Catalog May Bom Tsurumi Serie KTZ (E)
Catalog May Bom Tsurumi Serie KTZ (E)
com
KTZE
DRAINAGE PUMP
Submersible Heavy-duty Drainage Pump Registration of Design
The KTZ series is Tsurumi’s flagship line of submersible pumps. Made with a cast iron body Tsurumi has registered the design of the KTZ series around the world.
and high chromium iron impeller, the pumps can withstand the most demanding conditions Design rights are granted under the laws of each country.
found in construction, aggregate and mining applications. Versatility is increased as each
model has the capability of being easily converted between high head and high volume
performance with a simple change of impeller, suction plate and hose coupling.
Dual silicon carbide mechanical seals are isolated in the oil chamber to protect the seal faces
Selection Table
•• •• •• •
against abrasion and corrosion. In addition, the seals are enclosed in Tsurumi’s patented
Oil Lifter to ensure reliable lubrication and cooling. This design exceeds the standard 2" 50mm
configuration of competitors and offers a longer mechanical seal life for a more reliable pump.
• • •• ••
3" 80mm
KTZ
Pumps with a 7.5 or 11kW motor incorporate seal pressure relief ports, therefore mechanical 4" 100mm
seals are exposed only to the pressure developed by the sump submergence level. This virtually 6" 150mm
eliminates the premature wear and failure of mechanical seals in higher pressure applications.
•• •• ••
Motor Output 1.5kW 2.2kW 3.7kW 5.5kW 7.5kW 11kW
The KTZE is an automatic pump without cumbersome floats. An innovative electrode type 2" 50mm
relay unit built into the pump automatically starts and stops the pump to eliminate dry-running.
•
KTZE 3" 80mm
This mechanism greatly reduces power consumption and extends operating life!
4" 100mm
KTZ E 4 3.7
Options
3 5 It is possible to set a lower starting water level by using an extension probe (optional accessory). The starting
water level is adjustable because the extension probe can be cut to the desired length as it is made of coil spring.
6
Automatic Operation
I II
Pump continues to run When the water surface
Electrode Control Device while the electric probe falls below the electric
remains submerged. probe, timer starts to
Consisting of an electric probe and relay unit, this enables automatic operation, reduces power consumption and extends count about one minute.
operating life.
1 Multi-directional Hose Coupling
Can be configured for inclined or vertical discharge, allowing for smoother installation.
755 (675)
S.W.L.
Weight [excl. Cable] Weight [excl. Cable]
623 (543)
34 · 39 kg 60 · 69 kg
628 (548)
20
717 (637)
10 Cable Length 8m Cable Length 8m
Shaft Seal Double Mechanical Seal Shaft Seal Double Mechanical Seal
with Oil Lifter 10 with Oil Lifter
435
345
Motor Protector Circle Thermal Protector C.W.L. Motor Protector Circle Thermal Protector C.W.L.
Starting Method Direct on Line Starting Method Direct on Line
(120)
0 0
(150)
0 0.1 0.2 0.3 0.4 0.5 0 0.1 0.2 0.3 0.4 0.5 0.6
CAPACITY (m3/min) CAPACITY (m3/min)
235 283
-1
S.S. 3000 / 3600min-1 Nominal Dia. S.S. 3000 / 3600min Nominal Dia.
18 80 35 80
50Hz 50Hz
60Hz KTZ31.5 KTZE31.5 30 60Hz KTZ33.7 KTZE33.7
Motor Output 1.5 kW [Three-phase] Motor Output 3.7 kW [Three-phase]
Dis. Bore 80 mm Dis. Bore 80 mm
TOTAL HEAD (m)
755 (675)
S.W.L.
Weight [excl. Cable]
623 (543)
33 · 38 kg Weight [excl. Cable] 60 · 69 kg
628 (548)
717 (637)
Cable Length 8m Cable Length 8m
Shaft Seal Double Mechanical Seal 10 Shaft Seal Double Mechanical Seal
with Oil Lifter with Oil Lifter
435
345
Motor Protector Circle Thermal Protector C.W.L. Motor Protector Circle Thermal Protector C.W.L.
0
Starting Method Direct on Line Starting Method Direct on Line
(120)
0
(150)
0 0.2 0.4 0.6 0 0.2 0.4 0.6 0.8 1.0
CAPACITY (m3/min) CAPACITY (m3/min)
235 283
-1
S.S. 3000 / 3600min-1 Nominal Dia. S.S. 3000 / 3600min Nominal Dia.
35 50 100
50Hz KTZ22.2 KTZE22.2 20 50Hz KTZ43.7 KTZE43.7
30 60Hz 60Hz
Motor Output 2.2 kW [Three-phase] Motor Output 3.7 kW [Three-phase]
Dis. Bore 50 mm
TOTAL HEAD (m)
770 (690)
Weight [excl. Cable] S.W.L.
643 (563)
648 (568)
10
717 (637)
Cable Length 8m Cable Length 8m
10 Shaft Seal Double Mechanical Seal Shaft Seal Double Mechanical Seal
with Oil Lifter with Oil Lifter
435
355
Motor Protector Circle Thermal Protector C.W.L. Motor Protector Circle Thermal Protector C.W.L.
Starting Method Direct on Line Starting Method Direct on Line
0
(120)
(150)
0 0.1 0.2 0.3 0.4 0.5 0 0.4 0.8 1.2 1.6
CAPACITY (m3/min) CAPACITY (m3/min)
235 283
10
Cable Length 8m
Shaft Seal Double Mechanical Seal
with Oil Lifter
355
0
Starting Method Direct on Line
(120)
719
864
Cable Length 8m
688
Cable Length 8m 20
740
Shaft Seal Double Mechanical Seal Shaft Seal Double Mechanical Seal
10 with Oil Lifter with Oil Lifetr
10
Motor Protector Circle Thermal Protector C.W.L. Seal Protection Seal Pressure Relif Port C.W.L
190
0 0
150
0 0.2 0.4 0.6 0.8 1.0 1.2 0 0.5 1.0 1.5 Starting Method Direct on Line
CAPACITY (m /min)3 CAPACITY (m3/min)
306 374
-1
S.S. 3000 / 3600min Nominal Dia. S.S. 3000 / 3600min-1 Nominal Dia.
26 100 40 150
50Hz 50Hz
60Hz KTZ45.5 60Hz KTZ611
20 30
Motor Output 5.5 kW [Three-phase] Motor Output 11 kW [Three-phase]
Dis. Bore 100 mm Dis. Bore 150 mm
TOTAL HEAD (m)
734
884
10
688
Cable Length 8m Cable Length 8m
740
Shaft Seal Double Mechanical Seal 10
Shaft Seal Double Mechanical Seal
with Oil Lifter with Oil Lifetr
Motor Protector Circle Thermal Protector C.W.L
C.W.L. Seal Protection Seal Pressure Relif Port
Starting Method Direct on Line Motor Protector Circle Thermal Protector
190
0 0
150
0 0.4 0.8 1.2 1.6 2.0 0 1.0 2.0 2.8 Starting Method Direct on Line
CAPACITY (m3/min) CAPACITY (m3/min)
306 374
30
Dis. Connection Hose Coupling
Weight [excl. Cable] 101 kg
20
Cable Length 8m
812
CAPACITY (m3/min) The KTD is a submersible heavy-duty slurry pump utilizing the KTZ series as the base.
It is designed to have more motor shaft power allowance than the KTZ to handle muddy water with higher specific gravities.
330
An agitator suspends solids to assist in pumping sediments in combination with a dedicated strainer.
This pump is suitable for transferring or draining bentonite slurry.
S.S. 3000 / 3600min-1 Nominal Dia. S.S. 3000 / 3600min-1 Nominal Dia.
35 150 26 80 (50)
50Hz 50Hz
30 60Hz KTZ67.5 60Hz KTD22.0 · KTD33.0
20
Motor Output 7.5 kW [Three-phase] Motor Output 2.0 · 3.0 kW [Three-phase]
Dis. Bore 150 mm Dis. Bore 50 · 80 mm
TOTAL HEAD (m)
TOTAL HEAD (m)
KT
20
Dis. Connection Hose Coupling Dis. Connection Hose Coupling
D33
654 (519)
Weight [excl. Cable] Weight [excl. Cable]
644 (550)
100 kg 38 · 65 kg
.0
KT
2.0
10 Shaft Seal Double Mechanical Seal Shaft Seal Double Mechanical Seal
697
160 (140)
C.W.L.
Motor Protector Circle Thermal Protector Starting Method Direct on Line
0 0
0 1.0 2.0 2.4 Starting Method Direct on Line 0 0.2 0.4 0.6 0.8 1.0
190
We reserve the right to change the specifications and designs for improvement without prior notice.
Your Dealer