LIST Cement

Client: Ivory Coast Cem.No.: B204871

Project Name: Sancem Client No.:

Document Name Rev

204295-PLA- LUL0002 00 LUBRICATION LIST
Date Prep. by: Date Chk by:
21.12.16 Hue -- -- Oil / GREASE
Revision Index
Revision Date Name Checked Line / Change

Remark
For regreasing only use the prescribed brand of grease acc. to the lubrication instructions. If an other brand of grease is used, the grease in the bearing casing has to be removed and must be filled with the prescribed grease quantity for first filling.
1
Greases may only be mixed, if the saponification base as well as the basic oil types are equal. The viscosity of the basic oil should roughly also be equal.
2 Avoid a mixture of different lubricants ! In case of change to another lubricant type and / or manufacturer the compatibility is to be checked and actions against unintentional mixing are to be attempted if necessary.
3 In case of possible differences to this list because of special instructions by part manufacturers, gear unit and motor manufacturers these special documents must be considered
4 Check the grease filling of the labyrinth seal prior to the commissioning.
Relating Document
Document No. Revision Document Name

489075 Belt Bucket Elevator BWG-L 400/250

Criterion Standard Quality characteristics

QTY. OF
EQUIP-MENT GREASE Delivery PRIMARY RELUBRICATION INTERVAL FOR FURTHER CHANGE
POS NO.
NO.
LUBRICATION DENOMINATION OF COMPONENT LUBRICATION TYPE QUANTITY QUANTITY [g]
CHANGE QUANTITY
RELUBRICATION
FIRST CHANGE INTERVAL
INTERVAL
POINTS SPECIFICATIONS Status
K2K-20 grease
01 2 Drive pulley, (bearing) grease gun filled 0,9 kg 0,07 kg 1800 h / every 3 month
as per DIN 51 825

02 2 Tension pulley, (bearing) (4) Bearings are maintenance-free; Labyrinth seal: Automatic lubricator

Main drive:
K2K-20 grease as per DIN
03 2 Motor (bearings) grease gun filled 30 g 17000 h
51 825

HLP oil, ISO VG 32 or VG

04 1 Hydraulic coupling (Flender) oil filling ~5 l ~5 l max. 10,000 h / 5 years
33 as per DIN 51 524
ISO VG 320
10000 h /
05 1 Gear unit Splash lubrication (CLP CLP Mineral oil; DIN ~9 l ~9 l 400 h
24 month
51 519)
K2K-20 grease
05.1 2 Gear unit (shaft seal) grease gun as per DIN 51 825; filled 0,03 kg 3000 h / 6 month
NLGI-class 2
ISO VG 320
10000 h /
06 1 Backstopp Splash lubrication (CLP CLP Mineral oil; DIN ~0.5 l ~0.5 l 400 h
24 month
51 519)
ISO VG 320
10000 h /
07 1 Overriding clutch Splash lubrication (CLP CLP Mineral oil; DIN ~1 l ~1 l 400 h
24 month
51 519)
Maintenance drive:
K3K-20 grease
08 2 Motor (bearings) grease gun as per DIN 51 825; filled life-lubrication
NLGI-class 3
ISO VG 220
10000 h / 20000 h /
09 1 Gear unit Splash lubrication (PAO Synthetic oil; filled ~2,2 l ~2,2 l
2 years 4 years
DIN 51 519)

Cemtec GmbH, Stadlgasse 8a, 4470 Enns, Austria Page 1of 2

Tel: ++43/7223/83620; Fax ++43/7223/85083 489075 CEMTEC Schmierliste_BWG-L; Lubrication list - oil & grease Print Date 21.12.2016
 QTY. OF
EQUIP-MENT GREASE Delivery PRIMARY RELUBRICATION INTERVAL FOR FURTHER CHANGE
POS NO.
NO.
LUBRICATION DENOMINATION OF COMPONENT LUBRICATION TYPE QUANTITY QUANTITY [g]
CHANGE QUANTITY
RELUBRICATION
FIRST CHANGE INTERVAL
INTERVAL
POINTS SPECIFICATIONS Status

Drive pulley, (bearing)

Cemtec GmbH, Stadlgasse 8a, 4470 Enns, Austria Page 2of 2

Tel: ++43/7223/83620; Fax ++43/7223/85083 489075 CEMTEC Schmierliste_BWG-L; Lubrication list - oil & grease Print Date 21.12.2016