Spectra Lab
Spectra Lab
Procedure:
1. Set up the incandescent light source. Support the student spectroscope with the test tube
2. Draw the visible continuous spectrum that you see along with the scale readings in the
3. Prepare an observation table
4. Place one of the spectrum tubes into the high voltage energy source.
5. Record name of the element being observed, and carefully describe the colour in the tube.
6. Observe the Geissler tube through the spectroscope, and record exactly what you see.
7. Repeat steps 4, 5 and 6 for each spectrum tube
Data:
Colour to the
Material Naked Eye Spectral Lines
Red Orange Green
Argon(Ar) Violet Blue Violet
Red Orange Green
Hydrogen(H2) Light Violet Blue Violet
Red Yellow Green
Helium(He) Light Yellow Blue Violet
Red Orange Yellow
Green Blue Indigo
Iodine(I2) White Violet
Red Orange Yellow
Neon(Ne) Orange Green Blue Indigo
Calculations:
The Calculation paper is appended to the back