भारत सरकार

GOVERNMENT OF INDIA

रे ल मं त्रालय
MINISTRY OF RAILWAYS

भारतीय रे ल एकीकृ त मानक दर

अनु सू ची
(फॉमे श न कायय , पू ल कायय एवं पी वे कायय )

Indian Railways
Unified Standard Schedule of Rates
(Formation Works, Bridge Works and P. Way Works)

इं जीननयररं ग नवभाग
Engineering Department

Basic Rate Sheet

2021

Note: The figures given in Amount/Rate Column (Which are strikethrough) are not to be taken
for estimation or justifying rate. This amount/rate has been given for illustration purpose only.
IR Unified Standard Schedule of Rates - 2021 Basic Rate Sheet

Indian Railways Unified Standard Schedule Of Rates (Formation Works, Bridge Works and P.Way Works)

"Basic Input Data Sheet"

for Rates Of Basic Items Used For 'Analysis of Rates'

(Rates of the Basic Elements are without GST)

1. Rates of Basic Element shall necessarily be without GST as provision of the GST has been made in the Analysis of Rates of Items. Accordingly, it must be ensured that Rates of basic
elements to be entered in this "Basic Input Data Sheet" while updation of USSOR are exclusive of GST. Similarly hire - charges of plant & machinery shall also be exclusive of GST.
However hire Charges shall be inclusive of cost of services of operating staff, Cost of lubricating oil, fuel and other consumables for running the plant and machinery unless othewise
specified in the Description of the Basic Element.
2. For hire charges of plant machinery, per day means single shift of eight working hours.
SL Description Unit Rate Code Rate (₹)
Labour:
1 Draftsman / Surveyor Day 0001 1,500.00
2 Mate (Skilled) Day 0002 617.00
3 Mate (Semi skilled) Day 0003 512.00
4 Mason 1st class (Skilled) Day 0004 617.00
5 Mason 2nd class (Semi-skilled) Day 0005 512.00
6 Carpenter (Skilled) Day 0006 617.00
7 Carpenter (Semi skilled) Day 0007 512.00
8 Blacksmith - 1st Class (Skilled) Day 0008 617.00
9 Blacksmith - 2nd Class (Semi-skilled) Day 0009 512.00
10 Fitter Grade - 1 (Skilled) Day 0010 617.00
11 Fitter Grade - 2 (Semi-skilled) Day 0011 512.00
12 Painter (Skilled) Day 0012 617.00
13 Electrician (Skilled) Day 0013 617.00
14 Rock Excavator (Semi skilled) Day 0014 512.00
15 Rock Breaker (Semi skilled) Day 0015 512.00
16 Rock Hole Driller (Semi skilled) Day 0016 512.00
17 Stone Chiseller (Semi skilled) Day 0017 512.00
18 Highly Skilled labour Day 0018 724.00
19 Labour Skilled (Machine Operator/Welder/Machinist/Driver etc.) Day 0019 617.00
20 Labour Unskilled Day 0020 437.00
21 Helper (Semi-skilled) Day 0021 512.00
22 Bandhani (Semi skilled) Day 0022 512.00
23 Bhisti (Semi skilled) Day 0023 512.00
24 Beldar (Semi Skilled) Day 0024 512.00
25 Beldar (Un skilled) Day 0025 437.00
26 Coolie (Un skilled) Day 0026 437.00
27 Mistry (Semi skilled) Day 0027 512.00
28 Grinderman (Skilled) Day 0028 617.00
29 Welder (Skilled) Day 0029 617.00
30 Chipper (Skilled) Day 0030 617.00
31 Luter (Skilled) Day 0031 617.00
32 Hammer man (Semi-skilled) Day 0032 512.00
33 Look Out Man (Un-skilled) Day 0033 437.00
34 Waterman (Un-skilled) Day 0034 437.00
35 Patrolman (Semi-skilled) Day 0035 512.00
36 Head Trolley man (Skilled) Day 0036 617.00
37 Trolly man (Semi-skilled) Day 0037 512.00
38 Caution man (Semi-skilled) Day 0038 512.00
39 Chowkidar (Semi skilled) Day 0039 512.00
40 Machinist (operator) (Skilled) Day 0040 617.00
41 Machine Operator (Machine) (Skilled) Day 0041 617.00
42 Track Machine Maintainer (Semi skilled) Day 0042 512.00
43 USFD Operator (With approved Certificate) Day 0043 1,500.00
Machinery, Hire Charges and Materials :
44 On Road Price of Crawler mounted 3D Hydraulic Excavator 148 HP (1.0 Cum Bucket Capacity) - BE220 Each 0044 6,600,000.00

45 On Road Price of Crawler mounted Hydraulic Excavator 260 HP (2.5 cum bucket) Komatsu PC300LC Each 0045 11,500,000.00
46 On Road Price of Wheel loader 3.1 Cum bucket capacity 165 HP - JCB 455ZX Each 0046 7,000,000.00
47 On Road Price of Motor grader 158 HP (3.67 metre blade) BG605I Each 0047 9,700,000.00
48 On Road Price of Dozer 180 HP capacity BEML BD65-1 Each 0048 12,800,000.00
49 On Road Price of JCB 3DX Plus Backhoe Loader 74 HP Each 0049 2,400,000.00

Note: The figures given in Amount/Rate Column (Which are strikethrough) are not to be taken for estimation or justifying rate. This amount/rate has been given for
illustration purpose only.
1
IR Unified Standard Schedule of Rates - 2021 Basic Rate Sheet

(Rates of the Basic Elements are without GST)

1. Rates of Basic Element shall necessarily be without GST as provision of the GST has been made in the Analysis of Rates of Items. Accordingly, it must be ensured that Rates of basic
elements to be entered in this "Basic Input Data Sheet" while updation of USSOR are exclusive of GST. Similarly hire - charges of plant & machinery shall also be exclusive of GST.
However hire Charges shall be inclusive of cost of services of operating staff, Cost of lubricating oil, fuel and other consumables for running the plant and machinery unless othewise
specified in the Description of the Basic Element.
2. For hire charges of plant machinery, per day means single shift of eight working hours.
SL Description Unit Rate Code Rate (₹)
50 On Road Price of Truck with long trailers Payload 20T (without POL) 0050 4,500,000.00
51 On Road Price of Tipper 12 Cum Capacity Tata Signa 1923.K Each 0051 3,100,000.00
52 On Road Price of Truck - 9 tonne Each 0052 1,500,000.00
53 On Road Price of 1.5 tonne Pickup Truck Each 0053 800,000.00
54 Hire charges of Vibratory Hammer attachment of Hydraulic Excavator for driving Sheet pile driving Day 0054 700.00
55 Hire charges of Water tanker 5 to 6 KL capacity Hour 0055 150.00
56 Hire Charges of Vibratory roller 8 to 10 tonne Hour 0056 1,000.00
57 Hire charges of Road Roller 8 to10 tonnes Hour 0057 500.00
58 Hire Charges of Slope Vibrator to be attached to Hydralic Excavator for rolling of slope surfaces of embankment. Day 0058 2,000.00

59 Hire Charges of Wet Mix Plant 60 TPH Capacity Hour 0059 950.00
60 Hire charges of Derrick Monkey Rope Day 0060 750.00
61 Hire and running charges of Tripod and Mechanical Winch machine complete with power unit and accessories Day 0061 3,000.00
etc. and shifting at site including maintenance and cost of fuel / lubricants & operators for running

62 Hire and running charges of Hydraulic Piling Rig with power unit etc. including complete accessories and shifting Day 0062 35,000.00
at site
63 Hire and running charges of Bentonite pump Day 0063 3,000.00
64 Hire charges of air compressor 250 cfm capacity with two leads for pneumatic cutters / hammers Day 0064 1,600.00
65 Hire Charges of Air compressor 500 Cfm for fabrication works Day 0065 1,700.00
66 Mobile Concrete Batching/Mixing Plant @ 20 cum/hour Hour 0066 1,400.00
67 Concrete Pump Hour 0067 900.00
68 Hire charges of Transit Mixer 6 cum capacity Hour 0068 2,140.00
69 Hire charges of Concrete Mixer 0.25 to 0.40 cubic metre capacity Day 0069 800.00
70 Hire charges of Generator 2.5 KVA (without POL) Day 0070 300.00
71 Hire charges of Generator 5 KVA (without POL) Day 0071 500.00
72 Hire charges of 7.5 KVA Generator Day 0072 1,000.00
73 Hire charges of 25 KVA Generator Day 0073 1,500.00
74 Hire charges for 3 phase generator (60 KVA) Day 0074 2,000.00
75 Hire Charges of Generator 100 KVA/125 KVA Day 0075 2,500.00
76 Hire charges of Generator of 250 KVA capacity Day 0076 3,000.00
77 Hire charges for Power pack with 200 litres capacity tank with 10 HP 3 phase induction mortar, inlet, out let Day 0077 5,265.00
valves pressure gauges, hose pipes etc for pushing arrangement including consumables, tools, plants,
operator, and transportation to site of work
78 Hire charges of Pin Vibrator Day 0078 350.00
79 Hire charges of surface vibrator Day 0079 300.00
80 Hire charges for tractor with trolley Day 0080 1,200.00
81 Hire charges of tractor with Ripper arrangement Day 0081 1,200.00
82 Hire charges of Power driven hammer drill Day 0082 1,500.00
83 Hire charges of Vibratory Hand Rammers / compactors Day 0083 450.00
84 Hire charges of cement / epoxy slurry injection machine Day 0084 600.00
85 Hire charges of pump set of capacity 4000 litre per hour Day 0085 900.00
86 Hire charges of 10MT crane with Grab Bucket of 0.75 cum capacity and accessories Day 0086 7,000.00
87 Hire and running charges of light crane 5 MT capacity Day 0087 4,000.00
88 Hire charges of Crane 10T capacity Day 0088 5,000.00
89 Hire charges of 12 MT Hydra Day 0089 5,000.00
90 Hire charges of 12 MT crane and accessories Day 0090 6,000.00
91 Hiring charges of Crane 20 MT capacity Day 0091 8,000.00
92 Hiring and running charges of Crane 30 MT capacity including maintenance and cost of fuel / lubricants & Day 0092 16,000.00
operators for running
93 Hiring charges of Crane 50 MT capacity Day 0093 20,000.00
94 Hiring charges of 80MT capacity crane Day 0094 35,000.00
95 Hiring charges of 100 MT capacity crane Day 0095 50,000.00
96 Hiring charges of 150 MT capacity crane Day 0096 100,000.00
97 Hiring charges of 200 MT capacity crane Day 0097 175,000.00
98 Hiring charges of 250 MT capacity crane Day 0098 225,000.00
99 Hiring charges of 300 MT capacity crane Day 0099 250,000.00
100 Hiring charges of 400 MT capacity crane Day 0100 350,000.00

Note: The figures given in Amount/Rate Column (Which are strikethrough) are not to be taken for estimation or justifying rate. This amount/rate has been given for
illustration purpose only.
2
IR Unified Standard Schedule of Rates - 2021 Basic Rate Sheet

(Rates of the Basic Elements are without GST)

1. Rates of Basic Element shall necessarily be without GST as provision of the GST has been made in the Analysis of Rates of Items. Accordingly, it must be ensured that Rates of basic
elements to be entered in this "Basic Input Data Sheet" while updation of USSOR are exclusive of GST. Similarly hire - charges of plant & machinery shall also be exclusive of GST.
However hire Charges shall be inclusive of cost of services of operating staff, Cost of lubricating oil, fuel and other consumables for running the plant and machinery unless othewise
specified in the Description of the Basic Element.
2. For hire charges of plant machinery, per day means single shift of eight working hours.
SL Description Unit Rate Code Rate (₹)
101 Hiring of trailer truck of 20 MT capacity Day 0101 18,000.00
102 Hire charges of Hydraulic jack 8/10 Tonnes capacity Day 0102 300.00
103 Hire charges for jack of 40 MT lifting capacity Day 0103 800.00
104 Hire charges for jack of 100 MT lifting capacity Day 0104 2,000.00
105 Hire charges for 200 MT capacity Jack Day 0105 1,500.00
106 Hire charges of Camber Jacks etc. Day 0106 500.00
107 Hire charges of stressing jack with pump for stressing of HTS cables in PSC girders/slabs. Day 0107 11,500.00
108 Hire charges of grout pump with agitator and accessories Hour 0108 500.00
109 Pulse Echo Test (PET) for integrity testing of piles with contractor’s men, materials and machines. The rate Each 0109 2,000.00
includes cost of Inspection of site, preparation of pile head and any other unforeseen cost required for the test,
submission of reports in triplicate as per satisfaction of the Engineer in Charge at site.
110 Hire Charges of Hydraulic Jack of 50 T capacity for lateral load testing of piles Day 0110 2,000.00
111 Hire Charges of Hydraulic Jack of 100 T capacity for lateral load testing of piles Day 0111 5,000.00
112 Hire charges for OEW flat jack of 100 T capacity for longitudinal slewing of girder from both sides Each 0112 2,500.00
113 Hire Charges of CNC gas cutting Machine Day 0113 4,500.00
114 Hire Charges of CNC drilling machine - 14 to 50mm dia, 100mm thickness, set of spindle - 2 sets, accuracy +/- Day 0114 14,000.00
0.03mm.
115 Hire Charges of MMAW machine ( Manual Metal Arc Welding Machine) - 80 to 500 Amperes. Day 0115 25.00
116 Hire Charges of SAW machine - Tornado Make, current range - 150 to 1250 Amperes. Day 0116 7,500.00
117 Hire Charges of Angle grinder - 230mm dia. Disc, 6000 rpm, CP make. Day 0117 11.00
118 Hire Charges of Impact wrench - 32mm dia.Boit, CP Make. Day 0118 25.00
119 Hire Charges of Torque wrench - 150 kgf-m, Mekaster Make. Day 0119 10.00
120 Hire Charges of Power hack saw machine (Angle) Day 0120 25.00
121 Hire Charges of CNC end milling machine - (Horizonral Spindle), (1). Longitudinal Traverse of table (X-Axis) - Day 0121 17,000.00
1500mm (2). Vertical Axis (Y-Axis) - 1000mm, (3).RAM Column Traverses (Z-Axis) - 500mm.
122 Hire Charges of EOT, 10 ton Capacity, Reva Make Day 0122 1,500.00
123 Hire charges of Road Cum Rail vehicle for transporting Flash Butt Welding plant Day 0123 1,000.00
124 Hire Charges for Mobile Flash Butt Welding Plant Day 0124 55,000.00
125 Hire charges of USFD testing machine(B-Scan) Day 0125 2,500.00
126 Hire charges of USFD testing machine Day 0126 800.00
127 Hire changes for sand receiver and sand blasting pipes with gun and all accessories complete Day 0127 500.00
128 Hire charges for metalising gun with all accessories Day 0128 600.00
129 Hire charges of Arc Welding Machine 500 Amp Day 0129 300.00
130 Hire charges of gas cutter Day 0130 100.00
131 Hire charges of translamatic robotic welding machine Day 0131 5,000.00
132 Hire charges of Hot Paint machine Day 0132 150.00
133 Hire charges of off -Track Tamper (Set of 4) Day 0133 300.00
134 Hire charges of Rail Drill Machine Day 0134 300.00
135 Hire charges for pillar drilling machine Day 0135 1,000.00
136 Hire charges of Electrically operated Rail Drilling Machine Day 0136 200.00
137 Hire charges of Concrete Sleeper Drilling Machine Day 0137 300.00
138 Hire charges of Electrically operated Rail Cutting Machine Day 0138 100.00
139 Hire charges of Rail Cutting Machine Day 0139 300.00
140 Hire charges of Abrasive Rail Cutter (without POL) Day 0140 300.00
141 Hire charges of Hydraulic Rail bender (Jim Crow) Day 0141 200.00
142 Hire charges of Heavy Duty Hydraulic Extractor (10 Tonnes) Day 0142 200.00
143 Hire charges of Hydraulic Rail tensor Day 0143 150.00
144 Hire charges of Hydraulic Sleeper Spacer Day 0144 200.00
145 Hire charges of Hammer Breaker Day 0145 200.00
146 Hire charges of Grinding Machine for 150 mm dia wheel Day 0146 300.00
147 Hire charges of Angle Grinder Day 0147 200.00
148 Hire charges of Rail Profile Weld Grinder Day 0148 100.00
149 Hire charges of Weld Trimmer Machine Day 0149 300.00
150 Hire charges of Mechanical Toe load measuring device Day 0150 200.00
151 Hire charges of Electronic Toe load measuring device Day 0151 200.00
152 Hire charges of Hydraulic bending machine to bend the rails including fuel and operator Day 0152 1,100.00
153 Hire charges of Furnace blower to heat the rails for bending purpose including fuel and operator Day 0153 300.00

Note: The figures given in Amount/Rate Column (Which are strikethrough) are not to be taken for estimation or justifying rate. This amount/rate has been given for
illustration purpose only.
3
IR Unified Standard Schedule of Rates - 2021 Basic Rate Sheet

(Rates of the Basic Elements are without GST)

1. Rates of Basic Element shall necessarily be without GST as provision of the GST has been made in the Analysis of Rates of Items. Accordingly, it must be ensured that Rates of basic
elements to be entered in this "Basic Input Data Sheet" while updation of USSOR are exclusive of GST. Similarly hire - charges of plant & machinery shall also be exclusive of GST.
However hire Charges shall be inclusive of cost of services of operating staff, Cost of lubricating oil, fuel and other consumables for running the plant and machinery unless othewise
specified in the Description of the Basic Element.
2. For hire charges of plant machinery, per day means single shift of eight working hours.
SL Description Unit Rate Code Rate (₹)
154 Hire charges for wood sawing machine including fuel and operator Day 0154 1,500.00
155 Hire charges of Jib crane attachable and detachable to BFR/BRH Day 0155 300.00
156 Hire charges of Portal Crane (with Fuel & Driver) Hour 0156 250.00
157 Hire charges of Insulated Rail Dolly Day 0157 20.00
158 Hire Charges of Inflatable emergency tower light 400 Watt Day 0158 50.00
159 Hire charges of boat with boatmen Day 0159 1,200.00
160 Hire charges of 3.0 m x 3.0 m waterproof Tent Day 0160 200.00
161 Hire charges of Chair Day 0161 15.00
162 Hire charges of Table Day 0162 50.00
163 Hire charges of Laptop / Computer with software & Printer Day 0163 300.00
164 Hire charges for plotter up to A0 size Day 0164 700.00
165 Hire Charges of Halogen Lamps 500 Watt Day 0165 40.00
166 Soil Quality Class SQ1 suitable for sub grade of embankment as per RDSO Specifications RDSO/2020/GE: IRS- Cum 0166 75.00
0004
167 Soil Quality Class SQ2 suitable for sub grade of embankment as per RDSO Specifications RDSO/2020/GE: IRS- Cum 0167 125.00
0004
168 Soil Quality Class SQ3 suitable for sub grade of embankment as per RDSO Specifications RDSO/2020/GE: IRS- Cum 0168 150.00
0004
169 Blasting Powder Kg 0169 50.00
170 Blasting Fuse (Fuse Wire) Each 0170 20.00
171 Bentonite powder MT 0171 4,025.00
172 Doob grass Sqm 0172 29.00
173 Sarkanda/ Sarpat Sqm 0173 45.00
174 Grass sods Sqm 0174 46.00
175 Non-woven Needle Punched and Mechanically or Thermally bonded type Geotextile for use as Sqm 0175 90.00
Separator/Filtration for Railway formation as per RDSO Specification No. RDSO/2018/GE:IRS-0004 - Part Iwith
minimum strengths in Grab test, Trapezoidal Tear test and Puncture test of 700N, 250 N and 1800 N
respectively

176 Non-woven Needle Punched and Mechanically or Thermally bonded type Geotextile for use as Sqm 0176 170.00
Separator/Filtration for Railway formation as per RDSO Specification No. RDSO/2018/GE:IRS-0004 - Part I with
minimum strengths in Grab test, Trapezoidal Tear test and Puncture test of 1750N, 800 N and 5800 N
respectively.

177 Geo-composite drain consisting of Geonet Core sandwiched between Non-Woven geo textile filters on both sides Sqm 0177 450.00
as per RDSO Specification No. RDSO/2018/GE:IRS-0006
178 Mechanically woven double twisted hexagonal shaped wire mesh gabion boxes of required sizes with 10mm x Cum 0178 1,495.00
12mm mesh of wire dia 2.7mm/3.7mm (ID/OD) and Zn & PVC coated
179 Diesel (HSD) Oil Litre 0179 94.60
180 Normal unleaded Petrol Litre 0180 105.00
181 Hydraulic oil SS-68 or equivalent of HPCL/BPCL/IOCL Litre 0181 100.00
182 Grease Graphite Grade 'O' (IS:408) Kg 0182 240.00
183 Kerosene Oil Litre 0183 56.00
184 Mobile Oil Litre 0184 250.00
185 Grease MP-2 or equivalent of HPCL/BPCL/IOCL Kg 0185 153.00
186 Ordinary Portland Cement 43 grade MT 0186 4,940.00
187 Ordinary Portland Cement 53 grade MT 0187 5,000.00
188 Pozzolana Portland Cement MT 0188 4,700.00
189 Sulphate Resisting Cement MT 0189 6,500.00
190 Plasticiser / Super Plasticiser Kg 0190 80.00
191 Admixture (anti shrinkage compound) for CC/RCC work Kg 0191 140.00
192 Synthetic polyester triangular fibre of length 6 mm, effective diameter 10-40 microns and specific gravity of 1.34 Kg 0192 400.00
to 1.40.
193 Waterproofing compound Kg 0193 207.00
194 Muriatic Acid Kg 0194 23.00
195 Surface protection material ESI Permaproof Litre 0195 253.00
196 Surface protection material ESI Permacil -GA Litre 0196 272.55
197 Surface protection material ESI Bond Litre 0197 278.30
198 Filled sand bags (30 kg weight) Each 0198 9.00

Note: The figures given in Amount/Rate Column (Which are strikethrough) are not to be taken for estimation or justifying rate. This amount/rate has been given for
illustration purpose only.
4
IR Unified Standard Schedule of Rates - 2021 Basic Rate Sheet

(Rates of the Basic Elements are without GST)

1. Rates of Basic Element shall necessarily be without GST as provision of the GST has been made in the Analysis of Rates of Items. Accordingly, it must be ensured that Rates of basic
elements to be entered in this "Basic Input Data Sheet" while updation of USSOR are exclusive of GST. Similarly hire - charges of plant & machinery shall also be exclusive of GST.
However hire Charges shall be inclusive of cost of services of operating staff, Cost of lubricating oil, fuel and other consumables for running the plant and machinery unless othewise
specified in the Description of the Basic Element.
2. For hire charges of plant machinery, per day means single shift of eight working hours.
SL Description Unit Rate Code Rate (₹)
199 Coarse Sand (Zone III) Cum 0199 1,200.00
200 Fine Sand (Zone IV) Cum 0200 1,000.00
201 Screened Sand Kg 0201 2.50
202 Stone Aggregate (single size) 63mm nominal Cum 0202 900.00
203 Stone Aggregate (Single size) : 40 mm nominal size Cum 0203 754.00
204 Stone Aggregate (Single size) : 20 mm nominal size Cum 0204 825.00
205 Stone Aggregate (Single size) : 10 mm nominal size Cum 0205 775.00
206 Stone Aggregate (Single size) : 06 mm nominal size Cum 0206 775.00
207 Stone grit 6mm and down size or pea sized gravel Cum 0207 600.00
208 Crusher Screening(Quarry Dust) Conforming to Grading Zone - I to Zone- II Cum 0208 600.00
209 Production cost of Track Ballast in quarry including loading in truck Cum 0209 569.00
210 Stone boulder, weighing minimum 35 kg each Cum 0210 750.00
211 Stone Spalls Cum 0211 445.00
212 Filter media of stone aggregate confirming to RDSO specification (12 cum loose to be taken as 10 cum after Cum 0212 1,200.00
compaction)
213 Low relaxation H T Strands conforming to IS 14268 latest version for prestressed concrete MT 0213 57,000.00
214 CRCA Sheathing Metre 0214 165.00
215 HDPE Sheathing Metre 0215 275.00
216 Tube anchorage set complete with bearing plate , permanent wedges etc. Each 0216 1,320.00
217 MS round bar for reinforcement- average rate for various dia Quintal 0217 3,600.00
218 Thermo Mechanically Treated Bars grade Fe 500D - or more.(Average of dia 10mm to 25mm) without GST Quintal 0218 5,974.00
219 G.I. Binding wire Kg 0219 51.75
220 Structural Steel Plates conforming to Grade Designation E 250; Quality "A" as per IS 2062 Quintal 0220 6,300.00

221 Structural steel such as T, Angles, Channels and R S Joists conforming to Grade Designation E 250; Quality Quintal 0221 4,950.00
"A" as per IS 2062
222 Structural steel plates conforming to Grade Designation E250; Quality "B0" as per IS:2062, Quintal 0222 7,330.00
223 Structural steel such as T, Angles, Channels and R S Joists conforming to Grade Designation E250; Quality Quintal 0223 5,730.00
"B0" as per IS:2062,
224 tructural steel such as T, Angles, Channels and R S Joists conforming to Grade Designation E 250; Quality Quintal 0224 5,860.00
"C" as per IS 2062
225 Structural steel such as T, Angles, Channels and R S Joists conforming to Grade Designation E250; Quality Quintal 0225 5,500.00
"BR" as per IS:2062,
226 Structural Steel such as T, Angles, Channels and R S Joists Grade Designation E350; Quality 'B0' as per IS Quintal 0226 6,000.00
2062
227 M S Flat upto 10 mm thickness Quintal 0227 6,300.00
228 HSFG bolt with DTI Wasters conforming to IRS B1-2001 with latest Correction Slips Kg 0228 100.00
229 Mild steel rivets for steel girders Quintal 0229 6,540.00
230 Rivets (different sizes) for miscellaneous works. Kg 0230 54.50
231 Nut & Bolts with washers of all sizes Kg 0231 80.00
232 Holding down HTS bolts with plates, nuts etc. Quintal 0232 7,500.00
233 Cup Grinding Stone Each 0233 900.00
234 Drill Bit 20-25 mm Each 0234 300.00
235 Electrodes 4 mm dia for steel fabrication work Metre 0235 15.00
236 Welding Rod for Gas Metal Arc Welding Kg 0236 116.82
237 SAW Welding Wire Kg 0237 66.00
238 Flux for SAW Weldging Kg 0238 65.00
239 Cost of Drifts Each 0239 65.00
240 Cost of Service Bolts for assembling of Girders Each 0240 35.00
241 Shielding Gas (Co2) for fabrication works Kg 0241 69.00
242 Aluminum Sheet / Strips of various sizes & thickness Kg 0242 200.00
243 GI Sheet 1.50 mm thick Quintal 0243 4,600.00
244 Mild steel chequered plate MT 0244 70,000.00
245 Anti skid Stainless steel chequered plate of 409 M Grade as per Specification ASTM A240 and Pattern MT 0245 140,000.00
conforming to BIS 3502
246 Stainless steel nut, bolts and washers Kg 0246 294.00
247 Polyvinyl chloride sheet 400 micron. Sqm 0247 40.25

Note: The figures given in Amount/Rate Column (Which are strikethrough) are not to be taken for estimation or justifying rate. This amount/rate has been given for
illustration purpose only.
5
IR Unified Standard Schedule of Rates - 2021 Basic Rate Sheet

(Rates of the Basic Elements are without GST)

1. Rates of Basic Element shall necessarily be without GST as provision of the GST has been made in the Analysis of Rates of Items. Accordingly, it must be ensured that Rates of basic
elements to be entered in this "Basic Input Data Sheet" while updation of USSOR are exclusive of GST. Similarly hire - charges of plant & machinery shall also be exclusive of GST.
However hire Charges shall be inclusive of cost of services of operating staff, Cost of lubricating oil, fuel and other consumables for running the plant and machinery unless othewise
specified in the Description of the Basic Element.
2. For hire charges of plant machinery, per day means single shift of eight working hours.
SL Description Unit Rate Code Rate (₹)
248 Z section sheet piles AZ 18-800 (Arcellor Mittal) or equivalent & bracing Quintal 0248 4,500.00
249 G.I. wire 4mm dia Kg 0249 70.00
250 MS Bolts & Nuts below 10mm dia Kg 0250 60.00
251 MS bolts & nuts more than 10 mm dia Quintal 0251 8,500.00
252 100mm channel shoulder 2.5 m long (Shuttering material) Each 0252 1,322.50
253 MS tube 40mm dia (Shuttering material) Metre 0253 293.25
254 Wall form Panel 1250mm x 450mm (Shuttering material) Each 0254 1,150.00
255 Adjustable telescopic prop 3m (2.02m-3.75m) (Shuttering material) Each 0255 1,265.00
256 Beam Clamp 300-380mm (450mm-1070mm) (Shuttering material) Set 0256 454.25
257 Cadmium plated full threaded steel screws (30mm x 4mm dia) (Shuttering material) 100 nos. 0257 35.65
258 Aluminium washer 2mm thick & 15 mm dia (Shuttering material) 100 nos. 0258 28.75
259 uPVC Pipe- type A ISI marked 110mm dia (working pressure 4Kg/cm2) Metre 0259 160.00
260 uPVC Pipe- type A ISI marked 160mm dia Metre 0260 350.00
261 GI Pipe 50 mm dia , B Class Medium duty Metre 0261 315.35
262 GI Pipe 100 mm dia , B Class Medium duty Metre 0262 731.55
263 Clamps and MS stays including bolts and nuts for 100mm dia pipe Each 0263 90.00
264 Clamps and MS stays including bolts and nuts for 50mm dia pipe Each 0264 53.00
265 C I grating 100mm x 100mm Each 0265 75.00
266 Etch primer as per IS: 5666 Litre 0266 340.00
267 Aluminium wire for spraying Kg 0267 219.93
268 Elastomeric bearing assembly consisting of 7 layers of Elastomer bonded to 6 nos. internal reinforcing steel Each 0268 15,360.00
laminates by the process of vulcanisation, complete with all components as per drawing and Technical
Specification (Each of 19200 Cu Cm)
269 Cast steel rocker bearing assembly of 250 tonne design load capacity duly painted complete with all its Each 0269 100,000.00
components as per drawing and specifications
270 Forged steel roller bearing of 250 tonne design load capacity duly painted complete with all its components as Each 0270 150,000.00
per drawing and specifications
271 PTFE sliding plate bearing assembly of 80 tonnes design load capacity duly painted complete with all its Each 0271 24,000.00
components as per drawing and Technical Specifications
272 300 MT Capacity Pot Cum PTFE Bearing (Free end ) assembly consisting of a metal piston supported by a disc Each 0272 57,880.00
of un reinforced elastomer that is confined with in the metal cylinder and sliding assembly comprising of stainless
steel attached to metal backing plate sliding in horizontal plane over PTFE confined in recess(s) on the piston
with internal seal (Brass laminated rings), hard facings, external seal & wiper seal etc complete with cast steel
assemblies/fabricated structural steel assemblies duly painted with all components complete as per drawings and
Technical Specifications.

273 300 MT Capacity Pot cum PTFE bearing (Fixed type) assembly consisting of a metal piston supported by un Each 0273 83,045.00
reinforced elastomer confined in the pot with brass ring sealing making with cast steel assemblies/fabricated
structural steel assemblies duly painted with all components complete as per drawings and Technical
Specifications.

274 300 MT capacity Pot Cum PTFE GUIDED (L) Bearing assembly consisting of a metal piston supported by a Each 0274 101,185.00
disc of un reinforced elastomer that is confined with in the metal cylinder and sliding assembly with guiding
arrangement to bear and resist the horizontal force in the desired direction comprising of stain less steel attached
to metal backing plate sliding in horizontal plane over PTFE confined in recess (s)on the piston with internal seal
(Brass laminated rings),hard facings, external seal & wiper seal etc complete with cast steel
assemblies/fabricated structural steel assemblies duly painted with all components complete as per drawings and
Technical Specifications.

275 300 MT capacity Pot Cum PTFE GUIDED(T) Bearing assembly consisting of a metal piston supported by a Each 0275 96,790.00
disc of un reinforced elastomer that is confined with in the metal cylinder and sliding assembly with guiding
arrangement to bear and resist the horizontal force in the desired direction comprising of stain less steel attached
to metal backing plate sliding in horizontal plane over PTFE confined in recess (s)on the piston with internal seal
(Brass laminated rings),hard facings ,external seal & wiper seal etc complete with cast steel
assemblies/fabricated structural steel assemblies duly painted with all components complete as per drawings and
Technical Specifications.

Note: The figures given in Amount/Rate Column (Which are strikethrough) are not to be taken for estimation or justifying rate. This amount/rate has been given for
illustration purpose only.
6
IR Unified Standard Schedule of Rates - 2021 Basic Rate Sheet

(Rates of the Basic Elements are without GST)

1. Rates of Basic Element shall necessarily be without GST as provision of the GST has been made in the Analysis of Rates of Items. Accordingly, it must be ensured that Rates of basic
elements to be entered in this "Basic Input Data Sheet" while updation of USSOR are exclusive of GST. Similarly hire - charges of plant & machinery shall also be exclusive of GST.
However hire Charges shall be inclusive of cost of services of operating staff, Cost of lubricating oil, fuel and other consumables for running the plant and machinery unless othewise
specified in the Description of the Basic Element.
2. For hire charges of plant machinery, per day means single shift of eight working hours.
SL Description Unit Rate Code Rate (₹)
276 250 MT Capacity Pot Cum PTFE Bearing (Free end ) assembly consisting of a metal piston supported by a disc Each 0276 47,380.00
of unreinforced elastomer that is confined with in the metal cylinder and sliding assembly comprising of stain less
steel attached to metal backing plate sliding in horizontal plane over PTFE confined in recess (s)on the piston
with internal seal (Brass laminated rings),hard facings ,external seal & wiper seal etc complete with cast steel
assemblies/fabricated structural steel assemblies duly painted with all components complete as per drawings and
Technical Specifications.

277 250 MT Capacity Pot type bearing (Fixed) assembly consisting of a metal piston supported by un reinforced Each 0277 62,045.00
elastomer confined in the pot with brass ring sealing making with cast steel assemblies/fabricated structural
steel assemblies duly painted with all components complete as per drawings and Technical Specifications.

278 250 MT Capacity Pot Cum PTFE GUIDED(L)Bearing assembly consisting of a metal piston supported by a disc Each 0278 77,390.00
of un reinforced elastomer that is confined with in the metal cylinder and sliding assembly with guiding
arrangement to bear and resist the horizontal force in the desired direction comprising of stain less steel attached
to metal backing plate sliding in horizontal plane over PTFE confined in recess (s)on the piston with internal seal
(Brass laminated rings),hard facings ,external seal & wiper seal etc complete with cast steel
assemblies/fabricated structural steel assemblies duly painted with all components complete as per drawings and
Technical Specifications.

279 250MT Capacity Pot Cum PTFE GUIDED(T)Bearing assembly consisting of a metal piston supported by a disc Each 0279 72,695.00
of un reinforced elastomer that is confined with in the metal cylinder and sliding assembly with guiding
arrangement to bear and resist the horizontal force in the desired direction comprising of stain less steel attached
to metal backing plate sliding in horizontal plane over PTFE confined in recess (s)on the piston with internal seal
(Brass laminated rings),hard facings ,external seal & wiper seal etc complete with cast steel
assemblies/fabricated structural steel assemblies duly painted with all components complete as per drawings and
Technical Specifications.

280 200 MT Capacity Pot Cum PTFE Bearing (Free end) assembly consisting of a metal piston supported by a disc Each 0280 36,655.00
of un reinforced elastomer that is confined with in the metal cylinder and sliding assembly comprising of stain
less steel attached to metal backing plate sliding in horizontal plane over PTFE confined in recess (s)on the
piston with internal seal (Brass laminated rings),hard facings ,external seal & wiper seal etc complete with cast
steel assemblies/fabricated structural steel assemblies duly painted with all components complete as per
drawings and Technical Specifications.

281 200 MT Capacity Pot type bearing (Fixed type) assembly consisting of a metal piston supported by un reinforced Each 0281 45,025.00
elastomer confined in the pot with brass ring sealing making with cast steel assemblies/fabricated structural
steel assemblies duly painted with all components complete as per drawings and Technical Specifications.

282 200 MT Capacity Pot Cum PTFE GUIDED(L)Bearing assembly consisting of a metal piston supported by a disc Each 0282 57,140.00
of un reinforced elastomer that is confined with in the metal cylinder and sliding assembly with guiding
arrangement to bear and resist the horizontal force in the desired direction comprising of stain less steel attached
to metal backing plate sliding in horizontal plane over PTFE confined in recess (s)on the piston with internal seal
(Brass laminated rings),hard facings ,external seal & wiper seal etc complete with cast steel
assemblies/fabricated structural steel assemblies duly painted with all components complete as per drawings and
Technical Specifications.

283 200 MT Capacity Pot Cum PTFE Guided (T) Bearing assembly consisting of a metal piston supported by a disc Each 0283 52,805.00
of un reinforced elastomer that is confined with in the metal cylinder and sliding assembly with guiding
arrangement to bear and resist the horizontal force in the desired direction comprising of stain less steel attached
to metal backing plate sliding in horizontal plane over PTFE confined in recess (s)on the piston with internal seal
(Brass laminated rings),hard facings ,external seal & wiper seal etc complete with cast steel
assemblies/fabricated structural steel assemblies duly painted with all components complete as per drawings and
Technical Specifications.

284 150 MT Capacity Pot Cum PTFE Bearing (Free end ) assembly consisting of a metal piston supported by a disc Each 0284 25,320.00
of un reinforced elastomer that is confined with in the metal cylinder and sliding assembly comprising of stain
less steel attached to metal backing plate sliding in horizontal plane over PTFE confined in recess (s)on the
piston with internal seal (Brass laminated rings),hard facings ,external seal & wiper seal etc complete with cast
steel assemblies/fabricated structural steel assemblies duly painted with all components complete as per
drawings and Technical Specifications.

Note: The figures given in Amount/Rate Column (Which are strikethrough) are not to be taken for estimation or justifying rate. This amount/rate has been given for
illustration purpose only.
7
IR Unified Standard Schedule of Rates - 2021 Basic Rate Sheet

(Rates of the Basic Elements are without GST)

1. Rates of Basic Element shall necessarily be without GST as provision of the GST has been made in the Analysis of Rates of Items. Accordingly, it must be ensured that Rates of basic
elements to be entered in this "Basic Input Data Sheet" while updation of USSOR are exclusive of GST. Similarly hire - charges of plant & machinery shall also be exclusive of GST.
However hire Charges shall be inclusive of cost of services of operating staff, Cost of lubricating oil, fuel and other consumables for running the plant and machinery unless othewise
specified in the Description of the Basic Element.
2. For hire charges of plant machinery, per day means single shift of eight working hours.
SL Description Unit Rate Code Rate (₹)
285 150MT Capacity Pot type bearing (Fixed type) assembly consisting of a metal piston supported by un reinforced Each 0285 29,985.00
elastomer confined in the pot with brass ring sealing making with cast steel assemblies/fabricated structural
steel assemblies duly painted with all components complete as per drawings and Technical Specifications.

286 150MT Capacity Pot Cum PTFE Guided (L) Bearing assembly consisting of a metal piston supported by a disc Each 0286 38,745.00
of un reinforced elastomer that is confined with in the metal cylinder and sliding assembly with guiding
arrangement to bear and resist the horizontal force in the desired direction comprising of stain less steel attached
to metal backing plate sliding in horizontal plane over PTFE confined in recess (s)on the piston with internal seal
(Brass laminated rings),hard facings ,external seal & wiper seal etc complete with cast steel
assemblies/fabricated structural steel assemblies duly painted with all components complete as per drawings and
Technical Specifications.

287 150MT Capacity Pot Cum PTFE Guided (T) Bearing assembly consisting of a metal piston supported by a disc Each 0287 35,760.00
of un reinforced elastomer that is confined with in the metal cylinder and sliding assembly with guiding
arrangement to bear and resist the horizontal force in the desired direction comprising of stain less steel attached
to metal backing plate sliding in horizontal plane over PTFE confined in recess (s)on the piston with internal seal
(Brass laminated rings),hard facings ,external seal & wiper seal etc complete with cast steel
assemblies/fabricated structural steel assemblies duly painted with all components complete as per drawings and
Technical Specifications.

288 100MT Capacity Pot Cum PTFE Bearing (Free end ) assembly consisting of a metal piston supported by a disc Each 0288 16,350.00
of un reinforced elastomer that is confined with in the metal cylinder and sliding assembly comprising of stain
less steel attached to metal backing plate sliding in horizontal plane over PTFE confined in recess (s)on the
piston with internal seal (Brass laminated rings),hard facings ,external seal & wiper seal etc complete with cast
steel assemblies/fabricated structural steel assemblies duly painted with all components complete as per
drawings and Technical Specifications.

289 100MT Capacity Pot type bearing (Fixed type) assembly consisting of a metal piston supported by un reinforced Each 0289 17,385.00
elastomer confined in the pot with brass ring sealing making with cast steel assemblies/fabricated structural
steel assemblies duly painted with all components complete as per drawings and Technical Specifications.

290 100MT Capacity Pot Cum PTFE Guided (L) Bearing assembly consisting of a metal piston supported by a disc Each 0290 25,625.00
of un reinforced elastomer that is confined with in the metal cylinder and sliding assembly with guiding
arrangement to bear and resist the horizontal force in the desired direction comprising of stain less steel attached
to metal backing plate sliding in horizontal plane over PTFE confined in recess (s)on the piston with internal seal
(Brass laminated rings),hard facings ,external seal & wiper seal etc complete with cast steel
assemblies/fabricated structural steel assemblies duly painted with all components complete as per drawings and
Technical Specifications.

291 100MT Capacity Pot Cum PTFE Guided (T) Bearing assembly consisting of a metal piston supported by a disc Each 0291 23,350.00
of un reinforced elastomer that is confined with in the metal cylinder and sliding assembly with guiding
arrangement to bear and resist the horizontal force in the desired direction comprising of stain less steel attached
to metal backing plate sliding in horizontal plane over PTFE confined in recess (s)on the piston with internal seal
(Brass laminated rings),hard facings ,external seal & wiper seal etc complete with cast steel
assemblies/fabricated structural steel assemblies duly painted with all components complete as per drawings and
Technical Specifications.

292 300 MT Capacity Spherical fixed bearing consists of an assembly of precision machined steel components with Each 0292 65,185.00
spherical concave and convex elements in its centre designed and sized according the specific requirements
.The bottom plate with a spherically concave top face covered with a recessed PTFE sheet .The top component
is a solid stainless steel plate with spherically machined convex bottom face mating with concave curved surface
fixed by restraining rings to restrict the horizontal movement as a complete unit made up of with Mild steel/cast
iron steel/Stainless steel conforming to IS 2062 Grade -B & IS 1030 Grade 280-520W or 340-570W,AISI 304/316
shall be used for the backing plates with flat or curved surfaces.

Note: The figures given in Amount/Rate Column (Which are strikethrough) are not to be taken for estimation or justifying rate. This amount/rate has been given for
illustration purpose only.
8
IR Unified Standard Schedule of Rates - 2021 Basic Rate Sheet

(Rates of the Basic Elements are without GST)

1. Rates of Basic Element shall necessarily be without GST as provision of the GST has been made in the Analysis of Rates of Items. Accordingly, it must be ensured that Rates of basic
elements to be entered in this "Basic Input Data Sheet" while updation of USSOR are exclusive of GST. Similarly hire - charges of plant & machinery shall also be exclusive of GST.
However hire Charges shall be inclusive of cost of services of operating staff, Cost of lubricating oil, fuel and other consumables for running the plant and machinery unless othewise
specified in the Description of the Basic Element.
2. For hire charges of plant machinery, per day means single shift of eight working hours.
SL Description Unit Rate Code Rate (₹)
293 300 MT Capacity Spherical free float bearing consists of an assembly of precision machined steel components Each 0293 55,860.00
with spherical concave and convex elements in its centre designed and sized according the specific requirements
.The bottom plate with a spherically concave top face covered with a recessed PTFE sheet .The top component
is a solid stainless steel plate with spherically machined convex bottom face mating with concave curved surface
. Sliding assembly attached consists of a polished stainless sheet welded to the under side of top steel plate
slides on PTFE disc recessed or bonded to the upper surface of convex plate as complete unit made up of with
Mild steel/cast iron steel/Stainless steel conforming to IS 2062 Grade -B & IS 1030 Grade 280-520W or 340-
570W,AISI 304/316 shall be used for the backing plates with flat or curved surfaces, Stainless sheet shall be in
accordance with AISI316L OR of IS 6911 of minimum thick 3mm

294 300 MT Capacity Spherical Slide Guide (L) bearing consists of an assembly of precision machined steel Each 0294 79,400.00
components with spherical concave and convex elements in its centre designed and sized according the specific
requirements .The bottom plate with a spherically concave top face covered with a recessed PTFE sheet .The
top component is a solid stainless steel plate with spherically machined convex bottom face mating with concave
curved surface . Sliding assembly with guiding system bear and transmit the horizontal force in one direction and
allowing the movement perpendicular to above (Longitudinal direction) consisting of a polished stainless sheet
welded to the under side of top steel plate slides on PTFE disc recessed or bonded to the upper surface of
convex plate as complete unit made up of with Mild steel/cast iron steel/Stainless steel conforming to IS 2062
Grade -B & IS 1030 Grade 280-520W or 340-570W,AISI 304/316 shall be used for the backing plates with flat or
curved surfaces, Stainless sheet shall be in accordance with AISI316L OR of IS 6911 of minimum thick 3mm.

295 300 MT Capacity Spherical Slide Guide (T) bearing consists of an assembly of precision machined steel Each 0295 75,560.00
components with spherical concave and convex elements in its centre designed and sized according the specific
requirements .The bottom plate with a spherically concave top face covered with a recessed PTFE sheet .The
top component is a solid stainless steel plate with spherically machined convex bottom face mating with concave
curved surface . Sliding assembly with guiding system bear and transmit the horizontal force in one direction and
allowing the movement perpendicular to above (Transverse direction) consisting of a polished stainless sheet
welded to the under side of top steel plate slides on PTFE disc recessed or bonded to the upper surface of
convex plate as complete unit made up of with Mild steel/cast iron steel/Stainless steel conforming to IS 2062
Grade -B & IS 1030 Grade 280-520W or 340-570W,AISI 304/316 shall be used for the backing plates with flat or
curved surfaces, Stainless sheet shall be in accordance with AISI316L OR of IS 6911 of minimum thick 3mm

296 Single coil spring washer for bridge bearing for 36 mm dia bolts Each 0296 12.00
297 Hot melt Thermo plastic road marking paint Litre 0297 160.00
298 Luminous Paint as per RDSO's Spec. no. M&C/PCN/120-2011 Litre 0298 300.00
299 Bituminous Emulsion without Mica (IP no. 56192 and RDSO Specification no.P30-1996) Litre 0299 200.00
300 Solvent confirming to IS Specification 1745-1976. Litre 0300 150.00
301 High build epoxy paint (two pack) as per RDSO's Specn. No. M&C/PCN/111/88 Litre 0301 440.00
302 Anti-corrosive Bituminous Paint (Black) confirming to IS:9862 Litre 0302 80.00
303 Anti-corrosive Paint as per RDSO's Specn. No. M&C/PCN/123/2012 Litre 0303 280.00
304 Enamel Paint as per RDSO's Spec. no.M&C/PCN/120-2011 Litre 0304 190.00
305 Ready mix Zinc Chromate primer as per IS 104 Litre 0305 100.00
306 Zinc Chromate red oxide Primer to IS:2074 Litre 0306 130.00
307 Aluminium paint Litre 0307 160.00
308 Synthetic Enamel Paint in Black or Chocolate shade Litre 0308 220.00
309 Epoxy paint as per RDSO Spec M&C/PCN/123-11 Litre 0309 440.00
310 Ready Mixed Paint as per IS:13607 Litre 0310 230.00
311 Wire Brush - 25cm long Each 0311 15.00
312 Soft Brush for painting - 25cm long Each 0312 33.00
313 Paint Brush (writing) of any size Each 0313 150.00
314 Industrial grade blown type Petroleum Bitumen of grade 85/25 as per IS:702 MT 0314 47,000.00
315 Coal tar Emulsion Litre 0315 50.00
316 Bitumen emulsion for road of grade RS-1 confirming to IS 8887 MT 0316 37,000.00
317 Bitumen Hot sealing compound : Gr. A MT 0317 28,000.00
318 Synthetic Rubber based Adhesive Litre 0318 200.00
319 Epoxy for fixing HDPE dowel, Rubber Pads as per RDSO approved specification Kg 0319 500.00

Note: The figures given in Amount/Rate Column (Which are strikethrough) are not to be taken for estimation or justifying rate. This amount/rate has been given for
illustration purpose only.
9
IR Unified Standard Schedule of Rates - 2021 Basic Rate Sheet

(Rates of the Basic Elements are without GST)

1. Rates of Basic Element shall necessarily be without GST as provision of the GST has been made in the Analysis of Rates of Items. Accordingly, it must be ensured that Rates of basic
elements to be entered in this "Basic Input Data Sheet" while updation of USSOR are exclusive of GST. Similarly hire - charges of plant & machinery shall also be exclusive of GST.
However hire Charges shall be inclusive of cost of services of operating staff, Cost of lubricating oil, fuel and other consumables for running the plant and machinery unless othewise
specified in the Description of the Basic Element.
2. For hire charges of plant machinery, per day means single shift of eight working hours.
SL Description Unit Rate Code Rate (₹)
320 Araldite GY257 Kg 0320 379.50
321 Epoxy Hardener HY850 Kg 0321 370.30
322 Paint Brush 100 mm Each 0322 90.00
323 Paint Brush 75 mm Each 0323 70.00
324 Paint Brush 50 mm Each 0324 40.00
325 Paint Brush 25 mm Each 0325 20.00
326 Supply of complete assembly of strip seal expansion joint for 40mm expansion , comprising of edge beams, Metre 0326 4,000.00
anchorage, strip seal element and complete assembly as per approved specification and drawings

327 Supply of complete assembly of strip seal expansion joint for 80mm expansion , comprising of edge beams, Metre 0327 5,500.00
anchorage, strip seal element and complete assembly as per approved specification and drawings

328 Supply of complete assembly of strip seal expansion joint for 120mm expansion , comprising of edge beams, Metre 0328 6,500.00
anchorage, strip seal element and complete assembly as per approved specification and drawings
329 Supply of complete assembly of strip seal expansion joint for 160mm expansion , comprising of edge beams, Metre 0329 8,000.00
anchorage, strip seal element and complete assembly as per approved specification and drawings
330 Welding cable copper 50 mm2 Metre 0330 110.00
331 500 Amp Arc welding Electrode holder Each 0331 85.00
332 Welding & cutting torch Each 0332 950.00
333 Hand gloves leather Set 0333 250.00
334 Welding Hose rubber for Oxygen/D.A. 6mm dia Metre 0334 28.00
335 Welding screen Each 0335 150.00
336 Welding by Electric Plant Cm 0336 1.00
337 Commercial LPG (in cylinder) Kg 0337 73.71
338 Oxygen Gas (in cylinder) Kg 0338 50.00
339 Acetylene Gas (in cylinder) Kg 0339 65.00
340 Pressure Regulator for Oxygen/Acetylene cylinder Each 0340 1,450.00
341 Hard Variety Jungle Wood blocks 10 Cudm 0341 350.00
342 2nd class deodar wood in scantling 10 Cudm 0342 465.00
343 Fuel wood Quintal 0343 4,000.00
344 Crack filling epoxy for guniting and pressure grouting work Kg 0344 650.00
345 Accelerator compound for guniting Kg 0345 140.00
346 GI/MS nipple size 20mm dia Each 0346 15.00
347 Pre-packed polymer concrete based on epoxy system complete with curing compound, initiator and promoter Kg 0347 10.00
348 Epoxy mortar for concrete repair kg 0348 25.00
349 Epoxy resin hardener mix for seal coat Kg 0349 150.00
350 Acrylic polymer bonding coat Litre 0350 150.00
351 Pre packed cement based polymer mortar of strength 45 Mpa at 28 days Kg 0351 22.00
352 Wire mesh size 50mm x 50mm of 3mm wire Kg 0352 80.00
353 Wire mesh (Rabbit) Sqm 0353 67.20
354 Galvanised steel fibre Kg 0354 200.00
355 Galvanised chain link mesh netting of 80mm x 80mm mesh size Sqm 0355 180.00
356 Galvanised spiral lock spring Each 0356 19.20
357 Epoxy coated washer plate of 200mm x 200mm x 6mm size Each 0357 156.00
358 Anchor fastener of 10mm dia and 110mm length Each 0358 72.00
359 Bottom anchors of 16mm dia HYSD & 1m length Each 0359 276.00
360 Galvanised steel wire mesh rope net made of 9mm dia steel wire rope having aperture size of 45cm x 60cm with Sqm 0360 468.00
6m length hangs
361 NP 4 Class RCC pipe 300mm dia Metre 0361 600.00
362 NP 4 Class RCC pipe 450mm dia Metre 0362 950.00
363 NP 4 Class RCC pipe 600mm dia Metre 0363 1,630.00
364 NP 4 Class RCC pipe 900mm dia Metre 0364 3,200.00
365 NP 4 Class RCC pipe 1000mm dia Metre 0365 4,100.00
366 NP 4 Class RCC pipe 1200mm dia Metre 0366 5,500.00
367 NP 4 Class RCC pipe 1800mm dia Metre 0367 13,300.00

Note: The figures given in Amount/Rate Column (Which are strikethrough) are not to be taken for estimation or justifying rate. This amount/rate has been given for
illustration purpose only.
10
IR Unified Standard Schedule of Rates - 2021 Basic Rate Sheet

(Rates of the Basic Elements are without GST)

1. Rates of Basic Element shall necessarily be without GST as provision of the GST has been made in the Analysis of Rates of Items. Accordingly, it must be ensured that Rates of basic
elements to be entered in this "Basic Input Data Sheet" while updation of USSOR are exclusive of GST. Similarly hire - charges of plant & machinery shall also be exclusive of GST.
However hire Charges shall be inclusive of cost of services of operating staff, Cost of lubricating oil, fuel and other consumables for running the plant and machinery unless othewise
specified in the Description of the Basic Element.
2. For hire charges of plant machinery, per day means single shift of eight working hours.
SL Description Unit Rate Code Rate (₹)
368 Designing and developing detailed structural and working Drawings for open / Pile / well foundation for RCC Set 0368 17,250.00
column / piers for ROB/RUB/Bridges, based on Railway's approved GADs, duly designing the members and
submission of check plot duly getting proof checked by Railway approved institutes.
369 Designing and developing detailed structural and working Drawings for RCC bed block for ROB/RUB/Bridges, Set 0369 5,175.00
based on Railway's approved GADs, duly designing the members and submission of check plot duly getting proof
checked by Railway approved institutes.
370 Designing and developing detailed structural and working Drawings for foundation and sub structure for RCC Set 0370 17,250.00
retaining wall, abutment and approach slab for ROB/RUB/Bridges, based on Railway's approved GADs, duly
designing the members and submission of check plot duly getting proof checked by Railway approved institutes.

371 Exploratory drilling of boreholes of 150mm dia. in all type of soils except hard rock / large boulders (boulder core Metre 0371 796.00
more than 30cm), for collecting the undisturbed core sample including refilling, reinstating surface and disposing
off surplus material including use of mechanical rigs with power operated winches as well as
percussion/chieselling tool for advancing through occasional seams of hard strata, where necessary with
contractor's labour, tools, plants, machinery, equipment, consumables etc., with all lead and lift complete as per
specifications and as directed by the Engineer-in-charge in Dry area 0-10m

372 Exploratory drilling of boreholes of 150mm dia. in all type of soils except hard rock / large boulders (boulder core Metre 0372 836.00
more than 30cm), for collecting the undisturbed core sample including refilling, reinstating surface and disposing
off surplus material including use of mechanical rigs with power operated winches as well as
percussion/chieselling tool for advancing through occasional seams of hard strata, where necessary with
contractor's labour, tools, plants, machinery, equipment, consumables etc., with all lead and lift complete as per
specifications and as directed by the Engineer-in-charge in Dry area 10m-20m

373 Exploratory drilling of boreholes of 150mm dia. in all type of soils except hard rock / large boulders (boulder core Metre 0373 880.00
more than 30cm), for collecting the undisturbed core sample including refilling, reinstating surface and disposing
off surplus material including use of mechanical rigs with power operated winches as well as
percussion/chieselling tool for advancing through occasional seams of hard strata, where necessary with
contractor's labour, tools, plants, machinery, equipment, consumables etc., with all lead and lift complete as per
specifications and as directed by the Engineer-in-charge in Dry area 20m-30m

374 Exploratory drilling of boreholes of 150mm dia. in all type of soils except hard rock / large boulders (boulder core Metre 0374 955.00
more than 30cm), for collecting the undisturbed core sample including refilling, reinstating surface and disposing
off surplus material including use of mechanical rigs with power operated winches as well as
percussion/chieselling tool for advancing through occasional seams of hard strata, where necessary with
contractor's labour, tools, plants, machinery, equipment, consumables etc., with all lead and lift complete as per
specifications and as directed by the Engineer-in-charge in Dry area 30m-40m

375 Exploratory drilling of boreholes of 150mm dia. in all type of soils except hard rock / large boulders (boulder core Metre 0375 1,100.00
more than 30cm), for collecting the undisturbed core sample including refilling, reinstating surface and disposing
off surplus material including use of mechanical rigs with power operated winches as well as
percussion/chieselling tool for advancing through occasional seams of hard strata, where necessary with
contractor's labour, tools, plants, machinery, equipment, consumables etc., with all lead and lift complete as per
specifications and as directed by the Engineer-in-charge in Dry area 40m-50m

376 Exploratory drilling of boreholes of 150mm dia. in all type of soils except hard rock / large boulders (boulder core Metre 0376 1,300.00
more than 30cm), for collecting the undisturbed core sample including refilling, reinstating surface and disposing
off surplus material including use of mechanical rigs with power operated winches as well as
percussion/chieselling tool for advancing through occasional seams of hard strata, where necessary with
contractor's labour, tools, plants, machinery, equipment, consumables etc., with all lead and lift complete as per
specifications and as directed by the Engineer-in-charge in Dry area 50m-60m

377 Exploratory drilling of boreholes of 150mm dia. in all type of soils except hard rock / large boulders (boulder core Metre 0377 1,400.00
more than 30cm), for collecting the undisturbed core sample including refilling, reinstating surface and disposing
off surplus material including use of mechanical rigs with power operated winches as well as
percussion/chieselling tool for advancing through occasional seams of hard strata, where necessary with
contractor's labour, tools, plants, machinery, equipment, consumables etc., with all lead and lift complete as per
specifications and as directed by the Engineer-in-charge in Dry area 60m-70m

Note: The figures given in Amount/Rate Column (Which are strikethrough) are not to be taken for estimation or justifying rate. This amount/rate has been given for
illustration purpose only.
11
IR Unified Standard Schedule of Rates - 2021 Basic Rate Sheet

(Rates of the Basic Elements are without GST)

1. Rates of Basic Element shall necessarily be without GST as provision of the GST has been made in the Analysis of Rates of Items. Accordingly, it must be ensured that Rates of basic
elements to be entered in this "Basic Input Data Sheet" while updation of USSOR are exclusive of GST. Similarly hire - charges of plant & machinery shall also be exclusive of GST.
However hire Charges shall be inclusive of cost of services of operating staff, Cost of lubricating oil, fuel and other consumables for running the plant and machinery unless othewise
specified in the Description of the Basic Element.
2. For hire charges of plant machinery, per day means single shift of eight working hours.
SL Description Unit Rate Code Rate (₹)
378 Extra for 150mm dia. bore in hard Rock/large Boulder at all levels Metre 0378 1,489.00
379 Drilling of NX size borehole (75mm dia.) in all types of hard rock (fresh rock) and collection of rock core samples Metre 0379 2,284.00
from boreholes and preserving in boxes 0m-10m
380 Drilling of NX size borehole (75mm dia.) in all types of hard rock (fresh rock) and collection of rock core samples Metre 0380 2,399.00
from boreholes and preserving in boxes 10m-20m
381 Drilling of NX size borehole (75mm dia.) in all types of hard rock (fresh rock) and collection of rock core samples Metre 0381 2,558.00
from boreholes and preserving in boxes 20m-30m
382 Drilling of NX size borehole (75mm dia.) in all types of hard rock (fresh rock) and collection of rock core samples Metre 0382 2,741.00
from boreholes and preserving in boxes 30m-40m
383 Drilling of NX size borehole (75mm dia.) in all types of hard rock (fresh rock) and collection of rock core samples Metre 0383 2,835.00
from boreholes and preserving in boxes 40m-50m
384 Drilling of NX size borehole (75mm dia.) in all types of hard rock (fresh rock) and collection of rock core samples Metre 0384 3,056.00
from boreholes and preserving in boxes 50m-60m
385 Drilling of NX size borehole (75mm dia.) in all types of hard rock (fresh rock) and collection of rock core samples Metre 0385 3,300.00
from boreholes and preserving in boxes 60m-70m
386 Conducting in-situ full size Plate Load Test (PLT) at selected location as per IS:10042 including making loading Each 0386 15,000.00
arrangements & casting of RCC/cast in-situ concrete footing as per codal provisions including excavation and
refilling of trial pit : Plate size- 30cm x 30cm
387 Conducting in-situ full size Plate Load Test (PLT) at selected location as per IS:10042 including making loading Each 0387 18,000.00
arrangements & casting of RCC/cast in-situ concrete footing as per codal provisions including excavation and
refilling of trial pit : Plate size- 45cm x 45cm
388 Conducting in-situ full size Plate Load Test (PLT) at selected location as per IS:10042 including making loading Each 0388 21,500.00
arrangements & casting of RCC/cast in-situ concrete footing as per codal provisions including excavation and
refilling of trial pit : Plate size- 60cm x 60cm
389 Conducting in situ Vane shear test for soil as per IS:4434 Each 0389 2,200.00
390 Conducting SCPT for soil as per IS:4968 Each 0390 35,000.00
391 Conducting DCPT for soil as per IS:4968 Each 0391 29,000.00
392 Conducting determination of California Bearing Ratio (CBR) as per IS:2720 Each 0392 1,000.00
393 Taking out 100mm dia. & 450mm long undisturbed samples of soil from bore holes, including provision of air tight Each 0393 103.00
containers for packing and, labelling incl. transporting the samples to laboratory. Piston sampler shall be used for
extracting undisturbed samples where necessary. Samples shall be collected as per IS:2720.

394 Taking out 100mm dia. & 450mm long disturbed samples of soil from bore holes, including provision of air tight Each 0394 110.00
containers for packing, labelling and transporting the samples to laboratory. Samples shall be collected as per
IS:2720.
395 Conducting standard penetration test as per IS:2131 at approximate1.5m intervals in bore holes, as directed by Each 0395 600.00
the Engineer in charge
396 Collection of water samples at required intervals Each 0396 170.00
397 Moisture Contents/Dry Density Each 0397 200.00
398 Atterberg Limit Each 0398 400.00
399 Specific Gravity Each 0399 400.00
400 Grain size analysis including Hydrometer analysis Each 0400 550.00
401 Direct Shear Test Each 0401 1,500.00
402 Natural Density Test Each 0402 450.00
403 Consolidation Test Each 0403 5,000.00
404 Unconfined Compression Test Each 0404 1,500.00
405 Tri-axial Test Each 0405 1,500.00
406 Density Test Each 0406 200.00
407 Water Absorption & Porosity Each 0407 200.00
408 Hardness Test Each 0408 100.00
409 Unconfined Compression Test for rock Each 0409 1,500.00
410 Point Load Test Each 0410 800.00
411 Modulus of Elasticity Each 0411 4,000.00
412 Abrasion Testing Each 0412 450.00
413 Conducting chemical analysis of ground water samples to determine suitability for concreting and Each 0413 1,000.00
aggressiveness in relation to attack on concrete / reinforcement including determination of pH value
414 Conducting chemical analysis of soil samples to determine aggressiveness in relation to attack on concrete / Each 0414 1,000.00
reinforcement including determination of pH value

Note: The figures given in Amount/Rate Column (Which are strikethrough) are not to be taken for estimation or justifying rate. This amount/rate has been given for
illustration purpose only.
12
IR Unified Standard Schedule of Rates - 2021 Basic Rate Sheet

(Rates of the Basic Elements are without GST)

1. Rates of Basic Element shall necessarily be without GST as provision of the GST has been made in the Analysis of Rates of Items. Accordingly, it must be ensured that Rates of basic
elements to be entered in this "Basic Input Data Sheet" while updation of USSOR are exclusive of GST. Similarly hire - charges of plant & machinery shall also be exclusive of GST.
However hire Charges shall be inclusive of cost of services of operating staff, Cost of lubricating oil, fuel and other consumables for running the plant and machinery unless othewise
specified in the Description of the Basic Element.
2. For hire charges of plant machinery, per day means single shift of eight working hours.
SL Description Unit Rate Code Rate (₹)
415 Supply of Alumino Thermit Welding Portions, 3 piece prefabricated mould (ZIRCON WASHED) manully pressed, Each 0415 1,610.00
Single shot cricible fitted with auto tapping thimble as per RDSO Specification No IRST/19-2020 and as amended
for 60 Kg/90UTS-25mm gap with accessories as per Annexure -I of IRUSSOR - 2021.

416 Supply of Alumino Thermit Welding Portions, 3 piece prefabricated mould (ZIRCON WASHED) manully pressed, Each 0416 1,574.00
Single shot cricible fitted with auto tapping thimble as per RDSO Specification No IRST/19-2020 and as amended
for 52 Kg/90UTS-25mm gap with accessories as per Annexure -I of IRUSSOR - 2021.

417 Supply of Alumino Thermit Welding Portions, 3 piece prefabricated mould (ZIRCON WASHED) manully pressed, Each 0417 1,574.00
Single shot cricible fitted with auto tapping thimble as per RDSO Specification No IRST/19-2020 and as amended
for 60 Kg/60EI-R260 grade Rail-25mm gap with accessories as per Annexure -I of IRUSSOR - 2021.

418 Luting Sand for AT welding Kg 0418 10.00

419 Rail file 15" long for filing AT weld Each 0419 450.00
420 CP-3032 Powder for reconditioning of scabs, wheel burns of rails and cupped AT welded joints Kg 0420 1,550.00
421 TERRA C I-94 - Electrodes of make L & T, AdvaniOerlicon, Diffusion, SHARP - 650, or equivalent for Each 0421 175.00
reconditioning of MCI insert of points & crossings sleeper
422 H3 C Electrodes as per RDSO's Spec. no. IRS M:28-2011 Nos. 0422 78.13
423 H3 B Electrodes as per RDSO's Spec. no. IRS M:28-2011 Nos. 0423 76.50
424 H3 Electrodes as per RDSO's Spec. no. IRS M:28-2011 Nos. 0424 20.00
425 1.6mm dia core flux wire of cast manganese steel Kg 0425 916.00
426 10 mm thick Grooved Rubber Pads as per drg. No. RDSO/T-5199 & RDSO's Spec. no. IRS-T-47-2006 (Prov.)- Each 0426 132.00
1989
427 Galvanised steel fittings for non insulated galvanized channel sleepers (52/60 kg rail) as per RDSO drawing no. set 0427 1,534.00
RDSO/T-5197 to 5200
428 Galvanised steel fittings for insulated galvanized channel sleepers (52/60 kg rail) as per RDSO drawing no. set 0428 2,000.00
RDSO/T-5155 to 5164
429 Supply of 25/30 mm thick Elastomeric Pad as per RDSO drawing No. B/1636/I/R2 Each 0429 152.00
430 Supply of 2 nos. Elastomeric Pad 25mm/30mm and 4 nos. Grooved Rubber Pad as per RDSO drawing No. Set 0430 1,650.00
B/1636/5/Alt 2
431 Galvanised MS Inner and Outer Clip for steel channel sleeper (RDSO Drg. No. T-6150 & T-6151) Set 0431 434.00
432 Single Coil spring washers T-10773 Each 0432 4.35
433 Dip Galvanisation @ 705gm / sqm ( 100 Microns thick ) MT 0433 17,000.00
434 Hook Bolts 28mm dia & 320mm long as per RDSO's drg. No. BA-1636/I/R2 (Nuts, Bolts, washer, Split pins etc.) Kg 0434 65.00

435 Zero toe load galvanised fixtures for H Beam sleepers of 52/60kg Rails as per RDSO approved drawing Set 0435 3,000.00
436 Lifting Barrier assembly for 6m long Lifting Barrier, having fragmented boom, boom light boxes with suitable gate set 0436 96,858.59
lamps, bell, Boom supports (stay wires) with adjusters, counter weight, pedestal and lock posts with foundation
of ‘A’ type as required, turn union wheel with brackets, balance and auxiliary weights clamps etc to approved
standard drawings with all fittings and fastenings complete (excluding fringes)

437 Lifting Barrier assembly for 8m long Lifting Barrier, having fragmented boom, boom light boxes with suitable gate set 0437 129,144.47
lamps, bell, Boom supports (stay wires) with adjusters, counter weight, pedestal and lock posts with foundation
of ‘A’ type as required, turn union wheel with brackets, balance and auxiliary weights clamps etc to approved
standard drawings with all fittings and fastenings complete (excluding fringes)

438 Lifting Barrier assembly for 10m long Lifting Barrier, having fragmented boom, boom light boxes with suitable set 0438 161,431.29
gate lamps, bell, Boom supports (stay wires) with adjusters, counter weight, pedestal and lock posts with
foundation of ‘A’ type as required, turn union wheel with brackets, balance and auxiliary weights clamps etc to
approved standard drawings with all fittings and fastenings complete (excluding fringes)

439 Winch arrangement for operation of level crossing lifting barriers, as per RDSO’s approved layout having Each 0439 35,289.90
standard covering arrangement, foundation of ‘A’ type as required and pulleys, pulley guides and stakes,
horizontal rope wheel, vertical rope wheel, wire adjusting screws wire ropes 6x6x19 with all fittings, fixtures and
accessories to RDSO’s approved drawings with all parts including painting of steel work as per
specification(excluding excavation and concrete work)

Note: The figures given in Amount/Rate Column (Which are strikethrough) are not to be taken for estimation or justifying rate. This amount/rate has been given for
illustration purpose only.
13
IR Unified Standard Schedule of Rates - 2021 Basic Rate Sheet

(Rates of the Basic Elements are without GST)

1. Rates of Basic Element shall necessarily be without GST as provision of the GST has been made in the Analysis of Rates of Items. Accordingly, it must be ensured that Rates of basic
elements to be entered in this "Basic Input Data Sheet" while updation of USSOR are exclusive of GST. Similarly hire - charges of plant & machinery shall also be exclusive of GST.
However hire Charges shall be inclusive of cost of services of operating staff, Cost of lubricating oil, fuel and other consumables for running the plant and machinery unless othewise
specified in the Description of the Basic Element.
2. For hire charges of plant machinery, per day means single shift of eight working hours.
SL Description Unit Rate Code Rate (₹)
440 Auto boom locking arrangement (Single lever) for existing lifting barriers, consisting of interlocking ground frame Each 0440 82,481.50
near gate lodge, foundation of ‘A’ type as required and connecting ground frame to lock posts of gate booms with
stipulated rodding on guide rollers, supported on trestles as per RDSO’s drawings complete (Excluding
excavation, concrete work)

441 Auto boom locking arrangement (Double lever) for existing lifting barriers, consisting of interlocking ground frame Each 0441 85,105.91
near gate lodge, foundation of ‘A’ type as required and connecting ground frame to lock posts of gate booms with
stipulated rodding on guide rollers, supported on trestles as per RDSO’s drawings complete (Excluding
excavation, concrete work)

442 Gate lamps Each 0442 4,035.00

443 GI wire rope of 6mm dia. 6 ply to suit lifting barrier gates Kg 0443 350.00
444 Boom Supports (stay wires) for lifting barrier (approx. 8mm dia) Each 0444 1,000.00
445 4" dia round ceramic Light Reflector as per specification Each 0445 350.00
446 Pulley with Pulley stakes complete, wire rope 6x6x19 ply with accessories as per Railway’s approved drawings Each 0446 347.00
for operation of lifting barriers
447 Vertical / Horizontal Turnout Wheels and Shafts mounted over the base plate weighing not less than 6 Kg with Each 0447 1,320.00
supporting vertical base made of MS angles 75mm x 75mm x 10mm as per Railway's approved drawing and
specifications
448 Turnout wheel- HORIZONTAL ROPE WHEEL double wire (2 way) including guides Each 0448 2,024.00
449 Galvanized STEEL WIRE ROPE for DW signalling 6 x 19 ply as per IRS No. S.11 amended upto date for lifting Kg 0449 250.00
barrier at level crossing gates
450 Precast CC Paver block -80mm thick M35 grade Sqm 0450 495.00
451 Precast CC Paver block -120mm thick M40 grade Sqm 0451 774.00
452 HDPE Dowels Each 0452 100.00
453 High Speed Hacksaw Blade of size 300mm x 12.5mm x 0.63mm (18TPI) as per as per RDSO's Spec. no. Each 0453 160.00
TM/SM/26 (latest Rev.)
454 Hack Saw Blades Each 0454 593.22
455 Abrasive rail cutting disc as per RDSO's Spec. no. TM/SM/2 Each 0455 574.00
456 Driving belt (abrasive rail cutter) Each 0456 600.00
457 Grinding Stone wheel GQ6 of 150mm dia Nos. 0457 490.00
458 Shearing Blade for weld trimming machine Each 0458 150.00
459 Rechargeable Battery for ETLMD as per RDSO's Spec. no. TM/SM/ETLMD/218 Each 0459 1,000.00
460 Drill twist made of high speed of size 16 mm dia of Addison / I.T. make Each 0460 1,631.50
461 Drill twist made of high speed of size 7.2 mm dia of Addison / I.T. make Each 0461 271.00
462 Drill twist made of high speed steel for size 26.5mm dia of Addison / I T make Each 0462 2,852.30
463 Drill twist made of high speed steel for size 18mm dia of Addison / I T make Each 0463 1,866.40
464 Drill twist made of high speed steel for size 28.75 mm dia of Addison / I T make Each 0464 3,242.40
465 Drill twist made of high speed steel for size 31.75 mm dia of Addison / I T make Each 0465 4,335.90
466 Drill Bit (32 mm & 26.5 mm dia) Each 0466 300.00
467 Auger Carpenter Each 0467 90.00
468 Hand lever box full set BG Each 0468 11,000.00
469 Point lock pin full set BG Each 0469 720.00
470 Fosroc conbextra-GP2 grout or similar make in 25 Kg bag Each 0470 494.00
471 Black Oil (used lubricating oil) Litre 0471 15.00
472 High intensity retro-reflective sheet Sqm 0472 1,625.00
473 Retro Reflective tape 50mm wide Metre 0473 71.30
474 Steel wires released from U/S PSC Sleeper Kg 0474 25.00
475 Bamboo 50 mm dia 2.5 metre long (1 Score = 20 nos.) score 0475 1,500.00
476 Hollock Ballies 80mm diameter Metre 0476 85.00
477 Hollock Ballies 150mm diameter Metre 0477 150.00
478 150 mm dia Eucalyptus Ballies Metre 0478 143.75
479 125 mm dia ballies of locally available hard wood Metre 0479 90.00
480 100 mm dia ballies of locally available hard wood Metre 0480 65.00
481 Iron spike (different sizes) Kg 0481 60.00
482 Nylon rope 5 mm dia Kg 0482 90.00
483 Weedicide Chemical - Glyphosate Litre 0483 296.90
484 Fluorescent Tube Lights 40 Watt Nos. 0484 45.00
485 Hard Wood Peg of 50mm dia & 60 cm long Each 0485 25.00

Note: The figures given in Amount/Rate Column (Which are strikethrough) are not to be taken for estimation or justifying rate. This amount/rate has been given for
illustration purpose only.
14
IR Unified Standard Schedule of Rates - 2021 Basic Rate Sheet

(Rates of the Basic Elements are without GST)

1. Rates of Basic Element shall necessarily be without GST as provision of the GST has been made in the Analysis of Rates of Items. Accordingly, it must be ensured that Rates of basic
elements to be entered in this "Basic Input Data Sheet" while updation of USSOR are exclusive of GST. Similarly hire - charges of plant & machinery shall also be exclusive of GST.
However hire Charges shall be inclusive of cost of services of operating staff, Cost of lubricating oil, fuel and other consumables for running the plant and machinery unless othewise
specified in the Description of the Basic Element.
2. For hire charges of plant machinery, per day means single shift of eight working hours.
SL Description Unit Rate Code Rate (₹)
486 Liquid solution in 250ml pack, having break loose torque of 400Nm to 540Nm, as per ISO:10123 norms with Each 0486 2,500.00
shear strength of liquid solutions as 25 to 35 N/mm2, viscosity 1500 to 3000 (Centipoise) & specific gravity of 1.1
± 0.05. for tightening of all types of track nuts & bolts to prevent loosening during vibrations

487 Poly chloroprene rubber based solvent (toluene free) to prevent working out of rubber pads Kg 0487 2,000.00
488 U pin of 6mm dia mild steel of 0.3m length for stone cladding work Each 0488 14.00
489 Cotton Jute Kg 0489 40.00
490 Empty cement bag polythene 50 Kgs capacity Each 0490 5.00
491 Sand Paper medium-grit (100- to 150-grit), 9" x 11" Nos. 0491 5.00
492 Poly propylene tarred rope gabion fabricated from 9mm dia rope 100m x 100m mesh with partition at every 1m Cum 0492 1,380.00
interval
493 Precast Concrete bridge No. plaque/Stone Each 0493 287.50
494 Precast Concrete bridge foundation details plaque including engraving complete Each 0494 525.00
495 PVC pipe 25 mm dia confirming to IS standard for Electric Wiring Metre 0495 75.00
496 PVC junction boxes 4 way for Electric Work Each 0496 18.99
497 Tracing paper in roll with specification- weight 95gm/m2 width 914mm and length 45.7m Each 0497 250.00
498 Ammonia Print Sheet of 55 to 60 GSM, 914mm wide and 10m long Each 0498 250.00
499 Hire Charges of Total Station instrument Day 0499 200.00
500 Electricity Charges ( 1 Unit ) KWH 0500 7.50
Linked/Fixed Rates, not to be touched
501 Hire Charges of Crawler mounted 3D Hydraulic Excavator 148 HP (0.9 Cum Bucket Capacity) Day 0501 10,213.40
502 Hire Charges of Crawler mounted Hydraulic Excavator 200 HP (2.5 cum bucket) Day 0502 14,405.40
503 Hire Charges of Wheel loader 3.1 Cum bucket capacity 165 HP (without POL) Day 0503 4,173.00
504 Hire charges of Motor grader (3.67 metre blade) Day 0504 18,031.80
505 Hire charges of dozer 166 HP capacity Day 0505 17,336.20
506 Hire Charges of JCB 3DX Plus Backhoe Loader Day 0506 4,674.20
507 Hire Charges of 20T truck with long trailers (without POL) Day 0507 2,903.00
508 Hire charges of Diesel Truck - 9 tonne Day 0508 3,649.40
509 Hire and running charges of Tipper 12 Cum Capacity Day 0509 6,094.05
510 Hire and running charges of Tipper 12 Cum Capacity (without POL) Day 0510 2,191.80
511 Hire Charges of Truck - 9 tonne (without POL ) Day 0511 1,379.00
512 Hire Charges of 1.5 tonne Pickup Truck (without POL ) Day 0512 1,023.40
513 Sundries Lumpsum 9901 1.00
514 Add for Water Charges @ 1% Lumpsum 9902 0.01
515 Add for GST @ 12% (multiplying factor 0.1405) Lumpsum 9903 0.14
516 Add for Contractor’s Overheads and Profit @ 15% Lumpsum 9904 0.15
517 Add for Cess @ 1% Lumpsum 9905 0.01
518 Add for working under traffic block @ 5% Lumpsum 9991 0.05
519 Add for working under traffic block @ 10% Lumpsum 9992 0.10
520 Add for working under traffic block @ 15% Lumpsum 9993 0.15
521 Add for working under traffic block @ 20% Lumpsum 9994 0.20
522 Add for working under traffic block @ 25% Lumpsum 9995 0.25

Note: The figures given in Amount/Rate Column (Which are strikethrough) are not to be taken for estimation or justifying rate. This amount/rate has been given for
illustration purpose only.
15