-551202-R DOHT 07T102 ER-G12 65
W3218990.04.. TPHB 110204-TIPPED TPHB 110204 FN 59 W6018420.04.. C1-551204-R DOHT 07T104 ER-G12 65
W6018500.02.. C1-552002-R DOHT 07T102 ER-G20 65
W3223150.04.. TPHX 130304 FL TPHX 130304 FL-P15 56 W6018500.04.. C1-552004-R DOHT 07T104 ER-G20 65
W3223150.08.. TPHX 130308 FL TPHX 130308 FL-P15 56 W6018600.02.. C1-550002-N DOHW 07T102 EN 64
W3223450.04.. TPHX 130304 FR TPHX 130304 FR-P15 57 W6018600.04.. C1-550004-N DOHW 07T104 EN 64
W3223600.04.. TPHB 130304 TPHB 130304 FN-P 59 W6018990.02.. C1-550002-N DOHW 07T102 TN 65
W3223600.08.. TPHB 130308 TPHB 130308 FN-P 59 W6018990.04.. C1-550004-N DOHW 07T104 TN 65
W3223940.04.. TPHB 130304-FULL FACED TPHB 130304 F 58
W3223990.04.. TPHB 130304-TIPPED TPHB 130304 FN 58 W6032060.04.. C2-550604-L DOHT 11T304 EL-G06 64
W6032120.02.. C2-551202-L DOHT 11T302 EL-G12 64
W3232150.04.. TPHX 160304 FL TPHX 160304 FL-P15 56 W6032120.04.. C2-551204-L DOHT 11T304 EL-G12 64
W3232150.08.. TPHX 160308 FL TPHX 160308 FL-P15 56 W6032120.08.. C2-551208-L DOHT 11T308 EL-G12 64
W3232450.04.. TPHX 160304 FR TPHX 160304 FR-P15 57 W6032360.04.. C2-550604-R DOHT 11T304 ER-G06 65
W3232600.04.. TPHB 160304 TPHB 160304 FN-P 59 W6032360.08.. C2-550608-R DOHT 11T308 ER-G06 65
W3232600.08.. TPHB 160308 TPHB 160308 FN-P 59 W6032420.02.. C2-551202-R DOHT 11T302 ER-G12 65
W3232940.04.. TPHB 160304-FULL FACED TPHB 160304 F 58 W6032420.04.. C2-551204-R DOHT 11T304 ER-G12 65
W3232990.04.. TPHB 160304-TIPPED TPHB 160304 FN 58 W6032420.08.. C2-551208-R DOHT 11T308 ER-G12 65
W6032600.02.. C2-550002-N DOHW 11T302 EN 64
W3244150.08.. TPHX 220408 FL TPHX 220408 FL-P15 56 W6032600.04.. C2-550004-N DOHW 11T304 EN 64
W3244450.08.. TPHX 220408 FR TPHX 220408 FR-P15 57 W6032990.02.. C2-550002-TIPPED DOHW 11T302 TN 65

102
Inserts W78.. to W84..

Order No. Old KOMET New ISO Page Order No. ISO ANSI Page
Description Description Description Description

W6032990.04.. C2-550004-TIPPED DOHW 11T304 TN 65 W8313000.01.. SOEX 050204-01 - 81

W8313000.02.. SOEX 050204-13 - 81
W7818070.02.. C1-351202-U VOHT 110302-07 66 W8318000.01.. SPGT 060202 FL-P15 - 68
W7818070.04.. C1-351204-U VOHT 110304-07 66 W8318000.03.. SPGT 060204 FL-P15 - 68
W7818990.04.. C1-350004-TIPPED VOHW 110304 FN 66 W8318000.09.. SOEX 060306-01 - 81
W7832070.04.. C2-351204-U VOHT 160404-07 66 W8318000.10.. SOEX 060306-13 - 81
W7832070.08.. C2-351208-U VOHT 160408-07 66 W8318000.13.. SPGW 060204 FN55 - 68
W7832990.08.. C2-350008-TIPPED VOHW 160408 FN 66
W8323000.01.. SOEX 07T308-01 - 81
W7918040.04.. C1-551404-U CERMET DOHT 07T104-04 67 W8323000.02.. SOEX 07T308-13 - 81
W7918060.02.. C1-551202-U DOHT 07T102-06 67 W8332000.01.. SCMT 09T304-F3 SCMT 32.51-F3 80
W7918060.04.. C1-551204-U DOHT 07T104-06 67 W8332000.02.. SCMT 09T308-F4 SCMT 32.52-F4 80
W7918060.08.. C1-551208-U DOHT 07T108-06 67 W8332000.03.. SPGT 09T304 FL-P15 - 68
W7932040.04.. C2-551404-U CERMET DOHT 11T304-04 67 W8332000.05.. SPGT 09T308 FL-P15 - 68
W7932060.02.. C2-551202-U DOHT 11T302-06 67 W8332000.13.. SPGW 09T304 FN55 - 68
W7932060.04.. C2-551204-U DOHT 11T304-06 67 W8332000.14.. SPGW 09T308 FN55 - 68
W7932060.08.. C2-551208-U DOHT 11T308-06 67 W8332000.15.. SOEX 090408-01 - 81
W8332000.17.. SOEX 090408-13 - 81
W8332000.18.. SPGW 09T304-FN - 69
W8332000.19.. SPGW 09T308-FN - 69

W8344000.01.. SNMA 120408 SNMA 432 80

W8344000.03.. SNMM 120408 SNMM 432 80
W8344000.04.. SNMM 120412 SNMM 433 80
W8344000.05.. SNMG 120408-R2 SNMG 432-R2 80
W8344000.06.. SNMG 120408-M3 SNMG 432-M3 80
W8344000.08.. SCMT 120404-F3 SCMT 431-F3 80
W8344000.09.. SCMT 120408-F5 SCMT 432-F5 80
W8344000.14.. SPGT 120404 FL-P15 - 68
W8344000.15.. SPGT 120408 FL-P15 - 68
W8344000.16.. SPGW 120404 FN55 - 68
W8344000.17.. SPGW 120408 FN55 - 68
W8344000.18.. SOEX 120508-01 - 81
W8344000.19.. SOEX 120508-13 - 81
W8344000.20.. SPGW 120404 FN - 69
W8344000.21.. SPGW 120408 FN - 69

W8362000.01.. SNMA 190616 SNMA 644 80

W8362000.02.. SNMM 190616-R4 SNMM 644-R4 80
W8362000.03.. SNMG 190616 SNMG 644 80
W8362000.04.. SNMG 190612 SNMG 643 80

W8418000.01.. TCMT 110204-F5 TCMT 21.53-F5 83

W8432000.01.. TNMG 160412-R2 TNMG 333-R2 82

W8432000.04.. TNMG 160404-M3 TNMG 331-M3 82

103
 Cross reference List

Inserts W84.. to W90..

Order No. ISO ANSI Page Order No. ISO ANSI Page
Description Description Description Description

W8432000.05.. TNMG 160408-M3 TNMG 332-M3 82 W8544000.25.. CPGW 120404 FL55 - 70

W8432000.06.. TNMG 160404-F1 TNMG 331-F1 82 W8544000.26.. CPGW 120408 FL55 - 70
W8432000.07.. TCMT 16T304-F3 TCMT 32.51-F3 83 W8544000.27.. CPGW 120404 FN55 - 71
W8544000.28.. CPGW 120408 FN55 - 71
W8509000.01.. CPGT 040102 FL-P15 - 70 W8544000.29.. CPGT 120404 FL-P15 - 71
W8509000.03.. CPGT 040104 FL-P15 - 70 W8544000.30.. CPGT 120408 FL-P15 - 71
W8509000.05.. CPGW 040102 FN - 71 W8544000.32.. CPGW 120404 FN - 71
W8509000.06.. CPGW 040104 FN - 71 W8544000.33.. CPGW 120408 FN - 71
W8544000.34.. CCMT 120408 EN-F9 CCMT 432 EN-F9 85
W8518000.01.. CCMT 060202-F3 CCMT 21.50.5-F3 85
W8518000.02.. CCMT 060204-F3 CCMT 21.51-F3 85 W8553000.01.. CNMG 160612 CNMG 543 84
W8518000.06.. CPGT 060202 FL-P15 - 70 W8553000.02.. CNMM 160612-R4 CNMM 543-R4 84
W8518000.08.. CPGT 060204 FL-P15 - 70 W8553000.03.. CNMG 160612-R2 CNMG 543-R2 84
W8518000.16.. CPGW 060204 FN55 - 71
W8518000.17.. CPGW 060202 FN - 71 W8618000.01.. DCMT 070202 DCMT 21.50.5 87
W8518000.18.. CPGW 060204 FN - 71 W8618000.02.. DCMT 070204 DCMT 21.51 87
W8518000.19.. CCMT 060202 EN-F9 CCMT 21.50.5 EN-F9 85
W8518000.20.. CCMT 060204 EN-F9 CCMT 21.51 EN-F9 85 W8632000.01.. DNMG 110408-R2 DNMG 332-R2 86
W8518000.21.. CPGW 060204 FL - 70 W8632000.02.. DNMG 110412-R2 DNMG 333-R2 86
W8632000.03.. DNMG 110404-M2 DNMG 331-M2 86
W8532000.02.. CCMT 09T304 CCMT 32.51 85 W8632000.04.. DNMG 110408-M2 DNMG 332-M2 86
W8532000.03.. CCMT 09T304-F3 CCMT 32.51-F3 85 W8632000.06.. DNMG 110402-F2 DNMG 330.5-F2 86
W8532000.04.. CCMT 09T308 CCMT 32.52 85 W8632000.07.. DNMG 110404-F2 DNMG 331-F2 86
W8532000.05.. CCMT 09T308-F3 CCMT 32.52-F3 85 W8632000.08.. DNMG 110408-F2 DNMG 332-F2 86
W8532000.19.. CPGW 09T304 FL55 - 70 W8632000.09.. DCMT 11T302 DCMT 32.50.5 87
W8532000.20.. CPGW 09T308 FL55 - 70 W8632000.10.. DCMT 11T304 DCMT 32.51 87
W8532000.21.. CPGW 09T304 FN55 - 71 W8632000.11.. DCMT 11T308 DCMT 32.52 87
W8532000.22.. CPGW 09T308 FN55 - 71 W8632000.12.. DCMT 11T304-F3 DCMT 32.51-F3 87
W8532000.23.. CPGT 09T304 FL-P15 - 70 W8632000.13.. DCMT 11T308-F3 DCMT 32.52-F3 87
W8532000.24.. CPGT 09T308 FL-P15 - 70
W8532000.26.. CPGW 09T304 FN - 71 W8644000.01.. DNMG 150608-R2 DNMG 442-R2 86
W8532000.27.. CPGW 09T308 FN - 71 W8644000.02.. DNMG 150612-R2 DNMG 443-R2 86
W8532000.28.. CCMT 09T304 EN-F9 CCMT 32.51 EN-F9 85 W8644000.03.. DNMG 150608-M2 DNMG 442-M2 86
W8532000.29.. CCMT 09T308 EN-F9 CCMT 32.52 EN-F9 85
W8923000.02.. VNMG 13T304-F2 VNMG 2.52.51-F2 88
W8544000.01.. CNMA 120408 CNMA 432 84 W8923000.03.. VNMG 13T308-F2 VNMG 2.52.52-F2 88
W8544000.02.. CNMA 120412 CNMA 433 84 W8932000.01.. VNMG 160404 VNMG 331 88
W8544000.03.. CNMM 120408-R1 CNMM 432-R1 84 W8932000.02.. VNMG 160408 VNMG 332 88
W8544000.04.. CNMM 120412-R1 CNMM 433-R1 84 W8932000.03.. VNMP 160404 VNMP 331 88
W8544000.08.. CNMG 120404-M2 CNMG 431-M2 84 W8932000.04.. VNMP 160408 VNMP 332 88
W8544000.09.. CNMG 120408-M2 CNMG 432-M2 84 W8932000.05.. VCMT 160404-F3 VCMT 331-F3 88
W8544000.10.. CNMG 120412-M2 CNMG 433-M2 84 W8932000.06.. VCMT 160408-F3 VCMT 332-F3 88
W8544000.14.. CNMG 120404-F2 CNMG 431-F2 84 W8932000.07.. VBMT 160404 VBMT 331 88
W8544000.15.. CNMG 120408-F2 CNMG 432-F2 84 W8932000.08.. VBMT 160408 VBMT 332 88
W8544000.16.. CNMZ 120404 FR-F6 CNMZ 431 FR-F6 84
W8544000.17.. CNMZ 120404 FL-F6 CNMZ 431 FL-F6 84 W9044000.01.. WNMA 080412 WNMA 433 89

104
Inserts W90.. to W97..

Order No. ISO ANSI Page Order No. ISO ANSI Page
Description Description Description Description

W9044000.03.. WNMG 080408-R2 WNMG 432-R2 89

W9044000.04.. WNMG 080412-R2 WNMG 433-R2 89
W9044000.08.. WNMG 080404-M3 WNMG 431-M3 89
W9044000.09.. WNMG 080408-M3 WNMG 432-M3 89
W9044000.10.. WNMG 080412-M3 WNMG 433-M3 89
W9044000.11.. WNMG 080404-F2 WNMG 431-F2 89
W9044000.12.. WNMG 080408-F2 WNMG 432-F2 89
W9044000.13.. WNMZ 080404 FL-F6 WNMZ 431 FL-F6 89
W9044000.14.. WNMG 080408-R3 WNMG 432-R3 89
W9044000.15.. WNMG 080412-R3 WNMG 433-R3 98

W9534000.01.. RCMT10T3MO-F3 - 89

W9732000.01.. 16ERM 1.00 ISO - 90

W9732000.02.. 16ERM 1.25 ISO - 90
W9732000.03.. 16ERM 1.50 ISO - 90
W9732000.04.. 16ERM 1.75 ISO - 90
W9732000.05.. 16ERM 2.00 ISO - 90
W9732000.06.. 16ERM 2.50 ISO - 90
W9732000.07.. 16ERM 3.00 ISO - 90
W9732000.08.. 16IRM 1.00 ISO - 90
W9732000.09.. 16IRM 1.25 ISO - 90
W9732000.10.. 16IRM 1.50 ISO - 90
W9732000.11.. 16IRM 1.75 ISO - 90
W9732000.12.. 16IRM 2.00 ISO - 90
W9732000.13.. 16IRM 2.50 ISO - 90
W9732000.14.. 16IRM 3.00 ISO - 90
W9732000.15.. 16EL 1.00 ISO - 90
W9732000.16.. 16EL 1.25 ISO - 90
W9732000.17.. 16EL 1.50 ISO - 90
W9732000.18.. 16EL 1.75 ISO - 90
W9732000.19.. 16EL 2.00 ISO - 90
W9732000.20.. 16EL 2.50 ISO - 90
W9732000.21.. 16EL 3.00 ISO - 90
W9732000.22.. 16IL 1.00 ISO - 90
W9732000.23.. 16IL 1.25 ISO - 90
W9732000.24.. 16IL 1.50 ISO - 90
W9732000.25.. 16IL 1.75 ISO - 90
W9732000.26.. 16IL 2.00 ISO - 90
W9732000.27.. 16IL 2.50 ISO - 90
W9732000.28.. 16IL 3.00 ISO - 90

105
 Numerical Index

Order No. Page Order No. Page Order No. Page Order No. Page

16.. / L / N N/Q Q/W W

1630100016 96 N00 57520 92 Q21 44000.02.. 76 W00 50360.04.. 27
1630100536 96 N00 57530 92 W00 50420.04.. 27
1630100537 95 N00 57540 91 Q36 18000.01.. 77 W00 50500.04.. 27
1630100537 96 N00 57552 92/94 Q36 24000.02.. 77 W00 50600.04.. 28
N00 57570 94 Q36 24000.04.. 77 W00 50600.08.. 28
5156074551 96 Q36 24000.05.. 77
Q09 13000.01.. 72 Q36 24000.06.. 77 W00 58060.06.. 26
L05 00020 94/95 Q09 18000.17.. 72 Q36 38000.07.. 77 W00 58120.06.. 26
L05 00030 94/95 Q09 44000.02.. 73 W00 58360.06.. 27
L05 00040 94/95 Q09 44000.03.. 73 W00 04120.01.. 26 W00 58420.06.. 27
L05 00050 96 Q09 44000.04.. 73 W00 04420.01.. 27 W00 58600.06.. 28
L05 00060 96 Q09 44000.13.. 73 W00 04600.01.. 28
L05 00070 94-96 Q09 44000.14.. 73 W01 24060.02.. 29
L05 00080 94/95 Q09 44000.15.. 73 W00 10120.02.. 26 W01 24120.02.. 29
Q09 44000.23.. 73 W00 10420.02.. 27 W01 24120.04.. 29
N00 55050 91 Q09 53000.16.. 73 W01 24200.02.. 29
N00 55060 91 W00 17120.02.. 26 W01 24360.02.. 30
N00 55070 91 Q12 18000.01.. 74 W00 17420.02.. 27 W01 24420.02.. 30
N00 55100 91 Q12 18000.02.. 74 W01 24420.04.. 30
N00 55110 91 Q12 18000.03.. 74 W00 24060.02.. 26 W01 24600.04.. 31
N00 55120 91 Q12 18000.04.. 74 W00 24060.04.. 26 W01 24600.08.. 31
N00 55130 91 Q12 18000.10.. 75 W00 24120.02.. 26 W01 24600.75.. 33
N00 55140 91 Q12 18000.11.. 74 W00 24120.04.. 26 W01 24600.90.. 33
N00 55180 91 Q12 18000.12.. 74 W00 24200.02.. 26 W01 24940.04.. 32
N00 55550 91 Q12 18000.13.. 74 W00 24360.02.. 27
N00 55560 91 Q12 18000.14.. 74 W00 24360.04.. 27 W01 34060.02.. 29
N00 55570 91 Q12 18000.31.. 75 W00 24420.02.. 27 W01 34060.04.. 29
N00 55580 91 Q12 18000.32.. 75 W00 24420.04.. 27 W01 34120.02.. 29
N00 55700 91 Q12 18000.33.. 75 W00 24500.02.. 27 W01 34120.04.. 29
N00 55710 91 Q12 18000.34.. 75 W00 24600.04.. 28 W01 34200.02.. 29
N00 55800 91 Q12 18000.36.. 75 W00 24600.08.. 28 W01 34360.02.. 30
N00 55810 91 W01 34360.04.. 30
N00 55820 91 Q12 32000.05.. 74 W00 34060.02.. 26 W01 34360.34.. 31
N00 55890 91 Q12 32000.06.. 74 W00 34060.04.. 26 W01 34360.35.. 31
N00 55900 91 Q12 32000.07.. 74 W00 34120.02.. 26 W01 34420.02.. 30
Q12 32000.08.. 74 W00 34120.04.. 26 W01 34420.04.. 30
N00 56010 91 Q12 32000.09.. 74 W00 34200.02.. 26 W01 34600.04.. 31
N00 56020 91/92 Q12 32000.15.. 75 W00 34200.04.. 26 W01 34600.08.. 31
N00 56030 91/92 Q12 32000.16.. 75 W00 34360.02.. 27 W01 34600.75.. 33
N00 56040 92/94 Q12 32000.17.. 75 W00 34360.04.. 27 W01 34600.90.. 33
N00 56050 93 Q12 32000.18.. 74 W00 34420.02.. 27 W01 34940.04.. 32
N00 56100 93 Q12 32000.19.. 74 W00 34420.04.. 27
N00 56110 93 Q12 32000.20.. 74 W00 34500.02.. 27 W01 42060.02.. 29
N00 56120 93 Q12 32000.38.. 75 W00 34500.04.. 27 W01 42060.04.. 29
N00 56200 93 Q12 32000.41.. 75 W00 34600.02.. 28 W01 42120.04.. 29
N00 56210 93 Q12 32000.42.. 75 W00 34600.04.. 28 W01 42360.02.. 30
N00 56300 93 Q12 32000.43.. 75 W00 34600.08.. 28 W01 42360.04.. 30
N00 56400 93 Q12 32000.52.. 74 W01 42360.34.. 31
N00 56410 93 Q12 32000.53.. 74 W00 42060.02.. 26 W01 42420.02.. 30
N00 56650 92-95 W00 42060.04.. 26 W01 42420.04.. 30
N00 56750 92/95 Q12 44000.21.. 74 W00 42120.02.. 26 W01 42600.04.. 31
N00 56770 92/95 Q12 44000.22.. 74 W00 42120.04.. 26 W01 42600.08.. 31
N00 56850 94/95 Q12 44000.23.. 74 W00 42200.02.. 26 W01 42600.75.. 33
Q12 44000.24.. 74 W00 42200.04.. 26 W01 42600.90.. 33
N00 57190 95 Q12 44000.25.. 74 W00 42360.02.. 27 W01 42940.04.. 32
N00 57200 93 Q12 44000.84.. 75 W00 42360.04.. 27
N00 57210 93 Q12 44000.85.. 75 W00 42420.02.. 27 W01 50060.04.. 29
N00 57220 93-95 Q12 44000.86.. 75 W00 42420.04.. 27 W01 50120.04.. 29
N00 57230 93 Q12 44000.87.. 75 W00 42500.02.. 27 W01 50360.04.. 30
N00 57240 93 W00 42500.04.. 27 W01 50420.04.. 30
N00 57250 93 Q15 18000.01.. 76 W00 42600.02.. 28 W01 50600.04.. 31
N00 57260 93-95 Q15 18000.02.. 76 W00 42600.04.. 28 W01 50600.08.. 31
N00 57270 93/96 Q15 32000.03.. 76 W00 42600.08.. 28 W01 50600.75.. 33
N00 57280 93 Q15 32000.04.. 76 W01 50600.90.. 33
N00 57300 93/94 W00 50060.02.. 26
N00 57320 93 Q21 24000.03.. 76 W00 50060.04.. 26 W01 58060.06.. 29
N00 57340 93 Q21 24000.04.. 76 W00 50120.02.. 26 W01 58120.06.. 29
N00 57410 93 Q21 32000.05.. 76 W00 50120.04.. 26 W01 58600.06.. 31
N00 57430 93 Q21 32000.06.. 76 W00 50200.04.. 26
N00 57510 92 Q21 44000.01.. 76 W00 50360.02.. 27 W04 22180.01.. 34
106
 Order No. Page Order No. Page Order No. Page Order No. Page

W W W W
W04 22480.01.. 35 W28 58000.08.. 39 W30 04060.30.. 48 W30 26060.02.. 48
W04 22600.01.. 35 W28 58010.08.. 41 W30 04060.31.. 52 W30 26060.04.. 48
W28 58020.06.. 43 W30 04120.02.. 48 W30 26060.05.. 48
W04 34180.02.. 34 W28 58030.08.. 45 W30 04120.03.. 48 W30 26060.08.. 48
W04 34180.04.. 34 W30 04120.04.. 48 W30 26060.31.. 52
W04 34480.02.. 35 W28 65010.08.. 41 W30 04120.30.. 48 W30 26120.02.. 48
W04 34480.04.. 35 W28 65010.12.. 41 W30 04120.31.. 52 W30 26120.04.. 48
W04 34600.02.. 35 W30 04120.32.. 54 W30 26120.05.. 48
W28 72010.12.. 41 W30 04120.39.. 52 W30 26120.08.. 48
W04 42180.02.. 34 W30 04200.02.. 48 W30 26120.31.. 52
W04 42180.04.. 34 W29 04010.02.. 40 W30 04200.03.. 48 W30 26120.32.. 53
W04 42480.02.. 35 W30 04360.02.. 49 W30 26120.39.. 52
W04 42480.04.. 35 W29 10010.04.. 40 W30 04360.03.. 49 W30 26200.02.. 48
W04 42600.02.. 35 W29 10110.04.. 46 W30 04360.04.. 49 W30 26200.05.. 48
W29 10130.04.. 47 W30 04420.02.. 49 W30 26360.02.. 49
W04 50180.04.. 34 W30 04420.03.. 49 W30 26360.04.. 49
W04 50480.04.. 35 W29 18010.04.. 40 W30 04420.04.. 49 W30 26360.05.. 49
W04 50600.04.. 35 W29 18110.04.. 46 W30 04420.30.. 49 W30 26420.02.. 49
W04 58180.06.. 34 W29 18130.04.. 47 W30 04500.02.. 49 W30 26420.04.. 49
W04 58480.06.. 35 W30 04500.03.. 49 W30 26420.05.. 49
W29 24000.04.. 38 W30 04600.03.. 50 W30 26500.05.. 49
W05 42180.02.. 34 W29 24010.04.. 40 W30 04660.03.. 50 W30 26600.05.. 50
W05 50180.04.. 34 W29 24010.08.. 40 W30 04720.03.. 50 W30 26600.08.. 50
W05 50480.04.. 35 W29 24020.04.. 42 W30 04820.02.. 51 W30 26660.05.. 50
W05 58480.06.. 35 W29 24020.08.. 42 W30 04820.03.. 51 W30 26720.05.. 50
W29 24030.04.. 44 W30 04820.04.. 51 W30 26820.02.. 51
W27 12000.04.. 36 W29 24110.04.. 46 W30 04820.32.. 53 W30 26820.04.. 51
W27 12010.04.. 36 W29 24130.04.. 47 W30 04830.02.. 51 W30 26820.05.. 51
W27 12100.04.. 37 W30 04830.03.. 51 W30 26820.32.. 53
W27 20000.04.. 36 W29 34000.04.. 38 W30 04990.02.. 54 W30 26940.05.. 55
W27 20010.04.. 36 W29 34000.08.. 38 W30 04990.03.. 54 W30 26990.02.. 54
W27 20100.04.. 37 W29 34010.04.. 40 W30 04990.04.. 54 W30 26990.04.. 54
W29 34010.08.. 40 W30 26990.05.. 54
W28 10000.02.. 39 W29 34020.04.. 42 W30 14060.02.. 48
W28 10010.02.. 41 W29 34020.08.. 42 W30 14060.04.. 48 W30 44060.08.. 48
W28 10030.02.. 45 W29 34030.04.. 44 W30 14060.08.. 48 W30 44120.08.. 48
W29 34030.08.. 44 W30 14060.30.. 48 W30 44360.08.. 49
W28 17000.04.. 39 W29 34110.04.. 46 W30 14060.31.. 52 W30 44420.08.. 49
W28 17010.04.. 41 W29 34130.04.. 47 W30 14120.02.. 48 W30 44600.08.. 50
W28 17030.04.. 45 W30 14120.04.. 48 W30 44660.08.. 50
W29 42000.04.. 38 W30 14120.08.. 48 W30 44720.08.. 50
W28 24000.02.. 39 W29 42000.08.. 38 W30 14120.30.. 48
W28 24000.04.. 39 W29 42010.04.. 40 W30 14120.31.. 52 W32 03150.04.. 56
W28 24010.04.. 41 W29 42010.08.. 40 W30 14120.32.. 53 W32 03450.04.. 57
W28 24010.08.. 41 W29 42020.04.. 42 W30 14120.39.. 52 W32 03600.04.. 59
W28 24020.04.. 43 W29 42020.08.. 42 W30 14200.02.. 48 W32 03990.04.. 58
W28 24030.04.. 45 W29 42030.04.. 43 W30 14200.04.. 48
W29 42030.08.. 43 W30 14360.02.. 49 W32 13150.04.. 56
W28 34000.02.. 39 W29 42110.04.. 46 W30 14360.04.. 49 W32 13150.08.. 56
W28 34000.04.. 39 W29 42130.04.. 47 W30 14420.02.. 49 W32 13450.04.. 57
W28 34000.08.. 39 W30 14420.04.. 49 W32 13600.04.. 59
W28 34010.04.. 41 W29 50000.04.. 38 W30 14500.02.. 49 W32 13600.08.. 59
W28 34010.08.. 41 W29 50000.08.. 38 W30 14500.04.. 49 W32 13940.04.. 58
W28 34020.04.. 43 W29 50010.04.. 40 W30 14600.02.. 50 W32 13990.04.. 58
W28 34030.04.. 45 W29 50010.08.. 40 W30 14600.04.. 50
W29 50020.04.. 42 W30 14660.02.. 50 W32 18150.04.. 56
W28 42000.02.. 39 W29 50030.04.. 44 W30 14660.04.. 50 W32 18150.08.. 56
W28 42000.04.. 39 W29 50030.08.. 44 W30 14660.33.. 50 W32 18450.04.. 57
W28 42000.08.. 39 W29 50110.04.. 46 W30 14720.04.. 50 W32 18600.04.. 59
W28 42010.04.. 41 W29 50130.04.. 47 W30 14800.04.. 50 W32 18600.08.. 59
W28 42010.08.. 41 W30 14820.02.. 51 W32 18940.04.. 58
W28 42020.04.. 43 W29 58000.08.. 38 W30 14820.04.. 51 W32 18990.04.. 58
W28 42030.04.. 45 W29 58010.08.. 40 W30 14820.32.. 53
W29 58020.08.. 42 W30 14830.02.. 51 W32 23150.04.. 56
W28 50000.04.. 39 W29 58030.08.. 44 W30 14830.04.. 51 W32 23150.08.. 56
W28 50000.08.. 39 W29 58130.08.. 47 W30 14940.04.. 55 W32 23450.04.. 57
W28 50010.04.. 41 W30 14990.02.. 54 W32 23600.04.. 59
W28 50010.08.. 41 W30 04060.02.. 48 W30 14990.04.. 54 W32 23600.08.. 59
W28 50020.04.. 43 W30 04060.03.. 48 W30 14990.08.. 54 W32 23940.04.. 58
W28 50030.04.. 45 W30 04060.04.. 48 W32 23990.04.. 58
107
 Numerical Index

Order No. Page Order No. Page Order No. Page Order No. Page

W W W W
W32 32150.04.. 56 W78 18990.04.. 66 W85 18000.01.. 85 W89 23000.02.. 88
W32 32150.08.. 56 W78 32070.04.. 66 W85 18000.02.. 85 W89 23000.03.. 88
W32 32450.04.. 57 W78 32070.08.. 66 W85 18000.06.. 70 W89 32000.01.. 88
W32 32600.04.. 59 W78 32990.08.. 66 W85 18000.08.. 70 W89 32000.02.. 88
W32 32600.08.. 59 W85 18000.16.. 71 W89 32000.03.. 88
W32 32940.04.. 58 W79 18040.04.. 67 W85 18000.17.. 71 W89 32000.04.. 88
W32 32990.04.. 58 W79 18060.02.. 67 W85 18000.18.. 71 W89 32000.05.. 88
W79 18060.04.. 67 W85 18000.19.. 85 W89 32000.06.. 88
W32 44150.08.. 56 W79 18060.08.. 67 W85 18000.20.. 85 W89 32000.07.. 88
W32 44450.08.. 57 W79 32040.04.. 67 W85 18000.21.. 70 W89 32000.08.. 88
W32 44600.04.. 59 W79 32060.02.. 67
W32 44600.08.. 59 W79 32060.04.. 67 W85 32000.02.. 85 W90 44000.01.. 89
W79 32060.08.. 67 W85 32000.03.. 85 W90 44000.03.. 89
W34 18660.04.. 60 W85 32000.04.. 85 W90 44000.04.. 89
W83 13000.01.. 81 W85 32000.05.. 85 W90 44000.08.. 89
W37 18600.04.. 60 W83 13000.02.. 81 W85 32000.19.. 70 W90 44000.09.. 89
W37 18600.08.. 60 W83 18000.01.. 68 W85 32000.20.. 70 W90 44000.10.. 89
W37 23600.04.. 60 W83 18000.03.. 68 W85 32000.21.. 71 W90 44000.11.. 89
W37 23600.08.. 60 W83 18000.09.. 81 W85 32000.22.. 71 W90 44000.12.. 89
W37 32600.08.. 60 W83 18000.10.. 81 W85 32000.23.. 70 W90 44000.13.. 89
W83 18000.13.. 68 W85 32000.24.. 70 W90 44000.14.. 89
W57 04040.04.. 61 W83 18000.15.. 68 W85 32000.26.. 71 W90 44000.15.. 89
W57 04120.02.. 61 W83 18000.16.. 68 W85 32000.27.. 71
W57 14040.04.. 61 W85 32000.28.. 85 W95 34000.01.. 89
W57 14120.04.. 61 W83 23000.01.. 81 W85 32000.29.. 85
W57 26040.04.. 61 W83 23000.02.. 81 W97 32000.01.. 90
W57 26120.04.. 61 W83 32000.01.. 80 W85 44000.01.. 84 W97 32000.02.. 90
W83 32000.02.. 80 W85 44000.02.. 84 W97 32000.03.. 90
W58 03120.04.. 62 W83 32000.03.. 68 W85 44000.03.. 84 W97 32000.04.. 90
W58 13120.04.. 62 W83 32000.05.. 68 W85 44000.04.. 84 W97 32000.05.. 90
W58 18120.04.. 62 W83 32000.13.. 68 W85 44000.08.. 84 W97 32000.06.. 90
W58 23120.04.. 62 W83 32000.14.. 68 W85 44000.09.. 84 W97 32000.07.. 90
W58 32120.04.. 62 W83 32000.15.. 81 W85 44000.10.. 84 W97 32000.08.. 90
W83 32000.17.. 81 W85 44000.14.. 84 W97 32000.09.. 90
W59 18050.04.. 63 W83 32000.18.. 69 W85 44000.15.. 84 W97 32000.10.. 90
W59 32050.05.. 63 W83 32000.19.. 69 W85 44000.16.. 84 W97 32000.11.. 90
W59 32050.08.. 63 W85 44000.17.. 84 W97 32000.12.. 90
W83 44000.01.. 80 W85 44000.25.. 70 W97 32000.13.. 90
W60 18060.02.. 63 W83 44000.03.. 80 W85 44000.26.. 70 W97 32000.14.. 90
W60 18060.04.. 64 W83 44000.04.. 80 W85 44000.27.. 71 W97 32000.15.. 90
W60 18120.02.. 64 W83 44000.05.. 80 W85 44000.28.. 71 W97 32000.16.. 90
W60 18120.04.. 64 W83 44000.06.. 80 W85 44000.29.. 70 W97 32000.17.. 90
W60 18200.02.. 64 W83 44000.08.. 80 W85 44000.30.. 70 W97 32000.18.. 90
W60 18360.02.. 65 W83 44000.09.. 80 W85 44000.32.. 71 W97 32000.19.. 90
W60 18360.04.. 65 W83 44000.14.. 68 W85 44000.33.. 71 W97 32000.20.. 90
W60 18420.02.. 65 W83 44000.15.. 68 W85 44000.34.. 85 W97 32000.21.. 90
W60 18420.04.. 65 W83 44000.16.. 68 W97 32000.22.. 90
W60 18500.02.. 65 W83 44000.17.. 68 W85 53000.01.. 84 W97 32000.23.. 90
W60 18500.04.. 65 W83 44000.18.. 81 W85 53000.02.. 84 W97 32000.24.. 90
W60 18600.02.. 64 W83 44000.19.. 81 W85 53000.03.. 84 W97 32000.25.. 90
W60 18600.04.. 64 W83 44000.20.. 69 W97 32000.26.. 90
W60 18990.02.. 65 W83 44000.21.. 69 W86 18000.01.. 87 W97 32000.27.. 90
W60 18990.04.. 65 W86 18000.02.. 87 W97 32000.28.. 90
W83 62000.01.. 81
W60 32060.04.. 64 W83 62000.02.. 81 W86 32000.01.. 86
W60 32120.02.. 64 W83 62000.03.. 81 W86 32000.02.. 86
W60 32120.04.. 64 W83 62000.04.. 81 W86 32000.03.. 86
W60 32120.08.. 64 W86 32000.04.. 86
W60 32360.04.. 65 W84 18000.01.. 83 W86 32000.06.. 86
W60 32360.08.. 65 W84 32000.01.. 82 W86 32000.07.. 86
W60 32420.02.. 65 W84 32000.04.. 82 W86 32000.08.. 86
W60 32420.04.. 65 W84 32000.05.. 82 W86 32000.09.. 87
W60 32420.08.. 65 W84 32000.06.. 82 W86 32000.10.. 87
W60 32600.02.. 64 W84 32000.07.. 83 W86 32000.11.. 87
W60 32600.04.. 64 W86 32000.12.. 87
W60 32990.02.. 65 W85 09000.01.. 70 W86 32000.13.. 87
W60 32990.04.. 65 W85 09000.03.. 70
W85 09000.05.. 71 W86 44000.01.. 86
W78 18070.02.. 66 W85 09000.06.. 71 W86 44000.02.. 86
W78 18070.04.. 66 W86 44000.03.. 86
108
The TTool
ool Program for Y
Program our Cutting Applications
Your

ls
ls ls
ls
TToooo TToooo
ingg eerrtt
ss ingg
in eerrtt
ss
ttaatt
in ttaatt Inss
Roo
R le
le Inss
In Roo
R le In ls
le
b
b ls
ls a
a b
b ls
d
d eexxaa T
T oooo In
Indd eexx
g
g TT oooo
In
In ingg
nnin ®
® nnin
in ®
®

TTuurr TTR RICIC TTuurr TTR RICIC

MEE ls
ls OM MEE ls
ls
KKO OM TToooo KO
K TToooo ss
ingg
in ignn
ss ingg
in ignn
ssig
mm ssig aa m
m
Dee
Ree
R
aa
ic D Dee ls
ls Ree
R ic D
ic ls
ls
eettrr
ic oooo ee t
trr TToooo
m
m n gg TT raa mm n
n g
g
PPaa
rraa ilillilin PPaa
r
Milil
lili
aadd
MM dd M
r
ree FF O
O h
h rreeaa FF O
O
TThh IN
IN TT IN
IN
ls
Too ls ls
ion Too g Too
cis ing
L Pre g, ling
®
am ® Ream
in
JE lin ril
Mil d D Re
d
rea , a
n art
Th pping Dih
Ta

0 0
2/0 4/0

앬 Rotating tools catalog 앬 JEL precision tools catalog 앬 Dihart reaming tools
Order # MMC60500100 Order # MMC60500107 Order # MMC60500090

ls
ls
TToooo
ingg
in eerrtt
ss
ttaatt Inss
Roo
R
b le
le
In
a
a b ls
ls
eexx TToooo
Indd
In gg
nnin
in ®®
TTuurr TTR RICIC
OM MEE ls
ls
KKO gg TToooo ss
min in ignn
ssig
aam Dee
RRee ic D
ttrric
ls
ls
e
e TToooo
aa rraam m
il
illilinngg
PP dd M M
rreeaa OO
TThh INFF
IN ls™ ol
ecia gra
l To
Sp
ols dT
oo
ls
Ea
sy
ta lo
g Inte lders
Ho cen
tric
To
®

e re RIC Ca Ec
ng e ET c ts S
®
g in M
rni En KO ead
s
ro d
u AB
Tu s to
m
ingH
Ne
wP 40
Cu Fa c M0 on
atr
® Qu
B
KU ®
rn
iTu
Un

K
HS r
aste
tm
Se

10/02

앬 Turning tools catalog 앬 Custom engineered tools catalog 앬 New Products catalog
Order # MMC60500114 Order # MMC60500103 Order # MMC60500104

109
 Notes

110
Notes

111
 KOMET International Agencies

Europe
Belgium Ireland Austria Slovenia
KOMET R. Cools N.V. KOMET (UK) Ltd. KOMET Werkzeuge Ges.m.b.H. KOMET Werkzeuge Ges.m.b.H.
Boomsesteenweg 456 Unit 4 Triton Park Wagramer Straße 173 Wagramer Straße 173
B-2020 Antwerpen Brownsover Road A-1220 Wien A-1220 Wien, Austria
Swift Valley
Telephone: ++32-3-2 37 97 87 Rugby CV21 1SG, Great Britain Telephone: ++43-1-2 59 22 04 Telephone: ++43-1-2 59 22 04
Telefax: ++32-3-2 16 33 16 ++43-1-2 59 22 12 ++43-1-2 59 22 12
Telex: 3 18 87 Telephone: ++44-17 88-57 97 89 Telefax: ++43-1-2 59 22 12-76 Telefax: ++43-1-2 59 22 12-76
Telefax: ++44-17 88-57 97 90 E-mail: [email protected] E-mail: [email protected]

Denmark Italy Poland Spain

Damstahl Tooling a/s KOMET Utensili S.R.L. AWEXIM AYMA HERRAMIENTAS, S.A.
Danmarksvej 28 Via Menotti Serrati 74 Andrzej Wodzinski Santa Lucia S/N
8660 Skanderborg I-20098 S. Giuliano Mil. Wochocka 1/3 seg. 8 E-20700 Zumarraga (Guipuzcoa)
PL-03-934 Warszawa Spain
Telephone: ++45-86 52 28 00 Telephone: ++39-02-9 84 02 81
Telefax: ++45-86 51 00 99 Telefax: ++39-02-9 84 49 62 Telephone: ++48-22-6 17 62 20 Telephone: ++34-943-72 92 04
E-mail: [email protected] E-mail: [email protected] Telefax: ++48-22-6 17 62 20 Telefax: ++34-943-72 92 05

Germany Croatia Portugal Czech Republic

KOMET Präzisionswerkzeuge KOMET Werkzeuge Ges.m.b.H. Ferramentas Gerais E Maquinas,Lda. Petr WINTER - servis
Robert Breuning GmbH Wagramer Straße 173 Av. do Conde, 5994 - Apartado 80 Mr. Petr Winter
Postfach 13 61 A-1220 Wien, Austria P-4466 S. Mamede de Infesta Suvorovova 29
D-74351 Besigheim Portugal 301 56 Plzen
Telephone: ++43-1-2 59 22 04 Telephone:
Telephone: ++49-71 43-3 73-0 ++43-1-2 59 22 12 Telephone: ++3 51-2-9 01 45 93 Telefax: ++42-0 19-7 44 63 70
Telefax: ++49-71 43-3 73-2 33 Telefax: ++43-1-2 59 22 12 76 Telefax: ++3 51-2-9 01 68 70 ++42-0 19-7 44 06 96
E-mail: [email protected] E-mail: [email protected]

Finland Luxemburg Sweden Turkey

PENTTI NURMI OY Fernand Jungers Square Tools AB 2M Cözüm
Hillakuja 14 B 129, route de Mondorf Box 9177 Ali Nihat Tarlan Cad. Kartel Sok.
FIN-28220 PORI L-3260 Bettembourg S-20039 Malmö Kaya Is hani No. 16/6
ISTANBUL - ICERENKÖY, TURKEY
Telephone: ++3 58-2-6 39 40 57 Telephone: ++3 52-52 03 06 Telephone: ++46-40-49 28 40
Telefax: ++3 58-2-6 39 40 52 Telefax: ++3 52-52 03 07 Telefax: ++46-40-49 19 95 Telephone: ++90-224-441 28 56
Telex: 3 39 86 Telefax: ++90-224-441 46 28
E-mail: [email protected]

France Netherlands Switzerland Hungary

KOMET S.A.R.L. Roco B.V. Utilis AG Präzisionswerkzeuge KOMET Werkzeuge Ges.m.b.H.
13, rue la Fayette Willem Barentszweg 16 Kreuzlingerstr. 22 Wagramer Straße 173
F-67024 Strasbourg-Cedex 1 NL-5928 LM Venlo CH-8555 Müllheim A-1220 Wien, Austria

Telephone: ++33-3-88 / 79 36 60 Telephone: ++31-77-3 23 14 00 Telephone: ++41-52-7 62 62 62 Telephone: ++43-1-2 59 22-04/ -12
Telefax: ++33-3-88 / 79 28 80 Telefax: ++31-77-3 23 14 04 Telefax: ++41-52-7 62 62 00 Telefax: ++43-1-2 59 22 12-76
E-mail: [email protected] E-mail: [email protected] E-mail: [email protected]

Great Britain Norway Slovack Republic

KOMET (UK) Ltd. Vema Brynildsrud Maskin AS Petr WINTER - servis
Unit 4 Triton Park Vestre Ne 2, Mr. Petr Winter
Brownsover Road Postboks 114, Suvorovova 29
Swift Valley N-13780 Nesbru 301 56 Plzen, Czech Repubilc
Rugby CV21 1SG Telephone:
Telephone: ++47-66 98 36 30 Telefax: ++42-0 19-7 44 63 70
Telephone: ++44-17 88-57 97 89 Telefax: ++47-66 98 36 40 ++42-0 19-7 44 06 96
Telefax: ++44-17 88-57 97 90 E-mail: [email protected]
E-mail: [email protected]

112
KOMET International Agencies

Outside Europe
Egypt Indonesia Malaysia Taiwan
ZAHRANCO, ENGINEERING TRADE PT Servitama Era Toolsindo GP System(Malaysia) Sdn Bhd Hung Chih Ltd., Co.
15, Ali Amer Str. · 6th Sector Tools & Workshop Equipment 19-1, Jalan Kenari 7 No. 37, Chung Cheng Road
Nasr City · Cairo, Egypt Jl. Cempaka Putih Tengah 17/F29 Bandar Puchong Jaya Tainan, Taiwan, R.O.C.
10510 Jakarta 47100 Puchong, Selangor
Telephone: ++20-2-2 75 43 46 Malaysia Telephone: ++8 86-6-2 25 22 16
Telefax: ++20-2-2 75 41 83 Telephone: ++62-21-4 24 35 64 Telefax: ++8 86-6-2 20 59 93
Telex: 2 10 57 YAZCO UN Telefax: ++62-21-4 22 93 80 Telephone: ++60-3-5 75 91 60
E-mail: [email protected] Telefax: ++60-3-5 75 97 40
E-mail: [email protected]

Argentina Iran Mexico Thailand

KOMET do Brasil, Ltda. SHIVEH TOLID Co. LTD. KOMET de Mexico, GP System (Thailand) Co.,Ltd
Rue Alexandre de Gusmao, 399 Sabz Bld. No. 32 Shangarf Str. S. de R.L. de C.V. 77 Soi Charansanitwong 49/1
Socorro, São Paulo - SP Yekom Rd. Mirdamad Blvd. Acceso „ A“ , No. 110 Bangbumru, Bangplad
CEP: 04760-020T, BRASIL Tehran 15489 Iran Parque Industrial Jurica, Bangkok 10700
76120, Queretaro, Qro. Mexico Thailand
Telephone: ++55-11-56 81-98 04 Telephone: ++98-21-2 22 25 05
Telefax: ++98-21-2 22 25 06 Telephone: ++52-442-218-25 44 Telephone: ++66-2-4 35 68 20/21
Telefax: ++55-11-56 81-98 02 Telex: 21 39 79 IRFS-IR Telefax: ++52-442-218-20 77 Telefax: ++66-2-4 35 68 22
E-mail: E-mail: [email protected] E-mail: [email protected]
[email protected]

Australia Israel Namibia USA

Rosler International PTY Ltd. ARNOLD TRADING Co., Ltd. A. Hüster KOMET of America, Inc.
P.O. BOX 696 P.O.B. 20180 Machinetool Company (Pty) Ltd. 2050 Mitchell Blvd.
Bayswater, Vic. 3153, Australia 6 Hamachtesh St. P.O. Box 5029 Schaumburg, IL 60193-4544
Ind. Area, Holon 58810, Israel Windhoek, Namibia USA
Telephone: ++61-3-97 38 08 89
Telefax: ++61-3-97 38 08 87 Telephone: ++9 72-3-5 58 13 13 Telephone: ++2 64-61-3 70 83 Telephone: ++1-8 47-9 23 84 00
Telefax: ++9 72-3-5 58 13 17 Telefax: ++2 64-61-22 76 96 ++1-8 47-9 23 84 80
Telex: 56-6 11 WNK Telefax: ++1-8 00-8 65/66 38
E-mail:
[email protected]

Brazil Japan New Zealand

KOMET do Brasil, Ltda. BIG DAISHOWA SEIKI CO., Ltd. Coulson Carbide Ltd.
Rue Alexandre de Gusmao, 399 3-3-39 Nishi-Ishikiri-Cho, Richmond Business Centre
Socorro, São Paulo - SP Higashi Osaka City 300 Richmond Road
CEP: 04760-020T, BRASIL Osaka 579, Japan P.O.Box 46-018
Herne Bay Auckland
Telephone: ++55-11-56 81-98 04 Telephone: ++81-7 29-82 82 77 New Zealand
Telefax: ++55-11-56 81-98 02 Telefax: ++81-7 29-82 83 70
E-mail: Telephone: ++64-9-3 60 32 59
[email protected] Telefax: ++64-9-3 78 89 96

China Canada Singapore

BRILLIANT Group Investment Ltd. KOMET of America, Inc. GP System (Singapore) Pte. Ltd.
Room 705, 706, Fu Dong Plaza 2050 Mitchell Blvd. Kalstar House
66 Xin Zhong Street Schaumburg, IL 60193-4544 8 Gul Avenue, Jurong
Dong Cheng District, Beijing USA Singapore 629652
postcode 100027, China
Telephone: ++1-8 47-9 23 84 00 Telephone: ++65-8 61 26 63
Telephone: ++86-10-65 92 01 95 ++1-8 47-9 23 84 80 Telefax: ++65-8 61 35 00
Telefax: ++86-10-65 92 01 87 Telefax: ++1-8 00-8 65/66 38 E-mail: [email protected]
E-mail: [email protected]

India Korea South Africa

KOMET Precision Tools India Pvt. Ltd. HiTECO High-Tech Machineries & Tools Masovia
Plot No. 121/B Corporation, Ltd. Engineering Suppliers CC
Bommsandra Indtl. Area 1 Na-502, 1254-10, Jungwang-dong, P.O. Box 2 65 85
Anekal Tk Shihung-si, Kyonggi-do, RSA-East Rand 1462
Bangalore-562 158, India Korea 429-450 Republic of South Africa

Telephone: ++91-81 10-3 48 21 Telephone: ++82-31-319-0860 Telephone: ++27-11-8 94 15 25

Telefax: ++91-81 10-3 44 95 Telefax: ++82-31-319-0861 Telefax: ++27-11-9 18 31 64
E-mail: [email protected] E-mail: [email protected]

113
KOMET
www.komet.com
KOMET of AMERICA, Inc.

2050 Mitchell Blvd.

Schaumburg, IL 60193-4544
MAIN OFFICE: 847/923-8400
FAX: 1-800-865-6638
CUSTOMER SERVICE/
ORDER ENTRY: 847/923-8480
[email protected]

KOMET of AMERICA, Inc.

Detroit Branch

6804 19½ Mile Road

Sterling Heights, MI 48314-1404
MAIN OFFICE: 586/997-0855
FAX: 586/997-0859

KOMET de MEXICO, S. DE R. L.
Acceso “A” No. 110
Parque Ind. Jurica
Querétaro, QRO. 76120
MEXICO
TELEFONO: 011 (52) (442) 218-2544
FAX: 011 (52) (442) 218-2077

MMC60500102-50-04/03 Printed in Germany

We reserve the right to make modifications