How to extract DMT (The Easy & low-cost way)

DMT 20.M EXTRACTION RECIPE

Hey everyone,

EDIT: 22/03/11 As we all know Mimosa Hostills (what was used for this original tek has
gone and probably will not be making a comeback to the U.K) A new source has quickly
emerged called ''Acacia Confusa' which has similar qualitys to Mimosa (SWIM has only just
started re-modifying this tek to work with Acacia, SWIM is still in the experiemtning stage
and are yet to perfect this technique to get maximum yeild, hopefully over the coming months
SWIM will update it with any tips and tricks like SWIM did when this tek was made for
mimosa)

Anyone outside the U.K who wishes to use this tek for Mimosa Hostills (very good tek when
used with Mimosa, swim mangaed to produce almost 0.3g out of 20g when perfecting the
technique) it's preety much exactly the same as this tek only it does not involve the ''defat
stage'' anyway here is the link to the original tek >>>>

http://www.mediafire.com/?lfw7dg6we18506g

This method is really easy, cost effective and only requires as little as 50g Acacia Confusa
Root Bark to start with!

Anyway here is the procedure >>>>>>>>

DMT 20.M EXTRACTION RECIPE

List of Ingredients & Apparatus >>>>>

Ingredients.....

1.Sodium Hydroxide i.e. Caustic Soda (aka Lye)

(minimum of 5g 4 extracting 20g of acacia confusa root bark)
2.Naphtha (Ronsonol Lighter Fluid / Newport Lighter Fluid 4 Zippos or a similar type)
3.Tap water
4 Acacia Confusa Root bark (20g minimum extraction)http://www.botanicalspirit.com/?
aref=3740 http://www.mh-uk.net/page34/page2/page2.html

Apparatus.....

1.568ml vinegar bottle (can be found @ any Supermarket, Sainsbury's do vinegar bottles like
these for only 10-20p)
2.12inch Plastic Pipettes (Found on Ebay)
3.Dust Mask (Found on Ebay)
4.Eye goggles (Found on Ebay)
5. 2 Glass McCartney Jars (I use big glass Pill Bottles) (Found @ Any Chemist store)
6.Small Glass Baking dish (Found at any Supermarkets or convenience store)
7.Glass Millie-litre Measuring Jug (Found@ Any Supermarket)
8.Filters (to carefully pour in your ingredients!) (Found @ Any Supermarket or Discount
Store)
9.2 Razor Blades (razor blade used for stanley knifes are ideal)

1.Take your glass vinegar bottle and make shure it is washed thoroughly throughout.

2.Now Measure 200ml of water in your glass measuring jug and pour this into your vinegar
bottle with one of your filters.

3 If you have a strong blender, powder down the Acacia Confusa bark so it has a wider
surface area. I use a 600w philips blender which does the job! (dont worry if you don't own a
blender you can get away with using just shreeded bark)

4.Filter in approximately 20g of (powdered or shreeded) Acacia Confusa Bark into your
bottle, and give a vigourous shake to strip down the bark (it should look like slightly red)

5.Now store this solution in a dark, undisturbed part of your working area at room
temperature overnight! (I use my bedroom cabinet and would store for 24hours, shaking every
now 4-6hours)

6.Once 24 hours has passed will now need to perform a defat

7.Measure out 50ml of Naphtha with your measuring Jug and then continue to add this to your
vinegar bottle using one of your small filters

8.Start shaking your solution for around 4-6 minutes (from what i have learnt the defat
removes the unwanted alkaloids, so be sure to give it a ruddy good shake)

9.Start running a hot water bath @ 60c (You may be limited to your resources! So SWIM
used a sink with the hot water tap which was filled up to the top with the hottest water it could
produce. This came out to around 45c – 51c which is satisfactory)

10.Place your solution in the hot water bath (this does help speed up the process of the defat,
after around 30 - 60 mins, both layers will have sperated)

11.Using your pipette python out the top layer of naphtha and store in one of your plastic pill
bottle (make sure to name it something like ''defat bottle'' and eventually dispose ofit in the
right way!)

12.Repeat steps 7 to 11 one more time

13.Now you have finished the defat stage, Measure out 5g of caustic soda and to add to your
solution using a filter (remember to use googles, gloves and dusk mask when dealing with
caustic soda, if u dont and get it on your hands it hurts, i know you heard it billion times, BUT
MAINTAIN SAFETY!!!)

14.Give the bottle a shake, it will turn from dark red to dark black

(The next procedure is exactly like the defat, only we will use our solvent to remove the NN-
DMT from the bark)

15.Measure out 50ml of Naphtha with your measuring Jug and then continue to add this to
your vinegar bottle using one of your small filters

16.Start running another hot water bath and place the bottle in your hot water bath for 30
minutes

17.After 30minutes have passed, take your solution and give it a shake for 2-4 minutes (being
careful not to create any froth on top of your solution, this is called ''emulsions'' which stops
the seperation of the solvent on top from the soupy liquid below)

18.Now run another hot water bath and place your solutuion init, waiting for around 1-2 hours
(or how ever long until the 2 layers have seperated)

19.After a couple hours, the layers will have seperated, Using your pipette python out the top
layer of naphtha and store in your other glass pill bottle (this is the sovlent that contains your
dmt)

20.Repeat steps 15 - 19 another 2 times

21.Now get your glass baking dish and pour the dmt into the dish (making sure no soupy dark
liquid is in the solvent)

22.Place your glass baking dish in the freezer for 24 hours

23.Remove your glass baking dish and python of the remaining solvent while being careful
not to python up any of the white crystals (the remaining solvent can be stored for use again
in steps 15-19)

24.Place your dish in a cool dark area i use my bedroom cabinet with a vinyl record case
placed on top so no oxygen or light gets to the crystals (you will notice if you crystals have
prolonged exposure to light and air they will become orangey / yellow)

25.After the crystals have fully dried, use a razor blade to scrape up the crystals and store
within a clean new dodgy bag (i would store this dodgy bag within another 2 dodgy bags
within 2 boxes stored in a dark area)

NOTES: SWIM has found from extracting 20g of Acacia Confusa using this tek swim can
produce a yeild of 0.1g (100mg) of white-ish pure NN-DMT xtals, swim has noticed and from
others experiences that acacia is slightly more stronger than mimosa, this might be down to
another present alkaloid in the acacia called ''NMT'' (even thruogh its present in mimosa
aswell)

Allthrough NN-DMT extracted from Acacia is slightly more powerful the downside is that
you only get 0.1g from 20g bark extraction, as apose to mimosa in which you could produce
0.2g from 20g bark extraction. If anyone out there using this tek and getting better results than
swim, please pm swim so can incorparate your method into the tek.

If you have any doughts about this or questions, please read this thread before you create a
new one or reply, it might be of a help to you http://psychonaut.com/post-42342-288...l?
f=36#p288148

Finally any questions people have, please feel free to ask! SWIM has tried to make this tek as
simple as possible aswell as including lots of detail and step by step instructions, Good luck
and Godspeed..........

METODO 2

How to make DMT

How To Make DMT

How To Make DMT

DMT stands for N,N-dimethyltryptamine. It is a semisynthetic

compound similar to psilocin(the hallucinogenic substance in
psilocybin) ins structure. The most common method of ingestion is
smoking. Soaked parsley leaves are the usual method of ingestion
although persons have dipped marijuana in it and said the
experience was fantastic. The following recipe can be performed in
the kitchen.

Recipe for DMT:

1. Mix thoroughly and dissolve 25 grams of indole with a pound of

dry ethyl ether in a 2000 ml flask(2 quart jar.)

2. Take an ice tray and fill with chipped or shaved ice. Cool
solution for about 35 minutes until it reaches 0 degrees C. At the
same time cool 50 ml dry oxalychloride to about 5 degrees below 0
C. in the same ice tray.

3. VERY slowly add the oxalychloride solution to the indole

solution. These two chemicals are highly reactive. Avoid boiling
over, contact with skin, and fumes.

4. Wait until all the bubbling has died down, then add a few
handfuls of table salt to the ice tray, to cool the solution
further. Label the solution "solution 1" and put it in the
freezer.

5. Cool 100 ml. of dry ethyl ether in a 500 ml. flask to 0 degrees
C. in a salted ice tray. At the same time cool an unopened bottle
of dimethylamine to 0 degrees C. in the same ice bath.
6. Open the seal of the dimethylamine bottle and slowly pour a
steady stream into the ether. Label "solution 2."

7. Very slowly and carefully add solution "1" and "2" together.

8. Now take the mixed solutions from the ice tray and bring up to
room temperature stirring the solution all the time. You should be
left with a solution that is almost clear. If it is still murky,
continue stirring until it becomes as clear as possible.

9. Now filter the solution to seperate the precipitate by suction.

<---Solution and Precipitate

------------
\ /<---Funnel / / <-- Rubber hose to
\ / and / / Vacuum source
\ / Filter/____/
\*****\ /*************{ }*****/ <--- Two hole
\****{ }*************{ }****/ rubber stopper
\ { } { } <-/--- Glass Tube
\{}{}/
|{}{}|
||
||
||
||
|__________________________|
Figure A.

10. Refilter with suction after pouring technical ether over the
precipitate.

11. Repeat filtering once more with ether, then twice with water.

12. Let this substance dry on a plastic or china plate.(do not use
metal) After drying, a solid material will be formed. Take
particles and place them in an 800 ml beaker.

13. Mix 100 ml. benzene with 100 ml. methyl alcohol. After this
mixture has been stirred, cover solid particles from step 12 with
about 1/2 inch of the solution and heat the beaker in water until
all solid material had dissolved. Add more solvent if
necessary.(Note: Do not place beaker in water bath directly over
the flame.)

14. After all solid material has dissolved, remove beaker from the
heat, and allow to cool. As it cools, small needle-shaped crystals
will appear. When this happens, try to pour off as much solvent as
possible without disturbing the crystals.
15. Place crystals in a 1000 ml flask and dissolve in
tetrahydrofurane.(Use only as much as absolutely necessary.) Label
this solution "A".

16. Slowly mix 200 ml. tetrahydrofurane and 20 grams lithium

aluminum hydride in a 500 ml flask, and label it solution "B".
(By the way, lithuim aluminum hydride ignites on contact with
moisture. Protect eyes and hands.)

17. Mix solutions "A" and "B" slowly, stirring constantly.

18. Prepare a water bath and heat solution for three hours,
stirring for four minutes every half hour. When not stirring, make
sure to use aspirator tube.
/ / <--- Rubber Tubing
---
\**{ }**/<---- One hole rubber stopper
/**{ }**\ and glass tubing
/{}\
/{}\
::
::
::
\ ~~~~~~~~~~~~~~~:_____________:~/
\______________________________/

Heat source

Figure B.

Place Figure B. flask at a higher level than Figure A. flask. Run

tube from Figure B. flask down to left side of figure A. flask,
replacing funnel with glass tubing. Disconnect right side tube
from vacuum source. This will be used as the aspirator tube.

19. When this is completed, allow the flask to remain at room

temperature for about 20 minutes. Then place in salted ice bath,
and cool to 0 degrees C. Add a small amount of chilled methanol,
stirring gently until solution appears murky.

20. Filter this murky solution through a paper filter in a funnel,

and collect the filtered liquid in a flask.

21. Add 100 ml. of tetrahydrofuran through the filter and collect
in the same flask. Now heat the solution in a water bath until
most of the tetrahydrofuran is evaporated and a gooey substance
remains.

22. Place little piles of this substance on a cookie tray and dry
with a heat lamp for three or four hours.
Well, after all that you now have DMT. Was it worth it? To ingest,
crumble a small quantity with parsley or mint, and smoke. Do not
inject. Do not mix with tobacco.