Rockwell Automation Application Content

IO-Link Device Library

Release Notes
IO-LinkDeviceLibrary_v2.1.00.zip

October 29th, 2021

 IO-Link Device Library

Important User Information

Solid-state equipment has operational characteristics differing from those of electromechanical equipment. Safety
Guidelines for the Application, Installation and Maintenance of Solid State Controls (publication SGI-1.1 available
fr om your local Rockwell Automation sales office or online at http ://literature.rockwellauto matio n.co m) describes
some important differences between solid-state equipment and hard-wired electromechanical devices. Because of
this difference, and because of the wide variety of uses for solid -state equipment, all persons responsible for
applying this equipment must satisfy themselves that each intended application of this equipment is acceptable.

In no event will Rockwell Automation, Inc. be responsible or liable for indirect or consequential damages resulting
f rom the use or application of this equipment.

The examples and diagrams in this manual are included solely for illustrative purposes. Because of the many
variables and requirements associated with any particular installation, Rockwell Automation, Inc. cannot assume
responsibility or liability for actual use based on the examples and diagrams.

No patent liability is assumed by Rockwell Automation, Inc. with respect to use of information, circuits, equipment,
or software described in this manual.

Reproduction of the contents of this manual, in whole or in part, without written permission of Rockwell Automation,
Inc., is prohibited.

Throughout this manual, when necessary, we use notes to make you aware of safety considerations.

Identifies information about practices or circumstances that can cause an explosion in a

hazardous environment, which may lead to personal injury or death, property damage, or
economic loss.

Identifies information that is critical for successful application and understanding of the product.

Identifies information about practices or circumstances or death, property damage, or

economic loss. Attentions avoid a hazard, and recognize the consequence.

Labels may be on or inside the equipment, that dangerous voltage may be present.

Labels may be on or inside the equipment, for example, a drive or motor, to alert people
that surfaces may reach dangerous temperatures.

Allen-Bradley, Rockwell Automation, and TechConnect are trademarks of Rockwell Automation, Inc.Trademarks not belonging to Rockwell Automation are property of their respective companies.

2
 IO-Link Device Library

Table of Contents
1 Introduction ............................................................................................................................................................................... 4
Description ........................................................................................................................................................................ 4
Purpose ..................................................................................................................................................................... 4
Prerequisites ..................................................................................................................................................................... 4

2 IO-Link Device Library Files ...................................................................................................................................................... 5

General_Documents ......................................................................................................................................................... 5
IOLinkDeviceObjects ......................................................................................................................................................... 5
Ref erenc eManuals ............................................................................................................................................................ 9

3 Revision Changes ................................................................................................................................................................... 10

Revision 2.0.00 ............................................................................................................................................................... 10
Revision 2.1.00...............................................................................................................................................................................11

4 More Information ..................................................................................................................................................................... 12

3
 IO-Link Device Library

1 Introduction

Description
The IO-Link Device Library is a tested, documented and lif e cycle managed object library providing
preconfigured status and diagnostic faceplates sets for Rockwell Automation IO-Link Master and IO-Link
Sensor devices. The Device Objects may be used with Machine Builder, Process, and Packaged Libraries or
as standalone components.

Purpose

The purpose of this document is to provide version information and update information on the IO-Link Device
Library f iles provided in the zip f ile available for download f rom the Product Compatibility and Download Center
(PCDC) f rom Rockwell Automation® web page.
http ://co mp atibility.ro ckwellauto matio n.com/Pag es/ho me.aspx

Search for Application Content and then select the IO-Link Device Library

Download and extract the IO-Link DeviceLibrary_v2.1.00.zip f ile

Once extracted, you may browse the contents.

Folder Contents
GeneralDocuments Release Notes (*.pdf)

IOLinkDeviceObjects Device Name subfolders with the following files:

How To Import and Configure Device Object into Logix Designer, View Designer and
Machine Edition Video (.mp4)
Device Faceplate Operational Overview Video (.mp4)
Device AOI Rung Import File (.L5X)
View Designer Project (.vpd)
FTView Machine Edition File (.gfx)
FTView Machine Edition Images within ME_Images Folder (.png)
ReferenceManuals Reference Manuals for each device.

Prerequisites

• Studio 5000 - Logix Designer

o v30.01.00, v31.00.00, v32.00.00, v33.00.00
• Studio 5000 – View Designer
o v4.03.00, v5.01.00, v5.02.00,v6.01.00,v7.02.00
• FactoryTalk View Studio
o V10.00.00, 11.00.00, V12.00.00

4
 IO-Link Device Library

2 IO-Link Device Library Files

General Documents
File Name Current Version
IO-LinkDeviceLibrary_ReleaseNotes_v2.1.00.pdf October 29th,2021

IOLinkDeviceObjects
Studio Studio
5000 5000
FactoryTalk
Logix View
Object Name Files Version View Studio
Designer Designer
Version Version Version

raC_Dvc_4IOLMaster_Rung.L5X 2.0.00 30.01.00

How_To_Import_and_Configure_4IOL_Master_ 31.00.00
1.1.00 32.00.00
Objects_in_LogixDesigner.mp4
raC_Dvc_Master4IOL_FP.vpd 2.0.00
How_To_Import_and_Configure_4IOL_Master_ 4.03.00
1.0.00
Object s_in_ViewDesigner.mp4 5.01.00
raC_Dvc_4IOL_
Master Operational_Overview_of_4IOL_Master_Faceplates_i
2.0.00
n_ViewDesigner.mp4
(raC-ME) raC_Dvc_Master4IOL-Faceplate.gfx 2.0.00
How_To_Import_and_Configure_4IOL_Master_
1.0.00 10.00.00
Objects_in_FTViewME.mp4
11.00.00
Operational_Overview_of_4IOL_Master_Faceplates
2.0.00
_in _FTViewME.mp4
raC_Dvc_8IOLMaster_Rung.L5X 2.0.00 30.01.00
31.00.00
How_To_Import_and_Configure_8IOL_Master_
1.1.00 32.00.00
Objects_in_LogixDesigner.mp4
raC_Dvc_Master8IOL_FP.vpd 2.0.00
How_To_Import_and_Configure_8IOL_Master_ 4.03.00
1.0.00
raC_Dvc_8IOL_ Object s_in_ViewDesigner.mp4 5.01.00
Master Operational_Overview_of_8IOL_Master_Faceplates_
2.0.00
in_ViewDesigner.mp4
(raC-ME) raC_Dvc_Master8IOL-Faceplate.gfx 2.0.00
How_To_Import_and_Configure_8IOL_Master_ 1.1.00 10.00.00
Object s_in_FTViewME.mp4 11.00.00
Operational_Overview_of_8IOL_Master_Faceplates_
2.0.00
in_FTViewME.mp4
raC_Dvc_42EF_4IOL_Rung.L5X
2.0.00 30.01.00
raC_Dvc_42EF_8IOL_Rung.L5X
31.00.00
How_To_Import_and_Configure_42EF_Objects_ 32.00.00
1.1.00
in_LogixDesigner.mp4
raC_Dvc_42EF raC_Dvc_42EF_FP.vpd 1.1.00
How_To_Import_and_Configure_42EF_Objects_
4.03.00
in_ViewDesigner.mp4
1.0.00 5.01.00
Operational_Overview_of_42EF_Faceplates_in_View
Designer.mp4

5
 IO-Link Device Library

Studio Studio
5000 5000
FactoryTalk
Logix View
Object Name Files Version View Studio
Designer Designer
Version Version Version

(raC-ME) raC_Dvc_42EF-Faceplate.gfx
How_To_Import_and_Configure_42EF_Objects_in_ 1.1.00
_FT ViewME.mp4 10.00.00
11.00.00
Operational_Overview_of_42EF_Faceplates_in_
1.0.00
FTViewME.mp4
raC_Dvc_836P_4IOL_Rung.L5X
2.0.00 30.01.00
raC_Dvc_836P_8IOL_Rung.L5X
31.00.00
How_To_Import_and_Configure_836P_Objects_ 32.00.00
1.1.00
In_LogixDesigner.mp4
raC_Dvc_836P_FP.vpd
How_To_Import_and_Configure_836P_Objects_ 4.03.00
in_ViewDesigner.mp4 1.0.00 5.01.00
raC_Dvc_836P
Operational_Overview_of_836P_Faceplates_in_View
D esigner.mp4
(raC-ME) raC_Dvc_836P-Faceplate.gfx 1.1.00
How_To_Import_and_Configure_836P_Object
1.0.00 10.00.00
s_in_FTViewME.mp4
11.00.00
Operational_Overview_of_836P_Faceplates_in_FTVie
1.0.00
wME.mp4
raC_Dvc_837T_4IOL_Rung.L5X
2.0.00 30.01.00
raC_Dvc_837T_8IOL_Rung.L5X
31.00.00
How_To_ Import_ and _Configure_ 837T_ Objects_ 32.00.00
1.1.00
in_LogixDesigner.mp4
raC_Dvc_837T_FP.vpd
How_To_Import_and_Configure_837T_Objects_in_ Vi 4.03.00
ewDesigner.mp4 1.0.00 5.01.00
raC_Dvc_837T
Operational_Overview_of_837T_Faceplates_in_View
Designer.mp4
(raC-ME) raC_Dvc_837T-Faceplate.gfx 1.1.00
How_To_Import_and_Configure_837T_Objects_in_FT
ViewME.mp4 10.00.00
1.0.00 11.00.00
Operational_Overview_of_837T_Faceplates_in_FTVie
wME.mp4
raC_Dvc_871FM_4IOL_Rung.L5X
2.0.00 30.01.00
raC_Dvc_871FM_8IOL_Rung.L5X
31.00.00
How_To_Import_and_Configure_871FM_Objects_ 32.00.00
raC_Dvc_871F 1.1.00
in_LogixDesigner.mp4
M
raC_Dvc_871FM_FP.vpd
4.03.00
How_To_ Im port_ and _ Configure_ 871FM_ Objects_ 1.0.00
5.01.00
in_ViewDesigner.mp4

6
 IO-Link Device Library

Studio Studio
5000 5000 FactoryTalk
Logix View
Object Name Files Version View Studio
Designer Designer
Version
Version Version

Operational_Overview_of_871FM_Faceplates_in_Vie
wDesigner.mp4
(raC-ME) raC_Dvc_871FM-Faceplate.gfx
How_To_Import_and_Configure_871FM_Objects_in_ 1.1.00
FTViewME.mp4 10.00.00
11.00.00
Operational_Overview_of_871FM_Faceplates_in_FTV
1.0.00
iewME.mp4
raC_Dvc_42JT_4IOL_Rung.L5X
30.01.00
raC_Dvc_42JT_8IOL_Rung.L5X
1.0.00 31.00.00
How_To_Import_and_Configure_42JT_Objects_in 32.00.00
_LogixDesigner.mp4
raC_Dvc_42JT_FP.vpd
How_To_Import_and_Configure_42JT_Objects_in
_ViewDesigner.mp4 1.0.00 4.03.00
raC_Dvc_42JT 5.01.00
Operational_Overview_of_42JT_Faceplates_in_
ViewDesigner.mp4
(raC-ME) raC_Dvc_42JT-Faceplate.gfx
How_To_Import_and_Configure_42JT_Objects_in
10.00.00
_FTViewME.mp4 1.0.00
11.00.00
Operational_Overview_of_42JT_Faceplates_in
_FTViewME.mp4
raC_Dvc_45CRM_4IOL_Rung.L5X
30.01.00
raC_Dvc_45CRM_8IOL_Rung.L5X
1.0.00 31.00.00
How_To_Import_and_Configure_45CRM_Objects_ 32.00.00
in_LogixDesigner.mp4
raC_Dvc_45CRM_FP.vpd
How_To_Import_and_Configure_45CRM_Objects_
in_ViewDesigner.mp4 1.0.00 4.03.00
raC_Dvc_45CRM 5.01.00
Operational_Overview_of_45CRM_Faceplates_
in_ViewDesigner.mp4
(raC-ME) raC_Dvc_45CRM-Faceplate.gfx
How_To_Import_and_Configure_45CRM_Objects_
10.00.00
in_FTViewME.mp4 1.0.00
11.00.00
Operational_Overview_of_45CRM_Faceplates_
in_FTViewME.mp4
raC_Dvc_871C_4IOL_Rung.L5X
30.01.00
raC_Dvc_871C_8IOL_Rung.L5X
1.0.00 31.00.00
How_To_Import_and_Configure_871C_Objects 32.00.00
_ in_LogixDesigner.mp4
raC_Dvc_871C raC_Dvc_871C_FP.vpd
How_To_Import_and_Configure_871C_Objects
_ in_ViewDesigner.mp4 1.0.00 4.03.00
5.01.00
Operational_Overview_of_871C_Faceplates_
in_ViewDesigner.mp4

7
 IO-Link Device Library

Studio Studio
5000 5000
FactoryTalk
Logix View
Object Name Files Version View Studio
Designer Designer
Version
Version Version

(raC-ME) raC_Dvc_871C-Faceplate.gfx
How_To_Import_and_Configure_871C_
Object s_in_FTViewME.mp4 1.0.00
10.00.00
Operational_Overview_of_871C_Faceplates 11.00.00
in_FTViewME.mp4
raC_Dvc_871TM_4IOL_Rung.L5X
30.01.00
raC_Dvc_871TM_8IOL_Rung.L5X
1.0.00 31.00.00
How_To_Import_and_Configure_871TM_Objects_ 32.00.00
in_LogixDesigner.mp4
raC_Dvc_871TM_FP.vpd
How_To_Import_and_Configure_871TM _Objects_
In_ViewDesigner.mp4 1.0.00 4.03.00
raC_Dvc_871TM 5.01.00
Operational_Overview_of_871TM_Faceplates_
in_ViewDesigner.mp4
(raC-ME) raC_Dvc_871TM-Faceplate.gfx
How_To_Import_and_Configure_871TM_Objects_
10.00.00
in_FTViewME.mp4 1.0.00
11.00.00
Operational_Overview_of_871TM_Faceplates_
in_FTViewME.mp4
30.01.00
How_To_Configure_ArmorBlock_16_Channel_IO-
1.0.00 31.00.00
Link_Hubs_Objects_in_LogixDesigner.mp4 32.00.00
raC_Dvc_1732IL_Hubs.vpd
How_To_Configure_ArmorBlock_16_Channel_IO- 1.0.00 4.03.00
5.01.00
Link_Hubs_Objects_in_ViewDesigner.mp4
(raC-ME) raC_Dvc_1732IL_IB16M12_4IOL-
Faceplate.gfx
(raC-ME) raC_Dvc_1732IL_IB16M12_8IOL-
Faceplate.gfx
raC_Dvc_1732IL_ (raC-ME) raC_Dvc_1732IL_10X6M12_4IOL-
Hubs Faceplate.gfx
(raC-ME) raC_Dvc_1732IL_10X6M12_8IOL- 10.00.00
1.0.00
Faceplate.gfx 11.00.00
(raC-ME) raC_Dvc_1732IL_16CFGM12M12L_4IOL-
Faceplate.gfx
(raC-ME) raC_Dvc_1732IL_16CFGM12M12L_8IOL-
Faceplate.gfx
How_To_Configure_ArmorBlock_16_Channel_IO-
Link_Hubs_Objects_in_FTViewME.mp4
Operational_Overview_ArmorBlock_16_Channel_IO-
1.0.00
Link_Hubs_Device_Faceplates.mp4

8
 IO-Link Device Library

Studio Studio
5000 5000
FactoryTalk
Logix View
Object Name Files Version View Studio
Designer Designer
Version
Version Version

raC_Dvc_1694_4IOL_Rung.L5X
31.00.00
raC_Dvc_1694_8IOL_Rung.L5X
1.0.00 32.00.00
How To Import and Configure 1694 Electronic Circuit 33.00.00
Protection Objects in LogixDesigner.mp4
raC_Dvc_1694_FP.vpd
How To Import and Configure 1694 Electronic Circuit 5.02.00
Protection Objects in ViewDesigner.mp4 1.0.00 6.01.00
raC_Dvc_1694
Operational Overview of 1694 Electronic Circuit 7.02.00
Protection Faceplates in ViewDesigner.mp4
(raC-ME) raC_Dvc_1694-Faceplate.gfx
(raC-SDK-ME) Toolbox – Framework.ggfx
10.00.00
How To Import and Configure 1694 Electronic Circuit 1.0.00
11.00.00
Protection Objects in FTViewME.mp4 12.00.00
raC_Dvc_856T_4IOL_Rung.L5X
31.00.00
raC_Dvc_856T_8IOL_Rung.L5X
1.0.00 32.00.00
How To Import and Configure 856T Tower light Objects 33.00.00
in LogixDesigner.mp4
raC_Dvc_856T_FP.vpd
How To Import and Configure 856T Tower light Objects 5.02.00
raC_Dvc_856T in ViewDesigner.mp4 1.0.00 6.01.00
Operational Overview of 856T Tower light 7.02.00
Faceplates in ViewDesigner.mp4
(raC-ME) raC_Dvc_856T-Faceplate.gfx
(raC-SDK-ME) Toolbox – Framework.ggfx 10.00.00
1.0.00 11.00.00
How To Import and Configure 856T Tower light Objects 12.00.00
in FTViewME.mp4

9
 IO-Link Device Library

Reference Manuals

Reference Manual Contents

File Name Requirements, Interface Tag Definitions, State Model, and Version
HMI Overview
RM-raC_Dvc_IO-Link_Master.pdf 1734-4IOL & 1732E-8IOL Master IO-Link Device Objects 2.0.00

RM-raC_Dvc_42EF.pdf 42EF Photoelectric sensor IO-Link Device Objects 2.0.00

RM-raC_Dvc_836P.pdf 836P Pressure sensor IO-Link Device Objects 2.0.00

RM-raC_Dvc_837T.pdf 837T Solid-State Temperature sensor IO-Link Device Objects 2.0.00

RM-raC_Dvc_871FM.pdf 871FM Proximity sensor IO-Link Device Objects 2.0.00

RM-raC_Dvc_42JT.pdf 42JT Photoelectric sensor IO-Link Device Objects 1.0.00

RM-raC_Dvc_45CRM.pdf 45CRM Color Registration Mark Sensor IO-Link Device Objects 1.0.00

RM-raC_Dvc_871C.pdf 871C Miniature Inductive sensor IO-Link Device Objects 1.0.00

RM-raC_Dvc_871TM.pdf 871TM Long Range Inductive sensor IO-Link Device Objects 1.0.00
RM-raC_Dvc_1694.pdf 1694 Electronic Circuit Protection IO-Link Device Objects 1.0.00
RM-raC_Dvc_856T.pdf 856T Tower Light IO-Link Device Objects 1.0.00

10
 IO-Link Device Library

3 Revision Changes
Revision 2.0.00

3.1.1 Enhancements

Added IO-Link FTView ME and View Designer Diagnostic and Configuration Faceplates and AOIs
for 42JT, 45CRM, 871C, 871TM IO-Link Sensors that are compatible with
raC_Dvc_4IOLMaster_Rung v2.0.00 or raC_Dvc_8IOLMaster_Rung v2.0.00

Added IO-Link Hubs Device Faceplates and AOI for FTView ME and View
Designer 1732IL-IB16M12, 1732IL-10X6M12, 1732IL-16CFGM 12M12L

IO-Link Master 4IOL & 8IOL Objects has been modified to support following devices
42AF, 46CLR, 46DFA, 45DMS, 45PLA, IO-Link Hub, Generic Sensor

3.1.2 Corrected Anomalies

Add-On Instructions

• 871FM_8IOL
Updated UDT- raC_UDT_Itf AD_IOLinkSensorDiscrete_Set
InhibitCf gTab tag member is deleted
Setpoint tag member is added

• 4IOL Master
Added New UDT:
raC_UDT_Itf AD_4IOL_Master_Cfg

UDT Tag name changed:

raC_UDT_Itf AD_Sensor_Data to raC_UDT_IOLink_Master_Data
raC_UDT_Itf AD_Master_Inp to raC_UDT_Itf AD_4IOL_Master_Inp

Updated UDT - raC_UDT_Itf AD_Sensor_Set

InhibitCf gTab tag member is deleted
InhibitCf gTab tag related Rung removed from logic

• 8IOL Master
Added New UDT:
raC_UDT_Itf AD_8IOL_Master_Cfg

UDT Tag name changed:

raC_UDT_8IOL_Master_Data to raC_UDT_IOLink_Master_Data and deleted unused
members.

• AOI Description Updated

837T(4IOL&8IOL), 871FM(4IOL), 42EF(4IOL&8IOL), Master 4IOL & 8IOL

• Updated footprint in ref erence manuals

11
 IO-Link Device Library

How to Video Changes

Objects Changes

• The Default Communication path and Controller Reference Name were

View Designer removed
• The AOI Tag connection from Launch Faceplate button were removed
• The Audio feedback for all the buttons is disabled
FTView ME • Parameter passing Configuration shown correctly in how to video
• How to video for FTView ME is modified to show corrected images
format (.png)

• How to video for Logix Designer is modified to show the 8IOL

Logix Designer Timestamp Data setting and import the rung into continuous task

Revision 2.1

Added 856T Tower Light Device Faceplates and AOI for FTView ME and View
Designer

Added 1694 Electronic Circuit Protectors Device Faceplates and AOI for
FTView ME and View Designer

3.1.3 Known Anomalies

None

12
 IO-Link Device Library

4 More Information
Contact RASimplification Team at [email protected]

Disclaimer of Warranty

THE MATERIALS PROVIDED OR REFERENCED BY WAY OF THIS DOCUMENT ARE PROVIDED "AS IS"
WITHOUT WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING WITHOUT
LIMITATION, ALL IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE, NON-INFRINGEMENT OR OTHER VIOLATION OF RIGHTS. ROCKWELL AUTOMATION DOES
NOT WARRANT OR MAKE ANY REPRESENTATIONS REGARDING THE USE, VALIDITY, ACCURACY, OR
RELIABILITY OF, OR THE RESULTS OF ANY USE OF, OR OTHERWISE RESPECTING, THE MATERIALS
PROVIDED OR REFERENCED BY WAY OF THIS DOCUMENT OR ANY WEB SITE LINKED TO THIS
DOCUMENT

Limitation of Liability

UNDER NO CIRCUMSTANCE (INCLUDING NEGLIGENCE AND TO THE FULLEST EXTEND PERMITTED BY

APPLICABLE LAW) WILL ROCKWELL AUTOMATION BE LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL,
INCIDENTAL, PUNITIVE OR CONSEQUENTIAL DAMAGES (INCLUDING WITHOUT LIMITATION,
BUSINESS INTERRUPTION, DELAYS, LOSS OF DATA OR PROFIT) ARISING OUT OF THE USE OR THE
INABILITY TO USE THE MATERIALS PROVIDED OR REFERENCED BY WAY OF THIS DOCUMENT EVEN IF
ROCKWELL AUTOMATION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IF USE OF
SUCH MATERIALS RESULTS IN THE NEED FOR SERVICING, REPAIR OR CORRECTION OF USER
EQUIPMENT OR DATA, USER ASSUMES ANY COSTS ASSOCIATED THEREWITH.

13