Scribd
Upload
75 views1 page

Western India Forgings Pvt. LTD.: Test Certificate

The document is a test certificate for forgings from Western India Forgings Pvt. Ltd. It provides details of the order, including part numbers and quantities. It also includes chemical composition test results, material characteristics such as hardness and tensile tests, non-destructive testing methods and results, microstructure analysis and a note certifying that the material meets requirements.

Uploaded by

Deepak Hole
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
75 views1 page

Western India Forgings Pvt. LTD.: Test Certificate

The document is a test certificate for forgings from Western India Forgings Pvt. Ltd. It provides details of the order, including part numbers and quantities. It also includes chemical composition test results, material characteristics such as hardness and tensile tests, non-destructive testing methods and results, microstructure analysis and a note certifying that the material meets requirements.

Uploaded by

Deepak Hole
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

TC No WIF/TC/23-24/3653

WESTERN INDIA FORGINGS PVT. LTD. Date 01-Oct-2023


Gat No. 163, Hissa No. 1, Sanaswadi, Nagar Road, Tal-Shirur, Dist- Pune, Pin-412208 Invoice No. DWIF/23-24/
Inv. Date

TEST CERTIFICATE
AS PER STD EN 10204:2004 TYPE 3.1
Customer Name : Ultra Corpotech Pvt.Ltd.- Bhosari PO No. 3230001500-ZDRM PO Date 20-Aug-2023

WIF Die No. Description Supply Condition Material Grade Heat No Size Qty.
FORGING CROSS 11.90 INCH OD C49690
Forged Normalised, As Per drg 8 Nos,
1992 HUBS AISI 4340 AISI 4340 Heat Code O S D
Tempered & shot Blasted
103189709 Rev. A Bar No 12914 D02222451 Rev. A Sr.No.- 01 TO 08

CHEMICAL COMPOSITION (% by Wt)


Element C Mn P S Si Cr Ni Mo H2 O2 N2 DI
Minimum 0.380 0.600 - - 0.150 0.700 1.650 0.200 - - - 6.000
Maximum 0.430 0.800 0.015 0.015 0.350 0.900 2.000 0.300 2.000 20.000 100.000 -
Observation 0.420 0.760 0.012 0.002 0.220 0.810 1.670 0.210 1.460 9.000 56.000 6.990

MATERIAL CHARACTERISTICS
Tensile Testing as per Notch Impact Test : RT
Heat Parameters Hardness ASTM A- 370 as per ASTM E-23 ASTM GRAIN Reduction
Treatment UTS YS (0.2%) El RA I II III Avg Notch SIZE Ratio
Unit HBW Mpa Mpa % % J J J J "V"
Normalising & Tempering
Minimum - Notch
7.00 6.71
HT Lot No Maximum 255 BHN - - - -
2 mm
CY-880 Actual 207-241 993.45 820.46 21.20 64.11 69 68 71 69 As Per ASTM E112

Non Destructive Examinations Remarks


Ultrasonic Examination is carried out and found acceptable as per reference Standard Inclusion Rating:Type (T/H) A(0.9/0.6);B(0.8/-0.5);C(-/-);D(1/0.5); As Per ASTM E45 Method A
Ultrasonic Examination
No : ASTM A-388/ acceptance as per QA/TDS/205 Rev.00 Macro Etch Test BETTER THAN C2R2S2 As Per ASTM E381
Microstructure Distribution of Ferrite and Pearlite
Magnetic Particle / Liquid Magnetic Particle Examination is carried out and found acceptable as per reference
Visual Examination Free from visual defects.
Penetrant Examination Standard No : ASTM E-709/ acceptance as per QA/TDS/205 Rev.00
Melting Practice EAF-LRF-VD-INGOT/FULLY KILLED

Note : We hereby Certify that the above figures are correct as contained in the records of the company.
Mechanical properties certified in the longitudinal direction at room temperature unless otherwise mentioned
Other : The above material conforms to the requirement of QA/TDS/205 Rev.00 Authorized Signatory
Metallurgist
F-MQC-09 / Rev. 01 / 16-Aug- 2019

You might also like