BITZER Output data

Created on : 1/23/2023 3:47:27 PM

 Raudhatul Yuniasrih
0420040019

BITZER Software v6.17.9 rev2773 1/23/2023 / All data subject to change. 2/7

Table of content

Project survey............................................................................................................................................................ 3
Selection: Semi-hermetic Screw Compressors HS................................................................................................... 4
Technical Data: HSK6461-60.................................................................................................................................... 5
Technical Data: HSK7451-70.................................................................................................................................... 6
Information: Semi-hermetic Screw Compressors HS................................................................................................ 7
 Raudhatul Yuniasrih
0420040019

BITZER Software v6.17.9 rev2773 1/23/2023 / All data subject to change. 3/7

Project survey
Selected compressors
Semi-hermetic Screw Compressors HS 1x HSK6461-60

Chosen accessory
Please select a type
 Raudhatul Yuniasrih
0420040019

BITZER Software v6.17.9 rev2773 1/23/2023 / All data subject to change. 4/7

Selection: Semi-hermetic Screw Compressors HS

Input Values
Cooling capacity 100.0 kW
Refrigerant R404A
Reference temperature Dew point temp.
Evaporating SST -10.00 °C
Condensing SDT 45.0 °C
Liq. subc. (in condenser) 0K
Suct. gas superheat 10.00 K
Operating mode Standard
Power supply 400V-3-50Hz
Useful superheat 100%
Additional cooling External oil cooling
Max. discharge gas temp. 80.0 °C

Result
Compressor HSK6461-60-40P HSK7451-70-40P
Capacity steps 100% 100%
Cooling capacity 86.4 kW 104.2 kW
Cooling capacity * 86.4 kW 104.2 kW
Evaporator capacity 86.4 kW 104.2 kW
Power input 47.2 kW 57.8 kW
Current (400V) 76.1 A 92.3 A
Voltage range 380-415V 380-415V
Condenser capacity 133.6 kW 162.0 kW
COP/EER 1.83 1.80
COP/EER * 1.83 1.80
Mass flow LP 3063 kg/h 3696 kg/h
Mass flow HP 3063 kg/h 3696 kg/h
Operating mode Standard Standard
Liquid temp. 44.7 °C 44.7 °C
Oil volume flow 1.33 m³/h 1.93 m³/h
Discharge gas temp. w/o cooling 78.1 °C 78.8 °C

Additional cooling/ Limitations (see Limits)!

*According to EN12900 (10K suction gas superheat, 0K liquid subcooling)

Application Limits Standard HSK6461-60, HSK7451-70

Legend
max. tc for frequencies = 20Hz

max. tc for frequencies = 25Hz

max. tc for frequencies = 35Hz

 Raudhatul Yuniasrih
0420040019

BITZER Software v6.17.9 rev2773 1/23/2023 / All data subject to change. 5/7

Technical Data: HSK6461-60

Dimensions and Connections

Technical Data
Technical Data
Displacement (2900 RPM 50 Hz) 165 m³/h
Displacement (3500 RPM 60 Hz) 198 m³/h
Weight 246 kg
Max. pressure (LP/HP) 19 / 28 bar
Connection suction line 54 mm - 2 1/8''
Connection discharge line 42 mm - 1 5/8''
Adapter/shut-off valve for ECO 22 mm - 7/8'' (Option)
Adapter for liquid injection 16 mm - 5/8'' (Option)
Oil type R22 B150SH, B100 (Option)
Oil type R134a/R404A/R507A/R407A/R407F BSE170
Oil type R448A/R449A/R454C BSE170
Motor data
Motor version 1
Motor voltage (more on request) 380-415V PW-3-50Hz
Max operating current 98.0 A
Starting current (Rotor locked) 267.0 A D / 449.0 A DD
Max. Power input 65.0 kW
Extent of delivery (Standard)
Discharge gas temperature sensor Standard
Start unloading Standard
Oil flow control SE-B3 (Standard)
Motor protection SE-E1 (Standard), SE-E3 (Standard for 660-690V)
Suction shut-off valve Standard
Capacity control 100-75-50% (Standard)
Enclosure class IP54
Available Options
Discharge shut-off valve Option
ECO connection with shut-off valve Option
Motor protection SE-i1 (200-690V)
Sound measurement
Sound power level (-10°C / 45°C) 87,0 dB(A)
Sound pressure level @ 1m (-10°C / 45°C) 79,0 dB(A)
 Raudhatul Yuniasrih
0420040019

BITZER Software v6.17.9 rev2773 1/23/2023 / All data subject to change. 6/7

Technical Data: HSK7451-70

Dimensions and Connections

Technical Data
Technical Data
Displacement (2900 RPM 50 Hz) 192 m³/h
Displacement (3500 RPM 60 Hz) 232 m³/h
Weight 305 kg
Max. pressure (LP/HP) 19 / 28 bar
Connection suction line 76 mm - 3 1/8''
Connection discharge line 54 mm - 2 1/8''
Adapter/shut-off valve for ECO 22 mm - 7/8'' (Option)
Adapter for liquid injection 16 mm - 5/8'' (Option)
Oil type R22 B150SH, B100 (Option)
Oil type R134a/R404A/R507A/R407A/R407F BSE170
Oil type R448A/R449A/R454C BSE170
Motor data
Motor version 1
Motor voltage (more on request) 380-415V PW-3-50Hz
Max operating current 124.0 A
Starting current (Rotor locked) 290.0 A D / 485.0 A DD
Max. Power input 75.0 kW
Extent of delivery (Standard)
Discharge gas temperature sensor Standard
Start unloading Standard
Oil flow control SE-B3 (Standard)
Motor protection SE-E1 (Standard), SE-E3 (Standard for 660-690V)
Suction shut-off valve Standard
Capacity control 100-75-50% (Standard)
Enclosure class IP54
Available Options
Discharge shut-off valve Option
ECO connection with shut-off valve Option
Motor protection SE-i1 (200-690V)
Sound measurement
Sound power level (-10°C / 45°C) 86,0 dB(A)
Sound pressure level @ 1m (-10°C / 45°C) 78,0 dB(A)
 Raudhatul Yuniasrih
0420040019

BITZER Software v6.17.9 rev2773 1/23/2023 / All data subject to change. 7/7
Semi-hermetic Screw Compressors HS

Semi-hermetic Screw Compressors HS

HSK = Application for air-conditioning and medium temperature cooling.
HSN = Application for low temperature cooling.

Notes regarding application limits (see "Limits")

* Ranges are valid for standard operation and at full-load conditions.
* With high pressure conditions, part-load operation is partly limited (see application limits in applications manual SH-100).
* With Economizer operation the maximum admissible evaporation temperature is shifted by 10 K downward (otherwise
there is a danger of excessive compression and overload of the motor because of a higher mass flow). At pull-down
conditions from higher evaporation temperatures, the ECO injection must remain closed until the evaporation temperature is
below the maximum admissible value and a stable operation is achieved (e.g. control of the ECO solenoid valve by means
of a low pressure cut-out). The use of the ECO-system with higher evaporation temperatures requires individual consultation
with Bitzer.

HS 64/74
* Capacity control with ECO operation at the same time is limited to one single regulating step (CR 75 %). At CR 50 % the
ECO injection should be closed.

Data for sound emission

Data are based on 50 Hz application (IP-units 60 Hz) and R404A.
Sound pressure level: values are based on open air test sites with semi-spherical sound emissions at 1 meter distance. For
further information see Technical Information "Sound Data".
Legend of connection positions according to "Dimensions":
1 High pressure connection (HP)
Connection for high pressure switch (HP)
1a Additional high pressure connection (HP)
Not suitable for pressure switch or pressure transmitter!
1b Connection for high pressure transmitter (HP)
2 Low pressure connection (LP)
Connection for low pressure switch
2a Additional low pressure connection (LP)
2b Connection for low pressure transmitter (LP)
2c Low pressure connection for the minimum pressure differential control valve
3 Connection for discharge gas temperature sensor (HP)
4 Connection for economiser (ECO)
HS.85: ECO valve with connection line (option)
OS.85, OS.95, OS.105, HS.95: ECO valve (option)
5 Connection/valve for oil injection
6 Oil pressure connection
7 Oil drain (compressor or motor housing)
7a Oil drain (suction gas filter)
7b Oil drain from shaft seal (maintenance connection)
7c Oil drain hose (shaft seal)
8 Threaded bore for foot fastening
9 Threaded bore for pipe fixture (ECO and LI lines)
10 Maintenance connection for oil filter
11 Oil drain (oil filter)
13 Oil filter monitoring
14 Oil flow switch
15 Earth screw for housing
16 Pressure blow-off (oil filter chamber)
17 Maintenance connection for shaft seal
18 Liquid injection (LI)
19 Compressor module
20 Slider position indicator
21 Oil level switch
22 Oil pressure transmitter
23 Connection for oil and gas return (for systems with flooded evaporator adaptor optional)
24 Access to oil circulation restrictor
25 Oil inlet for shaft seal cooling
26 Oil outlet for shaft seal cooling
27 Temperature sensor in the shaft seal
28 Vibration sensor connection
SL Suction gas line
DL Discharge gas line
Dimensions can show tolerances according to EN ISO 13920-B.