Tracked Cone Range | Quarrying • Contracting

TEREX Pegson Ltd

Mammoth Street, Coalville, Leicestershire, LE67 3GN, England.
Tel: +44 (0) 1530 518 600 Fax: +44 (0) 1530 518 618
email [email protected] • www.bl-pegson.com

US Office
TEREX Crushing and Screening Inc.11001 Electron Drive,
Louisville, Kentucky, 40299 USA.
Tel: +1 502 736 5200 • Fax: +1 502 736 5202

TEREX España
Ctra de Valencia, Km 23,000
28500 Arganda del Rey (Madrid) España
Tel: +34 918 719 253 • Fax: +34 918 719 870

TEREX Construction France

39 Rue De Peupliers
92752 Nanterre Cedex
Tel: 01 56 83 83 50 • Fax: 01 64 11 90 81
US office, TEREX España and TEREX Construction France are not ISO 9001 registered.

FINANCIAL SERVICES

Your Local Authorised BL-Pegson Dealer:

All reasonable steps have been taken to ensure the accuracy of this publication, however due
to a policy of continual product development we reserve the right to change specifications
without notice. MODELS
Plant performance figures given in this brochure are for illustration purposes only and will vary
depending upon various factors, including feed material gradings and characteristics. 1000 MAXTRAK
No information relating to capacity or performance contained within this publication is intended 1300 MAXTRAK
to be, nor will be, legally binding.
1000 SR
Photographs may show some machines fitted with optional extras.
For further information, please check with your Dealer or BL-Pegson Limited.
Publication No: Track Cone/Mar/05/Issue: 1
TRACKED
CONE RANGE

THE RIGHT CHOICE

In today’s market you need an edge over your competitors and

TEREX Pegson has the solution. Our tracked cone range has been

designed to meet the stringent demands of our customers. Where

high throughput, big reduction and excellent product shape is

required then this plant is the right choice.

Backing up this line of crushing products is a network of dealers

dedicated to providing fast and reliable product support in your

locality.
 1000 MAXTRAK

DESIGNED TO

PERFORM
TEREX Pegson leads the world with the high performance 1000
Maxtrak crusher that has been designed for direct feed
applications without pre-screening on clean rock.
At the heart of the Maxtrak is the Automax cone crusher with hydraulic setting,
tramp release and unblocking system. Its unique crushing action produces high
quality aggregate and sub-base material. Available with a choice of four liners
and two "eccentric" throws it will give excellent capacity, high reduction and
good product cubicity.
The Maxtrak plants are fitted with a feed hopper that enables the Automax to be
continually choke fed. This is essential for all cone crushers to maximise the
reduction and manganese life as well as for optimal product shape. A level probe
over the feed ring regulates the feed belt to ensure the Automax is perfectly fed.

Advantages
AUTOMAX MAXIMUM FEED SIZE TYPICAL CLOSED SIDE SETTINGS AND CAPACITIES 4 Accepts clean all in feed
An optional feed hopper level probe is available for applications where the source of the CRUSHER 4 No need for pre-screening on most applications
feed is intermittent and unable to keep the cone crusher continuously choke fed. MODEL mm 19mm 22mm 25mm 28mm 32mm
CSS 4 Excellent product shape
To achieve optimum performance the crusher should be fed with well graded material from 1000 MC
4 High reduction
the maximum feed size down to zero. Any fines in the feed should be clean crushed rock. Long Throw 160 mtph 155 170 180 195 210 4 Hydraulic crusher setting
4 Metal detector fitted as standard
An optional short throw eccentric is available as a special order for the 1000 Automax for 1000 C 175 mtph 220 4 Hydraulic release
175 187 205
tight settings and particularly abrasive applications. Long Throw
4 Feed hopper level control for continuous choke
For further details please contact your TEREX Pegson dealer. 1000 XC feeding
195 mtph 195 215 230
Long Throw 4 Dust suppression sprays fitted as standard
The plant performance and minimum setting capability will depend on feed
material condition, grading and density. Unit Components

Crusher type: TEREX Pegson 1000 Automax Crusher

Transport Dimensions TYPICAL CLOSED SIDE SETTINGS AND CAPACITIES
AUTOSAND MAXIMUM fitted with long throw eccentric.
CRUSHER FEED
Length: 15.1m MODEL SIZE CSS 13mm 16mm 19mm Feeder: 1m wide x 5.4m long belt feeder.
Width: 2.8m
Feed Hopper: Hardox steel fixed feed hopper
1000
Long 63 mm mtph 120 130 145
Hopper length: 3.28m
Height: 3.45m Throw Hopper width: 2.5m
Capacity: Up to 4.4m3
5 HIGH PRODUCTION CAPACITY 5 The 1000 Maxtrak has been designed to maximise The plant performance and minimum setting capability will depend
A Maxtrak on a limestone application. throughput, reduction and product shape in a wide Weight: 31 tonnes on feed material condition, grading and density. Powerpack: Caterpillar C-9, 250kW at 1800rpm
range of quarrying applications.
at sea level
 1300 MAXTRAK

DESIGNED TO

DELIVER
The 1300 Maxtrak is TEREX Pegson’s largest tracked cone crusher
and is suitable for secondary and tertiary applications and as a
primary crusher on gravel crushing applications with capacities
up to 350 mtph.
Based around the unbeatable 1300 Automax cone crusher, the 1300 Maxtrak
features a system with a large feed hopper which is able to take an 'all-in feed’ from
the jaw crusher, thereby improving cubicity, throughput and reduction ratios whilst
keeping capital costs to a minimum.
Setting adjustment can be made ‘on the run’ using the touch button controls. Dust
suppression sprays and metal detection are both included as standard. Without
question, the 1300 Maxtrak is one big step ahead of the competition in its size,
productivity and operating efficiency.

A range of optional extras are available including a

1300 Automax Medium Coarse Concave
Autosand concave, feed hopper extension plates
and a electric refuelling pump. 1300 Standard: Maximum Feed Size 220 mm

Advantages The plant performance and minimum setting capability will depend on feed material
condition, grading and density.
4 Excellent product shape
4 High reduction ratios CSS 25 mm 28 mm 30mm 32mm

4 No need for pre-screening on most 5HIGH CAPACITIES

mtph 285 300 325 350 The 1300 Maxtrak is capable of capacities up to 350 mtph depending
applications 5 FEED HOPPER 5 FEED BOX on the type of material.
Heavy duty Hardox feed hopper with Fabricated to control choke feed
4 Metal detection impact channels to protect feed belt. with level probe to monitor the flow
of material through the crusher. 1300 Autosand Unit Components
4 Self-contained diesel driven plant Transport Dimensions
CONTROL
4 Crusher level controls fitted as standard 1300 Standard: Maximum Feed Size 63 mm Crusher type: Terex Pegson 1300 Automax Crusher.
PANEL 4 Length: 16.0m
4 3.5m high product discharge conveyor The Automax hydraulic
control panel enables The plant performance and minimum setting capability will Feeder: 1.3m wide x 5.4m long belt feeder
4 Hydraulic crusher setting adjustment an operator to change depend on feed material condition, grading and density. Width: 3.0m Feed Hopper: Hardox steel fixed feed hopper
the crusher setting in
4 Simple electrical and hydraulic circuits seconds without Hopper length: 3.5m
stopping and gives CSS 16 mm 19 mm 22mm Height: 3.81m
4 Choice of concave read out of manganese Hopper width: 2.79m
wear condition.
4 Capacities of up to 350 TPH mtph 200 220 240
Capacity: Up to 7.0m3
Weight: 46 tonnes
Powerpack: Caterpillar C-12, 327kW at 1800rpm
4 Dust suppression sprays fitted as standard
at sea level
 MAXTRAK 1000SR

DESIGNED FOR

SUCCESS
The TEREX Pegson 1000SR combines the incredible 1000
Automax cone crusher and a double deck screen to
provide a complete crushing and screening process on a
single chassis for secondary and tertiary applications.
The 1000SR is able to produce one, two or three stockpiles using the
optional stockpiler or recirculate the oversize for recrushing. Material
crushed by the Automax is transferred to a double deck screen and
oversize material can be re-circulated back to the cone crusher via an
on-board conveyor to produce two stockpiles of graded aggregate.

Unit Components
Optional equipment available with this machine Transport Dimensions Crusher Options
includes a 500mm wide stockpiling conveyor and Concave Max feed size
Crusher type: Terex Pegson 1000 Automax Crusher
Length: 17.2m The plant performance will depend
choice of concaves – Automax extra coarse, on feed material condition, grading fitted with long throw eccentric as standard
Medium coarse 160mm and density. As a general guide
coarse, medium coarse and Autosand. Width: 3.1m use the 1000 Maxtrak page for
Coarse 175mm
performance however these Feeder: 1m wide x 5.4m long belt feeder
Height: 3.45m Extra coarse 195mm
figures will be affected by screen
meshes used and the quantity of Feed Hopper: Hardox steel fixed feed hopper
recirculated material.
Advantages Weight: 38 tonnes Autosand 63mm Hopper length: 3.14m
4 Combined crushing and screening in one Hopper width: 2.54m
plant Capacity: Up to 4.4m3
4 Proven and unique Automax technology
Powerpack: Caterpillar C-9, 257kW at 1800rpm
at sea level
4 Able to accept "all in feed" in most cases
4 Able to recirculate oversize material
4 Excellent product shape on most
applications
4 High reductions
5 CONVEYOR
4 Capable of producing three products from
This conveyor can be used to recirculate 5 SCREEN
one plant using optional stockpiler oversize from the top deck to the Automax for The screen can
recrushing or as shown in the photograph, it 5 SCREENED PRODUCT
4 Heavy duty chassis and track frame be lowered for
The 1000SR has the ability to produce one, two,
can be used to stockpile oversize material at maintenance
4 Dust suppression sprays fitted as standard the side of the plant. purposes. or three products sizes.
5 OPTIMUM PERFORMANCE
1180 Premiertrak feeding a 1000SR.
 COMBINATION PLANTS

SETTING THE

S TA N D A R D
TEREX Pegson’s combination crushing plants are the bench mark
for operators who require high performance tracked crushers.
A key advantage with this range of equipment is its ability to work in tandem with
other machines in multiple product operations. A combination of tracked jaw, cone
and impact crushers can be used together with tracked screens to give a variety of
different plant configurations.

AFTER SALES
Our dealers are committed to supporting every aspect of your operation from supplying
products and spare parts to commissioning and servicing equipment. Their expertise will
help you to improve productivity and lower operating costs throughout the working life of
your machine.

PARTS
At TEREX Pegson we know the right parts can make the difference to the efficiency and
performance of your equipment so when you buy TEREX Pegson parts you are can expect:
4 Availability 4 Competitive prices 4 Warranty compliance
4 Fast delivery 4 Specification compliance
FINANCIAL SOLUTIONS
TEREX Financial Solutions simplify capital equipment purchase by offering finance
arrangements and customised payment plans to suit your business requirements.
(Available subject to status and location.)

WARRANTY
Subject to our sales terms and conditions all new TEREX Pegson crushing plants carry a
12 month warranty.

5 An 1165 Premiertrak feeding into a 1000SR on a quarry application. 5 Two stage crushing showing a 1165 Premiertrak feeding a Maxtrak 5 1165 Premiertrak working with a 1000 Maxtrak to 5 An 1180 Premiertrak feeding 1300 Maxtrak 5 An 1180 Premiertrak feeding a 1300 Maxtrak to
1000 producing sub-base material. produce 40mm sub-base on a basalt application. producing type 1 sub-base at 300tph produce road base material.