Scribd
Upload
79 views

DSLogic U3Pro32 Datasheet

This document describes the DSLogic U3Pro32 USB logic analyzer. It has 32 digital input channels, a USB 3.0 interface, and can sample up to 1GHz. It has 2GB of hardware memory, supports sample depths up to 16GB in stream mode, and adjustable thresholds from 0-5V in 0.1V steps. The device is powered via USB and housed in an unibody aluminum case.

Uploaded by

norbertscribd
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
79 views

DSLogic U3Pro32 Datasheet

This document describes the DSLogic U3Pro32 USB logic analyzer. It has 32 digital input channels, a USB 3.0 interface, and can sample up to 1GHz. It has 2GB of hardware memory, supports sample depths up to 16GB in stream mode, and adjustable thresholds from 0-5V in 0.1V steps. The device is powered via USB and housed in an unibody aluminum case.

Uploaded by

norbertscribd
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

DSLogic U3Pro32

USB-based Logic Analyzer

Key Features
 32 digital channels
 USB 3.0 interface
 Up to 1GHz sample rate
 Up to 2Gbits hardware memory
 Up to 16G sample depth (stream mode)
 Adjustable Threshold (0.1V Step)
 Shielded fly wires
 Unibody aluminum case
 3-year warranty

Connectivity
 USB Type-C interface (USB3.0 device port)
 1.27mm dupont female connector (Host device)
 2.54mm dupont female connector (Fly wires)

Power Source
 Power source voltage: 5VDC±5%
 Power consumption: 2.5W maximum

Input output ports


Direction Descriptions Protected Voltage Range
USB 3.0 port InOut Connect to host computer 4.75v ~ 5.25v
CH0 ~ CH15 Input Connect to under test signals -30v ~ 30v (with fly wires)
CK Input Clock input at state sample mode 0v ~ 3.3v (Max 50MHz)
TI Input Reserved 0v ~ 3.3v
TO Output External trigger signal output --

Designed to make your work enjoyable


DSLogic U3Pro32 is an USB-based logic analyzer, which has a portable size (79x74x9mm), but powerful
performance (up to 1GHz sample rate, USB 3.0 interface). With the easy-to-use and cross platform software,
DSView, you can use your favorite computer to debug and analysis your circuits, observe the digital wave and
decoder various protocols at anywhere and anytime.
1 www.dreamsourcelab.com
DSLogic U3Pro32 Datasheet
Technical Specifications

Input Voltage and Thresholds


Safe voltage range: -30v ~ 30v (with fly wires)
Threshold voltage: 0v ~ 5v (0.1v step)
Work with most of logic voltage level (such as: 5v, 3.3v, 2.5v, 1.8v, 1.5v, 1.2v, 1.0v, etc.)
ESD protected

Input Impedance
250KΩ // ~13pF

Max Sample Rates


Buffer mode Stream mode
8 channels: 1GHz 3 channels: 1GHz
16 channels: 500MHz 6 channels: 500MHz
32 channels: 250MHz 12 channels: 250MHz
-- 30 channels: 100MHz
-- 32 channels: 50MHz

Max Sample Depth


Buffer mode (without RLE compression): 2G / num. of channels
Buffer mode (with RLE compression): 16G / num. of channels
Stream mode: 16G

Error/Accuracy
Minimum acquisition pulse: 2ns
Acquisition Accuracy: ±sample interval (for example: ±10ns@100M sample rate, ±1us@1M sample rate)

Noise Immunity
Each channel provides independent shielding ground.

System Requirements
Windows XP, Vista, Win7, Win8 & Win10
Mac OS X 10.12 or above
Linux: recent Ubuntu, Fedora, Arch, etc.
USB 3.0 Host port

www.dreamsourcelab.com 2
DSLogic U3Pro32 DataSheet
Safety & Caution
 If you are using a mains powered (grounded) host computer, the ground terminals of DSLogic are also
connected to the real ground, you must avoid to connect any ground terminals to HOT DUTs.
 DSLogic has the overcurrent protection, but we recommend that you should try to avoid any short circuit
event. After all the ability of upstream USB port is an uncertain factor.

Revision History
The following table shows the revision history for this document.
Date(DD/MM/YY) Version Revision
20/06/20 v1.1 Add CK max frequency
18/02/20 v1.0 Initial release (based on DSView v1.10)

3 www.dreamsourcelab.com

You might also like