Product data sheet 1/2

SITEC® Rivet blind rivet nuts with plastic

moulding
Brass | Flat head | Cylindrical | Open | with washer

Note: SITEC® Rivet inner thread is produced according to standard tolerances (6H,
acocrding to ISO 68-1).

Technical information can be found on the last page.

Diameter Article number Drilling diameter d E L2 e Length (l)

(d) nominal size max. B nominal size min. max. nominal size
M4 24310040300 10.3 10.5 15 3.7 9 0.5 3 17.7
M5 24310050300 10.3 10.5 15 3.7 9 0.5 3 17.7
M6 24310060300 13 13.2 18 4.3 10 0.5 3 19.3
All technical data refer to the measure mm

Böllhoff Group · Archimedesstr. 1-4 · 33649 Bielefeld · Phone: +49 521 4482-1387 · [email protected] · eshop.boellhoff.de/en/home
This document was generated automatically. Subject to technical changes and errors. Distribution as well as duplication of this document, its utilisation and
communication of its content only permitted with express consert.
nformation Product data sheet 2/2

>
<>

<
< >
d L B
(mm) (mm) (mm)

Head diameter
Overall length
Thread size
> <

Ø H
e (min - max)
(mm) (mm) (mm)

Grip range Hole geometry

Defines the range of total thickness of the customers If round –> diameter
part (even if it consists of more than one layer) If hexagonal –> wigth across flats

< S << L2 < < E max <

(mm) (mm) (mm)

Head projection after setting

Variable according to the application (setting load, material substrate, etc.)

Blind side projection after installation

Defines the clearance needed on the blind side (cannot be used for quality
control)
Setting stroke
Difference of total length before and after installation

RIVKLE® Nut RIVKLE® Stud

All technical data refer to the measure mm

RIVKLE®
Mandrel*
Customers part
Anvil*
Counter nut
Setting tool

*in accordance to chosen RIVKLE®*

Böllhoff Group · Archimedesstr. 1-4 · 33649 Bielefeld · Phone: +49 521 4482-1387 · [email protected] · eshop.boellhoff.de/en/home
Böllhoff Group
This document was generated automatically. Subject to technical changes and errors. Distribution as well as duplication of this document, its utilisation and
nge. Reprinting, even in extract form, only permitted Please find your local contact on www.boellhoff.com
communication of its content only permitted with express consert.
bserve protective note according to ISO 16016. or contact us under [email protected]