Scribd
Upload
10 views2 pages

Rezerviši 5

This document requests information needed to select a pump, including: - The liquid to be pumped and its properties - Required pumping capacity and pressure - Well/sump dimensions and depth - Discharge piping size and flange details - Pump column length and type of lineshaft lubrication - Accessories like suction piping, strainers, and special materials - Driver details including speed, coupling type, and electrical characteristics

Uploaded by

Lazar Tomic
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
10 views2 pages

Rezerviši 5

This document requests information needed to select a pump, including: - The liquid to be pumped and its properties - Required pumping capacity and pressure - Well/sump dimensions and depth - Discharge piping size and flange details - Pump column length and type of lineshaft lubrication - Accessories like suction piping, strainers, and special materials - Driver details including speed, coupling type, and electrical characteristics

Uploaded by

Lazar Tomic
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 2

1.

Liquid to be pumped: (Note: If


liquid is not clear water, the
following must also be
ascertained)
1.1 Foreign material present in
liquid (describe):
1.2 Specific gravity at pumping
temperature:
1.3 Vapor pressure at pumping
temperature:
1.4 Viscosity at pumping
temperature:
2. Pumping temperature:
3. Required capacity:
4. Required pressure at
centerline of discharge flange:

5. Pumping water level: (below


centerline of pump discharge
(static water level plus
drawdown))

6. Inside diameter of well or


sump: (Note: Well or sump must
be sufficiently straight or of
sufficient diameter to allow bowl
assembly and column to hand
free and plumb).)
7. Size of discharge: (inches)

7.1. Companion flange required?

8. Required length of column or


overall length of pump: (inches,
indicate which)
9. Lineshaft lubrication
arrangement (per below):
9.1. Open lineshaft (lubricated
w/ liquid pumped)
9.2. Enclosed lineshaft (oil
lubricated)
9.3. Enclosed lineshaft (injection
lubricated)
10. Suction pipe required?
10.1 Length
11. Strainer required?
11.1 Is it conical or basket?
12. Special material
requirements (describe):
12.1 If fluid is corrosive, list
satisfactory materials:
13. Type of driver
14. Speed of driver:
14.1. Gear ratio:
15. Self release coupling or
15.1. non reverse ratchet
16. Current characteristics
(phase)

16. Current characteristics (Hz)

16. Current characteristics (volts)

17. Other driver requirements:

You might also like