Scribd
Upload
129 views2 pages

Ardrox AV 25

Uploaded by

Bowser Doska
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
129 views2 pages

Ardrox AV 25

Uploaded by

Bowser Doska
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Ardrox AV 25

Corrosion Inhibiting Compound

Description: Penetrating, water displacing, general purpose, corrosion inhibiting


compound (CIC). Forms a soft, waxy film.

Range of Use: Applied as a coating to protect metals commonly used in airframe


structures and in aerospace components from corrosion.

AV 25 can be used in all areas of the airframe on painted and


unpainted surfaces.

It is designed for the treatment of areas where a soft, lubricating film is


required, for example pulleys, control cables and other movable
components.

Application: AV 25 can be applied by dipping, brushing or spraying.


For maximum penetration capability and the most effective corrosion
inhibiting performance, spray application is recommended, however,
brush application is effective when applying AV 25 to specific areas or
components.

AV 25 can be sprayed using either the specifically designed ACS -


System (airmix application equipment), or the AAS - System (airless
application equipment).

Operating instructions and recommendations for using spray equipment


are given in the Technical Manual “Aircraft Corrosion Protection and
Control“ available from the local Chemetall Sales Office.

Safety Information: For safety precautions and information on the safe use of this
product please see: Material Safety Data Sheet for AV 25.

Relevant Specifications
and Approvals: Detailed information is available on the Chemetall website at:

www.aerospace.chemetall.com
Ardrox AV 25
Corrosion Inhibiting Compound

PHYSICAL PROPERTIES

Property Test Method Value

Flash Point: ASTM D 93 38 °C (100 °F) minimum


EN ISO 2719
Non-volatile Content: ASTM D 1644 35 % by weight minimum
EN ISO 3251
Density at 23°C (73 °F): EN ISO 12185 820 ± 20 kg/m 3
Coverage: Calculated 14 m 2/litre at 25 µm
Application Temperature: 15 to 30 °C (60 to 85 °F)
Storage Temperature: 5 to 30 °C (40 to 85 °F)
Shelf Life: 36 months

FILM PROPERTIES

Property Test Method Value

Colour: Visual Transparent, beige


Specific Film Weight: Weighing 25 g/m 2
Approximate Film Thickness: 25 to 50 µm
Drying Time at Ambient Temperature: 60 minutes approx.
Removable with solvent: AV 980 Yes

Salt Spray Test: ASTM B 117 On steel > 1000 h (at Ri 1)*
On 2024-T3 > 2000 h (at Ri 1)*
Humidity: DIN 500 17 On steel > 1000 h (at Ri 1)*

* Interpretation according to EN ISO 4628-3

Issue:2005-03-17
Supersedes issue of: 2002-09-13

® registered trademark

The above details have been compiled to the best of our knowledge on the basis of thorough tests and with
regard to the current state of our long practical experience. No liabilities or guarantees deriving from or in
connection with this leaflet can be imputed to us. Reproduction, in whole or in part, only with our express
permission.

You might also like