International Journal of Pure and Applied Mathematics

Volume 114 No. 8 2017, 35-43

ISSN: 1311-8080 (printed version); ISSN: 1314-3395 (on-line version)
url: http://www.ijpam.eu
Special Issue
ijpam.eu

Application of Genetic Algorithm in

Electrical Engineering
Kishore Kumar Pedapenki1 and Gurrala Swathi2
1
Vignan’s Institute of Information Technology,
Visakhapatnam, Andhra Pradesh, India - 530049.
Email : [email protected]
2
Vignan’s Institute of Information Technology,
Visakhapatnam, Andhra Pradesh, India - 530049.
Email : [email protected]
May 30, 2017

Abstract
In these days, the artificial intelligent techniques play a
vital role in controlling of the system. Out of them, Ge-
netic Algorithm (GA) is the better tool to use to control
the complex process or to solve the complex problems. The
GA is used to find the global optimum solution and it is
the technique of natural selection to find the optimum so-
lution. Electrical Engineering is the one of the branches
of Engineering where the system is gigantic and complex.
In Electrical Engineering, the application of GA made the
system easy to control in various aspects. In this paper,
the application of GA in Economic Load Dispatch, Reac-
tive Power Control and Power Flow are discussed.
Keywords : Electrical Engineering, Artificial Intelligence,
Genetic Algorithm, Power Flow.

1 Introduction
The Genetic Algorithm is the very useful tool to get the optimum
solution for many complex problems. The Electrical Engineering

35
International Journal of Pure and Applied Mathematics Special Issue

has a gigantic and very complex system. The main parts of Electri-
cal Engineering are generation, transmission and distribution. All
these places, there are so many problems. The clear monitoring
system is established to handle all these problems. GA is the one
of the highly implemented artificial intelligent tool to control these
types of complex problems.
The organization of the paper is as follows:
2. GA basics
3. Economic Load Dispatch [1-6]
4. Reactive Power Control [7-16]
5. Power Flow Studies [17-20]

2 Genetic Algorithm
Genetic Algorithm is the method to select the naturally and it
creates a population of chromosomes to determine the fitness and
select next generation to perform reproduction using crossover and
later perform the mutation to find the best values. Genetic Algo-
rithm is a meta heuristic search technique and it is a direct random
search method that relies on to the mechanism of natural selection.
GA is very different from the most of the traditional optimization
methods. It is also used to find the optimum solutions of contin-
uous and differential functions, these methods are analytical and
make use of the technical calculation.
Selection:
Selection rule randomly select the parents for next generation. Cross
over:
Cross over rules creates a next generation with children by combin-
ing two parents.
Mutation:
Mutation rules applies a random changes to individual parents for
forming children.

36
International Journal of Pure and Applied Mathematics Special Issue

Figure 1: Flow chart of GA

3 Economic Load Dispatch

To fulfill the load demand, the real and reactive power vary within
the limits with less fuel cost to meet the requirement of energy
the electric power system size should be increased rapidly. The
GA is used to find the ramp rate for generating units the genetic
algorithm simulated annealing is tested for 10 generating system,
and GA is based on the MOL solutions and MOL methods for get-
ting quality of GA-SA against it is compared with the 20 and 40
generating unit system [1]. The GA proposed the parallel micro
grid generating algorithm (PMGA) is used for parallel machines,
and the constrained economic dispatch problems are solved by GA
for generating units in increasing incremental functions .The GA is

37
International Journal of Pure and Applied Mathematics Special Issue

tested on the systems for connecting PMGA parallel to machines

there have a some problems for clearing that problems the GA is
used as a PMGA[2]. The Bid-Based dynamic economic dispatch
is solved by the Niche immune GA for various load demands the
generation of cost is maximized but Bid-Based dynamic economic
dispatch is used to maximize social profit under various environ-
ment and market in electricity, and proposed Niche immune GA is
the effective solution[3]. The GA is used as a simple and RGA (Re-
fined Genetic Algorithm) due to operational constraints these two
methods are used to find the minimization cost for economic load
dispatch so in this paper it improves the GA performance [4]. With
the use of MATLAB, IEEE 14 Bus and IEEE 30 Bus are used to
test the transmission lines and the work is modeling the economic
load dispatch for solving the problems. Two concepts are used in
[5], those are genetic algorithm and quadratic programming. Now
a days, economic load dispatch is a emerging problem with the ex-
istence of thermal power plant which is a renewable energy source
and find difficult to optimize the solution, so to reduce the fuel cost
genetic algorithm is used and it gives the optimal solution and con-
sidering problem is economic load dispatch and constraint is wind
power the GA is based on the problem only [6].

4 Reactive Power Control

Reactive power control is the major issue in smooth flow of the elec-
trical power both at distribution side and transmission side. Many
artificial intelligent techniques were used in controlling the reac-
tive power viz. 1. Fuzzy Logic Controller [8-9] 2. Neural Network
Controller [11-12] 3. Neurao Fuzzy Controller [14-15]
Reactive power flow problem in power system at distribution
side and transmission side, to control the reactive power different
types of controllers are used ,here the GA is used to control the
reactive power flow control. GA is mainly used to optimize the non
linear equations, the problem is reactive power dispatch and voltage
control in the power system and here the GA is applied to the
VAR, the initial population is generated through pseudo random
generator [7]. GA is used for optimizing the problem using 6 bus,

38
International Journal of Pure and Applied Mathematics Special Issue

and the real power and reactive power flow has been studied with
the usage of GA the optimization process is done with the reactive
power then the bus voltage magnitude is limited [10]. The GA
is used to optimize the reactive power and controlling the voltage
because the non linear load create a harmonics and reactive power,
with the optimization technique it can be reduced the GA can be
named as a IDGA (Improved Dynamic Genetic Algorithm)[13], [16].

5 Power Flow Studies

The power flow is considered as to minimize the objective func-
tion which represent the generation cost/transmission loss. This is
frequently solve by using optimization technique. GA is the best
method to solve the optimization technique when compared with
the conventional method. The conventional methods are used to
find the local minima or local maxima but the GA is used to find
the global maxima or global minima so the GA is also applied at
the power systems to find the problems at transmission lines and to
optimize it [17]. To reduce the real and reactive power by GA along
with FACTS controllers, in this paper newton raphson method is
used to among the FACTS controller static VAR is consider in this
work [18]. In electrical power systems had damping oscillations and
the load is increasing with the growth of generations, the objective
of this paper [19] is at high voltage power is static stability and
electrical network, this paper shows a new approach to find the op-
timal tuning of power system with the use of GA and getting the
Eigen values that should be verified at the infinite bus. Distribu-
tive Power Flow Controller (DPFC) improving the power systems
with GA and DPFC contains three controllers are central, series
and shunt control. The shunt and series are in STATCOM and
central control consists a one shunt power converter and five series
converter [20].

6 Conclusion
The Genetic Algorithm is one of the best artificial intelligent tech-
niques to get the optimum values of many complex problems. In
this paper, the application of GA in very gigantic system like Elec-

39
International Journal of Pure and Applied Mathematics Special Issue

trical Engineering is considered. The main problems of Electri-

cal Engineering are Economic load dispatch, reactive power control
and power flow studies are considered in this paper. The various
research papers in these areas were referred and discussed in this
paper.

References
[1] W. Ongsakul; N. Ruangpayoongsak, ”Constrained dynamic
economic dispatch by simulated annealing/genetic algo-
rithms”, IEEE Power Engineering Society. International Con-
ference on Power Industry Computer Applications , pp. 207 -
212, 2001.

[2] J. Tippayachai, W. Ongsakul, I. Ngamroo, ”Parallel micro

genetic algorithm for constrained economic dispatch”, IEEE
Transactions on Power Systems, Vol. 17, Issue. 3, pp. 790 -
797, 2002.

[3] Gwo-Ching Liao, Jia-Chu Lee, ”Application novel Immune

Genetic Algorithm for solving Bid-Based Dynamic Economic
power load dispatch”, International Conference on Power Sys-
tem Technology, pp. 1-7, 2010.

[4] Lily Chopra and Raghuwinder Kaur, Sant Baba Bhag

Singh, ”Economic Load Dispatch Using Simple and Re-
fined Genetic Algorithm, International Journal of Advances in
Engineering and Technology, Vol. 5, Issue 1, pp. 584-590, 2012.

[5] Bishnu Sahu , Avipsa Lall , Soumya Das and T. Manoj Patra,
”Economic Load Dispatch in Power System using Genetic Al-
gorithm, International Journal of Computer Applications, Vol.
67, No.7, 2013.

[6] Fahad Khan Khosa; Muhammad Fahad Zia; Abdul Aziz

Bhatti, ”Genetic algorithm based optimization of eco-
nomic load dispatch constrained by stochastic wind power”,
(ICOSST), pp. 36-40, 2015.

40
International Journal of Pure and Applied Mathematics Special Issue

[7] Robert Lukomski, ”Using Genetic Algorithm for Optimal Dis-

patching of Reactive Power in Power Systems”, 2004.

[8] Kishore Kumar Pedapenki, S. P. Gupta, Mukesh Kumar

Pathak, ”Comparison of PI and Fuzzy Logic Controller for
Shunt Active Power Filter, IEEE - International Conference
on Industrial and Information Systems (ICIIS), Sri Lanka, pp.
42-47, 18 th - 20 th Aug,2013.

[9] Kishore Kumar Pedapenki, S. P. Gupta, Mukesh Kumar

Pathak, ”Two Controllers for Shunt Active Power Filter based
on Fuzzy Logic, IEEE - International Conference on Re-
search in Computational Intelligence and Communication Net-
works (ICRCICN),RCC Institute of Information Technology,
Kolkata, West Bengal, India, pp.141-144, 18 th -20 th Nov,
2015.

[10] Julius Abayateye and Arun Sekar, ”Determination of Optimal

Reactive Power Generation Schedule Using Line Voltage Drop
Equations and Genetic Algorithm”, 41st Southeastern Sympo-
sium on System Theory, pp. 139 - 143, 2009.

[11] Kishore Kumar Pedapenki, S. P. Gupta, Mukesh Kumar

Pathak, ”Application of Neural Networks in Power Quality,
IEEE - International Conference on Soft Computing Tech-
niques and Implementations (ICSCTI), Manav Rachna Inter-
national University, Faridabad, Haryana, India, 8 th -10 th
October,pp. 116-119, 2015.

[12] Kishore Kumar Pedapenki, S. P. Gupta, Mukesh Kumar

Pathak, ”Comparison of PI and Neural Network based Con-
trollers for Shunt Active Power Filter, IEEE - International
Conference on Control, Instrumentation, Communication and
Computational Technologies (ICCICCT), Noorul Islam Uni-
versity, Nagercoil, Tamil Nadu, India, pp. 214-218, 28 th -29
th Dec, 2015.

[13] S. C. Liu, J. H. Zhang, Z. Q. Liu, H. Q. Wang, ”Reactive Power

Optimization and Voltage Control Using an Improved Genetic
Algorithm”,International Conference on Power System Tech-
nology, pp.1-5, 2010.

41
International Journal of Pure and Applied Mathematics Special Issue

[14] Kishore Kumar Pedapenki, S. P. Gupta, Mukesh Kumar

Pathak, ”Neuro Fuzzy based controller for Power Quality Im-
provement, IEEE - International Conference on Computa-
tional Intelligence and Communication Networks (CICN), MIR
Labs, Gyan Ganga Institute of Technology and Sciences Chap-
ter, Jabalpur, Madhya Pradesh, India, 12 th -14 th Dec, 1294-
1298, 2015.
[15] Kishore Kumar Pedapenki, S. P. Gupta, Mukesh Kumar
Pathak, ”Comparison of Shunt Active Power Filters with
Fuzzy and Neuro Fuzzy controllers, IEEE -International Con-
ference on Computational Intelligence and Communication
Networks (CICN), MIR Labs, Gyan Ganga Institute of Tech-
nology and Sciences Chapter, Jabalpur, Madhya Pradesh, In-
dia, 12 th -14 th Dec, pp. 1247-1250, 2015.
[16] Abdullah WN, Saibon H, Zain AA, Lo KL, ”Genetic algo-
rithm for optimal reactive power dispatch”, IEEE - Interna-
tional Conference on Energy Management and Power Delivery,
EMPD’98, Vol. 1, pp. 160-164, 1998
[17] Florin Solomonese, Constantin Barbulescu, Stefan Kilyeni,
Marcela Litcanu, ”Genetic algorithms.Power systems applica-
tions”, 2013 6th International Conference on Human System
Interactions(HSI), pp. 407 - 414, 2013.
[18] Mugdha Bhandari, Sri. G. N. Madhu, ”Genetic Algorithm
Based Optimal Allocation Of SVC For Reactive Power Loss
Minimization In Power Systems ”, International Conference
on Industrial Instrumentation and Control (ICIC), PP. 1651
1656, 2015.
[19] Mariam Jebali, Omar Kahouli, Hsan Hadj Abdallah, ”Power
system stabilizer parameters optimization using genetic algo-
rithm”, 2016 5th International Conference on Systems and
Control (ICSC), pp. 78 - 83, 2016.
[20] Nivedita bajpayi, Shivendra singh, Thakur, ”Analysis of a ge-
netic algorithm (GA) Based Distributive Power flow Controller
(DPFC) for Power System Stability”, International Research
Journal of Engineering and Technology (IRJET) , Vol. 03, Is-
sue. 08, 2016.

42
43
44