Scribd
Upload
24 views4 pages

Brocure Protective Marine

This document provides information on protective and marine coatings from Merah Putih Paint, including: 1. A chart describing the recommended paint systems for various marine coating applications, listing the primers, intermediates, and finishes. 2. A table categorizing different levels of corrosivity and the typical interior and exterior environments in each category. 3. Lists of available alkyd, epoxy, acrylic, polyurethane, and heat resistant coating products from Merah Putih Paint and their descriptions. 4. Contact information for Merah Putih Paint, an Indonesian manufacturer of protective coatings.

Uploaded by

Angga
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
24 views4 pages

Brocure Protective Marine

This document provides information on protective and marine coatings from Merah Putih Paint, including: 1. A chart describing the recommended paint systems for various marine coating applications, listing the primers, intermediates, and finishes. 2. A table categorizing different levels of corrosivity and the typical interior and exterior environments in each category. 3. Lists of available alkyd, epoxy, acrylic, polyurethane, and heat resistant coating products from Merah Putih Paint and their descriptions. 4. Contact information for Merah Putih Paint, an Indonesian manufacturer of protective coatings.

Uploaded by

Angga
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

INDUSTRIAL-PROTECTIVE-MARINE-DECORATIVE

PAINT & COATING

BROCURE
PROTECTIVE & MARINE
PROTECTIVE COATINGS FOR EVERY ASSET
ACROSS MARKET
INDUSTRIAL STEEL CONSTRUSTION & MARINE.
PROTECTIVE & MARINE
COATING

7
4
6 3
9 2
5 1

PAINT SYSTEM MARINE COATING


DESCRIPTION POSITION PRIMER ( 1ST) INTERMEDIATE ( 2nd) FINISH (3rd)

MERPUT POX STP 1612 MERPUT MAXIMA AF 1520 /


UNDER WATER BOTTOM (1) MERPUT POX STP 1612
/ MERPUT POX TC 1613 MERPUT PERFORMA AF 1521

MERPUT POX STP 1612 MERPUT MAXIMA AF 1520 /


VERTICAL (2) MERPUT POX STP 1612
/ MERPUT POX TC 1613 MERPUT PERFORMA AF 1521

MERPUT POX STP 1612 MERPUT MAXIMA AF 1520 /


BOAT TOP (3) MERPUT POX STP 1612
/ MERPUT POX TC 1613 MERPUT PERFORMA AF 1521

TOP WATER TOP SIDE (4) MERPUT POX STP 1612 - MERPUT THANE F 1720
EXT.BULWARK (5) MERPUT POX STP 1612 - MERPUT THANE F 1720
DECK IN.BULWARK (6) MERPUT POX STP 1612 - MERPUT THANE F 1720
MERPUT POX STP 1612/
MAIN DECK (7) MERPUT POX STP 1612 -
MERPUT THANE F 1720
MERPUT POX STP 1612 /
MERPUT POX TAR 1636 /
ACCSESSORIES ANCHORE , CHAIN (9) MERPUT POX TAR 1636 -
MERPUTBITUMIN 1030
/ MERPUTBITUMIN 1030

MAINTENANCE SUPER STRUCTURE (8) MERPUT KYD ZP 1411 - MERPUT KYD ENAMEL 1421
PROTECTIVE & MARINE
COATING

Corrosivity
Corrosivity Exterior Interior
Catagories
Catagories ( Typical Environments) (Typical Environments)
& Risk
Heated buildings with clean atmospheres,
CI Very low - e.g. offices, shops, schools, hotels

Atmospheres with low level of Unheated buildings where condensation


C2 Low pollution, mostly rural areas can occur, e.g. depots, sports halls
Urban and industrial atmospheres, Production rooms with high humidity and
moderate sulphur dioxide pollution. some air pollution e.g. food-processing
C3 Medium Coastal areas with low salinity plants, breweries, dairies
Industrial areas and coastal areas Chemical plants, swimming pools, coastal
C4 High with moderate salinity ship and boatyards
Industrial areas with high humidity Buildings or areas with almost
and aggressive atmosphere and
C5 Very high coastal areas with high salinity
permanent condensation and with
high pollution
Offshore areas with high salinity
and industrial areas with extreme
Industrial areas with extreme
CX Extreme humidity and aggressive
atmosphere and sub-tropical and humidity and aggressive atmosphere
tropical atmospheres

COATING ALKYD
MERPUTKyd ZP 1411 Alkyd primer ZP
MERPUTKyd ZC 1412 Alkyd Zinc Chromate
MERPUTKyd Enamel 1421 Alkyd Finish
MERPUTKyd FD 1420 Alkyd Finish FD

COATING EPOXY
MERPUTPox Zinc 1614 Epoxy Zinc Rich
MERPUTPox STP 1612 Epoxy Mastic
MERPUTPox Lining 1633 Epoxy HS Lining
MERPUTPox Mio 1610 HB Epoxy Mio
MERPUTPox SP 1611 Epoxy Shop Primer
MERPUTPox ST 1635 Epoxy Primer Finish

COATING ACRYLIC COATING PU


MERPUTCryl Primer MERPUThane F 1720 PU Finish
MERPUTCryl Finish MERPUThane PF 1730 PU Primer Finish

COATING HEAT RESITANT


MERPUTherm 200C 1820 HR Up to 200C
MERPUTherm 400C 1840 HR Up to 400C
MERPUTherm 600C 1860 HR Up to 600C
Contact Us
Kawasan Industri Jababeka I ,
SFB Blok U-19N, Cikarang Utara
17530 ,
Kab. Bekasi – Jawa Barat , Indonesia.
Phone: (021) - 50208099
Manufactured by : Email: [email protected]
Web: www.merahputihpaint.co.id
PT. FAUZI MANUFAKTURING INDUSTRI
COST, QUALITY, DELIVERY & SERVICES

You might also like