Chapter - 44
Chapter - 44
With the ever-increasing awareness of the harmful effects of chemicals on man and his
environment, the immediate need for sustainable, eco-friendly pest management has
been felt very strongly for providing an impetus to research and development of
microbial pesticides. The approach to pest management has seen a significant change
over the years from chemical control to integrated pest management, with emphasis
currently on bio-intensive integrated pest management. The shift in this paradigm is
the outcome of the search for eco-friendly pest-management strategies driven by the
impact of the ill-effects of injudicious use of chemical pesticides on human health and
environment. Among the different microbial agents developed and tested, bacteria,
viruses and fungi are considered promising for the management of insect-pests. Mass
production of the promising entomopathogens holds the key for promoting their large-
scale field use for insect-pest management. Mass production of the insecticidal bacterium
Bacillus thuringiensis and the entomopathogenic fungus Nomuraea rileyi are discussed
hereunder.
BACILLUS THURINGIENSIS
Bacillus thuringiensis (Bt) is the most successful microbial pesticide ever registered.
It is a gram-positive bacterium forming elliptical spores, contained in unswollen
sporangia, and a parasporal body (crystal) which appears in varied shapes in different
isolates, viz. bipyramidal, rhomboidal, rounded, etc. It is a complex species divisible
into subspecies and H-serotypes by serological and biochemical tests. Bt isolates/strains
produce several insecticidal toxins, two of which are used in agriculture. The relative
activity of each isolate against different insect species “spectrum activity” arrives partly
from the combined effects of the potencies of the varying concentrations of the different
insecticidal toxins that it produces. The d-endotoxin of different isolates of Bt can kill
different insect species or differ in the degree of their activity towards them. The
maximum toxin production can be achieved only by careful attention to the interaction
of fermentation conditions, media and the isolates involved, for example, no one medium
is best suited to all isolates.
Culturing on media
Bacillus thuringinsis (Bt) is easily multiplied on Luria-Bertani broth (LB), nutrient
agar and T3 agar media. Pure culture of Bt is maintained on the agar slants while it is
multiplied in the broth (medium without agar) of these media in flasks for testing
against insects. It is essential to store the pure culture of Bt in 10% glycerol at -80°C
and revive the cultures on Luria-Bertani agar (LA) slants when required. It is desirable
to restrict sub-culturing of Bt on media to two sub-cultures at 15-day intervals to avoid
occurrence of mutations in the cultures. After inoculation, the flasks are plugged with
sterile cotton and placed on a shaker at 30°C. Time taken for complete growth,
sporulation and lysis is 48–72 h depending on the strain/isolate. The Bt spores and
INTELLECTUAL PROPERTY RIGHTS 373
crystals are then recovered from the broth through centrifugation, the resultant pellet is
dried and milled to get a powder, which is used for bioassays.
Growth phases
After inoculation there is an initial lag phase followed by the exponential phase
during which intensive growth of the culture takes place. This phase persists up to the
16th–18th hour. At the end of this exponential phase, sporulation is initiated and the
cells enter into the stationary phase. Spores start appearing within the cells, together
with parasporal inclusions of the crystalline toxin. Sporulation is complete by 48–50
hours. This is followed by the lytic/ death phase wherein the cells are subject to lysis,
liberating spores and crystalline inclusions into the fermentation liquid. Nearly
90–98% of all spores and inclusions are liberated after 60–72 hours. The changes of
pH during the fermentation depend on the composition of the medium used. After
sterilization of the fermentation medium the pH should ideally be 6.8–7.2. After
inoculation, during the exponential phase, acids being formed from the saccharides,
pH will drop to 5.8–6.0 (after 10–12 hours), will rise again to about 7.5 (after 25
hours), further rise to 8.0 (after 30–35 hours) and ultimately to 8.8 (50–60 hours). The
pH during the fermentation period is maintained around 7.5 by the addition of 1N
sodium hydroxide/ 1N hydrochloric acid.
Medium Development
Whichever type of fermentation is chosen, nutrients must be provided, so that the
micro-organism can grow. Chosen nutrients markedly affect how fast the organism
grows, how much is produced and often, how infective the final product is. Nutrients
to be provided include a carbon source, e.g. glucose or molasses; nitrogen source, e.g.
soybean (Glycine max) meal or yeast extract, and some trace elements. The selection
of nutrients for cultivation depends on availability, price and suitability for organism.
The media used, however, represent only a small share of the costs of equipment,
servicing, and utilities required for operation.
Source of carbon
When formulating the nutrient medium, carbon is provided by mono, di, and
polysaccharides such as glucose, starch, molasses, etc. If their concentration is too
374 HANDBOOK OF INTEGRATED PEST MANEGEMENT
high, the pH will drop below 5.6–5.8, and acidity may prevent growth. It depends on
balancing the level of saccharides and the sources of nitrogen, in as much as Bt is
producing alkaline components from the nitrogen-bearing material and these can
neutralize the acidic products. As long as the medium is properly chosen, the initial pH
will drop from neutral to 5.8–6.0 and then will rise slowly toward 8.0- 8.3.
Sources of nitrogen
In the fermentation of Bt there are variegated sources of nitrogen; these can include
albuminous material containing vitamins and various factors such as yeast autolyzate,
yeast extract, dried yeasts, peptone, soya meal, maize (Zea mays) meal, maize extract,
residues from the production of alcoholic beverages, fish meal, etc.
Trace elements
Some ions which supplement nutrition are indispensable for the growth and
sporulation of Bt. Mostly, they are supplied in the form of MgSO4.7H2O, MnSO4.4H2O,
FeSO4.7H2O, ZnSO4.7H2O, CaCO3 (0.001–0.005%).
rapidly than the available surface area. Substrates like wheat (Triticum sp.) bran and
cotton (Gossypium sp.) seed meal have been employed successfully for multiplication
Bt through SSF.
Low-cost mass production of Bacillus thuringiensis var. kurstaki isolate on the
principle of solid-state fermentation can be successfully undertaken on a solid medium
containing wheat bran (150 g), molasses (3.6 g), yeast extract (0.72 g), potassium salts
(0.36 g of di-potassium hydrogen orthophosphate and potassium di-hydrogen phosphate)
and 250 ml distilled water. The medium (pH 7.2–7.5) is autoclaved in polythene covers
and dispensed aseptically into sterile plastic tubs after cooling. Seed culture of the
isolate (multiplied in nutrient broth) is added to the medium, mixed thoroughly and
closed air tight with a polythene sheet. The tubs are incubated for a period of 72 h at
30°C with intermittent aerations in a laminar airflow. After complete lysis, sterile distilled
water is added to the fermented medium and filtered through a muslin cloth. The filtrate
is centrifuged to remove the water-soluble b-exotoxin, which remains in the supernatant
that is discarded. The pellet is mixed with the filtration residue, shade-dried, powdered
and passed through a sieve to get the formulation.
NOMURAEA RILEYI
Nomuraea rileyi is an entomopathogenic fungus of cosmopolitan occurrence, primarily
infecting Lepidoptera and particularly the economically important, polyphagous noctuid
pests. Preliminary identification of N. rileyi is possible by looking for malachite-green
colouration on the insect surface. When viewed under the microscope, conidiophores
are seen bearing dense whorls of phialides, i.e. conidiogenous cells that are short-
necked. Conidia of N. rileyi are broadly ellipsoidal to cylindrical with a size of 3.5–4.5
× 2.0–3.1 µm. Nomuraca rileyi is a fastidious fungus and can be best multiplied on
Saboraud’s dextrose agar or maltose agar fortified with yeast extract. It is recommended
that cultures be stored under 10% glycerol in liquid nitrogen (–196°C) for long-term
preservation without genetic change. Slants overlaid with sterile mineral oil can be
held at 25°C for 6–12 months without loss of viability. However, regular passage through
host insect is essential for maintenance of virulence.
Solid-state fermentation is very common method for mass production of fungal
bio-agents under laboratory conditions. Various agricultural wastes and by-products
could be used for mass production, e.g. grain bran, wheat straw, wheat bran, wheat
bran-saw dust, wheat bran-peat, sorghum (Sorghum sp.) grain etc. The N. rileyi can be
cultivated on different media – sorghum, barley (Hordeum vulgare), wheat bran, etc.
Aerial conidia produced are indistinguishable in morphology and infectivity from those
produced on the surface of insect cadavers.
Sporulation is initiated at 7–8 days after inoculation and continues for 3–4 days. The
flasks are then transferred to refrigerator and stored for 4–5 days (sporulation continues
in the refrigerator). The substrate along with the fungus is the shade-dried and sieved
through a muslin cloth to obtain pure conidia of N. rileyi. Scale-up of production can
be undertaken in polypropylene bags plugged with non-absorbent cotton.