Scribd
Upload
104 views1 page

9f - Fact Sheet Product Specifications

The document summarizes the performance specifications of the 9F.04 heavy duty gas turbine from GE. It can provide a combined cycle efficiency of more than 60% with low NOx emissions of 15 ppm. As a single cycle plant, it has an output of 288 MW with an efficiency of 38.7%. When used in combined cycle configurations with one or two plants, it achieves efficiencies of 60.2% and 60.4% respectively. The 9F gas turbine provides consistent performance across various fuels and has a simple and robust air-cooled design suitable for long-term use.

Uploaded by

amine
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
104 views1 page

9f - Fact Sheet Product Specifications

The document summarizes the performance specifications of the 9F.04 heavy duty gas turbine from GE. It can provide a combined cycle efficiency of more than 60% with low NOx emissions of 15 ppm. As a single cycle plant, it has an output of 288 MW with an efficiency of 38.7%. When used in combined cycle configurations with one or two plants, it achieves efficiencies of 60.2% and 60.4% respectively. The 9F gas turbine provides consistent performance across various fuels and has a simple and robust air-cooled design suitable for long-term use.

Uploaded by

amine
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

9F HEAVY DUT Y GAS TURBINE

50HZ

288 MW SIMPLE CYCLE OUTPUT UP TO

>60% COMBINED CYCLE EFFICIENCY 80%+


HYDROGEN
THE 9F.04 HEAV Y DUT Y GAS TURBINE C A PA B I L I T Y
PROVIDES COMBINED CYCLE EFFICIENCY
OF MORE THAN 60% WITH LOW 15 PPM
NOx EMISSIONS .

9 F. 0 4 With over 450 units deployed to more than


SC Net Output (MW) 288 40 countries, GE has the largest operating and
PERFORMANCE
SC PLANT

SC Net Heat Rate (Btu/kWh, LHV) 8,810 most experienced 50 Hz F-Class fleet in the
SC Net Heat Rate (kJ/kWh, LHV) 9,295 world. Our 9F gas turbine delivers consistent
SC Net Efficiency (%, LHV) 38.7%
performance and accommodates a diverse
CC Net Output (MW) 443
range of fuels, making it ideal for a variety of
CC Net Heat Rate (Btu/kWh, LHV) 5,666
PERFORMANCE

combined cycle and CHP applications. The


1X CC PLANT

CC Net Heat Rate (kJ/kWh, LHV) 5,978


CC Net Efficiency (%, LHV) 60.2% simple and robust air-cooled architecture
Plant Turndown – Minimum Load (%) 48.0% is designed for longer parts durability and
Ramp Rate (MW/min) 22 extended service inspection intervals, making
Startup Time (RR Hot†, Minutes) 30
the 9F an ideal choice for life-cycle value.
CC Net Output (MW) 889
CC Net Heat Rate (Btu/kWh, LHV) 5,649
PERFORMANCE
2X CC PLANT

CC Net Heat Rate (kJ/kWh, LHV) 5,960


CC Net Efficiency (%, LHV) 60.4%
Plant Turndown – Minimum Load (%) 22.0%
Ramp Rate (MW/min) 44
Startup Time (RR Hot†, Minutes) 39
NOTE: All ratings are net plant, based on ISO conditions and natural gas fuel. Actual performance will vary with project-specific
conditions and fuel. © 2022 GE. All rights reserved.
† Rapid Response/Hot Start
GEA32929B (04/2022)

You might also like