Scribd
Upload
69 views

Ampero II Stomp Firmware Release Note

The firmware update improves stability, fixes bugs, and optimizes performance of the Hotone Ampero II Stomp effects processor. Version 1.1.0 fixes issues with MIDI control and recognition, abnormal effect tones, and system latency. Previous versions addressed stability, transmission errors, volume control, I/O metering, and incorrect effect parameters and behaviors.

Uploaded by

Thiago Rodrigues Rocha
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as RTF, PDF, TXT or read online on Scribd
69 views

Ampero II Stomp Firmware Release Note

The firmware update improves stability, fixes bugs, and optimizes performance of the Hotone Ampero II Stomp effects processor. Version 1.1.0 fixes issues with MIDI control and recognition, abnormal effect tones, and system latency. Previous versions addressed stability, transmission errors, volume control, I/O metering, and incorrect effect parameters and behaviors.

Uploaded by

Thiago Rodrigues Rocha
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as RTF, PDF, TXT or read online on Scribd
You are on page 1/ 2

Hotone Audio Co., Ltd.

Ampero II Stomp
Firmware Release Note
Version 1.1.0
Released 7/29/2022
Notice

We recommend you to use with newest (V1.1.0) Ampero II Stomp software.

Improvements, Changes & Bug Fixes

1. Optimized DSP performance for reducing system overload


2. Compatible with Ampero Press 25kΩ edition
3. Optimized MIDI performance
4. Optimized volume knob control for reducing sudden volume change
5. Optimized system latency when using less effect modules
6. MIDI messages recognized by Ampero II Stomp cannot be correctly transferred via
MIDI OUT/THRU or USB jacks - FIXED
7. Unit cannot be controlled by some certain MIDI controllers - FIXED
8. Abnormal effect tone fixed: Marshell 50 and Marshell 50 Jump (AMP/PRE AMP)

Version 1.0.5
Released 5/31/2022
Notice

Since we optimized data transmission stability in this version, for best experience, we
recommend you to use with newest (V1.0.3) Ampero II Stomp software.

Improvements, Changes & Bug Fixes

1. Optimized hardware stability


2. Optimized data transmission stability while using with Ampero II Stomp software

Version 1.0.4
Released 5/17/2022
Improvements, Changes & Bug Fixes

1. Optimized hardware stability

Version 1.0.3
Released 2/11/2022
Notice
www.hotoneaudio.com
Hotone Audio Co., Ltd.

If your hardware version is higher than V1.0.0, please DO NOT downgrade to firmware
older than V1.0.3 to prevent unit malfunction.
You can check your hardware version in Global > About.

Improvements, Changes & Bug Fixes

1. Compatible with new version hardware

Version 1.0.2
Released 1/12/2022
Improvements, Changes & Bug Fixes

1. Optimized system performance


2. Optimized I/O meter accuracy
3. Optimized volume knob for smoother volume control
4. Now when connecting to any input/output jack, the corresponding I/O meter frame
will light up to indicate connection
5. USB audio output level is lower than normal – FIXED
6. Abnormal effects/effect parameters fixed: Behemoth M, Moo VCF Env, Chili Wah,
Match 30 Clean (AMP/PRE AMP), Emperor Drive (AMP/PRE AMP), Messe Bass
400 (AMP/PRE AMP), Tape Delay M, Tape Delay S, Reverse Delay, 2290 Mod,
2290 Ducker
7. When controlling some parameters by an external expression pedal, in some
cases, parameter value display and actual effect sound don’t match – FIXED
8. When switching Trail switch on/off repeatedly, system overload message may
occur – FIXED
9. In Global EQ menu, switching some frequency band switch on/off repeatedly may
cause unit output clip – FIXED
10. Other minor bug fixes

Version 1.0.1
Released 11/10/2021
Improvements, Changes & Bug Fixes

1. Optimized overall hardware stability


2. When controlling some parameters by an external expression pedal, in some
cases, expression range cannot be set properly – FIXED
3. When switching Sync switch on/off of time-based effects, in some cases, time-
based parameter range may go wrong – FIXED
4. Fixed prompt typos
5. Other minor bug fixes

Version 1.0.0
Released 11/5/2021

Initial Release

www.hotoneaudio.com

You might also like