Data Sheet

102/103, 202/203, 302/303 Flanged Diaphragm Seal

FEATURES
  316L stainless steel top housing (standard)
  A thin PTFE gasket between the diaphragm/bottom
housing ensures a leak-tight, corrosion resistant seal
Continuous duty design prevents loss of process fluid if
pressure instrument is removed or fails
Modular design allows for a suitable combination of
wetted and non-wetted materials for every application

TYPICAL USES
Oil and gas
Refineries
Chemical and petrochemical 100 Series 200 Series 300 Series
Water and wastewater
Biogas and Biodiesel
NACE compliant process (Sour gas separation)

SPECIFICATIONS
Connection Style: 102, 202, 302: Flanged
103, 203, 303: Flanged with flushing connection
Process Connection: ½, ¾, 1, 1½, 2 or 3 NPS
Instrument Connection: 1/4 or ½ NPT Female
Approvals: CRN
WETTED COMPONENTS Diaphragm Threaded Diaphragm Welded Diaphragm Clamped
To Top Housing - or Bonded To Top Between Upper & Lower
Diaphragm Bottom Housing Gasket flexible design Housing - eliminates Housing - flexible design for
See table 2 on page 2 See table 3 on page 2 PTFE leak path elastomeric diaphragms

NON-WETTED COMPONENTS
Top Housing Flange Rings KEY BENEFITS
316L SS (standard), Monel , titanium
®
Carbon steel • Flushing port provides ease of cleaning
• Dual containment for safety

TABLE 1 - FLANGE RATINGS

CARBON STEEL FLANGE STAINLESS STEEL FLANGE
Maximum Allowable Pressure (psi) Maximum Allowable Pressure (psi)
Temp. FLANGE CLASS Temp. FLANGE CLASS
(°F) 150 300 600 900 1500 2500 (°F) 150 300 600 900 1500 2500
<1000 285 740 1480 2220 3705 6170 <1000 275 750 1440 2160 3600 6000
200 260 675 1350 2025 3375 5625 200 230 600 1200 1800 3000 5000
300 230 655 1315 1970 3280 5470 300 205 540 1075 1615 2690 4480
400 200 635 1270 1900 3170 5280 400 190 495 995 1490 2485 4140
500 170 600 1200 1795 2995 4990 500 170 465 930 1395 2330 3880
600 140 550 1095 1640 2735 4560 600 140 440 885 1325 2210 3680
650 125 535 1075 1610 2685 4475 650 125 430 865 1295 2160 3600
700 110 535 1065 1600 2665 4440 700 110 420 845 1265 2110 2520
750 95 505 1010 1510 2520 4200 750 95 415 825 1240 2065 3440
800 80 410 825 1235 2060 3430 800 80 405 810 1215 2030 3380
850 65 270 535 805 1340 2230 850 65 395 790 1190 1980 3300
900 50 170 345 515 860 1430 900 50 390 780 1165 1945 3240
950 35 105 205 310 515 860 950 35 380 765 1145 1910 3180
10000 20 50 105 155 280 430 10000 20 355 710 1065 1770 2950

1 of 5

All specifications are subject to change without notice. ashcroft.com

All sales subject to standard terms and conditions. [email protected]
© 2021 Ashcroft Inc. 102_flanged_seal_ds_RevD_02-17-21 1.800.328.8258
Data Sheet
102/103, 202/203, 302/303 Flanged Diaphragm Seal

TABLE 2 - DIAPHRAGM MATERIALS TABLE 3 - BOTTOM HOUSING MATERIALS

Material Code 100 200 300 Notes Material Code Notes
304L SS C • • 304L SS C
316L SS S • • 316L SS S
904L SS F • 321 SS Q Available by request
Carpenter® 20 D • •
347 SS E Available by request
Gold Plated Temp. limits:
W •
316L SS -40°F to 400°F (-40°C to 204°C) 904L SS F Available by request
Halar®-coated
R • Carpenter 20 ®
D
Monel®
Hastelloy B ®
G • • Duplex 2205 Z Available by request
Hastelloy C-22
®
J • • Halar®-coated Monel® BH N/A with flushing connections
Hastelloy® C-276 H • • Hastelloy B®
G
200 series: must be ordered with
Monel® 400 P • • Hastelloy C-22
®
J
Monel® top housing option (XYM)
Nickel N • • Hastelloy C-276
®
H
Tantalum U • • Inconel® 625 W
Titanium Ti • Includes Titanium top housing
Monel® 400 M
Temp. limits:
Kalrez ®
K • • 30°F to 212°F (-1°C to 100°C) Nickel N
Max. pressure: 500 psi
Temp. limits: N/A with flushing connection
PTFE T • • Available only with 150-class flange
-40°F to 400° (-40°C to 204°C) PTFE T
Temp. limits: Max. pressure: 270 psi
Viton® Y • • -40°F to 350°F (-40°C to 204°C) Max. temperature: 150°F (66°C)
Max. pressure: 500 psi
N/A with flushing connection
Available only with 150-class flange
PVC V
Max. pressure: 75 psi
Max. temperature: 100°F (38°C)
N/A with flushing connection
PVDF 150-class flange (only)
KY
(Kynar®) Max. pressure: 200 psi
Max. temperature: 180°F (82°C)
Steel B
Tantalum-clad 316L SS SU N/A with flushing connection
Titanium Ti

2 of 5

All specifications are subject to change without notice. ashcroft.com

All sales subject to standard terms and conditions. [email protected]
© 2021 Ashcroft Inc. 102_flanged_seal_ds_RevD_02-17-21 1.800.328.8258
Data Sheet
102/103, 202/203, 302/303 Flanged Diaphragm Seal

TABLE 4 - FILL FLUIDS

Viscosity Variation
Fill Fluid Temperature Notes
(cSt at 70ºF (21ºC)) Code
Glycerin (food grade) 0°F to 400°F (-18°C to 204°C) 1,300 CG Direct-mounting only. Not for use with vacuum service

50 cSt Silicone -40°F to 500°F (-40°C to 260°C) 50 CK

10 cSt Silicone -40°F to 500°F (-40°C to 260°C) 10 DJ

For use with oxygen/
Halocarbon® 4.2 -70°F to 300°F (-57°C to 199°C) 4.2 CF oxidizing process media
Slytherm® 800 -40°F to 750°F (-40°C to 400°C) 10 HA High temperature applications

Syltherm® XLT -150°F to 500°F (-100°C to 260°C) 1.4 CC Low temperature applications

Calflo® AF -20°F to 600°F (-29°C to 316°C) 60 KF High temperature, silicone-free

Mineral Oil 10°F to 400°F (-12°C to 204°C) 75 MY

Neobee® M-20 (food grade) 5°F to 400°F (-15°C to 204°C) 9.5 NM

Silicone (food grade) -40°F to 500°F (-40°C to 260°C) 350 CZ

Distilled Water 40°F to 185°F (4°C to 85°C) 0.9 FJ

50/50 Glycerin/Water 15°F to 200°F (-9°C to 93°C) 30 GH

Propylene Glycol -50°F to 325°F (-46°C to 163°C) 54 CV

Ethylene Glycol 20°F to 325°F (-7°C to 163°C) 14 FK

50/50 Ethylene Glycol/Water -25°F to 190°F (-32°C to 88°C) 2.9 CT

80/20 Glycerin/Water 15°F to 225°F (-9°C to 107°C) 270 GR

95/5 Water/Propylene Glycol 40°F to 185°F (4°C to 85°C) 1.0 PY

3 of 5

All specifications are subject to change without notice. ashcroft.com

All sales subject to standard terms and conditions. [email protected]
© 2021 Ashcroft Inc. 102_flanged_seal_ds_RevD_02-17-21 1.800.328.8258
Data Sheet
102/103, 202/203, 302/303 Flanged Diaphragm Seal

ORDERING CODE Example: 50 1 02 C C 02T -XCK SE 300 RF

Process Connection Size
50 - ½ NPS 50
75 - ¾ NPS
10 - 1 NPS
15 - 1½ NPS
20 - 2 NPS
30 - 3 NPS
Diaphragm Type
1 - 100 Series metallic capsule diaphragm threaded into top housing 1
2 - 200 Series diaphragm welded (metallic) or bonded (elastomeric) to top housing
3 - 300 Series elastomeric diaphragm clamped between upper & lower housing
Bottom Housing Options
02 - Flanged process connection, without flushing connection 02
03 - Flanged process connection, with flushing connection
Diaphragm Materials (see table 2 on page 2)
C - 304L Stainless Steel C
Bottom Housing Materials (see table 3 on page 2)
C - 304L SS C
Instrument Connection Size
02T - ¼ NPT Female 02T
04T - ½ NPT Female
Options (if choosing option(s) must include an “X”) -X__
Fill Fluids (see table 4 on page 3 for more available fill fluids)
CG - Glycerin
CK - 50 cSt Silicone CK
CF - Halocarbon®
Optional Features
Flushing Port
AW - Single ½˝ flushing connections (03 bottom housing only)
DB - Dual ½˝ flushing connections (03 bottom housing only)
DK - Dual 1/4˝ flushing connections (03 bottom housing only)
PU - Pipe plug for flushing connection
Top Housing
YM - Monel® 400 top housing
Assembly/Hardware
DU - Instrument welded to top housing
LD - SS locking device
NH - SS instrument tag
SB - SS clamping bolts
SE - SS flange rings and bolts SE
Other
CD-5 - NACE compliance certificate
MQ - Positive material identification
6B - Cleaned for oxygen service
Flange Rating (see table 1 on page 1 for applicable pressure rating)
150 - ASME 150
300 - ASME 300 300
600 - ASME 600
900 - ASME 900
1500 - ASME 1500
2500 - ASME 2500 (Available by request)
Flange Types (contact Ashcroft for alternate flange types)
RF - Raised Face RF
RJ - Ring Joint
FF - Flat Face

When selecting an instrument, refer to the Min/Max Guide for compatibility with this diaphragm seal or scan the QR code to the right.

4 of 5

All specifications are subject to change without notice. ashcroft.com

All sales subject to standard terms and conditions. [email protected]
© 2021 Ashcroft Inc. 102_flanged_seal_ds_RevD_02-17-21 1.800.328.8258
Data Sheet
102/103, 202/203, 302/303 Flanged Diaphragm Seal

DIMENSIONS in [ ] are millimeters

For reference only, consult Ashcroft for specific dimensional drawings

102, 202, 302 - 102, 202,103, 203 – Flanged 1˝ (raised face 102, 202, 302 – Flanged Process Connection
Flanged Process Connection only) one piece bottom housing, with and with- - (raised face only) two piece bottom housing,
1
⁄2,˝ 3⁄4,˝ NPT out flushing connection 11⁄2,˝ 2,˝ - PVC, PTFE and Kynar
A A
A

B D
B B
“E” C
BOTTOM OF HOUSING
Nuts & flange by user
C TO CL OF 1⁄8 NPT Nuts, bolts & flange by user
FLUSHING PORT
Flange A B TYPES 103 & 203 ONLY
Flange A B
Flange A B C
Size Rating##
Rating in in mmmm in in mm mm Size Flange Rating# in. Amm in. B
mm in. C
mm
150 1 ⁄2
3 3.50 (89)[89] 2 ⁄162.94 (75) [75]
15 Flange A B C
150 Size1 Rating #
900 or 1500 in (149)
5-7/8 mm in mm 2-1/4in (57)mm Size Flange
Rating # in A
mm in B
mm in C
mm
1⁄2˝ 300 2500 6-1/4 (159) 2-7/8 (73)
⁄2˝ 300oror600
600 33⁄4
3.75 (95)[95] 3 3 (76) [76] 900 or 1500 5.88 [149] Size Rating # 5 in(127)mm25⁄16 in(59) mm
1˝ 2.88 only
[73] 2.25 [57] 11⁄2˝ 150 113⁄32 in(39) mm
900
900oror1500
1500 ⁄4
434.75 (121)[98] 33⁄163.19 (81) [81] 2500 6.25D [159] 103 & 203
Flange E 12˝
1
⁄2˝ 150
150 6 5(152)[127]
21⁄8 2.31
(54) [59]
19⁄16 1.41
(40) [39]
150
150 ⁄8
373.88 (98)[152] 213⁄162.81 (71) [71] Size Rating# in. mm in. mm102 & 203 only
3⁄4˝ 300 900 or 1500 3-3/8 (86) 2˝ 150 6 [150] 2.13 [55] 1.56 [40]
3/4˝ 300oror600
600 454.63
⁄8 (117)
[117] 3 3 (76) [76] 1 Flange 2500
D 3/8 (9) E
900oror1500
900 1500 515.13
⁄8 [130] 33⁄163.19 (81) [81]
(130) Size Rating # in mm in mm
900 or 1500 2
103, 203, 303 – 1˝ 3.38 [86] 0.38 [9] 103, 203, 303 – Flanged 11⁄2,˝ 2,˝ 3˝
2500
Flanged Process Connection (raised face only) one piece bottom housing with
1
⁄2,˝ 3⁄4˝ NPT (with flushing conection) 102, 202, 302 – Flanged Procees Connection flushing connection
A - one piece bottom housing
A
11⁄2,˝ 2,˝ 3˝ (raised face only) - all materials
except PVC, PTFE and Kynar
B A

1⁄4NPT B
flushing
connection
C
Nuts & flange by user B

1⁄4NPT
flushing Nuts, bolts & flange by user

Flange
Flange A
A B
B connection
Flushing connection
Size Rating# #
Rating in in mm mm in in mm mm Nuts & flange by user 1⁄8
1⁄4
NPT for 11⁄2"
NPT for 2" & 3"
150
150 ⁄2
313.50 (89) [89] 215⁄162.94 (75) [75]
1⁄2˝
Flange A B C
300 or 600 33⁄4 (95) 3 (76) SizeFlange
Rating # in
⁄2˝ 300 or 600 3.75 [95] 3 [76] Amm in Bmm in Cmm
1
Flange A B
900 or 1500 43⁄4 (121) 33⁄16 (81) Size Rating # in mm in mm
900 or 1500 4.75 [98] 13 3.19 [81] Size 150 #
Rating 5 in (127)
mm in mm in mm
150 37⁄8 (98) 2 ⁄16 (71) Flange A B C
3⁄4˝
150
300 or 600
3.88 (117)[152] 3 2.81 (76) [71]
45⁄8
150 31⁄2 (89) 215⁄16 (75) 11⁄2˝ 300150
or 600 615.00
⁄4 (159) 3
[127] 3.00 (76)
[76] 212.06
⁄16 (52)
[52]
3/4˝ Size
1⁄2˝ Rating #
300 or 600
in
33⁄4
mm
(95)
in 3mm in
(76)
mm 900 or 1500 7 (178)
300 or 600 4.63 [117] 3 [76] 1 ⁄2˝
1
300 or 600 6.25 [159] 3.00 [76] 2.06 [52]
900 or150
1500 45.00
3⁄4 [127]
(121) 2.38 33⁄[60]
16
1.50
(81) [38] 150 6 (152)
900 or 1500 7.00 [178] 3.00 [76] 2.06 [52]
102, 202,103, 203 – Flanged 1˝ (raised face 11⁄2˝ 300 150or 600 36.25
7⁄8 [159]
(98) 2.38213[60]
⁄16 1.50
(71) [38] 2˝ 300 or 600 61⁄2 (165) 311⁄32 (84) 23⁄8 (60)
150 6.00 [152] 3.53 [90] 2.38 [60]
only) one piece bottom housing, with and with- 3⁄4˝ 900or
300 or600
1500 47.00
5⁄8 [178]
(117) 2.80 3[71] 1.50
(76) [38] 900 or 1500 81⁄2 (215)
2˝ 300150
or 600 6.50 [165] 3.53 [90] 2.38 [60]
out flushing connection 150 6.00 [152] 2.94 [75] 1.34 [35] 71⁄2 (191) 33⁄32 (79) 27⁄32 (56)
A 2˝ 300 or 600 6.50 [165] 2.94 [75] 1.50 [38] 900
300or
or1500
600 88.50
1⁄4 [216] 33.53
(210) 3⁄16 [90]
(81) 272.38
⁄32 [60]
(57)
3˝ 150
900 or 1500 8.50 [216] 2.94 [75] 1.50 [38] 900 97.50
1⁄2 [191] 3.09 [78]
(241) 23
2.22
3
[56]
3001500
or 600 108.50
1⁄2 [216] 3 3.03
(267)
⁄32 (94)
[77] 22.15
⁄4 (70)
[55]
150 7.50 [191] 2.00 [51] 1.63 [41] 3˝
900 9.50 [241] 3.63 [92] 2.72 [69]
B 300 or 600 8.50 [216] 2.38 [60] 1.47 [37]
3˝ 1500 10.50 [267] 3.63 [92] 2.72 [69]
“E” 900 9.50 [241] 3.00 [76] 2.09 [53]
D BOTTOM OF HOUSING 1500 10.50 [267] 3.00 [76] 2.09 [53]
TO CL OF 1⁄8 NPT
C FLUSHING PORT
TYPES 103 & 203 ONLY
Flange A B C
Size Flange
Rating# in. Amm in. B mm in. C mm
Size Rating
150 # 4-1/4
in (100)
mm in mm in mm
1 300 or 600 5 (127) 2-9/16 (65) 1-23/32 (69)
150 4.25 [100]
1˝ 2.56 [65] 1.72 [69]
300 or 600 5 [127] 103 & 203 only
Flange D E 103 & 203 only
Size FlangeRating# in. mmD in. mm
E
Size 150
Rating # 1-5/8in (41) mm
1 300 or 600 3/8 (9) in mm
150 2
1˝ 1.63 [41] 0.38 [9]
300 or 600
5 of 5

All specifications are subject to change without notice. ashcroft.com

All sales subject to standard terms and conditions. [email protected]
© 2021 Ashcroft Inc. 102_flanged_seal_ds_RevD_02-17-21 1.800.328.8258