Bearing Reference

CONTENTS

Guide
UNISPHERE II
Features / Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B13-2
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B13-3
Nomenclature. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B13-3
Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B13-4

E-Family Roller
Dimensions

Bearings
Pillow Block - Inch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B13-12
Flange Bearing - Inch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B13-14
Bearing Insert With Seal - Inch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B13-16
Plummer Block Bearing - Metric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B13-18
Flange Bearing - Metric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B13-20
Bearing Insert With Seal - Metric. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B13-21
Part Number Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INDEX-1

Specialty Tapered
Key Word Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . KEYWORD-1

Products
S-2000
UNISPHERE II
IMPERIAL
UNIFIED SAF

­B13-1
Bearing Reference

FEATURES/BENEFITS
Guide

UNISPHERE II UNISPHERE II

• High capacity double row spherical bearings

• 2-bolt pillow blocks and 4-bolt flange bearings 1-7/16”
to 4”, 40mm to 90mm.
• Same rolling elements and installation ready features as
E-Family Roller

the S-2000 bearing.

Bearings

• Ductile iron pillow block housing with 65,000 PSI

tensile strength is 92% the strength of steel.
• DODGE “R” Seal provides contacting lip protection,
crimped to the outer race; maintains sealing
effectiveness at maximum misalignment.
• Springlok™ collar mount with 65 setscrew spacing for
Specialty Tapered

optimum clamping force.

Products
S-2000

Dimensionally comparable with

ball bearings:
UNISPHERE II

• Length through the bore

• Base-to-center height
• Footprint

Approximately five times the rating of a ball bearing

IMPERIAL
UNIFIED SAF

NOTE: Instruction manuals for Dodge bearings are available on www.dodge-pt.com

­B13-2
 Bearing Reference
SPECIFICATION

Guide
UNISPHERE II
INCH

DODGE Unitized UNISPHERE II are general purpose, high- iron (ASTM A536 Grade 65-45-12) with 65,000 p.s.i. tensile
capacity, double-row spherical roller bearings. All are mounted strength. Housing designs are available for survival in extreme
in single piece precision machined housings. Bearings are harsh environments, through the use of special finishes and
mounted to shafts by means of set screw collars, with 65 stainless hardware.

E-Family Roller
degree set screw spacing for maximum clamping force. Housings are available in a variety of standard configurations,

Bearings
ASTM A48 Class 30 cast iron is the standard material used in including pillow blocks and flanges. Rubbing lip seals are
S-2000 housings and UNISPHERE II flanged housings. The standard on all units.
standard material used in UNISPHERE II pillow blocks is ductile

Specialty Tapered
Products
S-2000
UNISPHERE II
NOMENCLATURE
P2B - UN2 - 207 - R

HOUSING BEARING
SIZE SEAL
STYLE TYPE
IMPERIAL
P2B = Pillow Block 2-Bolt UN2 = UNISPHERE II Inches and 16th R= Single Lip
Base, Ductile Iron 2 = 2” and 07 = 7/16” Rubbing Seal
or 207 = 2-7/16”
F4B = Flange Bearing E= Expansion Type Bearing - If “E”
4-Bolt, Cast Iron Does Not Appear, Bearing Is
Non-Expansion Type

M= Metric Bore
UNIFIED SAF

FEATURES/BENEFITS NOMENCLATURE SELECTION DIMENSIONS

PAGE B13-2 PAGE B13-3 PAGE B13-4 PAGE B13-12

­B13-3
Bearing Reference

SELECTION
Guide

UNISPHERE II
SPHERICAL ROLLER BEARINGS
DODGE Unitized Spherical Roller Bearings have the capacity to The magnitude and direction of both the thrust and radial load
carry heavy radial loads and combined radial and thrust loads. must be taken into account when selecting a housing. When
The maximum recommended load which can be applied is pillow blocks are utilized, heavy loads should be directed
limited by various components in the system such as bearing, through the base. Where uplift loads are involved, see Table
housing, shaft, shaft attachment, speed and life requirements 7 on page B13-11 for maximum values. Where a load pulls
E-Family Roller

as listed in this catalog. DODGE spherical roller bearings have the housing away from the mounting base, both the hold-down
Bearings

been applied successfully even when these limits have been bolts and housing must be of adequate strength. Auxiliary load
exceeded under controlled operating conditions. Contact carrying devices such as shear bars are advisable for side or
DODGE Application Engineering (864-284-5700) for applications end loading of pillow blocks and radial loads for flange units.
which exceed the recommendations of this catalog.
Shaft Tolerances
Shaft Size S-2000
L10 Hours Life - The life which may be expected from at least UP TO 1-1/2” +.0000 -.0005”
90% of a given group of bearings operating under identical 1-9/16 TO 4” +.000 -.001”
Specialty Tapered

conditions. 4-7/16 TO 5” +.000 -.0015”

( )
Products

10/3
L10 Life, Hours = ( )
C
P
X
16667
RPM
BEARING SUPPORTING RADIAL LOADS ONLY
Where: C = Dynamic Capacity (Table 1 and Table 2 on pages 1. Define L10 Life Hours desired.
B13-6 and B13-7) lbs. 2. Establish bearing radial load, FR
P = Equivalent Radial Load, lbs. (FR = P for Pure Radial Load Conditions). The DODGE
program BEST™★ can be used to find application loads.
3. Establish RPM.
GENERAL
Using the easy selection Table 3 on page B13-8 , find, under the
S-2000

Heavy Service - For heavy shock loads, frequent shock loads, RPM column, the equivalent radial load that equals or is slightly
or severe vibrations, add up to 50% (according to severity higher than the application radial load for the desired life. The
of conditions) to the Equivalent Radial Load to obtain a shaft size on the far left will be the minimum shaft size that you
Modified Equivalent Radial Load. Consult DODGE Application can use for your application.
Engineering for additional selection assistance.
Thrust load values shown in the table below are recommended If the desired life is different than the values shown on the chart,
as a guide for general applications that will give adequate L10 use alternate Method A shown below.
life. Spherical bearings require a radial load at least equal to Example: 1. L10 Life = 30,000 Hours
UNISPHERE II

the thrust load for proper operation. If the thrust load exceeds
2. Radial load = 4000 lbs.
this limit, consult Application Engineering. Where substantial
radial load is also present, it is advisable to calculate actual L10 3. RPM = 1,020
life to assure that it meets the requirements. The effectiveness At the intersection of the 1,020 RPM column and the 30,000
of the shaft attachment to carry thrust load depends on hours L10 life row, the equivalent radial load of 4092 lbs. exceeds
proper tightening of the set screws, shaft tolerance and shaft the 4000 lbs, radial load for shaft size 2-7/16”. A bearing with
deflections. Therefore, it is advisable to use auxiliary thrust bore 2-7/16”, or larger, may be used for this application.
carrying devices such as shaft shoulder, snap ring or a thrust
collar to locate the bearing under thrust loads heavier than
shown below, or where extreme reliability is desired.
IMPERIAL

RPM 20-200 201 - 2000 Over 2000

RECOMMENDED THRUST LOAD C/20 C/40 C/60
The shaft tolerances recommended below are adequate for
normal radial and radial/thrust load applications. The radial load ★ The DODGE Bearing Evaluation and Selection Technique
is limited by the attachment to the shaft (see Table 1 on page (BEST) is a menu driven computer program that calculates
B13-6). Where the applied radial load (FR) exceeds this limit bearing loads, fatigue life and operating temperature for a two
(maximum allowable slip fit radial load), a snug-to-light press fit bearing shaft system based on user supplied input parameters.
of the shaft is required. Since the allowable load, especially at a This interactive web based program is available at www.dodge-
UNIFIED SAF

low speed, is very large, the shaft should be checked to assure pt.com. Use PT Wizard on line under the tools drop down box.
adequate shaft strength.

FEATURES/BENEFITS SPECIFICATION NOMENCLATURE DIMENSIONS

PAGE B13-2 PAGE B13-3 PAGE B13-3 PAGE B13-12

­B13-4
 Bearing Reference
SELECTION

Guide
UNISPHERE II
ALTERNATE METHOD A - SELECTING A BEARING can be compared to the allowable equivalent radial load ratings
FOR AN L10 LIFE VALUE NOT SHOWN IN THE EASY for the speed and hours life desired in the easy selection Table
3 on page B13-8 or Table 4 on page B13-9.
SELECTION CHART.

The L10 life equation can be rearranged so that the bearing SELECTING BEARINGS SUPPORTING ONLY THRUST

E-Family Roller
dynamic capacity C is identified in terms of L10, RPM and P
LOADS

Bearings
C=
( 16667 )
L10 X RPM 0.3
X P Spherical Roller Bearings generally are not recommended
for pure thrust load applications. However, they will perform
satisfactorily under very light pure thrust loads. Consult DODGE
Application Engineering (864-284-5700).
(P = FR for Pure Radial Load Conditions)
Since the L10, RPM and P are known, solve for C. Select from
the dynamic capacity column on Table 1 on page B13-6 the SELECTING LUBRICATION

Specialty Tapered
C value equal to or greater than the C value just cal­culated.
The bore size on the far left represents the proper bore size DODGE UNISPHERE II spherical roller bearings are lubricated

Products
selection. Check that the application RPM does not exceed the at the factory with Mobilgrease XHP222 grease. Mobilgrease
MAX. RPM on Table 1 and Table 2 on pages B13-6 and B13-7 . XHP222 is a superior industrial grease using a lithium complex
Also check that the radial load does not exceed the Maximum thickener and highly refined base oil. This grease will adequately
Allowable Slip Fit Radial Load shown on Table 1 and Table 2. handle low and medium speeds with low and medium loads at
If it does, a line-to-line to light press fit of shaft is required. normal temperatures as defined on Table 6 on page B13-10. For
When selecting an L10 life of less than 30,000 hours, particular very low and high speeds, for heavy loads and for low and high
attention must be paid to shaft deflection and proper lubri­cant temperatures, special greases must be used. Contact DODGE
selection. Application Engineering (864-284-5700). DODGE engineers
will recommend bearings and lubricants for the above unusual
conditions. DODGE also has the expertise to custom design and
SELECTING BEARINGS SUPPORTING

S-2000
build special bearings for your needs. The only maintenance
COMBINATION RADIAL AND THRUST LOADS requirement for DODGE Unitized roller bearings is periodic
When a bearing supports both a radial load and a thrust load, relubrication at regular intervals as outlined in the appropriate
the loading on the two rows is shared unequally depending on instruction manuals.
the ratio of thrust to radial load. The use of the X (radial factor)
and Y (thrust factor) from Table 1 and Table 2 con­verts the
applied thrust load and radial loads to an equiva­lent radial load MISALIGNMENT CONSIDERATIONS
having the same effect on the life of the bearing as a radial load In nearly all applications, good design practice requires two

UNISPHERE II
of this magnitude. bearings supporting the shaft. In cases where three or more
bearings are installed, unless precautions are taken to line the
The equivalent radial load P = XFR + YFA bearings up both vertically and horizontally, it is possible to
Where: induce heavy loads. In the case of two bearings, alignment is
not as critical, especially with DODGE Unitized Spherical Roller
Bearings. UNISPHERE II bearings are designed to allow a
P = Equivalent radial load, lbs.
maximum of ±1° of static and dynamic misalignment. However,
FR = Radial load, lbs. (see Table 1 for allowable slip fit for optimum seal performance, misalignment should be kept
maximum load) under ±0.5°. To ensure good alignment, mounting surfaces must
FA = Thrust (axial) load, lbs. be checked for flatness and must lie in the same plane. When
e = Thrust load to radial load factor (Table 1 and Table 2)★ tightening base bolts, each bolt should be alternately tightened IMPERIAL
X = Radial load factor (Table 1 and Table 2)★ in incremental torque values until full torque is achieved to
Y = Thrust load factor (Table 1 and Table 2)★ prevent the angular shifting of the pillow block that occurs
when one bolt is tightened to its full torque. Shimming may be
To find X and Y, calculate FA/FR and compare to e for the required to minimize misalignment.
selected bore size. Determine X and Y from Table 1 and Table 2
on pages B13-6 and B13-7 depending on whether FA/FR is equal
to or less than e, or FA/FR is greater than e. Substitute all known
values into the equivalent radial load equation. P (equivalent
UNIFIED SAF

radial load) can be used in the life formula to determine L10, or it

FEATURES/BENEFITS SPECIFICATION NOMENCLATURE DIMENSIONS

PAGE B13-2 PAGE B13-3 PAGE B13-3 PAGE B13-12

­B13-5
Bearing Reference

SELECTION
Guide

UNISPHERE II
Table 1: UNISPHERE II Spherical Roller Bearings Radial And Thrust Factors
FA/FR ≤ e FA/FR ≥ e
Max.
Allow.
Dynamic
Shaft Basic Slip Fit Static
Capacity Maximum
Size Bearing e Radial Capacity
X Y X Y (C) RPM
Inch Description Load C0
Lbs.
E-Family Roller

FR*
Bearings

Lbs.

1-1/8
1-3/16
1-1/4
22208 0.28 1 2.4 0.67 3.6 3,750 20,800 21,000 3,000
1-3/8
1-7/16
1-1/2
Specialty Tapered

1-5/8
1-11/16 22209 0.26 1 2.6 0.67 3.9 3,750 20,800 22,000 2,800
Products

1-3/4
1-7/8
1-15/16 22210 0.24 1 2.8 0.67 4.2 4,000 22,000 24,000 2,625
2
2-3/16
22211 0.23 1 2.9 0.67 4.3 4,860 27,000 29,000 2,325
2-1/4
2-3/8
2-7/16 22213 0.24 1 2.8 0.67 4.2 6,840 39,000 47,500 1,900
2-1/2
S-2000

2-11/16
2-3/4
22215 0.22 1 3.1 0.67 4.6 7,500 41,500 53,000 1,700
2-15/16
3
3-3/16
3-1/4
22218 0.23 1 2.9 0.67 4.3 11,500 65,500 81,500 1,400
3-7/16
3-1/2
UNISPHERE II

3-11/16
3-15/16 22220 0.24 1 2.8 0.67 4.2 14,400 83,000 104,000 1,250
4
* If load exceeds “Max. allowable slip fit load,” line to line to light press fit of shaft required. Maximum slip fit radial loads apply if
recommended shaft sizes are used.
IMPERIAL
UNIFIED SAF

FEATURES/BENEFITS SPECIFICATION NOMENCLATURE DIMENSIONS

PAGE B13-2 PAGE B13-3 PAGE B13-3 PAGE B13-12

­B13-6
 Bearing Reference
SELECTION

Guide
UNISPHERE II
Table 2: UNISPHERE II Metric Spherical Roller Bearing

Max.
FA/FR ≤ e FA/FR ≥ e
Allow. Slip Dynamic
Basic
Shaft Fit Radial Capacity Maximum
Bearing e
MM Load (C) RPM
Description
FR* kN

E-Family Roller
X Y X Y kN

Bearings
30
22208 0.28 1 2.4 0.67 3.6 17 93 3000
35
40
22209 0.26 1 2.6 0.67 3.9 17 93 2800
45
50 22210 0.24 1 2.8 0.67 4.2 18 98 2625
55 22211 0.23 1 2.9 0.67 4.3 22 120 2325

Specialty Tapered
60
22213 0.24 1 2.8 0.67 4.2 30 169 1900
65

Products
70
22215 0.22 1 3.1 0.67 4.6 33 185 1700
75
80
85 22218 0.23 1 2.9 0.67 4.3 51 285 1400
90
* If load exceeds “Max. allowable slip fit load,” line to line to light press fit of shaft required. Maximum slop fit radial loads apply if
recommended shaft sizes are used.

S-2000
UNISPHERE II
IMPERIAL
UNIFIED SAF

FEATURES/BENEFITS SPECIFICATION NOMENCLATURE DIMENSIONS

PAGE B13-2 PAGE B13-3 PAGE B13-3 PAGE B13-12

­B13-7
Bearing Reference

SELECTION
Guide

UNISPHERE II
Table 3: Easy Selection Table for UNISPHERE Double Row Spherical Roller Bearings
Shaft L10 Allowable Equivalent Radial Load Rating (lbs.) at Various Revolutions per Minute
Size Life
Inches Hours 50 100 150 250 500 870 1,020 1,250 1,400 1,700 1,900 2,325 2,625 2,800 3000
10,000 7,498 6,090 5,393 4,626 3,758 3,182 3,034 2,855 2,759 2,603 2,518 2,370 2,285 2,241 2,195
E-Family Roller

1-3/8 30,000 5,393 4,380 3,878 3,327 2,703 2,289 2,182 2,053 1,984 1,872 1,811 1,704 1,643 1,612 1,579
Bearings

to 40,000 4,947 4,018 3,558 3,052 2,479 2,100 2,002 1,883 1,820 1,717 1,661 1,563 1,508 1,479 1,448
1-1/2 60,000 4,380 3,558 3,150 2,703 2,195 1,859 1,773 1,668 1,612 1,521 1,471 1,384 1,335 1,309 1,282
100,000 3,758 3,052 2,703 2,319 1,883 1,595 1,521 1,431 1,383 1,305 1,262 1,188 1,145 1,123 1,100
10,000 7,498 6,090 5,393 4,626 3,758 3,182 3,034 2,855 2,759 2,603 2,518 2,370 2,285 2,241 2,195
1-11/16 30,000 5,393 4,380 3,878 3,327 2,703 2,289 2,182 2,053 1,984 1,872 1,811 1,704 1,643 1,612 1,579
to 40,000 4,947 4,018 3,558 3,052 2,479 2,100 2,002 1,883 1,820 1,717 1,661 1,563 1,508 1,479 1,448
1-3/4 60,000 4,380 3,558 3,150 2,703 2,195 1,859 1,773 1,668 1,612 1,521 1,471 1,384 1,335 1,309 1,282
100,000 3,758 3,052 2,703 2,319 1,883 1,595 1,521 1,431 1,383 1,305 1,262 1,188 1,145 1,123 1,100
Specialty Tapered

10,000 7930 6441 5704 4893 3975 3366 3209 3019 2918 2753 2663 2506 2417
Products

1-15/16 30,000 5704 4633 4102 3519 2859 2421 2308 2172 2099 1980 1915 1803 1738
to 40,000 5232 4250 3763 3228 2622 2221 2117 1992 1925 1817 1757 1654 1595
2 60,000 4633 3763 3332 2859 2322 1966 1875 1764 1705 1608 1556 1464 1412
100,000 3975 3228 2859 2452 1992 1687 1608 1513 1463 1380 1335 1256 1211
10,000 9,733 7,905 7,000 6,005 4,878 4,131 3,939 3,706 3,582 3,379 3,268 3,076
30,000 7,000 5,686 5,035 4,319 3,508 2,971 2,833 2,665 2,576 2,430 2,350 2,212
2-3/16 40,000 6,421 5,216 4,618 3,962 3,218 2,726 2,599 2,445 2,363 2,229 2,156 2,029
60,000 5,686 4,618 4,089 3,508 2,850 2,413 2,301 2,165 2,092 1,974 1,909 1,797
100,000 4,878 3,962 3,508 3,010 2,445 2,070 1,974 1,857 1,795 1,694 1,638 1,542
10,000 14,058 11,419 10,111 8,674 7,046 5,967 5,689 5,352 5,173 4,881 4,721
S-2000

30,000 10,111 8,213 7,272 6,239 5,068 4,292 4,092 3,850 3,721 3,510 3,395
2-7/16
40,000 9,275 7,534 6,671 5,723 4,649 3,937 3,753 3,531 3,413 3,220 3,114
2-1/2
60,000 8,213 6,671 5,907 5,068 4,116 3,486 3,324 3,127 3,022 2,851 2,758
100,000 7,046 5,723 5,068 4,348 3,531 2,991 2,851 2,683 2,593 2,446 2,366
10,000 14,959 12,151 10,759 9,230 7,497 6,350 6,054 5,696 5,505 5,194
2-11/16 30,000 10,759 8,739 7,738 6,639 5,392 4,567 4,354 4,096 3,959 3,735
to 40,000 9,870 8,017 7,098 6,090 4,946 4,189 3,994 3,758 3,632 3,427
3
UNISPHERE II

60,000 8,739 7,098 6,285 5,392 4,380 3,709 3,537 3,327 3,216 3,034
100,000 7,497 6,090 5,392 4,626 3,758 3,182 3,034 2,855 2,759 2,603
10,000 23,611 19,178 16,981 14,569 11,833 10,022 9,555 8,989 8,689
30,000 16,981 13,793 12,213 10,478 8,511 7,208 6,872 6,465 6,249
3-7/16
40,000 15,577 12,653 11,203 9,612 7,807 6,612 6,304 5,931 5,732
3-1/2
60,000 13,793 11,203 9,920 8,511 6,913 5,855 5,582 5,251 5,076
100,000 11,833 9,612 8,511 7,302 5,931 5,023 4,789 4,505 4,355
10,000 29,919 24,302 21,518 18,461 14,995 12,699 12,108 11,391
30,000 21,518 17,478 15,476 13,278 10,785 9,134 8,708 8,193
3-15/16
40,000 19,739 16,033 14,197 12,180 9,893 8,378 7,988 7,515
4
IMPERIAL

60,000 17,478 14,197 12,571 10,785 8,760 7,419 7,073 6,655

100,000 14,995 12,180 10,785 9,252 7,515 6,365 6,068 5,709
In the light shaded area, a line-to-line to light press fit on the shaft is required.
UNIFIED SAF

FEATURES/BENEFITS SPECIFICATION NOMENCLATURE DIMENSIONS

PAGE B13-2 PAGE B13-3 PAGE B13-3 PAGE B13-12

­B13-8
 Bearing Reference
SELECTION

Guide
UNISPHERE II
Table 4: Easy Selection Table for Metric UNISPHERE Double Row Spherical Roller Bearings
Shaft L10 Allowable Equivalent Radial Load Rating (Newtons) at Various Revolutions per Minute
Size Life
mm Hours 50 100 150 250 500 870 1,020 1,250 1,400 1,700 1,900 2,325 2,625 2,800 3000
10,000 33,365 27,101 23,997 20,587 16,722 14,162 13,502 12,703 12,278 11,584 11,204 10,545 10,168 9,973 9,769

E-Family Roller
30,000 23,997 19,492 17,259 14,807 12,027 10,186 9,711 9,136 8,831 8,331 8,058 7,584 7,313 7,173 7,026
30

Bearings
40,000 22,013 17,880 15,832 13,583 11,032 9,343 8,908 8,381 8,101 7,642 7,392 6,957 6,709 6,580 6,445
35
60,000 19,492 15,832 14,019 12,027 9,769 8,273 7,888 7,421 7,173 6,767 6,545 6,160 5,940 5,826 5,707
100,000 16,722 13,583 12,027 10,318 8,381 7,098 6,767 6,367 6,154 5,806 5,615 5,285 5,096 4,998 4,896
10,000 33,350 27,089 23,986 20,578 16,715 14,156 13,496 12,697 12,273 11,578 11,198 10,540 10,164 9,969
30,000 23,986 19,483 17,251 14,800 12,021 10,181 9,707 9,132 8,827 8,327 8,054 7,581 7,310 7,170
40
40,000 22,003 17,872 15,825 13,576 11,027 9,339 8,904 8,377 8,097 7,639 7,388 6,954 6,705 6,577
45
60,000 19,483 15,825 14,012 12,021 9,764 8,270 7,884 7,418 7,170 6,764 6,542 6,158 5,937 5,824
100,000 16,715 13,576 12,021 10,313 8,377 7,095 6,764 6,364 6,151 5,803 5,613 5,283 5,094 4,996

Specialty Tapered
10,000 35,290 28,664 25,381 21,775 17,687 14,979 14,281 13,436 12,987 12,252 11,850 11,154 10,755

Products
30,000 25,381 20,616 18,255 15,661 12,721 10,773 10,271 9,663 9,340 8,812 8,523 8,022 7,735
50 40,000 23,283 18,911 16,745 14,366 11,669 9,883 9,422 8,864 8,568 8,083 7,818 7,359 7,096
60,000 20,616 16,745 14,828 12,721 10,333 8,751 8,343 7,849 7,587 7,158 6,923 6,516 6,283
100,000 17,687 14,366 12,721 10,913 8,864 7,507 7,158 6,734 6,509 6,141 5,939 5,590 5,390
10,000 43,291 35,163 31,136 26,712 21,697 18,375 17,519 16,482 15,931 15,030 14,536 13,682
30,000 31,136 25,290 22,394 19,212 15,605 13,216 12,600 11,854 11,458 10,810 10,455 9,841
55 40,000 28,561 23,199 20,542 17,623 14,315 12,123 11,558 10,874 10,511 9,916 9,591 9,027
60,000 25,290 20,542 18,189 15,605 12,675 10,735 10,234 9,629 9,307 8,780 8,492 7,993
100,000 21,697 17,623 15,605 13,388 10,874 9,209 8,780 8,261 7,984 7,533 7,286 6,857
10,000 62,531 50,791 44,974 38,584 31,340 26,542 25,305 23,807 23,012 21,710 20,997

S-2000
30,000 44,974 36,530 32,346 27,750 22,540 19,089 18,200 17,123 16,551 15,614 15,102
60
40,000 41,255 33,510 29,672 25,456 20,677 17,511 16,695 15,707 15,182 14,323 13,853
65
60,000 36,530 29,672 26,273 22,540 18,308 15,505 14,783 13,908 13,443 12,683 12,266
100,000 31,340 25,456 22,540 19,338 15,707 13,302 12,683 11,932 11,533 10,881 10,524
10,000 66,539 54,047 47,857 41,057 33,349 28,243 26,927 25,334 24,487 23,101
30,000 47,857 38,872 34,420 29,529 23,985 20,313 19,367 18,221 17,611 16,615
70
40,000 43,900 35,658 31,574 27,088 22,002 18,634 17,765 16,714 16,155 15,241
75

UNISPHERE II
60,000 38,872 31,574 27,957 23,985 19,482 16,499 15,731 14,800 14,305 13,496
100,000 33,349 27,088 23,985 20,577 16,714 14,155 13,496 12,697 12,272 11,578
10,000 105,020 85,303 75,533 64,801 52,635 44,577 42,499 39,984 38,648
80 30,000 75,533 61,352 54,325 46,606 37,856 32,061 30,567 28,758 27,796
85 40,000 69,287 56,279 49,833 42,753 34,726 29,410 28,039 26,380 25,498
90 60,000 61,352 49,833 44,126 37,856 30,749 26,041 24,828 23,358 22,578
100,000 52,635 42,753 37,856 32,477 26,380 22,341 21,300 20,040 19,370
In the light shaded area, a line-to-line to light press fit on the shaft is required.

IMPERIAL
UNIFIED SAF

FEATURES/BENEFITS SPECIFICATION NOMENCLATURE DIMENSIONS

PAGE B13-2 PAGE B13-3 PAGE B13-3 PAGE B13-12

­B13-9
Bearing Reference

SELECTION
Guide

UNISPHERE II

Table 5: UNISPHERE II Maximum Axial Expansion - Inch And Metric

Bore Maximum Bore Maximum
Size Expansion Size Expansion
Inches Inches mm mm
E-Family Roller

1-7/16 to 1-1/2 5/32 - -

Bearings

1-11/16 to 1-3/4 5/32 40, 45 3.9

1-15/16 to 2 5/32 50, 55 3.9
2-3/16 5/32 60, 65 4.7
2-7/16 to 2-1/2 3/16 70, 75 4.7
2-11/16 to 3 3/16 80, 85, 90 4.7
3-7/16 to 3-1/2 3/16
3-15/16 to 4 7/32
Specialty Tapered
Products

Table 6: Definition Of Operating Conditions For Unitized

Spherical Roller Bearings
LOW SPEED UP TO 20% OF MAX. RPM (TABLE 1)
MEDIUM SPEED OVER 20% TO 80% OF MAX. RPM
HIGH SPEED OVER 80% OF MAX. RPM
UP TO 8% OF C (TABLE 1)
LIGHT LOAD OVER 8% TO 18% OF C
NORMAL LOAD
HEAVY LOAD OVER 18% OF C
C = DYNAMIC CAPACITY
S-2000

LOW TEMPERATURE 20°F TO -100°F

MEDIUM TEMPERATURE OVER 20°F TO 200°F
HIGH TEMPERATURE OVER 200°F TO 400°F
UNISPHERE II
IMPERIAL
UNIFIED SAF

FEATURES/BENEFITS SPECIFICATION NOMENCLATURE DIMENSIONS

PAGE B13-2 PAGE B13-3 PAGE B13-3 PAGE B13-12

­B13-10
 Bearing Reference
SELECTION

Guide
UNISPHERE II

E-Family Roller
Bearings
120º 150º 180º

Table 7: UNISPHERE II Housing Ratings, Ductile*

Specialty Tapered
Bore Pillow Block Max. Recommended Housing Cap Loads

Products
Size Designation P120 lb P150 lb P180 lb
1-1/8 to 1-1/2 UN2107 5500 6750 8000
1-5/8 to 1-3/4 UN2111 6800 8600 10000
1-7/8 to 2 UN2115 8000 9900 11700
2-3/16 to 2-1/4 UN2203 10200 12500 14800
2-3/8 to 2-1/2 UN2207 10200 12400 14900
2-11/16 to 3 UN2215 12900 15900 18900
3-3/16 to 3-1/2 UN2307 11900 14600 17400
3-11/16 to 4 UN2315 16900 20800 24600

S-2000
* When utilizing heavy cap loads on pillow block housings, the installation must adhere to the following procedures:
1. The pillow block base bolts must be on high strength (Grade 8) bolts and properly tightened to mounting structure
2. Stop bars (shear strips) should be used against the plummer block where side loads are encountered.
3. In all cases where loads are heavy, the L10 life of the bearing should be checked for proper selection and life requirements

Table 8: Metric UNISPHERE II Housing Ratings, Ductile*

Max. Recommended Housing Cap Loads
Plummer Block

UNISPHERE II
Designation P120 P150 P180
kN kN kN
UN2040M 31 37 44
UN2045M 31 37 44
UN2050M 35 44 52
UN2055M 45 55 65
UN2060M 45 55 66
UN2065M 45 55 66
UN2070M 57 70 84
UN2075M 57 70 84
UN2080M 53 65 77 IMPERIAL
UN2085M 53 65 77
UN2090M 53 65 77
* When utilizing heavy cap loads on plummer block housings, the installation must adhere to the following procedures:
1. The plummer block base bolts must be of high strength (Grade 10.9) and properly tightened to mounting structure.
2. Stop bars (shear strips) should be used against the plummer block where side loads are encountered.
3. In all cases where loads are heavy, the L10 life of the bearing should be checked for proper selection and life requirements.
UNIFIED SAF

NOTE: To convert kN to pounds-force, multiply kN by a factor of 225.

FEATURES/BENEFITS SPECIFICATION NOMENCLATURE DIMENSIONS

PAGE B13-2 PAGE B13-3 PAGE B13-3 PAGE B13-12

­B13-11
Bearing Reference

DIMENSIONS
Guide

UNISPHERE II Pillow Block - Inch

NOTE: All sizes use a

1/8-27 NPT hydraulic
grease fitting
E-Family Roller
Bearings

J
G F
Specialty Tapered

M
Products

D MIN
D MAX
B
S-2000

S S
HSG HSG

E
UNISPHERE II

R
A
A
L L
IMPERIAL

C C
UNIFIED SAF

EXPANSION NON-EXPANSION

FEATURES/BENEFITS SPECIFICATION NOMENCLATURE SELECTION

PAGE B13-2 PAGE B13-3 PAGE B13-3 PAGE B13-4

­B13-12
 Bearing Reference
DIMENSIONS

Guide
UNISPHERE II Pillow Block - Inch
Shaft Size Non-Expansion* Expansion
Approx. Wt.
Bearing Inch
Part No. Part Name Part No. Part Name Lbs.
∆
1-7/16 048000 P2B-UN2-107 048017 P2B-UN2-107E 5.5
22208
1-1/2 048001 P2B-UN2-108 048018 P2B-UN2-108E 5.4
1-11/16 048002 P2B-UN2-111 048019 P2B-UN2-111E 6.9

E-Family Roller
22209
1-3/4 048003 P2B-UN2-112 048020 P2B-UN2-112E 6.8

Bearings
1-15/16 048004 P2B-UN2-115 048021 P2B-UN2-115E 8.0
22210
2 048005 P2B-UN2-200 048022 P2B-UN2-200E 7.6
22211 2-3/16 048006 P2B-UN2-203 048023 P2B-UN2-203E 9.8
2-7/16 048007 P2B-UN2-207 048024 P2B-UN2-207E 13.6
22213
2-1/2 048008 P2B-UN2-208 048025 P2B-UN2-208E 13.4
2-11/16 048009 P2B-UN2-211 048026 P2B-UN2-211E 19.3
2-3/4 048010 † P2B-UN2-212 048027 † P2B-UN2-212E 19.0
22215
2-15/16 048011 P2B-UN2-215 048028 P2B-UN2-215E 18.2

Specialty Tapered
3 048012 P2B-UN2-300 048029 P2B-UN2-300E 18.1
3-7/16 048013 P2B-UN2-307 048030 P2B-UN2-307E 28.4
22218

Products
3-1/2 048014 † P2B-UN2-308 048031 † P2B-UN2-308E 27.0
3-15/16 048015 P2B-UN2-315 048032 P2B-UN2-315E 37.4
22220
4 048016 † P2B-UN2-400 048033 † P2B-UN2-400E 37.0
† Assembled to order. Consult DODGE for delivery.
∆ Consult DODGE for sizes not listed.
* Furnished unless otherwise specified.

UNISPHERE II - Pillow Block - Dimensions l

Shaft E F
D
Size A B C Total Bolt G H J L M R S

S-2000
Inch Min. Max. Exp. Dia.
1-7/16
1.69 6.88 1.95 4.69 5.50 5/32 1/2 0.97 0.97 3.88 2.75 1.88 0.50 1.19
1-1/2
1-11/16
1.91 7.38 2.06 5.19 5.88 5/32 1/2 0.91 1.31 4.25 3.00 2.13 0.47 1.44
1-3/4
1-15/16
1.91 8.38 2.06 5.94 6.69 5/32 5/8 1.06 1.38 4.56 3.25 2.25 0.47 1.44
2
2-3/16 2.00 8.88 2.31 6.44 7.13 5/32 5/8 1.03 1.63 5.00 3.50 2.50 0.52 1.48
2-7/16

UNISPHERE II
2.20 9.25 2.56 6.81 7.44 3/16 5/8 1.00 1.75 5.69 4.06 2.75 0.66 1.55
2-1/2
2-11/16
2-3/4
2.45 10.44 2.56 7.81 8.44 3/16 3/4 1.13 2.25 6.44 4.72 3.25 0.77 1.69
2-15/16
3
3-7/16
2.86 13.00 2.81 9.25 10.75 3/16 7/8 1.69 2.25 7.50 5.50 3.75 0.94 1.91
3-1/2
3-15/16
3.33 14.25 3.31 10.00 11.88 7/32 1 2.00 2.50 8.44 6.47 4.13 1.13 2.19
4
l Dimensions shown are for non-expansion units. The expansion bearing center and housing center are on the same centerline.

IMPERIAL
UNIFIED SAF

FEATURES/BENEFITS SPECIFICATION NOMENCLATURE SELECTION

PAGE B13-2 PAGE B13-3 PAGE B13-3 PAGE B13-4

­B13-13
Bearing Reference

DIMENSIONS
Guide

UNISPHERE II Flange Bearing - Inch

4-BOLT

B
D NOTE: All sizes use a
E-Family Roller

1/8-27 NPT hydraulic

Bearings

grease fitting

B
Specialty Tapered
Products

F
K
S-2000

C C

M
UNISPHERE II

A A

L L
IMPERIAL

J J
H H

EXPANSION NON-EXPANSION
UNIFIED SAF

FEATURES/BENEFITS SPECIFICATION NOMENCLATURE SELECTION

PAGE B13-2 PAGE B13-3 PAGE B13-3 PAGE B13-4

­B13-14
 Bearing Reference
DIMENSIONS

Guide
UNISPHERE II Flange Bearing - Inch 4-BOLT

Shaft Size Non-Expansion* Expansion

Approx. Wt.
Bearing Inch
Part No. Part Name Part No. Part Name Lbs.
∆
1-7/16 048034 F4B-UN2-107 048051 F4B-UN2-107E 5.20
22208
1-1/2 048035 F4B-UN2-108 048052 F4B-UN2-108E 5.10

E-Family Roller
1-11/16 048036 F4B-UN2-111 048053 F4B-UN2-111E 6.70
22209

Bearings
1-3/4 048037 F4B-UN2-112 048054 F4B-UN2-112E 6.70
1-15/16 048038 F4B-UN2-115 048055 F4B-UN2-115E 6.90
22210
2 048039 F4B-UN2-200 048056 F4B-UN2-200E 6.70
22211 2-3/16 048040 F4B-UN2-203 048057 F4B-UN2-203E 8.40
2-7/16 048041 F4B-UN2-207 048058 F4B-UN2-207E 10.50
22213
2-1/2 048042 F4B-UN2-208 048059 F4B-UN2-208E 10.40
2-11/16 048043 F4B-UN2-211 048060 † F4B-UN2-211E 17.30
2-3/4 048044 F4B-UN2-212 048061 † F4B-UN2-212E 17.00

Specialty Tapered
22215
2-15/16 048045 F4B-UN2-215 048062 F4B-UN2-215E 16.20

Products
3 048046 F4B-UN2-300 048063 F4B-UN2-300E 15.90
3-7/16 048047 F4B-UN2-307 048064 F4B-UN2-307E 24.70
22218
3-1/2 048048 † F4B-UN2-308 048065 † F4B-UN2-308E 30.00
3-15/16 048049 F4B-UN2-315 048066 F4B-UN2-315E 41.40
22220
4 048050 F4B-UN2-400 048067 † F4B-UN2-400E 41.00
† Assembled to order. Consult DODGE for delivery.
∆ Consult DODGE for sizes not listed.
* Furnished unless otherwise specified.

UNISPHERE II 4-BOLT FLANGE DIMENSIONS ●

S-2000
F M
Shaft Size
A B C D Bolt H J K L Total N
Inch
Dia. Exp.
1-7/16
1.69 4.75 1.91 3.53 1/2 0.75 0.56 5.00 2.75 5/32 2.44
1-1/2
1-11/16
1.91 5.13 2.16 3.91 1/2 0.75 0.72 5.50 3.00 5/32 2.75
1-3/4

UNISPHERE II
1-15/16
1.91 5.31 2.17 4.06 1/2 0.69 0.70 5.75 3.25 5/32 2.88
2
2-3/16 2.00 5.88 2.27 4.50 5/8 0.75 0.67 6.38 3.50 5/32 3.06
2-7/16
2.20 6.13 2.44 4.78 5/8 1.00 0.63 6.75 4.06 3/16 3.38
2-1/2
2-11/16
2-3/4
2.45 7.19 2.59 5.56 3/4 0.94 0.78 7.88 4.72 3/16 3.81
2-15/16
3
3-7/16
2.86 8.34 3.08 6.72 3/4 1.19 0.86 9.50 5.50 3/16 4.31
3-1/2 IMPERIAL
3-15/16
3.33 9.47 3.69 7.63 7/8 1.06 1.05 10.75 6.47 7/32 4.69
4
l Dimensions shown are for non-expansion units.
UNIFIED SAF

FEATURES/BENEFITS SPECIFICATION NOMENCLATURE SELECTION

PAGE B13-2 PAGE B13-3 PAGE B13-3 PAGE B13-4

­B13-15
Bearing Reference

DIMENSIONS
Guide

UNISPHERE II Bearing Insert With Seal - Inch

B
E-Family Roller
Bearings

D E

A SHAFT DIA
Specialty Tapered
Products

C
S-2000

Shaft Size Part

Part Approx. Wt.
Bearing Inch No.
Name Lbs.
∆ †
1-7/16 421243 BRG-UN2-107 1.5
22208
1-1/2 421244 BRG-UN2-108 1.4
1-11/16 421245 BRG-UN2-111 1.6
22209
1-3/4 421246 BRG-UN2-112 1.5
UNISPHERE II

1-15/16 421247 BRG-UN2-115 1.8

22210
2 421248 BRG-UN2-200 1.7
22211 2-3/16 421249 BRG-UN2-203 2.3
2-7/16 421250 BRG-UN2-207 4.1
22213
2-1/2 421251 BRG-UN2-208 3.9
2-11/16 421252 BRG-UN2-211 5.6
2-3/4 421253 BRG-UN2-212 5.4
22215
2-15/16 421254 BRG-UN2-215 4.8
3 421255 BRG-UN2-300 4.6
3-7/16 421256 BRG-UN2-307 9.2
IMPERIAL

22218
3-1/2 421257 BRG-UN2-308 8.6
3-15/16 421258 BRG-UN2-315 12.4
22220
4 421259 BRG-UN2-400 12.1
† Assembled-to-order size. Consult DODGE for delivery.
∆ Consult DODGE for sizes not listed.
UNIFIED SAF

FEATURES/BENEFITS SPECIFICATION NOMENCLATURE SELECTION

PAGE B13-2 PAGE B13-3 PAGE B13-3 PAGE B13-4

­B13-16
 Bearing Reference
DIMENSIONS

Guide
UNISPHERE II Bearing Insert With Seal - Inch

E-Family Roller
Bearings
Specialty Tapered
Products
S-2000
UNISPHERE II BEARING INSERT DIMENSIONS
Shaft Size
A B C D E
Inch
1-7/16
3.1496 0.95 1.69 0.56 0.29
1-1/2
1-11/16
3.3465 0.95 1.91 0.58 0.32
1-3/4
1-15/16
3.5433 0.95 1.91 0.59 0.32

UNISPHERE II
2
2-3/16 3.9370 1.03 2.00 0.64 0.32
2-7/16
4.7244 1.27 2.20 0.75 0.32
2-1/2
2-11/16
2-3/4
5.1181 1.27 2.45 0.80 0.44
2-15/16
3
3-7/16
6.2992 1.62 2.86 0.95 0.44
3-1/2
IMPERIAL
3-15/16
7.0866 1.86 3.33 1.09 0.51
4
UNIFIED SAF

FEATURES/BENEFITS SPECIFICATION NOMENCLATURE SELECTION

PAGE B13-2 PAGE B13-3 PAGE B13-3 PAGE B13-4

­B13-17
Bearing Reference

DIMENSIONS
Guide

UNISPHERE II Plummer Block Bearing - Metric

E-Family Roller
Bearings

J
F
G

M
Specialty Tapered
Products

D MIN
NOTE: All sizes use a
D MAX 1/8-27 NPT hydraulic
grease fitting
B
S-2000

S S
CL HSG CL HSG

E
UNISPHERE II

A R
A
L L
IMPERIAL

C C

EXPANSION NON-EXPANSION
UNIFIED SAF

FEATURES/BENEFITS SPECIFICATION NOMENCLATURE SELECTION

PAGE B13-2 PAGE B13-3 PAGE B13-3 PAGE B13-4

­B13-18
 Bearing Reference
DIMENSIONS

Guide
UNISPHERE II Plummer Block Bearing - Metric

Non-Expansion* Expansion Approximate

Shaft Size
Bearing Weight
∆ Part No. Part Name Part No. Part Name Kgs.
22210 50mm 048109 P2B-UN2-050M 048124 P2B-UN2-050ME 3.4
22211 55mm 048110 P2B-UN2-055M 048125 P2B-UN2-055ME 4.4

E-Family Roller
22213 60mm 048111 P2B-UN2-060M 048126 P2B-UN2-060ME 6.2

Bearings
70mm 048113 P2B-UN2-070M 048128 P2B-UN2-070ME 8.6
22215
75mm 048114 P2B-UN2-075M 048129 P2B-UN2-075ME 8.3
80mm 048115 P2B-UN2-080M 048130 P2B-UN2-080ME 12.9
22218
85mm 048116 P2B-UN2-085M 048131 P2B-UN2-085ME 12.6
† Assembled to order. Consult DODGE for delivery.
∆ Consult DODGE for sizes not listed.
* Furnished unless otherwise specified.

Specialty Tapered
METRIC UNISPHERE II - PLUMMER BLOCK - DIMENSIONS (MM) ●

Products
D E F
Shaft A B C G H J L M R S
Total Bolt
Size mm mm mm Min. Max. mm mm mm mm mm mm mm
Exp. Dia.
50mm 48 213 52 151 170 3.9 16 27 35 116 83 57.1 12 37
55mm 51 225 59 164 181 3.9 16 26 41 127 89 63.5 13 38
60mm 56 235 65 173 189 4.7 16 25 44 144 103 69.8 17 39
70mm
62 265 65 198 214 4.7 20 29 57 164 120 82.5 19 43
75mm
80mm
73 330 71 235 273 4.7 22 43 57 190 140 95.2 24 48

S-2000
85mm
l Dimensions shown are for non-expansion units. The expansion bearing center and housing center are on the same centerline.

UNISPHERE II
IMPERIAL
UNIFIED SAF

FEATURES/BENEFITS SPECIFICATION NOMENCLATURE SELECTION

PAGE B13-2 PAGE B13-3 PAGE B13-3 PAGE B13-4

­B13-19
Bearing Reference

DIMENSIONS
Guide

UNISPHERE II Flange - Metric

4-BOLT

NOTE: All sizes use a

E-Family Roller

1/8-27 NPT hydraulic C C

Bearings

B grease fitting
D M

N A
A
B
L L
Specialty Tapered

D
Products

J J
H H
F EXPANSION NON-EXPANSION
K
S-2000

Shaft Size Non-Expansion* Expansion Approx. Wt.

Bearing
∆ Part No. Part Name Part No. Part Name Kgs.
40mm 048202 F4B-UN2-040M 048216 F4B-UN2-040ME 3.1
22209
45mm 048203 F4B-UN2-045M 048217 F4B-UN2-045ME 3.1
22210 50mm 048204 F4B-UN2-050M 048218 F4B-UN2-050ME 3
22211 55mm 048205 F4B-UN2-055M 048219 F4B-UN2-055ME 3.8
60mm 048206 F4B-UN2-060M 048220 F4B-UN2-060ME 4.8
22213
65mm 048207 F4B-UN2-065M 048221 F4B-UN2-065ME 4.6
UNISPHERE II

22215 70mm 048208 F4B-UN2-070M 048222 F4B-UN2-070ME 8.2

22218 80mm 048210 F4B-UN2-080M 048224 F4B-UN2-080ME 11.2
∆ Consult DODGE for sizes not listed.
* Furnished unless otherwise specified.

METRIC UNISPHERE II - 4-BOLT FLANGE - DIMENSIONS (mm) ●

F M
Shaft
A B C D Bolt H J K L Total N
IMPERIAL

Size
Dia. Exp.
40mm
48 130 55 99 12 19 18 140 76 3.9 70
45mm
50mm 48 135 55 103 12 18 18 146 82 3.9 73
55mm 51 149 58 114 16 19 17 162 89 3.9 78
60mm
56 156 62 121 16 25 16 171 103 3.9 86
65mm
70mm 62 183 66 141 20 24 20 200 120 4.7 97
UNIFIED SAF

80mm 73 212 78 171 20 30 22 241 140 4.7 109

l Dimensions shown are for non-expansion units.

FEATURES/BENEFITS SPECIFICATION NOMENCLATURE SELECTION

PAGE B13-2 PAGE B13-3 PAGE B13-3 PAGE B13-4

­B13-20
 Bearing Reference
DIMENSIONS

Guide
UNISPHERE II Bearing Insert With Seal - Metric

E-Family Roller
Bearings
D E

A SHAFT DIA

Specialty Tapered
Products
C

S-2000
UNISPHERE ll Bearing Insert UNISPHERE Il Bearing Insert
W/Seals Metric Dimensions-Metric
Bearing Shaft Approx.
Part Shaft A B C D E
Size Part Name Wt.
No. Size mm mm mm mm mm

UNISPHERE II
∆ Kgs.
40mm 421362 BRG-UN2-040 0.80 40mm
22209 85 24 48 14.7 7.26
45mm 421363 BRG-UN2-045 0.70 45mm
22210 50mm 421364 BRG-UN2-050 0.75 50mm 90 24 48 15.1 8.05
22211 55mm 421365 BRG-UN2-055 1.06 55mm 100 26 51 16.4 8.05
60mm 421366 BRG-UN2-060 1.95 60mm
22213 120 32.2 56 19.0 8.05
65mm 421367 BRG-UN2-065 1.74 65mm
70mm 421368 BRG-UN2-070 2.37 70mm
22215 130 32.3 62 20.2 11.2
75mm 421369 BRG-UN2-075 2.09 75mm
80mm 421370 BRG-UN2-080 4.54 80mm
22218 85mm 421371 BRG-UN2-085 4.20 85mm 160 41.3 73 24.1 11.2 IMPERIAL
90mm 421372 BRG-UN2-090 3.90 90mm
∆ Consult DODGE for sizes not listed.
UNIFIED SAF

FEATURES/BENEFITS SPECIFICATION NOMENCLATURE SELECTION

PAGE B13-2 PAGE B13-3 PAGE B13-3 PAGE B13-4

­B13-21
 ­B13-22
NOTES
Bearing Reference E-Family Roller Specialty Tapered S-2000 UNISPHERE II IMPERIAL UNIFIED SAF
Guide Bearings Products