Apl 3
Apl 3
INSTALLATION INSTRUCTIONS
Date: 28/05/2013 Version A1
APL3
Installation instructions
REGISTERED 44, av. Lucien Victor Meunier – 33530 BASSENS - FRANCE Page : 1/26
OFFICE Tel. +33 5 57 80 80 80 – Fax +33 5 56 31 61 21 – www.lafon.fr
Reference: 17682751
INSTALLATION INSTRUCTIONS
Date: 28/05/2013 Version A1
UPDATE SUMMARY
Version Pages changes Modification designation Date
A All Creation 20/03/13
A1 22… Commercial options 28/05/13
REGISTERED 44, av. Lucien Victor Meunier – 33530 BASSENS - FRANCE Page : 2/26
OFFICE Tel. +33 5 57 80 80 80 – Fax +33 5 56 31 61 21 – www.lafon.fr
Reference: 17682751
INSTALLATION INSTRUCTIONS
Date: 28/05/2013 Version A1
CONTENTS
REGISTERED 44, av. Lucien Victor Meunier – 33530 BASSENS - FRANCE Page : 3/26
OFFICE Tel. +33 5 57 80 80 80 – Fax +33 5 56 31 61 21 – www.lafon.fr
Reference: 17682751
INSTALLATION INSTRUCTIONS
Date: 28/05/2013 Version A1
GENERAL
I. TECHNICAL DESCRIPTION
1. The unit
Luxmètre
Light meter
Ecran
8.4”tactile
touch8.4''
screen
Lecteur de codes
Barcode readerbarres
Lecteur de cartes
Card reader
Lecteur
RFIDRFID
reader
Sortie ticketdispenser
Ticket
Porte générique
Generic housing
JointSeal
d'étanchéité
Serrure
Four quart de tour
turn lock
Terminal
RailPrinter
imprimante
rail
Charnières
Generic porte générique
housing hinges
REGISTERED 44, av. Lucien Victor Meunier – 33530 BASSENS - FRANCE Page : 4/26
OFFICE Tel. +33 5 57 80 80 80 – Fax +33 5 56 31 61 21 – www.lafon.fr
Reference: 17682751
INSTALLATION INSTRUCTIONS
Date: 28/05/2013 Version A1
2. Dimensions
REGISTERED 44, av. Lucien Victor Meunier – 33530 BASSENS - FRANCE Page : 5/26
OFFICE Tel. +33 5 57 80 80 80 – Fax +33 5 56 31 61 21 – www.lafon.fr
Reference: 17682751
INSTALLATION INSTRUCTIONS
Date: 28/05/2013 Version A1
Printer A specifications:
REGISTERED 44, av. Lucien Victor Meunier – 33530 BASSENS - FRANCE Page : 6/26
OFFICE Tel. +33 5 57 80 80 80 – Fax +33 5 56 31 61 21 – www.lafon.fr
Reference: 17682751
INSTALLATION INSTRUCTIONS
Date: 28/05/2013 Version A1
Printer B specifications:
- Resolution: 8 dots/mm
REGISTERED 44, av. Lucien Victor Meunier – 33530 BASSENS - FRANCE Page : 7/26
OFFICE Tel. +33 5 57 80 80 80 – Fax +33 5 56 31 61 21 – www.lafon.fr
Reference: 17682751
INSTALLATION INSTRUCTIONS
Date: 28/05/2013 Version A1
II. WARNINGS
1. Safety advice
Do not use a flame or heat source within the service station perimeter.
Fuel is a harmful product. Avoid inhaling fuel and any contact with skin or
eyes.
If any part of the body, eyes or clothing comes into contact with fuel, rinse
immediately with copious amounts of water.
REGISTERED 44, av. Lucien Victor Meunier – 33530 BASSENS - FRANCE Page : 8/26
OFFICE Tel. +33 5 57 80 80 80 – Fax +33 5 56 31 61 21 – www.lafon.fr
Reference: 17682751
INSTALLATION INSTRUCTIONS
Date: 28/05/2013 Version A1
Facade terminal
Display casing
Caisson afficheur
Terminal facade
Caissoncasing
Display afficheur
Façade péripherique
Peripheral facade IP 54 cable
Support passage de câble
50
passage support
IP 54
50
cloison
.
hydraulique
IP23 hydraulic
IP23
partition
Terminal facade
Façade terminal
Peripheral
Façadefacade
péripherique
Façade péripherique
Peripheral facade 200
Terminal facade
Façade terminal
REGISTERED 44, av. Lucien Victor Meunier – 33530 BASSENS - FRANCE Page : 9/26
OFFICE Tel. +33 5 57 80 80 80 – Fax +33 5 56 31 61 21 – www.lafon.fr
Reference: 17682751
INSTALLATION INSTRUCTIONS
Date: 28/05/2013 Version A1
REGISTERED 44, av. Lucien Victor Meunier – 33530 BASSENS - FRANCE Page : 10/26
OFFICE Tel. +33 5 57 80 80 80 – Fax +33 5 56 31 61 21 – www.lafon.fr
Reference: 17682751
INSTALLATION INSTRUCTIONS
Date: 28/05/2013 Version A1
The automatic unit on a generic housing is fitted in the same way to each of these four elements.
All that is required is for the hinges to be fitted using four M6 x 8 screws in the oblong holes intended for
this use.
Generic
Porte housing
générique
Four M6 x 84screws
Vis M6x8 Charnières porte générique
Generic housing hinges
Fixingde
Points points
fixation
REGISTERED 44, av. Lucien Victor Meunier – 33530 BASSENS - FRANCE Page : 11/26
OFFICE Tel. +33 5 57 80 80 80 – Fax +33 5 56 31 61 21 – www.lafon.fr
Reference: 17682751
INSTALLATION INSTRUCTIONS
Date: 28/05/2013 Version A1
Glissières
Sliders Fix each slider to the
base plate using four M5 x
Four M5 x 12 countersunk
4 Vis head screws
M5x12 tête fraisée 12 countersunk head screws
and four M5 nuts.
The oblong holes on the
base plate allow the depth
Plateau
Base plate
to be adjusted more
accurately.
There are two sliders per
side.
Four M5M5
4 écrous nuts
4 Visscrews
Four M8 headless sans tête M8
REGISTERED 44, av. Lucien Victor Meunier – 33530 BASSENS - FRANCE Page : 12/26
OFFICE Tel. +33 5 57 80 80 80 – Fax +33 5 56 31 61 21 – www.lafon.fr
Reference: 17682751
INSTALLATION INSTRUCTIONS
Date: 28/05/2013 Version A1
Third stage: Fitting the automatic unit on Q5xx housing to the sliders
4 Four
Vis M6
M6Tête fraisée head screws
countersunk
Glissières
Sliders
Porte QXX
QXX port
Retour caisson
Case flange
Position the interface by suspending
it on the casing flange using its
supports.
4Four
Goujons M6 pins
M6 socket
REGISTERED 44, av. Lucien Victor Meunier – 33530 BASSENS - FRANCE Page : 13/26
OFFICE Tel. +33 5 57 80 80 80 – Fax +33 5 56 31 61 21 – www.lafon.fr
Reference: 17682751
INSTALLATION INSTRUCTIONS
Date: 28/05/2013 Version A1
Ecrou
M6 papillonnut
butterfly et rondelles M6
and washer
Traverse droite
Right cross-member
Fix the two cross-members (left and right) from the interior of the casing using the interface's M6
socket pins with nuts and washers (one smooth washer and one serrated washer)
The interface is ready for the automation units to be fitted. (see A)
REGISTERED 44, av. Lucien Victor Meunier – 33530 BASSENS - FRANCE Page : 14/26
OFFICE Tel. +33 5 57 80 80 80 – Fax +33 5 56 31 61 21 – www.lafon.fr
Reference: 17682751
INSTALLATION INSTRUCTIONS
Date: 28/05/2013 Version A1
Keyclés
Trous holes
Cable passage
Passage de câble
Lame
Air bladed'air
in position
Vis screws
M5 M5
en position
Picots de positionnement
Positioning spurs
Lame d'air
Air blade Lame d'air
Air blade
The blades are positioned between the casing and hydraulic part of the distributor.
They are slid under the casing until they clip onto the positioning spurs.
The blade is then fixed in position from the interior of the casing using two CHC M5 screws.
REGISTERED 44, av. Lucien Victor Meunier – 33530 BASSENS - FRANCE Page : 15/26
OFFICE Tel. +33 5 57 80 80 80 – Fax +33 5 56 31 61 21 – www.lafon.fr
Reference: 17682751
INSTALLATION INSTRUCTIONS
Date: 28/05/2013 Version A1
REGISTERED 44, av. Lucien Victor Meunier – 33530 BASSENS - FRANCE Page : 16/26
OFFICE Tel. +33 5 57 80 80 80 – Fax +33 5 56 31 61 21 – www.lafon.fr
Reference: 17682751
INSTALLATION INSTRUCTIONS
Date: 28/05/2013 Version A1
Second stage: Fixing the generic casing to the spacer.
The two cables (power supply and network) should first be passed through the gland boxes intended
for this purpose and attached to the casing.
The casing is fixed to the spacer using six CHC M8 screws.
These are partly pre-tightened in the inserts in the metal sheet.
The casing is then brought into position using the key holes and the screws fully tightened once it is in
position.
Vis M8
M8 screw Key clés
holes
Trous
Presses
Glandétoupe
box
The interface is ready for the automation units to be fitted. (see A).
REGISTERED 44, av. Lucien Victor Meunier – 33530 BASSENS - FRANCE Page : 17/26
OFFICE Tel. +33 5 57 80 80 80 – Fax +33 5 56 31 61 21 – www.lafon.fr
Reference: 17682751
INSTALLATION INSTRUCTIONS
Date: 28/05/2013 Version A1
380 8
R 9
108
90 200
VisnutM6
M6
Once the base is fixed to the
ground, the strengthener has to be
fitted (with the flange upwards) using
four M6 bolts.
Capot
Hood The cover is then slid vertically
along the base until it clips into the
strengthener.
It is fixed in position by four M6
screws.
Pied
Base
Ecrou
M6 nut M6
Renfort
Strengthener
REGISTERED 44, av. Lucien Victor Meunier – 33530 BASSENS - FRANCE Page : 18/26
OFFICE Tel. +33 5 57 80 80 80 – Fax +33 5 56 31 61 21 – www.lafon.fr
Reference: 17682751
INSTALLATION INSTRUCTIONS
Date: 28/05/2013 Version A1
The two cables (power supply and network) should first be passed through the gland boxes intended
for this purpose and attached to the casing.
The casing is fixed to the base using six CHC M8 screws.
These are partly pre-tightened in the inserts in the metal sheet.
The casing is then brought into position using the key holes and the screws fully tightened once it is in
position.
Trous
Key clé
holes
Vis screws
M8 M8
Presse
Gland étoupe
box
The interface is ready for the automation units to be fitted. (see A).
REGISTERED 44, av. Lucien Victor Meunier – 33530 BASSENS - FRANCE Page : 19/26
OFFICE Tel. +33 5 57 80 80 80 – Fax +33 5 56 31 61 21 – www.lafon.fr
Reference: 17682751
INSTALLATION INSTRUCTIONS
Date: 28/05/2013 Version A1
VII. CABLING
The following drawing should be used for cabling the APL3 and the different components of the ALIM
CHAUFFERETTE SWITCH APL3 kit:
17681580 SCHEMA CABLAGE CONNEXION ALIMENTATION APL3. (wiring diagram for connecting the
APL3 power supply)
To fix these different components: the heater and thermostat must be within the APL3 casing on the
existing pins so that the hot air is not blown directly onto the thermal paper.
However, if there is not enough space in the casing, the cables are long enough to permit the DIN rail
with the power supply and switch and the rail with the condensers to be installed in the distributor's head.
It is possible to fit the 24 V power supply flat or on its edge depending on the available space.
The APL3 uses a 230 V AC power supply and consumes a maximum of 204 W for 2 faces (maximum
current: 1.5 A).
Condensateurs
Condensers
Switch Alimentation
Power supply
Chaufferette
Heater
Hygrothermostat
Thermo Hygro Sensor
REGISTERED 44, av. Lucien Victor Meunier – 33530 BASSENS - FRANCE Page : 20/26
OFFICE Tel. +33 5 57 80 80 80 – Fax +33 5 56 31 61 21 – www.lafon.fr
Reference: 17682751
INSTALLATION INSTRUCTIONS
Date: 28/05/2013 Version A1
Point de fixation de
la tresse de masse
REGISTERED 44, av. Lucien Victor Meunier – 33530 BASSENS - FRANCE Page : 21/26
OFFICE Tel. +33 5 57 80 80 80 – Fax +33 5 56 31 61 21 – www.lafon.fr
Reference: 17682751
INSTALLATION INSTRUCTIONS
Date: 28/05/2013 Version A1
REGISTERED 44, av. Lucien Victor Meunier – 33530 BASSENS - FRANCE Page : 22/26
OFFICE Tel. +33 5 57 80 80 80 – Fax +33 5 56 31 61 21 – www.lafon.fr
Reference: 17682751
INSTALLATION INSTRUCTIONS
Date: 28/05/2013 Version A1
Point de Fixation
Fixing point on The door opening limitation device is
sur la porte
door fixed to the free part of the locking pin
between the two hinges on the generic
door on one side and to the free pin on the
interface or casing on the other side.
Fixing
Point point on
de Fixation
sur l'interface
interface
Chapeau
Genericcaisson
casing The cover is fixed using the holes
générique
top located on the top of the casing.
The adhesive film must be removed
Points
Casingdetop
fixation
fixing
first before positioning it on the top of
du chapeau the casing and tightening the nuts.
points
REGISTERED 44, av. Lucien Victor Meunier – 33530 BASSENS - FRANCE Page : 23/26
OFFICE Tel. +33 5 57 80 80 80 – Fax +33 5 56 31 61 21 – www.lafon.fr
Reference: 17682751
INSTALLATION INSTRUCTIONS
Date: 28/05/2013 Version A1
Pedestal
Pied
Pointsdefor
Points fixing
fixation
pedestal
du to raiser
pied au réhausseur
Points de fixation
Points for fixing
du rehausseur au sol
raiser to ground
Fixing points
Point de fixation
REGISTERED 44, av. Lucien Victor Meunier – 33530 BASSENS - FRANCE Page : 24/26
OFFICE Tel. +33 5 57 80 80 80 – Fax +33 5 56 31 61 21 – www.lafon.fr
Reference: 17682751
INSTALLATION INSTRUCTIONS
Date: 28/05/2013 Version A1
5. Barcode reader
Both readers are attached to the frame of the generic door using the two M4 pins intended for this
purpose.
Points
Fixingdepoints
fixation du
for
lecteur code barre
bar code reader
REGISTERED 44, av. Lucien Victor Meunier – 33530 BASSENS - FRANCE Page : 25/26
OFFICE Tel. +33 5 57 80 80 80 – Fax +33 5 56 31 61 21 – www.lafon.fr
Reference: 17682751
INSTALLATION INSTRUCTIONS
Date: 28/05/2013 Version A1
Pièce de jonction
Interface part The optional camera is fixed
to the interface using four
screws.
Cartecamera
Card Camera This is done by removing the
terminal's interface then
removing the luminous strip
and fitting the card camera.
It is fitted between the
interface and the strip.
The camera cable is
connected to the MJ20
Bandeau luxmètre
Luminous strip terminal.
REGISTERED 44, av. Lucien Victor Meunier – 33530 BASSENS - FRANCE Page : 26/26
OFFICE Tel. +33 5 57 80 80 80 – Fax +33 5 56 31 61 21 – www.lafon.fr