4 CR, CRI, CRN, CRT,

CRE, CRIE, CRNE, CRTE

4. Identification
Identification

Code Description

Materials
A Basic version
Type key B Tungsten carbide / Tungsten carbide
C Carbon free pump
Example CR E 32 s -4 -2 -A -F -G -E -HQQE
D Carbon-graphite filled PTFE (bearings)/Tungsten carbide
Type range: E Pickled and passivated (Only Japan)
CR, CRI, CRN, CRT H Flanges and base plate EN 1.4408
Pump with integrated frequency K Bronze (bearings)/Tungsten carbide
converter L Motor stool, base plate and flanges EN 1.4408
Flow rate [m3/h] Motor stool, base plate, coupling and flanges EN 1.4408
Undersize impeller (all impellers) M and coupling guards in cobber. Bolts, nuts and spacing
CR 1s, CRI 1s, CRN 1s pipes EN 1.4401 or higher grade
N Flanges EN 1.4408
Number of impellers
P PEEK neck ring
Number of reduced-diameter impellers Silicon carbide/Silicon carbide bearing in pump and
CR, CRE, CRN, CRNE 32, 45, 64 Q Silicon carbide/Silicon carbide seal faces in thrust
Code for pump version handling device
Code for pipe connection R Silicon carbide/Silicon carbide bearing
S PTFE neck rings
Code for materials
T Base plate EN 1.4408
Code for rubber parts Silicon carbide/Silicon carbide bearing in pump and
Code for shaft seal U Silicon carbide/Tungsten carbide seal faces in thrust
handling device
Key to codes X Special version
Code for rubber parts in pump
Code Description
E EPDM
Pump version
F FXM (Fluoraz®)
A Basic version K FFKM (Kalrez®)
B Oversize motor N Neoprene
C CR compact V FKM (Viton®)
D Pump with pressure intensifier*
Shaft seal type designation
E Pump with certificate
A O-ring seal with fixed driver*
F Pump for high temperatures (with air-cooled top)
H Balanced cartridge seal with O-ring
G E-pump without control panel
O Double seal, back-to-back*
H Horizontal version
P Double seal, tandem*
I Different pressure rating
X Special version*
J E-pump with a different maximum speed
K Pump with low NPSH Seal face material
L Pump including Grundfos CUE and certificate B Carbon, synthetic resin-impregnated
M Magnetic drive U Cemented tungsten carbide
N With sensor Q Silicon carbide
O Cleaned and dried X Other ceramics*
P Undersize motor Secondary seal material (rubber parts)
Q High-pressure pump with high-speed MGE motor*
E EPDM
R Belt driven pump
F FXM (Fluoraz®)
S High-pressure pump
K FFKM (Kalrez®)
T Thrust handling device*
V FKM (Viton®)
U ATEX approved pump
V Cascade function * Option. See the CR "Custom-built pumps" data booklet available on
Grundfos Product Center. See QR code or link below.
W Deep-well pump with ejector*
X Special version
Y Electropolished
Z Pumps with bearing flange
Pipe connection
A Oval flange
http://net.grundfos.com/qr/i/96486346
B NPT thread
CA FlexiClamp Shaft seal
CX Triclamp*
F DIN flange Example -H -Q -Q -E
FC DIN 11853-2 flange (collar flange) Shaft seal type designation
FE EN 1092-1, type E Material of rotating seal face
G ANSI flange
Material of stationary seal face
J JIS flange
N Changed diameter of ports Material of secondary seal (rubber parts)
P PJE coupling (Victaulic type)
X Special version

10