21/05/2018 Material Science and Engineering - - Unit 3 - Week 2.

Microscopes, microstructures and quantitative metallography

[email protected] ▼

Courses » Material Science and Engineering

Announcements Course Ask a Question Progress Mentor

Unit 3 - Week 2.
Microscopes, microstructures and quantitative
metallography

Course
outline Assignment 2
The due date for submitting this assignment has passed. Due on 2018-02-28, 19:19 IST.
How to access
the portal Submitted assignment

Week 1. Lattice, 1) In an optical microscope a platform where you put specimen is known as 1 point
Crystal
structures, Miller coarse
indices for stage
planes and
directions diaphragm
turret
Week 2.
No, the answer is incorrect.
Microscopes,
microstructures Score: 0
and quantitative Accepted Answers:
metallography
stage
Lesson 1.
2) The capacity of a microscope to distinguish two adjacent points on the object is 1 point
Optical
microscope known as

Lesson 2. Rayleigh Criterion

Optical
Depth of field
aberration
Resolving power
Lesson 3.
Metallography
Depth of focus

Lesson 4. No, the answer is incorrect.

Microstructure: Score: 0
Understanding
Accepted Answers:
Lesson 5. Resolving power
Quantitative
metallography 3) Calculate the numerical aperture and depth of field (h) of a microscope using 1 point
light of 400nm wavelength and μ=1.7 & semi-aperture angle = 60°.
Feedback
week-2
1.44, 19.14 nm
Quiz : 1.47, 191.4 nm
Assignment 2
1.47, 19.14 nm
Hints and 1.5, 191.4 nm
solutions
No, the answer is incorrect.
Week 3. Defects, Score: 0
diffusion and
phase diagram Accepted Answers:
1.47, 191.4 nm
Week 4.
4) The following are true about chromatic aberration: 1 point
Equilibrium

https://onlinecourses.nptel.ac.in/noc18_mm05/unit?unit=11&assessment=79 1/4
21/05/2018 Material Science and Engineering - - Unit 3 - Week 2. Microscopes, microstructures and quantitative metallography
phase diagram,
iron-carbon
phase diagram, it results from the fact that longer wavelength is deviated more than shorter
lever rule, phase wavelength.
transformation it does not occur with light of same wavelength
it occurs due to dispersion of white light from a refractive medium
Week 5. TTT and
CCT curves, heat it is dependent on the distance of the beam from the optic axis
treatments,
No, the answer is incorrect.
Introduction to
mechanical Score: 0
properties Accepted Answers:
it does not occur with light of same wavelength
Week 6. it occurs due to dispersion of white light from a refractive medium
Mechanical
behaviour of 5) The following are true about spherical aberration: 1 point
materials,
strengthening it is responsible for reduced vision in dilated pupil
mechanism
It can be reduced by increasing the aperture
Week 7. light passing through the periphery of a spherical lens is deviated more than those
Strengthening through the paraxial zone of the lens
mechanism,
fracture and
it can be reduced by using a lens with less dispersive power
fatigue No, the answer is incorrect.
Score: 0
Week 8. Creep,
ceramics and Accepted Answers:
plastic, NDT it is responsible for reduced vision in dilated pupil
techniques, alloy light passing through the periphery of a spherical lens is deviated more than those through
designation
the paraxial zone of the lens
DOWNLOAD 6) Which of the following emery paper has the coarse abrasive particle size. 1 point
VIDEOS
P2000
P4000
P1500
P600
No, the answer is incorrect.
Score: 0
Accepted Answers:
P600
7) Diamond paste is used to polish which of the following metal surfaces? 1 point

Steel
Aluminium
Both a) & b)
None of the above
No, the answer is incorrect.
Score: 0
Accepted Answers:
Both a) & b)
8) Etchants preferentially attack which of the following parts of a microstructure 1 point

Grain boundaries
Noble phases
Active phases
None of the above
No, the answer is incorrect.
Score: 0
Accepted Answers:
Grain boundaries

https://onlinecourses.nptel.ac.in/noc18_mm05/unit?unit=11&assessment=79 2/4
21/05/2018 Material Science and Engineering - - Unit 3 - Week 2. Microscopes, microstructures and quantitative metallography
Active phases
9) Guess the correct order of description for the atomic arrangement from the 1 point
limited information given in i, ii and iii:

Single crystal, Amorphous, Polycrystalline

Amorphous, Single crystal, Polycrystalline
Polycrystalline, Amorphous, Single crystal
Single crystal, Polycrystalline, Amorphous
No, the answer is incorrect.
Score: 0
Accepted Answers:
Single crystal, Polycrystalline, Amorphous
10)What is the generic name of the microstructure shown 1 point

Microstructure having equiaxed grains

Lamellar microstructure
Pearlitic microstructure
None of the above
No, the answer is incorrect.
Score: 0
Accepted Answers:
Lamellar microstructure
11)What is the ideal shape of a grain? 1 point

Octagonal
Cuboidal
Hexagonal
None of the above
No, the answer is incorrect.
Score: 0
Accepted Answers:
None of the above
12)Calculate the number of grains per square inch at a magnification of 100X when 1 point
the ASTM grain size number is 8:

124

https://onlinecourses.nptel.ac.in/noc18_mm05/unit?unit=11&assessment=79 3/4
21/05/2018 Material Science and Engineering - - Unit 3 - Week 2. Microscopes, microstructures and quantitative metallography

128
132
256
No, the answer is incorrect.
Score: 0
Accepted Answers:
128
13)Which of the following is true for the grain size measurement using linear 1 point
intercept method

Line cutting a boundary is taken as 0.5

Line touching a boundary is taken as 1
Line passing through a triple point is taken as 2
None of the above
No, the answer is incorrect.
Score: 0
Accepted Answers:
None of the above

Previous Page End

© 2014 NPTEL - Privacy & Terms - Honor Code - FAQs -

A project of In association with

Funded by

Powered by

https://onlinecourses.nptel.ac.in/noc18_mm05/unit?unit=11&assessment=79 4/4