Scribd
Upload
856 views

Cisco Business 150AX Access Point Quick Start Guide

This quick start guide provides instructions for setting up the Cisco Business 150AX Access Point. It can be used to create a new Wi-Fi 6 wireless network or expand an existing one. To set up, connect the access point to a PoE switch or router using the included Ethernet cable. Download the Cisco Business Mobile app or use the web UI to configure the access point. The guide also explains how to mount the access point and find additional support documentation.

Uploaded by

Dmitry
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
856 views

Cisco Business 150AX Access Point Quick Start Guide

This quick start guide provides instructions for setting up the Cisco Business 150AX Access Point. It can be used to create a new Wi-Fi 6 wireless network or expand an existing one. To set up, connect the access point to a PoE switch or router using the included Ethernet cable. Download the Cisco Business Mobile app or use the web UI to configure the access point. The guide also explains how to mount the access point and find additional support documentation.

Uploaded by

Dmitry
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Q U I C K STA RT G U I D E

Cisco Business 150AX Access Point


Thank you for choosing the Cisco Business 150AX Access Point.
This access point can be used to create a new Wi-Fi 6 wireless network, or expand coverage of your existing Cisco Business Wireless (CBW) Wi-Fi 6 Network.
This Quick Start Guide will get you up and running in no time.

3
2 4

What’s in the Box 5


Product Features
● Cisco Business 150AX Access Point 1 Status LED
● Mounting Kit PoE (Power over Ethernet)-In Port
2
● Ethernet Cable (Ethernet Uplink Port)
● Quick Start Guide 6
3 Kensington Lock
● Technical Support Contact List
4 Disabled
● Pointer Card China RoHS
● Compliance Information (for EU SKU only) 7 5 Mode Button

6 Security Screw Hole

7 Mounting Bracket

First, You’ll Need... ● An active Internet connection. ● A PoE (Power over Ethernet) switch, router, or a PoE injector to supply
power to the access point.
● A mobile device with Wi-Fi capability (not connected to an
active wireless network). ● A router or switch (to act as your DHCP Server).
● Cisco Business Mobile app or a compatible web browser
such as Microsoft Edge (ver. 10 or above), Safari (ver. 7 or
above), Firefox (ver. 33 or above) or Chrome (ver. 38 or above).

Cisco Business 150AX Access Point | Quick Start Guide


Get Connected Get Configured
Download the Cisco Business Mobile app
Connect your access point via ethernet cable (provided) to a PoE LAN port on your switch
1 or router. If you do not have a PoE switch or router you will need to use a PoE injector.
No computer is needed for setup, just use the app on your mobile phone.

GbE
Scan the QR code here to download the app or go to cisco.com/go/cbapp and
follow the installation instructions.

Alternative: Web UI (Internet Browser) Setup


If you do not wish to use the Cisco Business Mobile app you can use the Web UI for setup.
These instructions can be found online in the Web UI Setup Document.

Setting up a new network or adding to an existing network? To download the instructions see the “Get Support” section below.

Set up a new network


If setting up a new network the device will begin initial boot up. The LED will cycle through
patterns of green, red and off. This is normal and can take up to 6 minutes or longer. The
device is not ready until the LED is solid green. Once this occurs you can proceed to “Get
Configured”.
Mounting and Grounding
2 Add to an existing CBW Wi-Fi 6 wireless network
Allow the access point to boot up and automatically update its firmware and configuration Cisco Business Wireless access points can be mounted in several configurations—on a suspended
to match the existing network. This can take 10 minutes or more, and the LED will cycle ceiling, on a hard ceiling or wall, or in the plenum air space above a suspended ceiling.
through green, red and off. This is normal. Once the LED is solid green the setup is Mounting instructions are located in the Administration Guide, see the “Get Support” section
complete and ready to be connected to the network. Once you are connected the LED below.
turns blue.

Get Support

For Cisco support and additional product documentation, including the Web UI
Setup Document and Administration Guide, visit:
https://cisco.com/go/cbw150ax

©2022 Cisco and/or its affiliates. All rights reserved. Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries.

2 To view a list of Cisco trademarks, go to this URL: https:// www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners.
The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R)

Cisco Business 150AX Access Point | Quick Start Guide

You might also like