Scribd
Upload
793 views

Requirements For Discharge Permit Application

The document outlines the requirements for a discharge permit application, including required supporting documents. Applicants must submit an engineer's report signed by a qualified professional containing details about the facility and wastewater treatment process. They must also provide drawings of the plant layout and wastewater treatment facility. Additional required documents include a notarized application, environmental compliance certificate, proof of accreditation, and details on wastewater volume and receiving body.

Uploaded by

Alfa Polig
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
793 views

Requirements For Discharge Permit Application

The document outlines the requirements for a discharge permit application, including required supporting documents. Applicants must submit an engineer's report signed by a qualified professional containing details about the facility and wastewater treatment process. They must also provide drawings of the plant layout and wastewater treatment facility. Additional required documents include a notarized application, environmental compliance certificate, proof of accreditation, and details on wastewater volume and receiving body.

Uploaded by

Alfa Polig
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

REQUIREMENTS FOR DISCHARGE PERMIT APPLICATION

Upload supporting documents by dragging files to this page or by cliking


the Add Files button.

NOTES:

 Maximum filesize is 20MB.


 Split files that are greater than 20MB and upload them separately.
 Accepted filetypes are pdf, jpg, jpeg, png, gif.
 An asterisk (*) indicates that the item is required.
 The Finalize application button will only be enabled once the
required documents are complete.

For Discharge Permit:

1. Engineer's Report with at least containing the following:


o - Signed by PME/ChE/Sanitary Engr./Accredited PCO
o - Name of project or business;
o - Brief description of manufacturing process involved;
o - Production capacity, quality or volume and the generic name
of the products;
o - The nature and character of the applicant's wastewater and
its physical and chemical composition;
o - Total daily volume of discharge of raw wastewater;
o - Treatment process and estimated treatment efficiency; The
expected quality of the effluent and other discharge shall
meet the Effluent standards of the DENR;
o - The total daily volume of water consumption and discharge
of final treated wastewater effluent;
o - The name of receiving body of water and its official water
classification and in case of land discharge, the nearest
receiving body of water and its official water classification;
o - Information on flow measurement equipment and procedure;
o - Pollution prevention/Environmental Management System plan
or program;
o - DENR ID Number as hazardous waste generator (if
applicable); and
o - State the cost incurred in the installation and maintenance
of wastewater treatment facility; if any
2. Drawing requirements in 50cm x 90cm paper signed and sealed by
the PME/ChE/Sanitary Engr.
o - Vicinity Map of the Plant;
o - The wastewater line layout from the wastewater sources to
the WTF; and
o - Plan and elevation drawings of the WTF as built with
complete specifications.

 Official Receipt for Application Fee

 Notarized Application*

 ECC or CNC*
 PCO Accreditation / Appointment letter *

 Other Documents

 Official Receipt for Wastewater Discharge Fee

 Plumbing and Drainage Layout*

 Nature of Project / Business*

 Total Volume of Discharge*

 Receiving Body of Water / Classification*

 Certificate of Interconnection*

You might also like