Scribd
Upload
816 views

Sensor Manual

Sensor ruchu

Uploaded by

g.rozanski89
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
816 views

Sensor Manual

Sensor ruchu

Uploaded by

g.rozanski89
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Ultranik UC01 Motion Detector

INSTALLATION MANUAL

PLEASE READ THIS MANUAL CAREFULLY AND ADJUST MOTION DETECTOR SETTINGS AS PREFERRED,
BEFORE MOUNTING LUMINAIRES
1 Introduc on
Ultranik® mo on detector with on/o func on

Ultranik UC01 mo on detector can turn on the light based on movement. With
this detector built in, light is automa y on when needed and o when not.

The light keeps o during day me even With movement and insu cient ambient If there is no more movement, the light
when movement is detected. (Ambient lux lux level, the light is triggered on by the turns o automa cally a er hold- me
level is above preset daylight threshold) detector. preset.
note: movement of random objects such as wind-blown things, smaller animals and even larger insects can sometimes be detected and lightning will be
triggered.

2 Detec on pa ern

3 Se ngs
Sens Hold- me Daylight sensor
Sensi vity can be adjusted by selec ng the Hold- me refers to the me period that the light Di erent daylight threshold can be preset on DIP
combina n on the DIP switches for di erent remains 100% on if no more movement is switches. Light will always turn on upon
applica ons. detected. Hold- me can be set on DIP switches. movement if daylight sensor is disabled.

1 2 3 4 5 6
I 100% I 5s I disable
II 75% II 90s II 50lux
III 50% III 5min III 10lux
IV 10% IV 15min IV 2lux

default se g: 100% default se g: 5s default se ng: disable


4 Ultranik UC01

Rated load /

Stand-by power <0.5W


Microwave frequency 5.8 GHz ±75MHz
<0.2mW
Maximum m 6m

5 Master-Slave control wiring

L
PE L
N N
MW L out MW L out

1 2
1 2

LUMINAIRE
LUMINAIRE

MASTER
MASTER

L
L

N
3 N
3 N
N

MW N out MW N out
1 2
1 2

LUMINAIRE
LUMINAIRE

SLAVE

L
SLAVE

N
3 N
3 N
N

1 2
1 2
LUMINAIRE

LUMINAIRE
SLAVE

L
SLAVE

N
3 N
3 N
N

Safety Notes:
• Installation should only be done by qualified electrician.
• Make sure no voltage while installation

You might also like