Scribd
Upload
13 views

Week 05 - Topology

1. The document discusses network architecture and topologies. It defines network architecture as the design of computers and devices in a network. 2. There are two main network architectures - client/server and peer-to-peer. Client/server has servers providing services to client computers. Peer-to-peer connects computers as equals to share resources. 3. Network topologies refer to the layout of connected devices. Common topologies include bus, star, and ring. The bus connects all devices to a single cable. Star connects devices to a central hub/switch. Ring forms a closed cable loop between all devices.

Uploaded by

Qurat ul Ain
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
13 views

Week 05 - Topology

1. The document discusses network architecture and topologies. It defines network architecture as the design of computers and devices in a network. 2. There are two main network architectures - client/server and peer-to-peer. Client/server has servers providing services to client computers. Peer-to-peer connects computers as equals to share resources. 3. Network topologies refer to the layout of connected devices. Common topologies include bus, star, and ring. The bus connects all devices to a single cable. Star connects devices to a central hub/switch. Ring forms a closed cable loop between all devices.

Uploaded by

Qurat ul Ain
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 9

Introduction to Information

Technology
IT----
Lecture 5: network architecture &
network Topologies
MS. MARIA ASGHAR
University of Education (Vehari)
Fall 2023
Information Technology?

Information technology (IT) is the use of any computers, storage,


networking and other physical devices, infrastructure and
processes to create, process, store, secure and exchange all
forms of electronic data.
Network Architecture
• The design of computers, devices, and media in a network,
sometimes called
the network architecture.
• Two category
• client/server or peer-to-peer
Client/Server
On a client/server network, one or more
computers act as a server, and the other
computers on the network request services
from the server (Figure). A server, sometimes
called a host computer.
Peer-to-Peer One type of peer-to-peer network
is a simple, inexpensive network that typically connects fewer than 10
computers. Each computer, called a peer, has equal responsibilities
and capabilities, sharing hardware (such as a printer), data, or
information with other computers on the peer-to-peer network
Network Topologies
• A network topology refers to the layout of the computers and devices
in a communications network.
• Three commonly used network topologies are star, bus, and ring.
• Most networks, including the Internet, use combinations of these
topologies.
Bus Network A bus network consists of a single central cable, to which
all computers and other devices connect.
• The bus is the physical cable that connects the computers and other
devices.
• The bus in a bus network transmits data in both directions.
• When a sending device transmits data, the address of the receiving
device is included with the transmission.
• Bus networks are popular on LANs because they are inexpensive and
easy to
Network Topologies
Advantage
• Attached and detached at any point on the bus without disturbing the rest
of the network.
• failure of one device usually does not affect the rest of the bus network.
Disadvantage
• bus itself might become inoperable, network remains inoperative until the
bus is back in working order.
Star Network On a star network, all of the computers and devices
(nodes) on the network connect to a central device.
• Two types of devices that provide a common central connection point for
nodes on the network are a hub and a switch.
• All data that transfers from one node to another passes through the hub or
switch.
Advantages
• easy to install and maintain.
• Nodes can be added to and removed from the network with no disruption
to the network.
Network Topologies
Advantage
• if one node fails, only that node is affected. The other nodes continue
to operate normally.
Disadvantage
• If the hub or switch fails, however, the entire network is inoperable
until the device is repaired.
Most large star networks, therefore, keep backup hubs or switches
available in case the primary one fails.
Network Topologies
• Ring Network On a ring network, a cable forms a closed loop (ring)
with all computers and devices arranged along the ring.
• Data transmitted on a ring network travels from device to device
around the entire ring, in one direction.
• When a computer or device sends data, the data travels to each
computer on the ring until it reaches its destination.
Disadvantage
• If a computer or device on a ring network fails, the entire network
potentially could stop functioning.
• A ring network can span a larger distance than a bus network, but it is
more difficult to install.
• The ring topology primarily is used for LANs, but also is used in WANs.
Network Topologies

You might also like