User Manual

Contents

4 Important Safety Information

9 Introduction
9 Package Contents
10 SHOWWX+™ HDMI Laser Pico Projector
11 Getting Started
11 Install Battery
12 Charge Battery
12 Power ON or OFF
13 Connect to a Video Source
13 How To Connect To An iPod, iPhone, or iPad
14 Connecting To HDMI Video Sources
15 Usage Guidelines
16 Advanced Controls
16 Menu Controls
16 Onscreen Menu
17 How To Adjust Brightness
17 How To Change Color Mode
17 How To Adjust Aspect Ratio
17 How To Adjust The Image Alignment
18 How To Adjust The Color Alignment
18 How To Reset Default Settings
19 How To Check Remaining Battery Life
19 How to Adjust The Green and Magenta Color
20 Troubleshooting
21 LED Status & Meaning
21 Customer Support
21 Register Your Product Online
21 Care & Maintenance
21 How To Clean The Window
21 How To Store & Transport
21 How To Use The Audio Jack
Important Safety Information
PLEASE REFER TO THE PRODUCT SAFETY INFORMATION GUIDE PROVIDED WITH YOUR To avoid risks associated with fire and explosion:
SHOWWX+ HDMI FOR IMPORTANT SAFETY INFORMATION. » Do not immerse the projector or battery in any liquid or allow either to get wet.
» Use only AC adapter and battery provided by MicroVision.
Intended Use Statement » Do not disassemble the battery or modify it in any way.
The SHOWWX+™ HDMI Laser Pico Projector is designed to operate with the MicroVision
» Do not attempt to short out the battery.
specified battery and MicroVision battery charger in a normal office and home environment
» Do not expose the battery to temperatures under -20°C or above 60°C.
within the following parameters:
» Do not crush the battery.
» Operating Temperature: 10° - 30° C, ( 50° - 86° F)
» Do not overcharge or rapidly discharge the battery.
» Storage Temperature: non-operating: - 20° - 60° C, (- 4° - 140° F) with battery
» Do not dispose of the battery by incineration or fire.
» Humidity: 10 - 85 % relative humidity (without condensation)
» Do not expose the projector or battery to direct sunlight in a closed space such
» Altitude: - 152 M - 4572 M (- 500 - 15,000 ft.)
as a vehicle.
Indicates a potentially hazardous situation, which To avoid risks of other injuries:
Warning if not avoided, may result in death or serious injury
and/or property damage.
» Do not handle a damaged or leaking battery pack.
» Do not handle a battery that has been handled in an inappropriate or dangerous manner.

AS WITH ANY BRIGHT LIGHT SOURCE, DO NOT STARE INTO THE BEAM. To avoid risks associated with driver distraction in a moving vehicle:
STARING INTO THE BEAM COULD CAUSE EYE DISCOMFORT AND IMPAIR VISION. » Do not use this projector in a moving vehicle in a manner that may distract the driver.

AS WITH ANY PRODUCT CONTAINING LASERS, DO NOT DISASSEMBLE THE PROJECTOR Indicates a potentially hazardous situation,
FOR ANY REASON. DISSASSEMBLING THE PROJECTOR MAY RESULT IN HAZARDOUS LASER
RADIATION EXPOSURE.
caution which if not avoided, may result in minor or moderate
injury and/or property damage.
EXCEPT FOR OPENING THE BATTERY DOOR AS DIRECTED IN THE USER GUIDE » Do not point the projected image at people, vehicles, or aircraft.
TO REPLACE THE BATTERY, THERE ARE NO USER SERVICABLE PARTS INSIDE » Risk of explosion if battery is replaced by an incorrect type.
THE PROJECTOR. » Dispose of used batteries according to the instructions contained within this guide.
For service or repair the product must be returned to an authorized repair facility. To avoid risks associated with environmental contamination:
See Customer Support section within this Guide for details. » Dispose of all system components in accordance with applicable government regulations.
To avoid risks associated with laser exposure: To avoid risks associated with tripping and falling:
» Not recommended for use by children under 14 unless supervised by an adult. » Position the charging cord and data cables so that they cannot be tripped over.
The SHOWWX+ HDMI is not a toy.
Photosensitive Seizure Warning
» Use of controls or adjustments or performance of procedures other than those A very small percentage of people may experience seizures or blackouts that are triggered
specified in this User Guide may result in hazardous laser radiation exposure. by exposure to light flashes or certain visual images including flashing lights or patterns
To avoid risks associated with hazardous voltage: that may appear in video games or other video images. Even people who have no history
» Do not modify this product in any way. of seizures or blackouts could experience “photosensitive epileptic seizures” while watching
Use only MicroVision approved replacement components. some video images.
» Do not use the AC adapter in a wet environment. Immediately stop watching projected video images and consult a physician if you experience
» Do not use with a damaged AC adapter. Replace damaged AC adapter prior to use. symptoms such as lightheadedness, altered vision, eye or face twitching, convulsions,
disorientation, confusion or momentary loss of awareness.
Taking the following precautions while watching video may help reduce
the risk of photosensitive epileptic seizures.
» Avoid use while tired or fatigued.
» Take frequent breaks.
» Look away from the screen from time to time.
» Sit further away from the projected image.

4 5
Safety Labels Regulatory Statements
The SHOWWX+™ HDMI Laser Pico Projector is a CLASS 2 LASER PRODUCT as defined FCC Declaration of Conformity
in IEC 60825-1, 2007-03. MicroVision has designed the SHOWWX+ HDMI to be safe This device complies with Part 15 of the FCC Rules. Operation is subject
for general use as a mobile projector. to the following two conditions: (1) this device may not cause harmful interference
IEC and CDRH Statements of Compliance (2) this device must accept any interference received including interference
The SHOWWX+ HDMI complies with IEC 60825-1, 2007-03. The device also complies with that may cause undesired operations. This applies to all product options.
21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50 FCC Radio Frequency Interference Statement
dated June 24, 2007. Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
The following safety labels are affixed at the factory.
against harmful interference in a residential installation. This equipment generates, uses and can
These labels contain important safety information. Do not remove them. radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
Located inside the SHOWWX+ HDMI. » Reorient or relocate the receiving antenna.
» Increase the separation between the equipment and receiver.
Do not attempt to disassemble
» Connect the equipment into an outlet on a circuit different from that to which
the SHOWWX+ HDMI.
the receiver is connected.
» Consult the dealer or an experienced radio/TV technician for help. To comply with FCC
RF exposure compliance requirements, a separation distance of at least 20 cm must be
maintained between the antenna of this device and all persons. This transmitter
must not be collocated or operating in conjunction with any other antenna or transmitter.
Caution: Changes or modifications to this equipment not expressly approved by manufacturer
could void the user’s authority to operate this equipment.
Canadian Compliance Statement
Complies with the Canadian ICES-003 Class B specifications.
Cet appareil numérique de la Classe B est conforme à la norme NMB-003 du Canada.
IEC and CDRH Statements of Compliance
Bottom View The SHOWWX+ HDMI complies with IEC 60825-1, 2007-03.
The device also complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant
to Laser Notice No. 50 dated June 24, 2007.
CE Statement
Laser Specifications This product complies with the requirements of the Low Voltage Directive 2006/95/EC
and the EMC Directive 2004/108/EC and carries the CE mark accordingly.
This device meets the following standards:
Laser EN60950-1:2006 – Safety of Information Technology Equipment
Color
Red Green Blue
EN60825-1:2007 – Safety of Laser Products
Laser AlGalnP Frequency doubled GaN EN55024: 1998 +A1:2001+A2:2003 – Immunity
Type laser diode IR laser diode laser diode EN55022: 2006 – Radiated & Conducted Emissions
Max CW 120 mW 72 mW 50 mW
Output
Wave- 632 nm 650 nm 526 nm 537 nm 440 nm 460 nm
length

6 7
 Introduction
Regulatory Statements Thank you for purchasing the MicroVision SHOWWX+™ HDMI
Other Compliance laser pico projector. The SHOWWX+ HDMI projects big, bright,
Some products may contain one or more of the following country marks on the Product Label, and colorful images that are always in focus, yet is small
which is located under the battery. Presence of the mark on the label indicates compliance with enough to fit in your pocket. Connect the SHOWWX+ HDMI
the applicable regulations for that country. to a video output-capable device to spontaneously share photos
and videos, presentations and more, in a big screen experience.
Australia/New Zealand (C-tick)
What is the PicoP® Display Engine?
Japan (PSC) The PicoP display engine is the world’s first ultra miniature
China (CCC) laser-based projector engine. It uses red, green and blue laser light
sources, electronics, optics, and a unique, tiny mirror-like device that
Directions for recycling battery
“paints” the image line-by-line on the projection surface.
Recycle battery in accordance with local laws. In the United States and Canada,
visit www.call2recycle.org or call 1-800-8-BATTERY (1-800-822-8837)
or 1-877-2-RECYCLE (1-877-273-2925) for the nearest recycling center.
Product Disposal
Package Contents
The SHOWWX+™ HDMI Laser Pico Projector should not be placed in household Please make sure you have received all items included with the product.
waste bins. Please check local regulations for information about the disposal For missing items contact customer support.
of electronic products in your area.
Made for iPod, iPhone, and iPad
“Made for iPod, iPhone, and iPad” mean that an electronic
accessory has been designed to connect specifically to iPod,
iPhone, or iPad, respectively, and has been certified by the
developer to meet Apple performance standards. Apple is not
responsible for the operation of this device or its compliance with safety and regulatory standards.
Please note that the use of this accessory with iPod, iPhone, or iPad may affect wireless performance.
Specifications subject to change without notice. SHOWWX+ HDMI SHOWWX+ HDMI SHOWWX+ HDMI SHOWWX+ HDMI
Copyright & Trademarks Rechargeable Battery Laser Pico Projector Wall Charger USB Wall Charger
©2011 MicroVision, Inc. All rights reserved. PicoP® and SHOWWX+™ are trademarks of MicroVision (US & Canada Only) (EU & Other Countries)
Inc. iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc., registered
in the U.S. and other countries. iPad is a trademark of Apple Inc. HDMI is a registered trademark
of HDMI licensing LLC. Other trademarks are the property of their respective owners.
Customer Support
To view the SHOWWX+ HDMI User Guide online go to http://www.microvision.com/showwx/hdmi/
support. For Technical Questions, service and support please visit us online at Micro-USB Cable SHOWWX+ HDMI SHOWWX+ HDMI
http://www.microvision.com/showwx/hdmi/support. Please have your Serial Number and purchase Cable for iPod, Micro-Micro
information available. You can find the Serial Number located under the battery. iPhone, and iPad HDMI Cable
Register your Product Online
Registering your new MicroVision product online is quick and easy. Your registration will allow us to
serve you better over the lifetime of your product. Being a registered owner also keeps you informed
of important product notifications and helps us continue to design products that meet your needs.
Please have the Product Serial Number when you register.
http://www.microvision.com/showwx/hdmi/register

Storage Pouch Quick Start Guide Product Information Guide Wrist Strap
(includes warranty card)

8 9
SHOWWX+™ HDMI Laser Pico Projector Getting Started
Install Battery

Micro HDMI Input

Window Down/Hot Key 2 1 Remove Battery Door

Up/Hot Key 1
1 2

2 2 Insert Battery

1
Power Button

Menu/Select Button

LED Indicators

Micro-USB/Power Input
3 Close Battery Door
Video Input

3.5mm Audio Jack » Make sure the projector is OFF and unplugged before replacing battery.
Wrist Strap Holder
» Do not force the battery in. Make sure the battery + / - symbols are lined up.

10 11
Charge Battery Connect to a Video Source
The SHOWWX+™ HDMI can connect to a variety of devices with video-out such as an iPad,
iPhone, iPod, tablet computer, laptop, cell phone, camera, and more. The following describes
the connectivity options available with the SHOWWX+ HDMI.

Cable Connect SHOWWX+ HDMI Included Sold Separately

SHOWWX+ HDMI iPod, iPhone, or iPad with Yes Yes

Component Cable for iPod, Component TV-out
iPhone, and iPad

SHOWWX+ HDMI Micro- Any device with an HDMI Yes Yes

1 Plug Wall Charger Into Outlet 2 Connect To Micro or Micro-Standard video out connection. Most Micro-Micro
Micro-USB/Power Input HDMI Cable standard HDMI and Mini HDMI
to Micro cables can be used.

SHOWWX+ HDMI VGA Dock Laptop and PC devices No Yes

To see compatible devices with the SHOWWX+ HDMI: http://www.microvision.com/showwx/hdmi/compatibility

How to Connect to an iPod, iPhone, or iPad

3 Orange LED: Battery charging
Green LED: Battery fully charged

Note:
» For the USB wall charger (EU & other countries) connect the USB cable to the charger
and follow the steps above.
» Allow for a minimum of 4 hours charging before first time use.
» The wall charger will not charge the battery while the SHOWWX+ HDMI is powered ON.
» The supplied battery is designed specifically for the SHOWWX+ HDMI and no other battery
1 Power on the projector 2 Connect the cable to the projector

should be used.

Power ON or OFF
Note: Do not have the SHOWWX+ HDMI connected to any video
device before turning ON.
Turning ON: Press and hold the button.
The blue LED will come on and the image will appear 3 Connect the cable to the iPod, iPhone, 4 Wait to see “Ready To Use” alert
in about 5 seconds. or iPad (already on)

Turning OFF: Press the button.

Note:
Note: » While connected to an iPod, iPhone, or iPad
» During startup the image will flash with a series of different colors. This is normal. the Audio Jack on the Apple device can also
be used.
» A blinking Blue LED indicates the unit is starting up. A solid Blue LED indicates
the unit is ready for use.
5 Select Picture or Video content » To see compatible devices with the SHOWWX+
and Press play on iPod, iPhone, HDMI visit http://www.microvision.com/showwx/
or iPad hdmi/compatibility

12 13
Connecting to HDMI Video Sources Usage Guidelines
The SHOWWX+ HDMI can connect to a variety of devices that provide HDMI video-out. There are two main factors to consider when using
A micro-to-micro HDMI cable is provided. HDMI-approved third party cables are available the SHOWWX+ HDMI.
supporting standard and mini to micro connectivity. SHOWWX+ HDMI is HDCP compliant
and as such can display rights managed (HDCP) content. To display content, if not automatic Ambient light
make sure the source device has TV/Video-Out set to “On” or “Enabled”. To learn if your HDMI » It is recommended to shut blinds, close curtains
video source devices is capable of TV/Video-Out and how to enable, refer to its User Guide. and turn lights down to make the room dark
To see compatible devices with SHOWWX+ HDMI visit http://www.microvision.com/showwx/ so the projected image looks the best.
hdmi/compatibility Distance from screen
» The projector distance from the screen will impact
the appearance of the image brightness.
The closer to the screen the brighter the image will appear.

The following is a guideline of what image sizes are possible under

various lighting conditions:

1 Connect the HDMI cable to the 2 Connect the HDMI cable directly
Complete Darkness
micro HDMI port on the projector into the HDMI output connector
on the Video-Out Device
Note: Depending on the host HDMI
connector type, may require standard,
mini or micro cable (micro provided).
Semi-Dark
Dimmed Lighting

Semi-Lit
Home / Office

3 Power on the projector 4 If not automatic, enable video

out from the source device 70”-100”

24”-36”
<12”

5 iPad 2 supports Video Mirroring via

optional Apple Digital Adapter (sold Note:
separately by Apple). Connect the Image diagonal is approximately equal to the distance from the projector to the screen.
SHOWWX+ HDMI using a standard
HDMI-to-Micro HDMI cable (sold
separately) to enable Video Mirroring
(what you see on the screen can be
displayed or projected) functionality.

14 15
Advanced Controls How To Adjust Brightness
Menu Controls The image brightness can be reduced for close distance viewing in darker environments.
The SHOWWX+ HDMI was designed as a plug-and-play device, however, some users may want
to make adjustments to the settings such as change colors, adjust aspect ratio, and adjust 1 Press the button to bring up the on screen menu.
brightness. The following information will help you understand how to fully operate
2 Use the or buttons to navigate to BRIGHTNESS and press .
the SHOWWX+ HDMI.
3 Select the desired setting and press to accept.
Hot Keys
The SHOWWX+ HDMI includes two hot keys to allow
the user to quickly adjust the image depending on
How To Change Color Mode
the type of content being shown. The SHOWWX+ HDMI has 3 color modes.
Color Mode: Color mode can be changed without Brilliant Colors: Bright and vivid colors (default setting).
going into the Menu screen by pressing the button Standard Colors: More accurate flesh tones and grey scales.
to change the color mode. Press the button to
cycle through the color modes. Inverted Colors: All colors are inverted. Useful for presentations with black
text on white backgrounds.
Gamma Mode: Gamma mode can be changed
without going into the Menu screen by pressing on 1 Press the button to bring up the on screen menu.
the button. Press the button to cycle through
the gamma modes. 2 Use the or buttons to navigate to COLOR MODE and press .

Note: The Color Mode hot key also includes the 3 Select the desired setting and press to accept.
ability to invert the image. Inverting the image may
improve the readability of certain images. Also,
if the content background is predominately white, How To Adjust Aspect Ratio
then inverting the image (e.g., white becomes black) will extend battery life.
The image may appear cropped or skinny. The aspect ratio may be different
from the video source device.

Onscreen Menu 1 Press the button to bring up the on screen menu.

The SHOWWX+ HDMI has an onscreen display to allow the user the ability to make advanced 2 Use the or buttons to navigate to aspect ratio and press .
changes to the projector. All settings changed by the user will remain even when powered off.
3 Select the desired setting and press to accept.

Brightness: High (default) / Medium / Low

Color Mode: Brilliant (default) / Standard / Inverted / Gamma How To Adjust The Image Alignment
Aspect Ratio: Widescreen (default) / Normal / Zoom The image may appear to be slightly fuzzy. Adjustment of the image alignment
System: Image Alignment / Color Alignment / Properties / Reset Defaults may be necessary.

1 Press the button to bring up the on screen menu.

2 Use the or buttons to navigate to SYSTEM and press .

3 Navigate to IMAGE ALIGNMENT and press .

4 Press the or buttons to adjust the image until all vertical lines appear sharp and clear.

16 17
How To Adjust The Color Alignment How to Check Remaining Battery Life
Users can adjust horizontal or vertical alignment of each individual color Follow these instructions to view how much battery life is remaining.
(red, green, and blue).
1 Press the button to bring up the on screen menu.
1 Press the button to bring up the on screen menu.
2 Use the or buttons to navigate to SYSTEM and press .
2 Use the or buttons to navigate to SYSTEM and press .
3 Use the or buttons to navigate to PROPERTIES and press .
3 Use the or buttons to navigate to COLOR ALIGNMENT and press .
4 Use the or buttons to navigate to BATTERY INFORMATION and press .
4 An image of a vertical and horizontal crossed in the middle will appear
in the center of the screen.
How to Adjust The Green and Magenta Color
5 Use the or buttons to select the desired color (Red Adjust, Green Adjust,
The image may appear to have green shadows or a magenta color when it should be white.
Blue Adjust) to adjust and press . Adjustment of the Green/Magenta color may be necessary
6 Use the or buttons to select either HORIZONTAL or VERTICAL ADJUSTMENT Auto Adjustment
and press .
1 Turn on the projector and let it run for 5 minutes.
7 Use the or buttons to move the selected color until a solid white line is visible
either vertically or horizontally. 2 Press the button to bring up the on-screen menu.

Note: 3 Use the or buttons to navigate to SYSTEM and press .

» When adjusting colors HORIZONTALLY use the Vertical line (top-bottom) as the reference.
» When you exit the configuration menu after image alignment it will take 10 seconds
4 Use the or buttons to navigate to GREEN/MAGENTA BAL and press .
for the normal image to appear. 5 Use the or buttons to navigate to AUTO and press .

Note:
How To Reset Default Settings Vertical magenta lines will appear. The lines will automatically adjust to white.
Once adjustment is done, the splash screen will appear after about 10 seconds.
To reset all user selectable settings to factory defaults.

1 Press the button to bring up the on screen menu. Manual Adjustment

2 Use the or buttons to navigate to SYSTEM and press . 1 Follow steps 1-4

3 Use the or buttons to navigate to RESET DEFAULTS and press . 2 Use the or buttons to navigate to MANUAL PATTERN or MANUAL VIDEO
and press .
4 Press the or buttons to select YES and press .

Manual Pattern: A grid image will appear. Manual Video: Requires content from a video
source device. Use of a photo when making adjustments is recommended.

3 Use the or buttons to adjust the grid pattern until all lines appear completely
white. Or, adjust until all green shadows or magenta highlights are gone from the photo.

4 Press the button to confirm. After 10 seconds of no activity, the splash screen
will reappear.

18 19
Troubleshooting LED Status & Meaning
Problem Cause Solution LED Status Meaning
The projector does Battery not inserted correctly. Make sure the battery is correctly inserted. Solid Blue SHOWWX+ is powered on
not turn on. Battery not charged. Make sure the battery is fully charged.
Blinking Blue SHOWWX+ is powering up
The projector colors look Different Color Mode may be Change to preferred Color Mode.
incorrect. selected. Solid Orange Battery is charging
The projector randomly turns The projector may be out of Make sure the projector is well ventilated and
off but the Blue LED stays on. the recommended operating within the operating temperature range. Turn off
Solid Green Battery is fully charged
range. for 5 minutes and restart.
Blinking Orange Battery is low
Not working with my iPod, Not securely connected, Make sure cable is securely connected at both
iPhone, or iPad
- OR –
ends and a “Ready to Use” message appears Blinking Red Temporary problem
on the projector.
No TV-out signal detected Solid Red System failure
Make sure you have pressed the play
button on the videos or picture controls.

Customer Support
The projector won’t turn off or System is frozen. Press and hold the Power button for 20 seconds.
on and the Blue LED stays on. If this does not work, remove battery.
Then re-insert and turn on.

I can’t connect to my laptop. SHOWWX+ HDMI VGA Dock Purchase the SHOWWX+ HDMI VGA Dock.
For Technical Questions, service and support please visit us online at
sold separately. http://www.microvision.com/showwx/hdmi/support Please have your Serial Number
and purchase information available. You can find the Serial Number located under the battery.
The projector doesn’t work Not all cell phones have Ensure your cell phone has HDMI connectivity
with my cell phone. HDMI video out capabilities. and refer to your cell phone.

The image looks a little fuzzy. Debris on Window, Clean the Window, Register your Product Online
- OR - -OR-
Registering your new MicroVision product online is quick and easy. Your registration will allow
Image is misaligned. Adjust Image Alignment.
us to serve you better over the lifetime of your product. Being a registered owner also keeps
The green LED keeps blinking The battery is not correctly Make sure battery is correctly inserted you informed of important product notifications and helps us continue to design products that
while charging. inserted in the SHOWWX+ into the SHOWWX+.
HDMI.
meet your needs. Please have the Product Serial Number when you register.
http://www.microvision.com/showwx/hdmi/register
The red LED is blinking. Out of operating range. Turn projector off. Remove battery. Re-insert
Temporary problem. and power on.

Battery doesn’t charge. Battery may not be capable Install new battery.
Care & Maintenance
of holding a charge.
How To Clean The Window
The red LED is constantly on System failure. Contact Customer Support. Fingerprints and other debris may impact the image quality.
even after trying to restart.
Keep the window clean for best image quality.
Part of the image has a green Green or Magenta color out Adjust the Green and Magenta color alignment.
or magenta shadow. of alignment. 1 Apply a non-abrasive camera lens cleaner to a soft, dry cloth.
I am not getting Audio To enable audio you will need On the Playbook home screen, tap on the gear
on my Playbook when to ensure audio settings symbol (settings key) in top right corner. Select 2 Lightly wipe the cleaning cloth over the window until clean.
connected to the projector. are correct. HDMI key from side menu. Ensure the HDMI audio
key is set to Off. Note: Do not attempt to use solvents or other harsh chemicals as it may damage the window.
Make sure cleaning cloth is free of dust or debris to avoid scratching the window.
My video is not showing all of Need to adjust the aspect On the Playbook home screen, tap on the gear
what I see on the Playbook. ratio. symbol (settings key) in top right corner. Select
HDMI and change aspect ratio to Fill.
How to Store & Transport How to Use the Audio Jack
Proper care should be taken to safely store The audio jack on the SHOWWX+ HDMI works
I am not getting audio on my HDMI manager may require Check the HDMI manager on your device to ensure and transport the projector. Please use the only when the Audio signal is combined with
Android smart phone. adjusting or your device does HDMI audio is set correctly. May require use of
not support audio routing. external speakers or headset (3.5mm jack), included storage pouch. Do not drop the the Video signal. The Audio Jack is for output
or compatible Bluetooth speakers. SHOWWX+ HDMI or spill liquids on it. only.

20 21
MicroVision Limited Warranty
MicroVision warrants that the following Products will be TO THE EXTENT PERMITTED BY LAW, THIS WARRANTY AND
free of defects in material and workmanship under normal THE REMEDIES SET FORTH HEREIN ARE EXCLUSIVE AND
use for the period stated below beginning on the date IN LIEU OF ALL OTHER WARRANTIES, REMEDIES AND
of purchase by the original purchaser (“Warranty Period”): CONDITIONS, WHETHER ORAL OR WRITTEN, STATUTORY,
EXPRESS OR IMPLIED. AS PERMITTED BY APPLICABLE LAW,
Product and Warranty Period
MICROVISION SPECIFICALLY DISCLAIMS ANY AND ALL
SHOWWX+ HDMI Laser Pico Projector STATUTORY OR IMPLIED WARRANTIES, INCLUDING, WITHOUT
One (1) year LIMITATION, WARRANTIES OF MERCHANTABILITY OR FITNESS
SHOWWX+ HDMI Accessories FOR A PARTICULAR PURPOSE. IF MICROVISION CANNOT
(including battery, AC adapter, cables) LAWFULLY DISCLAIM STATUTORY OR IMPLIED WARRANTIES
Ninety (90) days THEN TO THE EXTENT PERMITTED BY LAW, ALL SUCH
WARRANTIES SHALL BE LIMITED IN DURATION TO THE
If a valid warranty claim is received by MicroVision or its DURATION OF THE EXPRESS WARRANTY AND TO THE REPAIR
authorized service representative during the Warranty OR REPLACEMENT SERVICE AS DETERMINED BY MICROVISION
Period for a particular product MicroVision will, at its option, IN ITS SOLE DISCRETION.
either repair the Product, replace the Product or refund
the purchase price paid by purchaser for the defective FOR CONSUMERS, WHO ARE COVERED BY CONSUMER
Product. Repaired or replaced parts or Product may include PROTECTION LAWS OR REGULATIONS IN THEIR COUNTRY
new, reconditioned or re-manufactured parts and OF PURCHASE OR, IF DIFFERENT, THEIR COUNTRY OF
equipment, at MicroVision’s option, that are functionally RESIDENCE, THIS WARRANTY IS PROVIDED IN ADDITION
equivalent to the original Product. Repair or replacement TO ALL RIGHTS AND REMEDIES PROVIDED BY SUCH
of any parts or equipment does not extend the period CONSUMER PROTECTION LAWS AND REGULATIONS. THIS
of warranty provided for herein. Such repair, replacement WARRANTY DOES NOT EXCLUDE, LIMIT OR SUSPEND ANY
or refund shall be purchaser’s sole remedy in the event RIGHTS OF CONSUMERS ARISING OUT OF NONCONFORMITY
of MicroVision’s breach of this limited warranty. WITH A SALES CONTRACT. SOME COUNTRIES, STATES AND
PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION
Limitations and Exclusions: MicroVision does not warrant OF INCIDENTAL OR CONSEQUENTIAL DAMAGES OR ALLOW
that the Product or associated software will run error free LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY OR
or without interruptions. MicroVision does not warrant that CONDITION MAY LAST, SO THE LIMITATIONS OR EXCLUSIONS
the Product will work with any or all third party products. DESCRIBED HEREIN MAY NOT APPLY TO YOU. THIS WARRANTY
MicroVision is not liable for loss of data, loss of profit, GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO
cost to cover, indirect, incidental or consequential HAVE OTHER RIGHTS THAT VARY BY COUNTRY, STATE OR
damages. This limited warranty does not apply: (1) if any PROVINCE. THIS LIMITED WARRANTY IS GOVERNED BY AND
non-conformance in the Product is caused in whole or CONSTRUED UNDER THE LAWS OF THE COUNTRY IN WHICH
in part by; accident, immersion in water, neglect, misuse, THE PRODUCT PURCHASE TOOK PLACE.
alteration, modification, or enhancement of the Products
(2) to cosmetic damages such as scratches (3) to operation
outside of the environmental parameters outlined in the All costs associated with shipment to MicroVision for
Product Information Guide or User Guide (4) to use of the warranty service, including but not limited to freight,
Product for other than the specific purpose for which it was duties, insurance and customs fees are purchaser’s
designed (5) to damage caused by service performed by responsibility. MicroVision will pay the freight costs
anyone other that an authorized MicroVision service provider (duties, insurance, customs, taxes, VAT and any other
(6) to any use of the Product that is not in accordance with fees are purchaser’s responsibility) associated with the
the Product Information Guide or User Guide (7) to other return shipment to purchaser. The method of shipment
misuse or abuse of the Product. MicroVision will have will be at MicroVision’s discretion.
no obligations under this limited warranty for any
non-conformance of the Product as set forth above.

To take advantage of this warranty For Technical Questions, Service and Support
or to find the nearest MicroVision please contact MicroVision at:
authorized service center go to Phone: 1-866-333-3542
http://www.microvision.com/showwx/hdmi/support (Monday through Friday 6:00am PST – 5:00pm PST)
Email: [email protected]
 6222 185th Avenue NE
Redmond, WA 98052 USA
microvision.com

Model Number: M-1612-A

Copyright & Trademarks

©2011 MicroVision, Inc. All rights reserved.
PicoP® and SHOWWX+™ are trademarks of MicroVision Inc.
iPhone, iPod, iPod classic, iPod nano, iPod touch and iPad are trademarks
of Apple Inc., registered in the U.S. and other countries.
HDMI is a registered trademark of HDMI licensing LLC.

DA0131291-001