Datasheet Eaton 93PM UPS

Eaton 93PM UPS lity

E f fi
ci
100-500 kVA bi

la

en
Sc a

cy
LOWER
TCO
HIGHER
AVAILABILITY

Re
y

sil
et
en

i
f
Sa cy

Highest availability,
at the lowest total cost of ownership
Lowest total cost of ownership (TCO)
• The 93PM UPS sets new standards, with an operating level of
up to 96,7% in double conversion mode resulting in significant
savings in operational costs.
• > 99% superior efficiency is delivered in
Energy Saver System mode (ESS).
• High efficiency even when UPS load levels are low, optimized
by Variable Module Management System (VMMS).
• Maximal power and energy density ensures a compact footprint.

Ultimate resiliency
Key applications • HotSync® patented load-sharing technology enables parallel
• Medium and large data centers operating of static converters without communication or
loadshare signals. Eliminating the communication link eliminates
• Finance and banking critical infrastructure risk of single point of failure.
• Commercial buildings and industrial complexes • One static switch per UPS enables the full bypass capacity to
be achieved from day one. Power modules can be added as
• Healthcare loads increase.
• Telecommunications installations • Equipped with an ultra-rapid fuse in the Static Switch
• Process control equipment – ensuring safety in all scenarios.
• Equipped with a backfeed contactor
– no need for additional installments
• Wide power factor range meets rapidly changing
load power factor without de-rating.
• Intelligent battery charging through Advanced Battery
Management prevents unnecessary charging and
significantly retards battery wear rate.

Higly scalable and easy deployment

• Scalable, modular architecture and ‘Pay
as you grow’ capability minimises CapEx.
• Thermal management support allows for flexible installation
against the wall, in rows and in hot/cold aisle configurations.
• Easy access allows fast MTTR (mean time to repair).

Easy management
• Wide range of connectivity options
(Web/SNMP, Modbus/Jbus, relay contacts)
• Intelligent Power® software integrates with leading virtualisation
management systems for monitoring and managing.
• The intuitive touchscreen LCD user interface and visual data
logging provides clear information on the UPS status.
Eaton 93PM UPS 100-500 kVA
Technical specifications
General 100-400 kW 100-500 kVA
Output
(p.f. 1.0) (p.f. 0.90 or 0.95)
UPS output power rating 100-400 kW range (p.f. 1.0),
Output wiring 3ph + N + PE
100-500 kVA range (p.f. 0.90 / 0.95)
Nominal voltage rating (configurable) 220/380, 230/400, 240/415 V 50/60 Hz
Efficiency in double conversion mode Up to 96,7%
Output UTHD < 1,5% (100% linear load).
Efficiency in Energy Saver System (ESS)1 > 99% < 3% (reference non-linear load)
Inverter/rectifier topology Transformer-free IGBT with PWM Permitted load power factor 0.8 lagging – 0.8 leading
Paralleling capability Up to 4 units Overload on inverter 10 min 102–110%; 60 sec 101% - 105%;
Audible noise Default < 69 dBA 60 sec 111–125%; 10 sec 106% - 125%;
With top air exhaust kit < 74 dBA 10 sec 126–150%; 300 ms >125%
300 ms >150%.
UPS topology Double conversion
Overload when bypass available Continuous < 115%, 10 ms 1000%
UPS dimensions (width x depth, height) 1618 mm x 920 mm x 1968 mm
 ote: Bypass fuses may limit the overload capability!
N
UPS Degree of protection IP 20
Accessories
Altitude (max) 1000 m without derating (max 2000 m)
External battery cabinets with long-life batteries, Top air exhaust kit (front to top airflow),
Input MiniSlot connectivity (Network/SNMP, ModBus/Jbus, Relay)
Input wiring 3ph + N + PE Communications
Nominal voltage rating (configurable) 220/380, 230/400, 240/415 V MiniSlot 3 communication bays
Rated input frequency 50 or 60 Hz, user configurable Serial ports Built-in host and device USB
Frequency tolerance 40 to 72 Hz Relay inputs/outputs 5 relay inputs and dedicated EPO
Input Power Factor 0.99 1 relay output
Input ITHD < 3% Software Eaton Intelligent Power Manager
Eaton Intelligent Power Protector
Soft start capability Yes
Internal backfeed protection Yes Compliance with standarts
Safety (CB certified) IEC 62040-1
Battery
EMC IEC 62040-2
Battery type VRLA
Performance IEC 62040-3
Charging method ABM technology or Float
RoHS EU directive 2011/65/EU
Temperature compensation Optional
WEEE EU directive 2012/19/EU
Battery nominal voltage (VRLA) 432 V (36 x 12 V, 216 cells) or 480 V
(40 x 12 V, 240 cells) for 100-400 kW range Due to continuous product imrovement programmes, specifications are subject to change without notice.
480 V (40 x 12 V, 240 cells) for 100-500 kVA range
Note: Strings with different battery
voltage may not be paralleled!

Battery start capability Yes

1. Additional information on ESS performance, refer to 93PM UPS Technical Specification.

Eaton 93PM 100-400 kW range

Description Rating Power factor Dimension (WxDxH) Weight
93PM-100(400) 100 kVA 1.0 1618 mm x 920 mm x 1968 mm 680
93PM-150(400) 150 kVA 1.0 1618 mm x 920 mm x 1968 mm 745
93PM-200(400) 200 kVA 1.0 1618 mm x 920 mm x 1968 mm 810
93PM-250(400) 250 kVA 1.0 1618 mm x 920 mm x 1968 mm 875
93PM-300(400) 300 kVA 1.0 1618 mm x 920 mm x 1968 mm 940
93PM-350(400) 350 kVA 1.0 1618 mm x 920 mm x 1968 mm 1005
93PM-400(400) 400 kVA 1.0 1618 mm x 920 mm x 1968 mm 1070

Eaton 93PM 100-500 kVA range

Description Rating Power factor Dimension (WxDxH) Weight
93PM-100(500) 100 kVA 0.95 1618 mm x 920 mm x 1968 mm 680
93PM-150(500) 150 kVA 0.95 1618 mm x 920 mm x 1968 mm 745
93PM-200(500) 200 kVA 0.95 1618 mm x 920 mm x 1968 mm 810
93PM-250(500) 250 kVA 0.9 1618 mm x 920 mm x 1968 mm 810
93PM-300(500) 300 kVA 0.9 1618 mm x 920 mm x 1968 mm 875
93PM-350(500) 350 kVA 0.95 1618 mm x 920 mm x 1968 mm 940
93PM-400(500) 400 kVA 0.95 1618 mm x 920 mm x 1968 mm 1005
93PM-450(500) 450 kVA 0.95 1618 mm x 920 mm x 1968 mm 1070
93PM-500(500) 500 kVA 0.9 1618 mm x 920 mm x 1968 mm 1070

Eaton is a registered
© 2017 Eaton trademark of Eaton.
All Rights Reserved
Publication No. PS153023EN / CSSC-432 All other trademarks are property
June 2017 www.eaton.eu/93PM of their respective owners.