Components of a Control System Dr. Parth S.

Thakar
(ECE, PDEU)

Some terminology:
I the plant is the system being controlled
I the sensors measure the quantity that is subject to control
I the actuators act on the plant
I the controller processes the sensor signals and drives the
actuators
I the control law is the rule for mapping sensor signals to
actuator signals

Slides courtesy : Prof. Daniel Liberzon and Prof. Richard Murray

From Left: With Prof. Daniel Liberzon (UIUC), Prof. Richard Murray (Caltech) and Prof. M. Vidyasagar (IITH)

@ IEEE Indian Control Conference, Mahindra Ecole Centrale, Hyderabad.

Feedback Control: Some History christicaygens et
*

force
-centrifugal
Gravitation
Own
theory of
-

1788: James Watt patents the centrifugal governor for C& Royal

controlling the speed of a steam engine. The governor combines society

↓
sensing, actuation, and control. Relation with Leibniz Newton
*

&Rene Descartes --

Huygens watt

The original governor kept the engine running at (more or less)

constant speed via what is known today as proportional control.
Many improvements were added to the original design.
f(n) g(n)
sin-1)g(
J. g(n) I

(i)
Feedback Control: Some History

1868: James Clerk Maxwell publishes the first theoretical study

of steam engine governors. By that time, there were more than
75,000 governors installed in England.
J.C. Maxwell, “On governors,” Proc. Royal
Society, no. 100, 1868
... [Stability of the governor] is mathematically
equivalent to the condition that all the possible
roots, and all the possible parts of the impossible
roots, of a certain equation shall be negative. ...
I have not been able completely to determine
these conditions for equations of a higher degree
than the third; but I hope that the subject will
obtain the attention of mathematicians.

The general stability criterion was found in 1876 by Edward

John Routh and, in an equivalent form, independently by Adolf
Hurwitz in 1895. We will study their criterion in ECE 486.
Feedback Control: Some History

Ever since the invention of the centrifugal governor, control

attracted the interest of engineers, mathematicians, physicists,
economists ...
In Russia, Ivan Vyshnegradsky developed stability criteria of
steam engine governors in 1876, independently of Maxwell. He
was a director of St. Petersburg Technological Institute
(1875–1878), and ended his career as a Minister of Finance of
the Russian Empire (1887–1892).
Some of the earliest textbooks on control:
I M. Tolle, Die Regelung der Kraftmaschinen, Berlin, 1905.
I N.E. Joukowski, The Theory of Regulating the Motion of
Machines, Moscow, 1909.
Industrial Process Control

Early development of controllers was driven by engineering

rather than theory. The e↵ects of integral and derivative action
were rediscovered by tinkering.

Some interesting facts:

I By mid-1930’s, there were more than 600 control
companies in the U.S.
I In 1931, Foxboro developed the Stabilog — the first *
general-purpose proportional-integral-derivative (PID)
controller, with adjustable gains from 0.7 to 100
I Between 1925 and 1935, about 75,000 controllers were sold
in the U.S.

– K.J. Åström and P.R. Kumar, “Control: a perspective,” Automatica, 2014

IEEE contral System

S.
*
Bennet,"Developmentof PID controllers",
Magazine,
1993.
Insights from Flight Control
1905: Orville and Wilbur Wright made the first successful
experiment with manned flight.

Their main insight was that the airplane itself had to be

inherently unstable, which would give the pilot more control
and render the overall flying system (pilot and machine) stable.
* The first autopilot was developed by Sperry Corp. in 1912.
A
suce: Wikipedia.
The Benefits of Negative Feedback: The Op Amp
1927: Harold S. Black of Bell Labs developed negative feedback
IEEE TRANSACTIONS ON AUTOMATTC CONTROL, VOL. AC-29, NO. 8, AUGUST 1984

amplifier to reduce signal distortion in long-distance telephony.

In Memoriam
I suddenly realized that if I fed the amplifier
output back to the input, in reverse phase,
and kept the device from oscillating ..., I
would have exactly what I wanted: a means
of canceling out the distortion in the output.
... By building an amplifier whose gain is
deliberately made ... higher than necessary
and then feeding the output back on the input
in such a way as to throw away the excess
gain, it had been found possible to e↵ect
extraordinary improvement in constancy of Harold Stephen Black
amplification and freedom from non-linearity. (1898-1 983)

Curious fact: it took nine years

H AROLD (!) S. forBlack wasBlack’s patent
born in Leominster, MA, to
in 1898. He U S . andbe
British Patent Offices. Black’s ow
died December 11, 1983. He received the B.S.E.E. and the events leading to his great invention [l] is a
D.Eng. degrees from the Worcester Polytechnic Institute 1921 of important lessons, which should be r
granted because the patent officers refused
and 1955, respectively. to1921believe
He worked from to 1925 for the that After
engineer. the in
strugghg several years w
Western Electric Company, Inc., as a member of the Engineering distortion reduction-a lot of work which in
Department. His starting salary was $32 a week for a six day and many experiments-one Saturday mo
amplifier could work. week. From 1925 his retirement in 1963 he was a member of work, the idea struck him as he was ridin
to
the Technical Staff of Bell Telephone Laboratories. From 1963 to going to Manhattan and the only paper he h
1966 he was Principal Research Scientist at General Precision New York Times. So he drew his diagrams o
Inc. After 1966 he was a Communications Consultant. Black’s professional life centered on the p
Control at Bell Labs: Frequency-Domain Methods

The invention of the op amp spurred on further developments

in the theory and practice of feedback control:
I 1932 — Harry Nyquist studied how sinusoidal signals
propagate around the control loop and developed the
Nyquist stability criterion "Bode
*

I 1934 — Hendrik Bode studied the relationship between Lectures

Prize"
attenuation and phase (leading to the concepts of phase
(19EE
and gain margins); identified fundamental limitations of (55)
feedback control (Bode’s sensitivity theorem); and
developed graphical methods (Bode plots) for designing
feedback controllers (loop shaping)

We will cover this material in the 2nd half of the semester.

Feedback Control after 1940
Further developments in control systems were a direct result of
World War II ...
I fire control (anti-aircraft, ships, automated aiming ...)
I ballistics and guidance systems (autopilot, gyro compass ...)
... and the Cold War:
I unmanned and manned space flight
I control with humans in the loop (Norbert Wiener’s
cybernetics)
I communication networks ...

The aerospace industry was at the forefront of control

technology because of extreme demands for safety and
performance. It was one of the early adopters of state-space
methods, e.g., the use of Kalman filter for navigation in the
Apollo Project.
⑪

N
↳
Control: The Hidden Technology
These days, control systems are everywhere:
I home comfort (Roomba, thermostats, smart homes, ...)
I communication networks (routing, congestion control, ...)
I automotive and aerospace industry (safety-critical systems,
autopilots, cruise control, autonomous vehicles, ...)
I biology and medicine (cardiac assist devices, anesthesia
delivery, systems biology ...)
I the arts ( dynamic works of Ra↵aello D’Andrea )

... but the basic analysis and design techniques are still the
same as in the early days:
I block diagrams (flow of information)
I Laplace transforms and transfer functions
I graphical techniques: root locus, Bode and Nyquist plots
I state-space methods (linear algebra)
Feedback Control in Five Minutes
D1 D2
+ E U + +
R C + P + Y

Variables:
Systems: R – reference
C – controller E – error
(or compensator) D1 , D2 – disturbances
P – plant U – control (or input)
Y – output
Key relations:

Y = D2 + P (U + D1 ) U = CE E=R Y
Feedback Control in Five Minutes
D1 D2
+ E U + +
R C + P + Y

Y = D2 + P (U + D1 ) U = CE E=R Y

Let’s express Y in terms of R, D1 , D2 :

Y = D2 + P (CE + D1 )
⇣ ⌘
= D2 + P C(R Y ) + D1 negative feedback!!

= D2 + P CR P CY + P D1

PC P 1
Y = R+ D1 + D2
1 + PC 1 + PC 1 + PC
Feedback Control in Five Minutes
D1 D2
+ E U + +
R C + P + Y

PC P 1
Y = R+ D1 + D2
1 + PC 1 + PC 1 + PC
Y (=ouput)
Suppose C is a large positive gain. What happens as C ! 1? to
PC C!1
R !R reference tracking
1 + PC
P 1 C!1
D1 + D2 !0 disturbance rejection
1 + PC 1 + PC
his gives Robustness"of the controller
the

W.r. E.

Bottom line: in the limit C ! 1, Y = R disturbances.

(this “Big Picture” is too good to be true — we will fill in all the details!!)
For the Next Few Lectures ...

... start reviewing:

I complex numbers
I di↵erential equations
I Laplace transforms