Scribd
Upload
140 views

Desoutter OpenProtocol Setup

This document provides instructions for connecting a CVIx2 or MultiCVIL2 controller to an Open Protocol Network. It outlines the requirements, including having an ethernet board and firmware version 2.5B or higher. It describes setting up the ethernet port in the controller parameters to use Open Protocol on port 4545. It also addresses questions about licensing, registration, trial periods, and differences for CVI3 controllers.

Uploaded by

Kilobyte202005
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
140 views

Desoutter OpenProtocol Setup

This document provides instructions for connecting a CVIx2 or MultiCVIL2 controller to an Open Protocol Network. It outlines the requirements, including having an ethernet board and firmware version 2.5B or higher. It describes setting up the ethernet port in the controller parameters to use Open Protocol on port 4545. It also addresses questions about licensing, registration, trial periods, and differences for CVI3 controllers.

Uploaded by

Kilobyte202005
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Procedure: CVIx2 – How to connect to Open Protocol Network

Products: Protocols – CVIx2 – How to connect to Open Protocol Network?

Description of the subject:


How to connect to Open Protocol Network on CVIx2 and MultiCVIL2.

Requirements:
- The controller must have an ethernet board.
- The controller must have a firmware version >= 2.5B (CVIxII)

Procedure:
Set up the controller:
- Go in PARAMETERS --> PERIPHERALS --> ETHERNET SOCK3 and select 'OPEN PROTOCOL' in the list.
T he default port is 4545 but you can change this value if needed .

Informa tion: Registration code cannot be sent to the MultiCVIL2 using Register CVI. Please enter the code directly in
the activation code screen of the CVIL2 M.

Wha t is the pa rt numbe r for the "Ope n Protocol license"?


The part numbers are :

Once the license is activated on a controller, it cannot be moved to another controller. The license is linked to the
controller.

How to registe r the functionality?


You can get RegisterCVI and its User Guide.Refer to Protocols “How to register the Open Protocol functionality”
document.

How can I ge t connected to Open Protocol ne twork while not registe red?
You can use the trial period to try the Open Protocol communication.
Follow the instructions to activate the function and enter OPENPROT as activation code.

My trial period has e xpired, wha t can I do?


After 60 days of trial period, you won't be able to get connected anymore to the Open Protocol network.
The only way to solve this issue is to register a legal activation code.

No registra tion needed on CVI3, OpenP is included by de fault in the controlle r with all firmwa re ve rsions.

You might also like