Scribd
Upload
45 views5 pages

HT Assignment 1-5 Odd 2023-24

This document contains 5 assignments on various topics in heat transfer for a Mechanical Engineering course. Each assignment contains 4 questions related to the topic. Assignment 1 covers radiation heat transfer, Assignment 2 covers heat exchangers, Assignment 3 covers convection heat transfer, Assignment 4 covers conduction heat transfer, and Assignment 5 covers two-phase heat transfer. The questions ask students to derive equations, define terms, explain concepts and phenomena, and perform calculations related to heat transfer.

Uploaded by

Prajapati Dhaval
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
45 views5 pages

HT Assignment 1-5 Odd 2023-24

This document contains 5 assignments on various topics in heat transfer for a Mechanical Engineering course. Each assignment contains 4 questions related to the topic. Assignment 1 covers radiation heat transfer, Assignment 2 covers heat exchangers, Assignment 3 covers convection heat transfer, Assignment 4 covers conduction heat transfer, and Assignment 5 covers two-phase heat transfer. The questions ask students to derive equations, define terms, explain concepts and phenomena, and perform calculations related to heat transfer.

Uploaded by

Prajapati Dhaval
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

GOVERNMENT ENGINEERING COLLEGE BHUJ

MECHANICAL ENGINEERING DEPARTMENT

Course Code: 3151909


Course Name: Heat Transfer

ASSIGNMENT -1 Radiation (CO3)

1 What is shape factor with respect to itself if the surface is concave, convex and flat?

2 Derive an expression for a rate of radiation heat exchange when a radiation shield is inserted
between two large parallel plates
3 State and prove Kirchoff’s law of radiation.

4 Define : absorptivity, reflectivity, transitivity of radiation .

1
GOVERNMENT ENGINEERING COLLEGE BHUJ

MECHANICAL ENGINEERING DEPARTMENT

Course Code: 3151909


Course Name: Heat Transfer

ASSIGNMENT -2 Heat Exchanger (CO4)

1 Dry saturated steam at 10 bar enters a counter-flow heat exchanger at the rate of 15 kg/s and
leaves at 300°C. The entry of gas at 600°C is with mass flow rate of 25 kg/s. If the condenser
tubes are 30 mm diameter and 3 m long, make calculations for the heating surface area and the
number of tubes required. Neglect the resistance offered by the metallic tubes.

Take the following properties for steam and gas:

2 Define fouling factor? Explain its effect on the performance of a heat exchanger?

3 Derive equation of logarithmic mean temperature difference for Counter flow heat exchanger.

4 Define effectiveness of heat exchanger. Derive equation for effectiveness of a Parallel flow heat
exchanger.

2
GOVERNMENT ENGINEERING COLLEGE BHUJ

MECHANICAL ENGINEERING DEPARTMENT

Course Code: 3151909


Course Name: Heat Transfer

ASSIGNMENT -3 Convection (CO2)

1 Explain the mechanism of convection heat transfer. Also explain natural and forced convection.

2 Using Buckingham – π theorem show that Nu = f (Re, Pr)

3 Differentiate mean film temperature and bulk mean temperature

4 Show physical significance of Following non-dimensional numbers:


a) Nu (Nusselt Number),
b) Gr (Grashof Number)
c) Re (Reynolds number)
d) Pr (Prandtl Number)

3
GOVERNMENT ENGINEERING COLLEGE BHUJ

MECHANICAL ENGINEERING DEPARTMENT

Course Code: 3151909


Course Name: Heat Transfer

ASSIGNMENT - 4 Conduction (CO1)

1 With neat sketch explain the heat conduction through a plan wall with and without heat
generation.

2 Write the general three-dimensional heat conduction equation in i) Cylindrical coordinates ii)
Spherical coordinates
3 What is meant by thermal resistance? Explain the electrical analogy for solving heat transfer
problems.
4 Derive general heat conduction equation in cylindrical coordinates.

4
GOVERNMENT ENGINEERING COLLEGE BHUJ

MECHANICAL ENGINEERING DEPARTMENT

Course Code: 3151909


Course Name: Heat Transfer

ASSIGNMENT - 5 Two-phase heat transfer (CO5)

1 Discuss various regimes of pool boiling with neat sketch.

2 Differentiate nucleate and film boiling.

3 Define condensation? Differentiate between film wise and drop wise condensation. Which type
has better heat transfer coefficient? In condenser design which of condensation is usually
selected?

You might also like