Part1 Electricals / Electronics / Embedded

Part1. ed_english_catalog1_v1.indd 1 2014-02-25 �� 10:54:33

 PART1.
Electricals / Electronics / Embedded

E3_SMART LEARNING SYSTEM

ED-DAVINCI_EMBEDDED&DSP DESIGN PLATFORM
ED-270M_EMBEDDED SOFTWARE DESIGN MULTI PLATFORM
ED-4513_MICROPROCESSOR COMBOII
ED-2110_MULTI FUNCTON MEASURING INSTRUMENT SYSTEM
CBIS-1400_COMPUTER BASED INSTRUMENT SYSTEM
ED-1420_PC BASED BASIC ELECTRICITY&ELECTRONICS TRAINER
ED-1430_PC BASED POWER ELECTRONICS TRAIVER
ED-1010_BASIC ELECTRICITY & ELECTRONICS TRAINER
ED-2000E_BASIC ELECTRICITY & ELECTRONICS TRAINER
ED-2040_POWER ELECTRONICS TRAINER
ED-4010_SEQUENCE CONTROL TRAINER -AC
ED-4010DC_SEQUENCE CONTROL TRAINER - DC
ED-2300_ELECTRONICS DEMONSTRATION SYSTEM
ED-2200_ANALOG LAB UNIT
ED-5060_SCR TRAINER
ED-6000_OP-AMP CIRCUIT TRAINER
ED-1000BS_LOGIC LAB UNIT
ED-1440T/C_LOGIC/DIGITAL DEMONSTRATION SYSTEM
ED-6400_PULSE CIRCUIT TRAINER
ED-6800B_SENSOR APPLICATION TRAINER
ED-6830_SENSOR TRAINER FOR FACTORY AUTOMATION
ED-5100_MOTOR/GENERATOR TRAINING SET
MG-5211_DC(SHUNT,SERIES)MOTOR/DC GENERATOR
MG-5212_SQUIRREL CAGE INDUCTION MOTOR/DC GENERATOR
MG-5213_WOUND-ROTOR INDUCTION MOTOR/DC GENERATOR
MG-5214_DC(SHUNT,COMPOUND)MOTOR/AC GENERATOR
MG-5215_SYNCHRONOUS MOTOR(3-PHASE)/DC GENERATOR
MG-5216_REPULSION MOTOR/DC GENERATOR
MG-5219_SQUIRREL CAGE INDUCTION MOTOR/ELECTRO-DYNAMOMETER
ED-5300_ELECTRLCAL MACHINE TRAINER
ED-4400B_DC SERVO TRAINER
ED-4270M_SERVO UNIT TRAINER
ED-4280M_INVERIER TRAINER
ED-4301_STEPPING MOTOR TRAINER
ED-4302_DC SERVO MOTOR TRAINER
ED-4303_AC SERVO MOTOR TRAINER
ED-4304_INVERIER MOTOR TRAINER
ED-2070_POWER TRANSMISSION TRAINER

w w w. e d . c o . k r

Part1. ed_english_catalog1_v1.indd 2 2014-02-25 �� 10:54:34

 • Smart Learning Tool

E3 SMART LEARNING SYSTEM

(Contents-running System)

(Interface Board)
Wire LAN (iOS,OSX)
Wireless

RS-232C

Bluetooth

USB
Middle ware Web server (Android)

USBContents
Interface

(MS Windows)

Any Device Any Computer

> FEATURE
• E3 System supplies smart environment for engineering education.
• Just one E3 Platform enables many user to do learning and to share learing material according to user’s control.
• E3 System supplies H/W connecting function through various(Ether-net, Wireless-Ether-net, Bluetooth, RS-232C,
USB to Serial) Interface.
• Regardless of terminals, it supplies educational environment using wireless Internet. (Android, IOS, Windows,
Linux)
• E3 System supplies the function developing HTML5 contents, which makes educational contents operate in smart
environment by using text editing function of writing tool.
• E3 System can create contents by using writing tools and reconstitute contents according to user’s need.
• E3 System supplies component writing tool to develop interface for H/W connecting.
• Templates of component writing tool make it possible to realize various GUI Interface which needs to connect
diverse H/W

> SPECIFICATION
• E3(a) Docking Platform
» CPU : 700MHz ARM11
» Memory : 512MB
» Storage : 16GB
» Network : 10/100 Ethernet 4 Port, Wireless Access Point
» USB : 5 USB Port
» Serial : RS-232C 1 Port
» Power : DC 5V

1 Part1 Electricals / Electronics / Embedded

Part1. ed_english_catalog1_v1.indd 1 2014-02-25 �� 10:54:35

 • Smart Learning Tool

E3 SMART LEARNING SYSTEM

Electronics
Embedded

Electricals
> SPECIFICATION
• Contents Authoring Software

Renewable
energy &
» Contents Authoring Tool

LED
› Project Management, HTML Edit function by GUI, Contents Simulation
› Contents Release Function

» Component Writing Tool

› Edit by HTML and Javascript

Communication
› Protocol Making for the communication with E3 Docking Platform
› Component Release

IT/
» System Requirement
› CPU : Main Clock 1Ghz or Higher
› RAM : Main Memory 1GB or Higher
› Storage : Reserved Space over 500MB

Measurement
• Multiple Learning Contents Support

Test&
» Teaching and Learning by the Selection of Contents in the Multiple Storage (USB Stick)
» Select an item in the Learnign Sequence of the Selected Contents and then Move to the Page

Automation

Intelligent
Robot/
Mechatronics
• Contents Control Right and Execution
» All users accessing to the E3 Smart Learning System can view the same
page by teacher or anyone who has the contents control Right
» Control, Monitoring and Execution of the Hardware interfaced to the E3
Dockingt Platform
» Display and Modification of Hardware Access Method and its Property for
Simulation

the Contents
Software

ACCESSORIES
Pneumatics
Hydraulics

• Authoring Tool Software CD : 1 EA • AC Power Adapter : 1 EA

• Communication Cable : 1 Set • User’s Manual and Text book : 1 Book and 1 CD

www.ed.co.kr 2

Part1. ed_english_catalog1_v1.indd 2 2014-02-25 �� 10:54:35

 • Smart Learning Tool

E3 SMART LEARNING SYSTEM

Contents Authoring

How to Use Contents

- Contents Authoring Project

- HTML Edit based on GUI - Save Contents into USB Memory Stick
- Components Generation and Edit - Insert USB Stick into E3 Platform
- Contents Simulation

How to Use Contents

Teaching and Learning

Diverse Hardware Interface

-Wired/Wireless LAN, Bluetooth, USB, RS-232C, USB to Serial

- Teaching and Learning by the Selection of Contents in the Multiple Storage (USB Stick)
- All users accessing to the E3 Smart Learning System can view the same page by teacher or anyone
who has the contents control Right

(Contents-running System)
(Interface Board)

Wire LAN

Wireless

RS-232C

Bluetooth

USB (iOS,OSX) (Android) (MS Windows)

Middle ware Web server

USBContents
Any Device Any Computer
Interface

3 Part1 Electricals / Electronics / Embedded

Part1. ed_english_catalog1_v1.indd 3 2014-02-25 �� 10:54:35

 • Embedded & Microprocessor Control

ED-DAVINCI EMBEDDED & DSP DESIGN PLATFORM

Electronics
Embedded

Electricals
• One-stop training kit for Embedded System, DSP and FPGA
• Texas Instrument Davinci Processor containing the built-in ARM Core and DSP Core
- 297MHz ARM926EJ-STM ARM Core
- 594MHz TMS320C64x+TM DSP Core

Renewable
energy &
• ALTERA Cyclone 120,000Gate, a FPGA Chip, mounted for interlocking experiments on SoC

LED
• Embedded System gearing with DSP and FPGA
• Embedded LINUX from basic to advanced courses
• 7″Wide TFT LCD, 10/100 Ethernet 1Port, Serial 1Port, SD/MMC and other interfaces

Communication
IT/
Measurement
Test&
Automation

Intelligent
Robot/
> SPECIFICATION
• CPU • Input Voltage : AC 220V

Mechatronics
» TMS320DM6446 • Dimension : 490(W) x 160(H) x 320(D)mm, 15kg
› ARM926EJ-STM(297MHz) ARM Core
› TMS320C64x+TM(594MHz) DSP Core
• Memory ACCESSORIES
» DDR2 DRAM 256MByte
» NOR FLASH 32MByte
• AC Power Cord : 1ea
» NAND FLASH 64MByte
» SRAM 4MByte • Cable(JTAG, Serial, UTP) : 1set
• Display • Source Data CD : 1ea
» 7”Wide TFT-LCD, PD064VT2 • User Manual
Simulation

» 7”Wide Touch Screen

Software

• Serial Communication : UART 1Port

• Ethernet : 10/100 Ethernet 1Port
• USB 2.0 : HOST 1Port
• IDE : 44Pin IDE Connector
• Card Slot : SD/MMC - 1Slot
• IrDA : TSOP34840
• Video
» Video In : NTSC
» Video Out : DAC, TFT LCD
Pneumatics
Hydraulics

• Audio
» Audio In : MIC Line
» Audio out : Headphone, Stereo
• LED : I2C-GPIO LED
• Add-on Board : ED-255FPGA Board
• Expansion Connector : 160-pin Expansion Connector(80 x 2)
• Debug : PC Interface 10-pin Connector

www.ed.co.kr 4

Part1. ed_english_catalog1_v1.indd 4 2014-02-25 �� 10:54:36

 • Embedded & Microprocessor Control

EMBEDDED SOFTWARE DESIGN

ED-270M MULTI PLATFORM

• Foundation for the Ubiquitous System Build

• Intel PXA 270 high performance processors
• 6.4” TFT LCD, Ethernet 3Port, Serial 3Port, PCMCIA/CF/MMC interfaces
• FPGA Chip Altera Cyclone 4,000 LEs(12,000 LEs Option) for SoC courses
• Processor Core Board & CMOS Image Sensor
• Various types of application modules such as IrDA, RF, Voice Recognition, Ultrasonic,
Robot Arm, 485 Communication Modules(Option)

> APPLICATION MODULES (OPTIONS : 9EA)

• RS-48S Receiver • IrDA Transreceiver • Voice
• RS-48S Transreceiver • RF Receiver • Ultra Wave
• IrDA Receiver • RF Transreceiver • Robot Arm

> SPECIFICATION
» HARDWARE
• CPU • Control
» CPU » LED : Status LED
› ED-270M : PXA270(520MHz)
• Memory • Audio
» FLASH » Stereo I/O : Cirrus CS4202
› ED-270M : 32MByte
» SDRAM : 128MByte(32bits Access) • Pin
» SRAM : 1MByte(32bits Access) » Ext. I/O : 80pinx2 Connector
» App. I/O : 20pin Connector
• Display » Servo Motor : 4port
» TFT LCD : Touch Pad(6.4inch), 16bits Color,640x480

5 Part1 Electricals / Electronics / Embedded

Part1. ed_english_catalog1_v1.indd 5 2014-02-25 �� 10:54:36

 • Embedded & Microprocessor Control

EMBEDDED SOFTWARE DESIGN

ED-270M

Electronics
Embedded

Electricals
MULTI PLATFORM

• Debug ACCESSORIES
» Multi-ICE : Multi-ICE 20Pin Connector
» JTAG : PC Interface 10Pin Connector • Cable(Parallel, Serial, Ethernet, USB) : 1set
• JTAG Download Cable : 1ea

Renewable
energy &
• Interface
» Ethernet • JTAG Download Cable : 1ea

LED
› 10/100Mbps Ethernet(SMSC LAN91C111)-2port • Touch Screen Pen(Stylus Pen) : 1ea
› 10Mbps Ethernet(CS8900A)-1port • CD(Program Source, Circuit Diagram) : 1ea
» Serial Port • User Manual
› Full Function UART-1port, Standard UART-1port • AC Power Cord : 1ea
» USB 1.1 : Host(SL811HST), Client
» USB 2.0 : TD242LP(HOST, OTG)

Communication
» PS/2 Port : Keyboard, Mouse
» Touch-Screen : ADS7846
» Slot : PCMCIA - 1slot, CF-1slot, MMC/SD-1slot

IT/
» RTC : Epson RTC4513 Real Time Clock
» IrDA : HDSL3600 OPTION
» IDE : 44pin IDE Connector
» PCI : 32bit PCI-1slot
• Application Module(9ea)
• Basic Characteristics › RS-48S Receiver
» Input Voltage : 220V

Measurement
› RS-48S Transreceiver
» Size : 490(W) x 160(H) x 320(D)mm › IrDA Receiver

Test&
› IrDATransreceive
» SOFTWARE › RF Receiver
› RF Transreceiver
• OS
› Voice
» Qplus/ESTO : ETRI Linux & Embedded System Tool Kit
› Ultra Wave
» WinCE, net 4.2 : Window CE
› Robot Arm
» Boot Loader : uboot-1.1.4

Automation
» Kernel : Linux-2.6.11 • Carrying case for Application Module(1ea)

Intelligent
Robot/
» File System : Ramdisk(Image, Source)

• Software
» Application
› Network Application Source
› Qt/Embedded Image
› Graphic & Text Display Control
› Application Source

Mechatronics
› I/O Interface Application Source
» Device Driver
› 8 bits LED
› 7-Segment Control Source
› UART Application Source(Bootloader)
› Web Service & Remote Control Source
› AC97 Audio Codec Driver Source
› ADS7846 Touch-screen Driver Source
Simulation

› PCMCIA Device Driver Source

Software

› RTC4513 Device Driver Source

› IrDA Device Driver Source
› MMC/SD Device Driver Source
› CF Card Device Driver Source
› LAN91C111 Device Driver Source
› LAN CS8900A Device Driver Source
Pneumatics
Hydraulics

www.ed.co.kr 6

Part1. ed_english_catalog1_v1.indd 6 2014-02-25 �� 10:54:36

 • Embedded & Microprocessor Control

ED-4513 MICROPROCESSOR COMBO II

• Mountable 5pieces MCU(8051,PIC, ATmega128, ATmega8535, upd78F0547)

• Practice of various communications such as RS-232 USB and Ethernet
• SoC experiments using the default FPGA (EP1C4F324)
• Storage of sensor data display and excel data using UI(LabVIEW)
• Module Extension : RFID(13.56MHz), ZigBee, LonWorks, 8 sensor modules(option)
• Possible to be linked with ED-3160 and ED-5965(option)

> EXPERIMENTS
MICROPROCESSOR SENSOR (Option)
• Digital I/O control - Tact Switch, Toggle Switch, Relay • Optical Sensor(Option)
control, Key Matrix » CdS, Photo Diode, Photo Transistor, Photo Interrupt, Photo
• Display control - FND, Dot matrix, TEXT LCD, Graphic LCD Coupler, Pulse Diffused Sensor, Laser Diode, Color Sensor
• Motor Control - DC Motor(24V), Stepping Motor (24V) • Temperature Sensor (Option)
• ADC/DAC Control - LM35, VR, CDS, Human detection sensor » RTD Sensor, Thermocouple Sensor, Thermistor, IC,
• Communication Control - RS-232, USB, Ethernet Temperature Switch Sensor
• Time/Temperature - DS1620, DS1302 • Magnetic Sensor (Option)
• External EEPROM Read/Write - 2432, 9366 (EEPROM) » Hall IC(switching, linear type), Magnetic Resistance(MR
READ/WRITE elements)
• RFID/Zigbee/LonWork s(Option) • Proximity Sensor (Option)
» Inductive Sensor, Capacitive Sensor, Magnetic Sensor

> SPECIFICATION
MCU • ATmega128
• AT89C51ED2 » 7.3728MHz System Clock
» 11.0592MHz System Clock » 128Kbyte Flash Memory
» 64Kbyte Flash Memory » 40Pin GPIO Ports
» 32Pin GPIO Ports » 10bit 8-channel A/D Converter
» UART, Interrupt, Timer » UART, Interrupt, Timer
» ISP Support » ISP Support

7 Part1 Electricals / Electronics / Embedded

Part1. ed_english_catalog1_v1.indd 7 2014-02-25 �� 10:54:36

 • Embedded & Microprocessor Control

ED-4513 MICROPROCESSOR COMBO II

Electronics
Embedded

Electricals
> SPECIFICATION
• PIC16F874 SENSOR MODULES (OPTION)
» 4MHz System Clock

Renewable
• Optical Sensor

energy &
» Flash Memory 4K x 14 words » Color Sensor : TS230 color sensor

LED
» 32Pin GPIO Ports » Infrared Sensor : KSM603LM, SI5312 infrared sensor
» 10bit 8-channel A/D Converter » Fiber Optic Sensor : BF3RX optical fiber sensor
» UART, Interrupt, Timer • Temperature Sensor
» ISP Support » RTD ; PT100 RTD sensor
ATmega8535 » Temperature IC : AD590, LM35
» 7.3728MHz System Clock

Communication
» Thermocouple : K type thermocouple sensor
» 8Kbyte Flash Memory • Proximity Sensor
» 32Pin GPIO Ports » Inductive : PSN17-5DP inductive proximity sensor

IT/
» 10bit 8-channel A/D Converter » Capacitive : CR18-8DP capacitive proximity sensor
» UART, Interrupt, Timer • Magnetic Sensor
» ISP Support » Magnetic : Hall IC : SS49
• uPD78F0547 Output Range : -1000~+1000 Gauss
» 20MHz System Clock
» 128Kbyte Flash Memory GENERAL CHARACTERISTICS
» 32Pin GPIO Ports

Measurement
• Dimension : 490(W) x 160(H) x 320(D)mm
» 10bit 8-channel A/D Converter • Input Voltage : AC 220V

Test&
» UART, Interrupt, Timer
» ISP Support

MAIN BOARD
• FPGA ACCESSORIES
» EP1C4F324 : 4000 LEs, 2 PLLs 249Pin User I/O
• Serial Cable : 1ea
• Display
• USB Cable : 1ea

Automation
» LCD : 128 x 64 Graphic LCD with back light

Intelligent
• Ethernet Cross Cable : 1ea

Robot/
16 x 2 line Character LCD with back light
• 10pin Data Cable : 1ea
» Dot Matrix : 8x8 Dot Matrix x 2
• AC Power Cord : 1ea
» 7-Segment : 4digit 7-Segments
• CD (Program Source, Circuit Diagram) : 1ea
» LED : 16digit LED(Green &Red)
• Experimental Manual
• Motor
» Motor : Stepping Motor
• Relay

Mechatronics
» Relay : DC Motor (PWM, DAC) OPTION
DC Relay 4EA
• PISO • RFID : 1ea
» PISO : 74HC165 Parallel Input Serial Output • ZigBee : 1ea
• SIPO
» SIPO : 74HC595 Serial Input Parallel Output
• Interface
» RS-232 : UART 1EA
» USB : USB to RS-232
Simulation

» Ethernet : 10Base-T Ethernet (Up to 25Mbps)

Software

• Sound
» Sound : ISD2560 Voice Recode/Playback
• RTC
» RTC : DS1302 Real Time Clock
• Sensor
» Temperature : -55˚C~ +125˚C Digital Thermometer
» Pyroelectric Infrared : D203S Pyroelectric Infrared Sensor
» Humidity : SHT11 Humidity Sensor
Pneumatics
Hydraulics

www.ed.co.kr 8

Part1. ed_english_catalog1_v1.indd 8 2014-02-25 �� 10:54:36

 • Electricals & Electronics

MULTI FUNCTION MEASURING

ED-2110 INSTRUMENT SYSTEM

The multi functional experiment trainer of ED providing the necessary measuring instruments for
electrical and electronic training is suitable for digital, analog, LabVIEW experiment, electricity &
electronics, medical electronics, communication, measuring control, smart-grid electric control and
renewable energy etc.

> EXPERIMENTS > COMPONENT LIST

• Diode/Zener Characteristic
• Transistor Characteristic
• FET Characteristic
• SCR Characteristic
• UJT Characteristic
• SCR/TRIAC/SBS Trigger
• LED/PHOTO Device
• Base/Emitter Ground Amp.
• DC Amplifier
• Complementary Amplifier
• Differential Amplifier
• Operational Amplifier
• Active Filter Circuit
• Unregulated Power Supply
• GUI program experiment using
LabVIEW program.

> ACCESSORIES
• AC Power Cord : 1ea
• Jumper Wire : 1set
• Test lead : 1ea
• Instruction Manual : 1ea

9 Part1 Electricals / Electronics / Embedded

Part1. ed_english_catalog1_v1.indd 9 2014-02-25 �� 10:54:36

 • Electricals & Electronics

MULTI FUNCTION MEASURING

ED-2110

Electronics
Embedded

Electricals
INSTRUMENT SYSTEM

> FEATURES > SPECIFICATION

» CONTROL AND DISPLAY USING LCD
Experiment through the
• 2Channel DC Power Supply
function generator, power

Renewable
» Output Channel : 2CH Output

energy &
supply, frequency counter, » Variable Power Supply : 2 x 0~25V, 1A

LED
DMM and measuring » Internal Resistance : < 15mΩ
resource etc. » Stability : < 2.5mV
» Recovery Time : < 80μs
» Load Regulation : < 0.05
» Temperature Coefficient : 0.1%/˚C
Provide the value of R&C » Ripple and Noise : < 5mV

Communication
element which user wants » Output Current : Max. 1A
through programmable » Current Limit : 10mA to 1000mA
resister & capacitor

IT/
function. • Signal Pulse Generator
» Output Range : 1CH, 1Hz ~ 200kHz
» Output Voltage : 20Vp-p (10Vp-p at Load 50Ω)
Circuit assembly and experiment » Output Waveforms : Sine, Triangle, Square
for various fields such as electricity
& electronics, medical electronics, • Frequency Counter

Measurement
communication,measuring » Frequency Measurement Range : 0~1MHz
control, smart-grid electric control, » Sensitivity : 100mV (1Hz~1MHz Sine wave)

Test&
renewable energy and logic etc. » Input Noise : < 100μV
» Maximum Input Voltage : 250V(DC+AC peak) from
0~440Hz

Measuring instrument control, • Digital Multimeter

DATA monitoring and GUI » DC VOLTAGE
program experiment using › Range : 4V, 40V, 400V, 1000V
LabVIEW program. › Resolution : 100μV, 1mV, 10mV, 100mV

Automation

Intelligent
› Accuracy : 4V~1000V : ±1%

Robot/
› Maximum Input Voltage :1000V for 40V, 400V Input
› Input Impedance : 10MΩ || 70pF
Various experiments using » AC VOLTAGE
› Range : 4V, 40V, 400V, 750V
24 experimental modules
› Resolution : 100μV, 1mV, 10mV
and 50 experimental
› Accuracy 400mV~40V : ±3% at 40H~10kHz
circuits. › 200V and 750V : ±3% at 40H~100Hz

Mechatronics
› Input Impedance : 10MΩ || 70pF
» DC CURRENT
› Range : 40mA, 400mA, 4A
Provide various switch, › Resolution : 10μA, 100μA, 1mA
relay, FND, buzzer and › Accuracy : 400mA~4A : ±1%
» AC CURRENT
speaker to use the circuit
› Range : 40mA, 400mA, 4A
experiment easily.
› Resolution : 10μA, 100μA, 1mA
› Accuracy (40Hz~100Hz) : 2~200mA : ±3%
» RESISTANCE
Simulation
Software

› Range : 4kΩ, 40kΩ, 400kΩ, 4MΩ

Possible to check › Resolution : 100mΩ, 1Ω, 10Ω, 100Ω, 1kΩ
measuring value from LCD › Accuracy : ±1%
screen and keep safely › Diode Test, Short Test
by screen panel with tilt
• Pulse Generator
device.
» Frequency Selection Range : 1Hz, 10Hz, 100kHz
» Output Range : TTL Level
Pneumatics
Hydraulics

Possible to control the • Analog Meter

measuring instrument » Voltage, Current Measuring Function
using TFT LCD, set up the » LCD Displaying Analog Meter
port, select the value of » Current Measurement Range : 100mA
» Voltage Measurement Range : 10V
element and watch the
» Voltage Meter Input Impedance : 1MΩ
data in real time.
» Current Meter Input Impedance : 1Ω

www.ed.co.kr 10

Part1. ed_english_catalog1_v1.indd 10 2014-02-25 �� 10:54:37

 • Electricals & Electronics

MULTI FUNCTION MEASURING

ED-2110 INSTRUMENT SYSTEM

> SPECIFICATION
• Programmable Resistor » GUI
» Provide Digitally Variable Output
» Output Value : 1kΩ~15kΩ, 10kΩ~150kΩ, 100kΩ~1.5MΩ
» Output Error : 1%
» Available Power : 0.25W
» 3CH Output Providing
2 Channel Power Supply FG, FC, Puls Generator Digital Multi Meter

• Programmable Capacitor
» Provide Digitally Variable Output
» Output Value : 100pF~0.1μF, 1000pF~1μF
» Output Error : 10%
Analogue Meter Programmable R&C
» Available Voltage : 0~50V

» OTHER
• FND
» 1 digits (Hexadecimal Number Indicator)
» Anode / Cathode Selectable Common Mode
» BCD Data Input » GENERAL CHARACTERISTICS
» BCD data display • Bread Board : Socket Strip(630 Hole) 3ea, Bus Strip 4ea
• Relay • Communication Port : USB 1Port, RS232 1Port
» DC 5V RELAY • Dimension : 454(W) x 108(H) x 367(D)mm
› Nominal Operating Current 16.7mA • Module Dimension : 198(W) x 14(H) x 108(D)mm
› Coil Resistance : 720Ω
› Nominal Operating Power 200mW
» DC 12V RELAY ED-2120(OPTION)
› Nominal Operating Current 40mA
(Smart Electricity & Electronics Trainer)
› Coil Resistance : 125Ω
› Nominal Operating Power 200mW • DC Circuit (Module : M01, M02)
• Fixed Power Supply » Ohm’s Law, Kirchoff’s Law, Serial/Parallel,
» Output Voltage : Providing Fixed 4CH Whetstone bridge
(+5V, -5V, +15V, -15V)
• AC Circuit (Module : M3, M4)
» Output Current : 500mA
» DC Over Load Alarm & Indication » RC/RL Circuit, LC Resonance, Filter Circuit
• Speaker
» Rated Input Power : 0.5W • Transformer(Module: M5, M6, M7)
» Input Impedance : 8Ω » Step Up/Down Transformer, Transformer Ratio,
» Frequency Range : fo~8kHz Transformer Load
• Buzzer
» Sound Output : 80dB
• Semiconductor(Module: M8, M9, M10)
» Input Voltage : 3V~7V
» Resonant Frequency : 300~2500Hz » Diode Characteristic, Zener Diode, NPN/PNP Transistor
» Current Consumption : 20mA J-FET- MOS-FET, SCR, SCR Phase Control
• Logic Switch
» 8 Lock SW (Bounceless Output) • Transistor Amplifier(Moldule: M11, M12, M13)
» Bounceless Output Built-in Function » Amplifier Biasing
» Hi/Lo Select LED Indicator » Common Emitter Amp.
» 8 Channel Output Terminal
» Complementarty Amp.
• Variable Resistor
» Output Value : 10Ω~10kΩ, 10Ω~100kΩ » Darlington Amp.
» Available Power : 5W » Differential Amp.
• Control Switch
» Slide Switch, Toggle Switch, Push Switch Providing • Op-Amp(Module: M14, M15)
• HI/LO Pulse » Inverting Amp, Non-Inverting Amp, Differential Amp,
» Hi/Lo Pulse Output
DC Offset, Non-Inverting,Offset, Inverting,Summing Amp.
» Pulse Cycle : 200mS
» Output Voltage : TTL Level
• Push Switch • Active Filter(Module: M16, M17 )
» Normal Open Push Switch » Low Pass Filter,High Pass Filter,Band pass Filter
» Normal Close Push Switch
• Touch LCD
» 7” TFT Touch LCD
» 16bits Color

11 Part1 Electricals / Electronics / Embedded

Part1. ed_english_catalog1_v1.indd 11 2014-02-25 �� 10:54:37

 • Electricals & Electronics

MULTI FUNCTION MEASURING

ED-2110

Electronics
Embedded

Electricals
INSTRUMENT SYSTEM

• Power Supply(Module: M18, M19)

» Half Rectifier, Bridge Circuit DC Voltage Regulator, Smoothing CKT, Fixed Voltage Regulator, Variable Voltage Regulator

Renewable
energy &
• Oscillator(Module: M20, M21)

LED
» Phase Shift OSC, Wien Bridge OSC, Colpitts OSC.
Hartley OSC,Crystal OSC.

• Pulse Circuit(Module: M22, M23, M24)

» Clipping ,Schmitt Trigger,Bistable Multivibration Monostable Multivibration, Astable Multivibration

Communication
• Fundamental Logic(Module: M25, M26)
» Diode Logic,And/Nand Gate,OR/XOR Gate,Not Gate

IT/
• Sequential Logic(Module: M27, M28)
» RS Flip, Flop, JK Filp, Flop, Binary Counter, Shift Register

• Combination Logic(Module: M29, M30)

» Decoder, Encoder, Multiplexer/Demultiplexer, Adder/Subtracter

Measurement
Test&
• Signal Converter(Module M31, M32, M33, M34)
» A/D Converter,D/A Converter,F/V Converter, V/F Converter

Automation

Intelligent
Robot/
Mechatronics
Simulation
Software
Pneumatics
Hydraulics

www.ed.co.kr 12

Part1. ed_english_catalog1_v1.indd 12 2014-02-25 �� 10:54:37

 • Electricals & Electronics

CBIS-1400 COMPUTER BASED INSTRUMENT SYSTEM

• PC-based multi-function instrument for electricity/electronics and other experiments

• Digital Storage Oscilloscope with the 2-channel simultaneous 50MS/s sampling rate
• Spectrum Analyzer functions using Digital Storage Oscilloscope(DSO)
• Variable Power Supply(VPS), Function Generator(FG), Analog Output and Digital Output
• Analysis of collected data on PC through the modules of DSO, DMM, FC and Analog/Digital Input
• Numerical and graphical indication of the data measured and analyzed in real time

> SPECIFICATION
» SOFTWARE » MEASURING INSTRUMENT
• Software Measurement SPECIFICATION • Digital Storage Oscilloscope
» Digital Storage Oscilloscope » Channel : 2 channels, 2 x BNC(AC/DC Coupling) + 1
› 2-channel wave verification, measurement, storage External Trigger
and print » Sampling Rate : 50MS/s(when using 2 channels)
› Spectrum Analyzer » Bandwidth : 25MS/s
› X-Y Scope » Resolution : 12bit
› Measuring : Frequency, Amplitude, Max/Min, Peak to » Accuracy : ±1%
Peak, RMS » Input Impedance : 1MΩ
» Variable Power Supply » Overload Protection : ±100V
› 2-channel power supply(0~25V) » Buffer Size : 128k
› Current limit setup » Interface : USB
» Digital Multi-meter
› Resistance/Voltage/Current/Diode/Continuous • Variable Power Supply
» Frequency Counter : Reset, Attenuation, Triggering » Number of Output Channels : 2 channels
» Function Generator : 2-channel Triangle/Square/Sine » Output : Variable Power Supply(0~25V, 1A)x2ea
wave output, Sweep functions » Internal Resistance : < 15mΩ
» OS Environment » Stability : < 2.5mV
› Pentium IV 1.7GHz, RAM 512M or higher » Recovery Time : < 80μs
› Hard Disk Min. 500Mbyte free space » Load Regulation : < 0.05
› USB 2.0 compatible » Temperature Coefficient : 0.1%/˚C
› Windows NT4.0, 2000, XP, 7 » Ripple & Noise : < 5mV
» Output Current : Max. 1A

13 Part1 Electricals / Electronics / Embedded

Part1. ed_english_catalog1_v1.indd 13 2014-02-25 �� 10:54:37

 • Electricals & Electronics

CBIS-1400 COMPUTER BASED INSTRUMENT SYSTEM

Electronics
Embedded

Electricals
> SPECIFICATION
» Current Limit : Adjustable current limiter(10mA to › Range : 100ms to 10s in 3 steps
1000mA) » Frequency : 10MHz TCXO

Renewable
energy &
» Resolution : 100mV step, 10mA step » Accuracy : 1x10-6(10˚C~40˚C)

LED
» Interface : USB » Interface : USB

• Digital Multimeter • Function Generator

» DC Voltage » Number of Output Channels : 2 channels
› Range : 400mV, 4V, 40V, 400V, 1000V » Frequency Range

Communication
› Resolution : 10μV, 100μV, 1mV, 10mV, 100mV › SINE : 1Hz~5MHz, SQUARE : 1Hz~1MHz,
› Accuracy : 2V to 1000V : ±0.1% TRIANGLE : 1Hz~1MHz

IT/
› Maximum Input Voltage : 1000V for 40V, 400V » Control Method : Variable adjustment on PC
and 1000V range, 380Vp for 4V range » Resolution : 0.1Hz
› Input Impedance : 10MΩ II 70pF » Output Voltage : 20Vp-p(10Vp-p into 50Ω)
› Input Current : Max. 10pA(23˚C) » Attenuator
» DC Current › Max. 60dB
› Range : 40mA, 400mA, 4A, 10A › 2step : 20dB±0.5dB, Variable : 0~20dB

Measurement
› Resolution : 1μA, 10μA, 100μA, 1mA » DC Offset : ±5V(±2.5V into 50Ω load)

Test&
› Accuracy : 40mA to 400mA : ±1%, 4A to 10A : ±1.5 » Sweep
» AC Voltage › Mode : Linear
› Range : 400mV, 4V, 40V, 400V, 750V › Speed : 20ms~5s
› Resolution : 10μV, 100μV, 1mV, 10mV › Range : 1:100
› Accuracy : 400mV to 40V : ±2% at 40Hz~10kHz : ±3% » Signal Type : SINE, SQUARE, TRIANGLE
at 10Hz~20kHz 400V and 750V : ± 2% at 40Hz~100Hz » Interface : USB
› Maximum Input Voltage : 1000V for 40V, 400V and

Automation

Intelligent
750V range,380Vp for 400mV, 4V range • Multi-Function

Robot/
› Input Impedance : 10MΩ || 70pF » Analog Input
» AC Current › Number of Input Channels : 8 channels
› Range : 40mA, 400mA, 4A, 10A › Resolution : 12bit
› Resolution : 1μA, 10μA, 100μA, 1mA › Input Range : ±10V
› Accuracy(at 40Hz to 100Hz) : 40mA : ±2%, » Analog Output
400mA to 4A : ±3% › Number of Output Channels : 2 channels

Mechatronics
» Resistance › Output Voltage : 0~5V
› Range : 400Ω, 4kΩ, 40kΩ, 400kΩ, 4MΩ, 40MΩ › Output Current : 5mA
› Resolution : 10mΩ, 100mΩ, 1Ω, 10Ω, 100Ω, 1kΩ » Digital Input
› Accuracy : ±1% ; ±1.5% for 20MΩ › Number of Input Channels : 12 channels
› Interface : USB › Input Level : TTL logic level
» Digital Output
• Frequency Counter › Number of Input Channels : 8 channels
» Number of Channel : 1 channel › Output Level : TTL
Simulation

» Measurement Range : 0~200MHz

Software

» Input Characteristics : 0~200MHz(DC Coupled),

GENERAL CHARACTERISTICS
10Hz~200MHz(AC Coupled)
» Sensitivity : 60mV(1Hz~10MHz),
• Input Voltage : AC220V, 50/60Hz
150mVrms(10MHz~200MHz) • Weight : 12.5kg
» Measurement Functions : Period, pulse, width, high/low • Dimension : 479(W) x 194(H) x 416(D)mm
(averaged)
» Min. Pulse Duration : 5ns
Pneumatics
Hydraulics

» Input Noise : < 100μV, Typical

ACCESSORIES
» Coupling : AC or DC(switch selectable)
» Attenuator : x1, x20(switch selectable) • Connection Cord : 1set
» Input Impedance : 1MΩ II 40pF • AC Power Cord : 1ea
» Max. Input Voltage : 250V(DC+AC peak) from 0~440Hz • User’s Manual : 1ea
» Gate Time • Program CD : 1set

www.ed.co.kr 14

Part1. ed_english_catalog1_v1.indd 14 2014-02-25 �� 10:54:37

 • Electricals & Electronics

PC BASED BASIC ELECTRICITY &

ED-1420 ELECTRONICS TRAINER

• 15 experimental modules for basic electricity/electronics and analog & digital circuits
• Capable of real time measurement on PC by linking it to CBIS-1400 model.
• By connecting PC to the Docking station, contact control is implemented on MMI(HMI) based software
• Report on experimental results & electronic manual on PC

> CONFIGURATION
• ED-1420 : PC Based Basic Electricity & Electronics Trainer • Required Systems
» Number of Modules : 15ea » DS-1410 : Docking Station(Option)
» Module Dimension : 290(W) x210(H) x 26(D)mm › Please refer to DS-1410 SPECIFICATION below
» Module Storage Box(2ea) : 596(W) x 318(H) x 255(D)mm » CBIS-1400 : Computer Based Instrument ystem(Option)
› Please refer to page 22 on CBIS-1400 SPECIFICATION
» Computer(Option)

> SPECIFICATION
» DS-1410 Docking Station
• Display : Graphical LCD
• Power Supply
» Fixed Power Supply(DC 5V, ±15V, 500mA)
» Variable AC Voltage(0~50V)
• Variable Resistor : 3 types(1kΩ, 10kΩ, 100kΩ)
• Function Generator : 2CH(10Hz~100kHz), SINE, SQUARE
• System Board : MPU, RELAY, POWER, MUX, Graphical LCD
• Interface : 25pin Connector x 2, RS-232, BNC, B-Jack
• Power Source : AC220V, 50/60Hz
• Dimension : 420(W) x 140(H) x 375(D)mm
• Weight : 6.4kg

15 Part1 Electricals / Electronics / Embedded

Part1. ed_english_catalog1_v1.indd 15 2014-02-25 �� 10:54:37

 • Electricals & Electronics

PC BASED BASIC ELECTRICITY &

ED-1420

Electronics
Embedded

Electricals
ELECTRONICS TRAINER

> SPECIFICATION > Basic Electricity/

Electronics Circuit Experiment
» CBIS-1400 COMPUTER-BASED INSTRUMENT SYSTEM

Renewable
energy &
» M-1 DC Circuit

LED
• P1. Ohm’s Law
• P2. Kirchhoff’s Law
• P3. Serial/Parallel

Communication
IT/
• Digital Storage Oscilloscope
• Variable Power Supply » M-2 AC Circuit
• Digital Multimeter
• Frequency Counter • P1. RL/RC Circuit

Measurement
• Function Generator • P2. LC Resonance
• Multi-function Card

Test&
• P3. Filter Circuit
• Software

» OPERATING SOFTWARE

» M-3 Transformer

Automation

Intelligent
Robot/
• P1. Transformer Turn Ratio
• P2. Step Up/Down
Transformer

• Remote Control Function

» Accessing student’s experiment programs from the

Mechatronics
professor’s experiment program

• Electronic Manual
» Real-time, online report submission and print function
» M-4 Semiconductor - 1
for experiment results
» Report grading function • P1. Diode Characteristics
» Online attendance verification and print function • P2. Zener Diode
• P3. NPN Transistor
• P4. PNP Transistor
Simulation
Software

• Experiment Process
» Experiment circuits and experiment methods
arepresented in detail
» Designed to protect the user and circuit and
preventerror
» M-5 Semiconductor - 2
• Convenience Function
» Teaching is enhanced using the measurement
Pneumatics
Hydraulics

• P1. J-FET Characteristics

instrument on the same screen
• P2. MOS-FET Characteristics
» Practical experiment is possible using PC- • P3. SCR Characteristics
basedmeasurement instrument • P4. SCR Phase Control
» Enrollment of 5 students per system

www.ed.co.kr 16

Part1. ed_english_catalog1_v1.indd 16 2014-02-25 �� 10:54:37

 • Electricals & Electronics

PC BASED BASIC ELECTRICITY &

ED-1420 ELECTRONICS TRAINER

> Analog Circuit Experiment > Basic Electricity/

Electronics Circuit Experiment
» M-6 Transistor Amplifier - 1 » M-11 Pulse Circuit

• P1. Amplifier Biasing • P1. Clipping Circuit

• P2. Common Emitter Amp • P2. Schmitt Trigger
• P3. Complementary Amp • P3. Bistable M.V
• P4. Differential Amp • P4. Monostable M.V

» M-7 OP AMP - 1 »M-12 Fundamental Logic

• P1. Inverting Amp • P1. Diode Logic

• P2. Non Inverting Amp • P2. AND/NAND Gate
• P3. DC Offset • P3. OR/XOR Gate
• P4. Differential Amp • P4. Inverter
• P5. Summing Amp

» M-8 Active Filter - 1 » M-13 Sequential Logic

• P1. Low Pass Filter • P1. RS Flip-Flop

• P2. High Pass Filter • P2. JK Flip-Flop
• P3. Band Pass Filter • P3. Binary Counter
• P4. Shift Register

» M-9 Power Supply » M-14 Combination Logic

• P1. Bridge Circuit • P1. Decoder

• P2. DC Voltage Regulator • P2. Encoder
• P3. Variable Voltage Regulator • P3. Multiplexer/
Demultiplexer
• P4. Adder/Subtracter

» M-10 Oscillator » M-15 Signal Converter

• P1. Phase Shift Oscillator • P1. A/D Converter
• P2. Wien Bridge Oscillator • P2. D/A Converter
• P3. Colpitts Oscillator • P3. F/V Converter
• P4. Hartley Oscillator • P4. V/F Converter

17 Part1 Electricals / Electronics / Embedded

Part1. ed_english_catalog1_v1.indd 17 2014-02-25 �� 10:54:37

 • Electricals & Electronics

ED-1430 PC BASED POWER ELECTRONICS TRAINER

Electronics
Embedded

Electricals
• 5 experimental modules for power electronics covering basic theory and applied experiments
• Capable of real-time measurements on PC by linking it to CBIS-1400 model
• By connecting PC to the Docking station, contact control is implemented on MMI(HMI) based software
• Report on experimental results & electronic manual on PC

Renewable
energy &
LED
Communication
IT/
Measurement
Test&
Automation

Intelligent
Robot/
> CONFIGURATION > Operating Software

Mechatronics
• ED-1430 : PC Based Power Electronics Trainer
» Number of modules : 5ea
» Module dimension : 290(W) x 210(H) x 26(D)mm
» Module storage cabinet(1ea) : 596(W) x 318(H) x 255(D)mm
• Required System
» DS-1410 : Docking Station(Option)
› Please refer to page 24 on DS-1410 SPECIFICATION
» CBIS-1400 : Computer Based Instrument System(Option)
Simulation
Software

› Please refer to page 22 on CBIS-1400 SPECIFICATION

» Computer(Option)

> SPECIFICATION
» Pentium IV or above 1.7GHz or above
• RAM 512M or higher
• Hard Disk Min. 500Mbyte free space
• USB 2.0 compatible
Pneumatics
Hydraulics

• Windows NT4.0/2000/XP/7

» ACCESSORIES
• Connection cord : 1set
• AC Power Cord : 1ea
• Program CD : 1set
• User’s manual : 1ea

www.ed.co.kr 18

Part1. ed_english_catalog1_v1.indd 18 2014-02-25 �� 10:54:38

 • Electricals & Electronics

ED-1430 PC BASED POWER ELECTRONICS TRAINER

> Experimental Modules

» M-21 PHASE CONTROL RECTIFIER

• To understand SCR Gate Driver’s characteristics and SCR phase control methods
• To identify the courses of SCR phase control and each circuit’s status by the phase variation
• To be acquainted with half-wave, full-wave and bridge rectifier circuits
• To learn the peripherals of rectifier circuit and purpose of insertion
• To grasp the rectifier’s efficiency and change by the load variation
• To familiarize the Bridge Rectifier Circuit’s rectification courses and adjacent circuits

» M-22 CHOPPER

• To learn the characteristics and control process of IGBT Gate Driver

• To grasp the operation principles of Boost, Buck, Boost and Buck Chopper Circuits
• To identify the purpose of use and characteristics of Chopper

» M-23 ELECTRISC POWERDEVICE & RECTIFIER

• To be acquainted with each characteristics of power electronics components and

their operation principles
• To learn the SCR, TRIAC and IGBT characteristics and their purpose of use
• To grasp the operation principles of full-wave, halfwave Bridge Rectifier Circuits
and load variations

» M-24 SINGLE PHASE INVERTER

• To illustrate the characteristics and operation principles of the bridge using IGBT
• To familiarize each process of Inverter and its operation principles
• To understand each process of PWM and IGBT Driver’s operation principles
• To learn the circuits adjacent to Inverter and operation principles of each circuitBridge
Rectifier Circuits and load variations

» M-25 AC PHASE CONTROL

• To grasp SCR & TRIAC Driver’s operation principles and familiarize the test points
• To understand the operation principles of AC Phase Control and characteristics of each
element
• To familiarize CYCLO converter’s operation principles, purpose of use and conversion
process
• To identify operation principles of the circuits adjacent to CYCLO Converter and their
purpose of use
• To understand the process and characteristics of phase control by SCR, DIODE and
TRIAC elements

19 Part1 Electricals / Electronics / Embedded

Part1. ed_english_catalog1_v1.indd 19 2014-02-25 �� 10:54:38

 • Electricals & Electronics

ED-1010 BASIC ELECTRICITY & ELECTRONICS TRAINER

Electronics
Embedded

Electricals
• Various types of circuit experiments with 17 basic modules plus 3 optional modules
• Main console(power supply) and storage cabinet

Renewable
energy &
LED
Communication
IT/
Measurement
Test&
Automation

Intelligent
Robot/
> SPECIFICATION
» MAIN CONSOLE » MODULES & MODULE STORAGE CABINET

Mechatronics
• DC Output • No. of Modules : 20ea(including option modules : 3ea)
» 0~20V, 2A(Connector & Terminal Output) • Dimension
» +12V, 1A(Connector & Terminal Output) » (Module) : 310(W) x 32(H) x 220(D)mm
» ±5V, 1A(Connector & Terminal Output) » (Storage cabinet) : 365(W) x 758(H) x 920(D)mm
» ±15V, 1A(Connector Output) • Total Weight : 130kg

• AC Output
» 24V(CT), 0.5A(Connector & Terminal Output)
» 110V, 0.5A(Terminal Output) SYSTEM REQUIREMENT
Simulation
Software

» 220V, 0.5A(Terminal Output)

• IBM PC-compatible 486 or higher
• RAM : 8Mbyte, or higher, VGA : 640x480 or better
• Indication
• PC Operating System : Windows NT, 2000, XP, 7
» Display Range : 0~20V FS AVM, 0~2A FS AAM
» Digital Voltmeter : 20V, 20V FS(2ranges) - 2ea
» Digital Ammeter : 0.2A, 2A FS(2ranges)
ACCESSORIES
• Protection Circuit
Pneumatics
Hydraulics

» AC Output : 12V +12V(24V)(with Reset) • AC Power Cord : 1ea

» DC Output : +12V, +5V, -5V(with Reset) • Patch Cord(including Jumper) : 1set
• Connector Cable(for Module’s power) : 2ea
• Input Voltage : AC 220V, 50/60Hz • Instruction Manual : 1ea
• Dimension : 610(W)x205(H)x190(D)mm
• Weight : 14kg

www.ed.co.kr 20

Part1. ed_english_catalog1_v1.indd 20 2014-02-25 �� 10:54:38

 • Electricals & Electronics

ED-1010 BASIC ELECTRICITY& ELECTRONICS TRAINER

> Operating Software

• Experiment Process
» Experimental circuits and experiment methods for each experiment are
presented in detail.(Connecting Methods between each terminal and the
input signal conditions are explained in detail)
» Experimenters and circuits are protected and measurement errors are
prevented effectively by the teaching the measuring methods and
related precautions.
» Measured Data are recorded in the [experiment results input table].

• Experiment Result Input Table

» Experiment results, problems discovered during experiment or
comments are recorded and presented to the teacher after storing the
data in the floppy disk.
» The recording window can execute automatic line passing and screen
scroll regardless of the length of contents.
» Data are recorded in the floppy disk stored during the environment
setting by the Store command.
» Receives floppy disk from the teacher to check additional instructions or
replies to questions.

> Basic Electricity & Electronics Circuit Experiment (5 Modules)

» M-1 DC Circuit » M-2 Measurement

• P1. Ohm’s Law • P1. DC Volt-meter

• P2. Series/Parallel • P2. V.A.Ω Indicator
• P3. Kirchhoff ’s Law • P3. DC Ampere-Meter
• P4. Galvano-Meter • P4. Ohm-Meter
• P5. Wheatstone Bridge

» M-3 AC Circuit(C&L) » M-4 Transformer

• P1. Capacitance
• P2. Inductance • P1. Mutual Inductance
• P3. RC/RL Circuit • P2. Transformer Turn Ratio
• P4. LC Resonance • P3. Transformer Load
(Series/Parallel) • P4. Step Up/Down Transformer
• P5. Filter Circuit

» M-5 Semiconductor
• P4. NPN Transistor Characteristics
• P1. Diode Characteristics • P5. PNP Transistor Characteristics
• P2. Zener Diode Characteristics • P6. J-FET Characteristics
• P3. SCR Characteristics • P7. MOS-FET Characteristics

21 Part1 Electricals / Electronics / Embedded

Part1. ed_english_catalog1_v1.indd 21 2014-02-25 �� 10:54:38

 • Electricals & Electronics

ED-1010 BASIC ELECTRICITY & ELECTRONICS TRAINER

Electronics
Embedded

Electricals
> Analog Circuit Experiment (6 Modules)
» M-6 Transistor Amplifier » M-7 Op-amp Circuit

Renewable
energy &
LED
• P1. Inverting Amp
• P1. Amplifier Biasing
• P2. DC Offset-1
• P2. Common Emitter Amp
• P3. DC Offset-2
• P3. Darlington Amp
• P4. Non-inverting Amp
• P4. Complementary Amp
• P5. Differential Amp
• P5. Differential Amp
• P6. Summing Amp

Communication
IT/
» M-8 Active Filter » M-9 Power Supply
• P1. Half/Full Rectifier
• P1. Low Pass Filter • P2. Bridge Rectifier
• P2. High Pass Filter • P3. Smoothing Circuit
• P3. Band Pass Filter-1 • P4. Simple Voltage Regulator
• P4. Band Pass Filter-2 • P5. DC Volt. Regulator-1(by Tr. Circuit)

Measurement
• P5. OP-Amp(Aux.) • P6. DC Volt. Regulator-2(by Op-Amp)

Test&
» M-10 Oscillator » M-11 Modulation

• P1. Phase Shift Oscillator • P1. AM Modulation-1

• P2. Wien Bridge Oscillator • P2. AM Detector

Automation
• P3. Colpitts Oscillator • P3. AM Modulation-2

Intelligent
Robot/
• P4. Hartley Oscillator • P4. FM Modulation
• P5. Crystal Oscillator • P5. FM Detector

Mechatronics
> Digital Circuit Experiment (6 Modules)

» M-12 Pulse Circuit » M-13 Digital Logic Circuit

• P1. Clipper
• P2. Schmitt Trigger • P1. Diode Logic
• P3. Bistable Multivibrator • P2. AND/NAND Gate
• P3. OR/NOR Gate, Exclusive OR Gate
Simulation

• P4. Clipper Tr. Inverter

Software

• P5. Monostable Multivibrator • P4. Inverter

• P6. Astable Multivibrator

» M-14 Sequential Logic Circu » M-15 Combination Logic Circuit

Pneumatics
Hydraulics

• P1. RS Flip-flop • P1. Decoder

• P2. JK Flip-flop • P2. Encoder
• P3. Counter(Binary/BCD) • P3. Multi/Demultiplexer
• P4. Shift Register • P4. Half/Full Adder

www.ed.co.kr 22

Part1. ed_english_catalog1_v1.indd 22 2014-02-25 �� 10:54:38

 • Electricals & Electronics

ED-1010 BASIC ELECTRICITY& ELECTRONICS TRAINER

» M-16 Digital Memory » M-17 Signal Converter

• P1. Address Generator
• P2. Display • P1. A/D Converter
• P3. Data Input • P2. D/A Converter
• P4. SRAM • P3. F/V Converter
• P5. DRAM • P4. V/F Converter
• P6. EPROM

> Option Module Experiment(3 Modules)

» M-18 Opto Electronic » M-19 Power Device

• P1. LED • P1. SCR

• P2. Photo Transistor • P2. TRIAC
• P3. Cds • P3. Trigger Circuit
• P4. E/O Converter • P4. Dimmer
• P5. O/E Converter • P5. Phase Control Rectifier

» M-20 DC Servo

• P1. Summing Amp. • P5. Tacho Amp.

• P2. Pre-Amp. • P6. Attenuator
• P3. Servo Driver • P7. Motor & Position Sensing
• P4. Input Control

> Optional Smart Learning NEW

(Contents-running System)
(Interface Board)

Wire LAN

Wireless

RS-232C

Bluetooth

USB (iOS,OSX) (Android) (MS Windows)

Middle ware Web server

USBContents
Any Device Any Computer
Interface

• Smart Learning Contents Interactive with Hardware

• Compatible with All Operating System (iOS, Android, OSX, MS Windows, Linux etc)
• Multi-User Oriented Electronic Book Authoring Tool and Platform (E3) included.

23 Part1 Electricals / Electronics / Embedded

Part1. ed_english_catalog1_v1.indd 23 2014-02-25 �� 10:54:38

 • Electricals & Electronics

ED-2000E BASIC ELECTRICITY& ELECTRONICS TRAINER

Electronics
Embedded

Electricals
• 14 experimental boards with mounting rack and storage cabinet
• Analysis of DC and AC circuits
• Electromagnetics experiments

Renewable
energy &
LED
Communication
IT/
Measurement
Test&
> EXPERIMENTS >EXPERIMENTAL BOARDS(14EA)

Automation

Intelligent
Robot/
• OHM’s Law
NO-01 OHM’s Law
• Series and Parallel Connection of Resistor
• Voltmeter and Voltage Measurements NO-02 Voltmeter
• Amperermeter and Current Measurements NO-03 Amperemeter
• Ohmmeter and Resistance Measurements NO-04 Ohmmeter
• Single-phase Transformer NO-05 Transformer & Voltage Transformation

Mechatronics
• Three-phase Transformer and Δ & Y Connections NO-06 Inductor & Inductance
• Inductance and RL Circuits NO-07 Capacitor & Capacitance
• Series and Parallel Connection of Inductance NO-08 LC Circuit & Resonance
• Capacitance and RC Circuits
NO-09 KIRCHHOFF’s Law
• Series and Parallel Connection of Capacitance
NO-10 Resistance Bridge
• LC Circuit and Characteristics of Resonance
NO-11 3-Phase Transformer Connection
• KIRCHHOFF’s Law
NO-12 Relay & Latch Circuit
• Bridge Circuit
Simulation
Software

• Single-phase Half Wave and Full Wave Rectifications NO-13 ø1 Half & Full Wave Rectifier
• Magnetic Fields and Generation of Electromotive NO-14 Generation of Electromotive Force
Force(EMF) » Mutual Inductance Module : 2ea
• Relay Characteristics » AC ø1 Generator Module : 1ea

ACCESSORIES
Pneumatics
Hydraulics

• Experimental Board Rack(BR-3) • AC Power Cord : 1ea

» 1480(W) x 620(H) x 320(D)mm(Capacity : 3Boards) • Experimental Manual : 1ea
• Board Storage Cabinet(BS-14) • Option Modules
» 670(W) x 850(H) x 490(D)mm(Capacity : 14Boards) » AC ø3 Generator(ACG-03), DC Generator(DCG-02)
• Patch Cord(ø4 Plug) : 1set

www.ed.co.kr 24

Part1. ed_english_catalog1_v1.indd 24 2014-02-25 �� 10:54:39

 • Electricals & Electronics

ED-2000E BASIC ELECTRICITY& ELECTRONICS TRAINER

Each board’s dimension :

420(W) x 302(H) x 47(D)mm

> Optional Smart Learning NEW

(Contents-running System)
(Interface Board)

Wire LAN

Wireless

RS-232C

Bluetooth

USB (iOS,OSX) (Android) (MS Windows)

Middle ware Web server

USBContents
Any Device Any Computer
Interface

• Smart Learning Contents Interactive with Hardware

• Compatible with All Operating System (iOS, Android, OSX, MS Windows, Linux etc)
• Multi-User Oriented Electronic Book Authoring Tool and Platform (E3) included.

25 Part1 Electricals / Electronics / Embedded

Part1. ed_english_catalog1_v1.indd 25 2014-02-25 �� 10:54:39

 • Electricals & Electronics

ED-2040 POWER ELECTRONICS TRAINER

Electronics
Embedded

Electricals
• Cover essential circuits needed to practice power electronics circuits
• Modular type with aluminum carrying case
• Optional rack to be customized upon requst

Renewable
energy &
LED
Communication
IT/
Measurement
Test&
Automation

Intelligent
Robot/
> SPECIFICATION
• SCR : GATE DRIVER IC • IGBT : 600V 50A • Input Voltage
• IGBT : GATE DRIVER IC • SCR : 600V 10A » AC 220V(single-phase) 50/60Hz
• DIODE : 600V 1A • Module Size : 250(W) x 65(H) x 166(D)mm » AC 380V(3-phase) 50/60Hz

Mechatronics
> Experimental Modules
Input Voltage is single-phase 220V or three-phase 380V, but operating voltage in internal circuit is DC24V or AC24V.

» ED-2040-A Single-Phase HalfWave/Full WaveRectification Circuit

To understand the principle and characteristics of Rectification Circuit that converts AC to
DC by using the diode characteristics
Simulation
Software

• Input Voltage : AC 220V • Circuit Voltage : AC24V

• Output Load : Resistance load(3W 500Ω)
• Diode: 600V 1A
• Check Terminal : Input AC waveform, output voltage waveform.

» ED-2040-B 3-Phase Half Wave/Full Wave Rectification Circuit

Pneumatics
Hydraulics

To understand the principle and characteristics of 3-phase Rectification Circuit through the
experiment to obtain DC output from 3-phase AC voltage using the diode characteristics
• Input Voltage : AC 3-phase 380V
• Output Load : 3W 500Ω
• Diode : 600V 1A
• Check Terminal : Measures input AC waveform,output voltage wave, voltage of each phase

www.ed.co.kr 26

Part1. ed_english_catalog1_v1.indd 26 2014-02-25 �� 10:54:39

 • Electricals & Electronics

ED-2040 POWER ELECTRONICS TRAINER

> Experimental Modules

Input Voltage is single-phase 220V or three-phase 380V, but operating voltage in internal circuit is DC24V or
AC24V

» ED-2040-C Single-Phase Half wave/Full Wave Phase Control Circuit

To understand the principle of phase control and characteristics of SCR through the
experiment on SCR characteristics and phase control of Rectification Circuit and Gate
Circuit
• Input Voltage : AC single-phase 220V
• Circuit Voltage : AC24V
• Output Load : 3W 500Ω
• SCR Module : 600V 10A
• Drive IC: SCR Gate Trigger Circuit
• Check Terminal : Measures input AC waveform, output voltage waveform,Trigger Circuit

» ED-2040-D 3-Phase Half wave/Full Wave Phase Control Circuit

To experiment on phase control for SCR characteristics, Gate Circuit and Rectification
Circuit, and Control Output’s average voltage of output
• Input Voltage: AC 3-phase 380V
• Output Load : 3W 500Ω
• SCR Module : 600V 10A
• Drive IC: SCR Gate Trigger Circuit
• Check Termina: l Measures input AC waveform, output voltage waveform, voltage of each
phase Trigger Circuit

» ED-2040-E Buck (Step-down) Converter Circuit

Experiments on how to control DC load with low output voltage using DC voltage as the
power source and characteristic of IGBT which is commonly used as control element and
Drive Circuit
• Input Voltage : AC single-phase 220V
• Output Load : 3W 500Ω
• IGBT : 600V 50A
• Drive IC : IGBT Gate Trigger Circuit
• Check Terminal : Measures input voltage, current waveform, output voltage waveform
and Trigger Circuit

» ED-2040-F Boost (Step-up) Converter Circuit

Experiments on how to control DC load with low output voltage using DC voltage as the
power source and characteristic of IGBT which is commonly used as control element and
Drive Circuit
• Input Voltage : AC single-phase 220V
• Output Load : 1/2W 2000Ω
• IGBT : 600V 50A
• Drive IC : IGBT Gate Trigger Circuit
• Check Terminal : Measures input voltage, current waveform, output voltage waveform
and Trigger Circuit

27 Part1 Electricals / Electronics / Embedded

Part1. ed_english_catalog1_v1.indd 27 2014-02-25 �� 10:54:39

 • Electricals & Electronics

ED-2040 POWER ELECTRONICS TRAINER

Electronics
Embedded

Electricals
> Experimental Modules
» ED-2040-G PWM Wave Voltage Inverter Circuit
Experiment to acquire AC output which is more closer to sine wave by providing the control output for

Renewable
energy &
converting DC voltage to AC voltage in the form of PWM

LED
• Input Voltage : AC single-phase 220V
• Circuit Voltage : DC24V • Output Load : 3W 500Ω
• IGBT : 600V 50A • Drive IC : IGBT Gate Trigger Circuit
• Check Terminal : Measures input voltage, current waveform, output voltage waveform
and Trigger Circuit

Communication
» ED-2040-H Square Wave Voltage Inverter Circuit

IT/
Experiment on AC load by authorizing the control signal for converting the current voltage to AC voltage
as square wave
• Input Voltage : AC single-phase 220V
• Circuit Voltage : DC24V • Output Load : 3W 500Ω
• IGBT : 600V 50A
• Drive IC : IGBT Gate Trigger Circuit
• Check Terminal : Measures input voltage, current waveform, output voltage waveform

Measurement
and Trigger Circuit

Test&
» ED-2040-I Single Phase Cyclo Converter Circuit
Experiment on the frequency converter converting the AC power of input frequency to the other AC
power directly
• Input Voltage: AC single-phase 220V
• Circuit Voltage : AC24V • Output Load : 3W 500Ω
• SCR : 600V, 10A

Automation

Intelligent
• Drive IC: SCR Gate Trigger Circuit

Robot/
• Check Terminal : Measures input voltage, current waveform, output voltage waveform and Trigger
Circuit

» ED-2040-J Single phase AC Controller Circuit

Experiment on AC output control by changing the voltage value through the control of phase when the
induction motor and AC output are required

Mechatronics
• Input Voltage : AC single-phase 220V
• Output Load : 3W 500Ω
• Drive IC: SCR Gate Trigger Circuit
• SCR : 600V, 10A
• Check Terminal : Measures input voltage, current waveform, output voltage waveform
and Trigger Circuit

NEW
> Optional Smart Learning
Simulation
Software

(Contents-running System)
(Interface Board)

Wire LAN

Wireless

RS-232C

Bluetooth
Pneumatics

USB
Hydraulics

Middle ware Web server (iOS,OSX) (Android) (MS Windows)

USBContents
Any Device Any Computer
Interface
• Smart Learning Contents Interactive with Hardware
• Compatible with All Operating System (iOS, Android, OSX, MS Windows, Linux etc)
• Multi-User Oriented Electronic Book Authoring Tool and Platform (E3) included.

www.ed.co.kr 28

Part1. ed_english_catalog1_v1.indd 28 2014-02-25 �� 10:54:39

 • Electricals & Electronics

ED-4010 SEQUENCE CONTROL TRAINER - AC

• Realistic arrangement of materials used for contact sequence

• Indication of each element’s symbol on the panel

> EXPERIMENTS
• Basic Circuit • Alarm and Indication Circuits • Normal and Counter Operating Circuit
• Logic Circuit • Multi-Contact Relay’s Sequence Circuit • Delay Starting Circuit
• Magnetic Circuit • Direct Starting at 1 Position • Limited Operating Circuit
• Timer Circuit • Direct Starting at 2 Positions • Y-Δ starting Circuit
• Preceding Circuit • Reactor Starting
• Detection Circuit • Local Acting Circuit

> SPECIFICATION
• No Fuse Braker(NBF) • Flicker Time Relay
» 3-phase/380V 30A : 1ea » AC 220V 6sec(Contact : 1c) : 1ea
• Magnet Switch • Terminal Block
» 3-phase/220V 20A(Contact : 5a, 2b) : 3ea » 6 Terminals(U, V, W, X, Y, Z) : 1ea
• Overload Relay • AC Motor
» 3-phase/220V 9A(Contact : 1a, 1b) : 2ea » 3-phase 220V/220V(Y-Δ starting ) : 1ea
» For Motor’s overload and open-phase prevention • Reactor
• AC Relay » 3-phase/220V Low-voltage AC motor starting : 1ea
» AC 250V 3A(Contact : 4c) : 2ea • Efficiency Selection Switch
» AC 250 V3A(Contact : 2c) : 3ea
» Selects the reactor’s efficiency(50, 65, 80, 95%) : 1ea
• Alarm Buzzer
• Fuse
» AC 250V : 1ea
» 4A : 1ea
• Emergency Switch
» AC 250V 6A(Contact : 1a, 1b) : 1ea
• Select Switch
» AC 250V 6A(Contact : 1a, 1b) : 1ea ACCESSORIES
• Push Button
» AC 250V 6A(Contact : 1a, 1b) : 4ea • 3-phase AC Power Cord : 1ea
• Pilot Lamp • Dust Cover : 1ea
» Red : 3ea, Green : 2ea • Test Cord : 1set
• Time Relay
• Experimental Manual : 1ea
» AC 220V 60sec(Contact : 1c) : 1ea

29 Part1 Electricals / Electronics / Embedded

Part1. ed_english_catalog1_v1.indd 29 2014-02-25 �� 10:54:40

 • Electricals & Electronics

ED-4010DC SEQUENCE CONTROL TRAINER - DC

Electronics
Embedded

Electricals
Renewable
energy &
LED
Communication
IT/
Measurement
Test&
> FEATURES

Automation

Intelligent
Robot/
• Since the experiments could be done by placing the relay sequence parts on a plate and wiring them with given wires, the time
is saved and the loss of component will be reduced.
• Each device is graphically symbolized according to Korean Standard(KS).
• Relay, timer etcs are used as socket types so that they could be changeable if necessary.
• A extendable plug type lead wires are used for several connections in one place.
• Terminal for load is a terminal block type for the easy connection of an electric heater, motors and etc..

Mechatronics
> SPECIFICATION • Contents of experiment
» Basic circuit
• Front panel
» Logic circuit
» N.F.B SWITCH(30A)1 piece
» Self-holding circuit
» MAGNET SWITCH(20A,5a2b)3 pieces
» Timer circuit
» RELAY(24V,8P)3 pieces
» Interlock circuit
» RELAY(24V,14P)2 pieces
» Detection circuit
» MOTOR(24V/180RPM)1 piece
» Indication and alarm circuit
Simulation

» TIMER (24V,11P)1 piece

Software

» 1-place direct-on-line start

» SELECT SWITCH1 piece
» 2-place direct-on-line start
» PUSH SWITCH 4 pieces
» Reactor start
» LAMP 5 pieces
» Inching circuit
» BUZZER 1 piece
» Forward-reverse operation circuit
» EMS SWITCH 1 piece
» Delayed start circuit
» FUSE (10A) 1 piece
» Time-delayed operation circuit
» TERMINAL BLOCK (6P) 1 piece
Pneumatics

» GCP 1 piece
Hydraulics

ACCESSORIES
• Supply voltage : 220V AC, 50~60Hz
• AC power cord : 1 piece
• Dimension • Operation manual : 1 copy
» 800(W)x 500(D)x 330(H)mm • Connecting wire : 1 set

www.ed.co.kr 30

Part1. ed_english_catalog1_v1.indd 30 2014-02-25 �� 10:54:40

 • Electronics Circuit

ED-2300 ELECTRONICS DEMONSTRATION SYSTEM

• 24 Experimental Boards in two sections : (A) Semiconductor and (B) Electronic Circuit
• Experimental Board rack and board storage cabinet

> EXPERIMENTAL BORDS

Semiconductor Boards(12ea) Electronic Circuit Boards(12ea)
No-2301A : Diode and Zener Characteristics No-2313B : Active Filter Circuit
No-2302A : Transistor Characteristics No-2314B : Unregulated Power Supply
No-2303A : FET Characteristics No-2315B : DC Voltage Regulator
No-2304A : SCR Characteristics No-2316B : Variable Voltage Regulator
No-2305A : UJT Characteristics No-2317B : Tank Circuit/Resonance
No-2306A : SCR/TRIAC/SBS Trigger No-2318B : Oscillator
No-2307A : LED/PHOTO Device No-2319B : Crystal Oscillator
No-2308A : Base/Emitter Ground Amplifier No-2320B : Wien Bridge Oscillator
No-2309A : DC Amplifier No-2321B : Multivibrator/Schmitt Trigger
No-2310A : Complementary Amplifier No-2322B : Timer IC Application
No-2311A : Differential Amplifier No-2323B : Ramp Generator
No-2312A : Operational Amplifier No-2324B : Modulation and Demodulation

> SPECIFICATION
EXPERIMENTAL BOARD RACK(BR-3) : 1ea BOARD STORAGE CABINET(BS-12) : 2ea
• Installation Capacity : 3ea • Storage Capacity : 13ea per cabinet
• Dimension : 1480(W) x 620(H) x 320(D)mm • Dimension : 680(W) x 1080(H) x 450(D)mm
AUXILIARY MOUDLES : 2ea AUXILIARY MOUDLES : 2ea
• No-2300-1(RC Components) : • No-2300-1(RC Components) :
» Decade Capacitor : 3digits x 2ea » Decade Capacitor : 3digits x 2ea
» Decade Resistor : 2digitsx2ea » Decade Resistor : 2digitsx2ea
» VR : 1kΩ(5W), 100kΩ(1W)
ACCESSORIES OPTION
• No-2300-2(Signal Source) :
» AF Output : 10Hz~100kHz • Patch Cord(ø4 Plug Type) : 1set • DC power suppy :
» Output : 1/10V & variable • AC Power Cord : 2ea ED-333T
» AC Output : 30V CT(15V+15V) • Experimental Manual : 1ea
• Operation Manual : 1ea
• Dimension : 90(W) x 302(H) x 80(D)mm

31 Part1 Electricals / Electronics / Embedded

Part1. ed_english_catalog1_v1.indd 31 2014-02-25 �� 10:54:40

 • Electronics Circuit

ED-2200 ANALOG LAB UNIT

Electronics
Embedded

Electricals
• AF Generator and Frequency Counter(built-in)
• Dual DC Power Supply(5/6V, 9/12/15V)
• Decade Capacitor(2 digits) and Programmable Resistor

Renewable
energy &
LED
Communication
IT/
Measurement
Test&
Automation

Intelligent
Robot/
> SPECIFICATION

Mechatronics
• DC Output : 5/6V(0.7A), 9/12/15V(0.4A) Dual Output
ACCESSORIES
• AC Output : AC 30V, CT(15V+15V) 100mA
• Audio Generator : 100Hz~10kHz(2 Ranges) • Bread Board Socket Strip(630 Hole) : 2ea
• AF Output : 100mV~1V(Decade Att.Control) • Bus Strip(100 holes) : 3ea
• Programmable Resistor : 10kΩ~150kΩ, 100kΩ~1.6MΩ • Jump Wire(5-color) : 1set
• Decade Capacitor • AC Power Cord : 1ea
» 0.001μF~0.1μF 2digits • Operating Manual : 1ea
Simulation
Software

(0.001μF~1μF 3digits “B” type only)

• Variable Resistor : 1kΩ, 100kΩ(2ea)
• Control Switch : 1-slide, 1-toggle, 1-push OPTION
• Current Meter : 0~10mA/100mA(2 ranges)
• Speaker : 8Ω 1W(Max.) • Component Box CS-102
• Protection : DC Overload Alarm & Indication
• Input Voltage : AC 220V, 60Hz
Pneumatics
Hydraulics

• Dimension : 350(W) x 85(H) x 355(D)mm

• Weight : 4.1kg

www.ed.co.kr 32

Part1. ed_english_catalog1_v1.indd 32 2014-02-25 �� 10:54:40

 • Electronics Circuit

ED-5060 SCR TRAINER

• SCR characteristics
• Rectifier and phase control
• Trigger and gate control
• Motor speed control

> EXPERIMENTAL MODULES

1. Characteristics of SCR(U-5060A) 6. Battery Auto Charger(U-5060F)
2. Rectifier and Phase Control(U-5060B) 7. DC to AC Inverter Circuit(U-5060G)
3. Trigger and Gate Control-1(U-5060C) 8. Motor Speed Control(U-5060H)
4. Trigger and Gate Control-2(U-5060D) 9. DC Regulator Circuit(U-5060J)
5. Photo Control Circuit(U-5060E)

> SPECIFICATION
CONSOLE(MAIN FRAME) ED-5060(P) • Dimension : 610(W) x 210(H) x 195(D)mm
• Load Resistor • Weight : 11.2kg
» 100Ω~1100Ω • Dimension of Module : 250(W) x 65(H) x 166(D)mm
» 200Ω(50W) : 2ea, 300Ω(30W) : 1ea, 400Ω(30W) : 1ea • System Weight : 20kg
• Load Lamp : AC 110V, 10W
• DC Motor : 12V 4000RPM Max.(Tacho Generator Section)
• Metering ACCESSORIES
» DC Range : INT, 50/150V
» AC Range : 50/150V • Patch Cord(ø2 Plug) : 1set
• DC Output : 0~25V Continuous Variable 1A • AC Power Cord : 1ea
• AC Output : Overload Protection 1A Max. • Module Power Cord : 2ea
• Input Voltage : AC 220V, 50/60Hz • Experimental Manual : 1ea

33 Part1 Electricals / Electronics / Embedded

Part1. ed_english_catalog1_v1.indd 33 2014-02-25 �� 10:54:40

 • Electronics Circuit

ED-5060 SCR TRAINER

Electronics
Embedded

Electricals
> BASIC MODULE
U-5060A Characteristics of SCR U-5060B Rectifier and Phase Conrol
• SCR in DC circuit : Gate current, • Phase control, half wave

Renewable
Turn ON/OFF by Anode and rectification characteristics

energy &
Cathode • Phase control, full wave

LED
• U SCR in AC circuit : SCR’s rectification characteristics
rectification characteristics,
ON/OFF operation by Gate
control

Communication
U-5060C Trigger and Gate Control-1 U-5060D Trigger and Gate Control-2

IT/
• UJT Oscillation Trigger Circuit :
• P1. Transformer Turn Ratio Trigger circuit experiment by
• P2. Step Up/Down Transformer Relaxation Oscillator which is
widely used in SCR phase control
• Two-way Trigger Circuits by Diac

Measurement
U-5060E Photo Control Circuit U-5060F Battery Auto Charger

Test&
• Application of insulation control • Automatic battery charging
non-contact switch circuit by SCR and sensing
• SCR control by Photo Coupler adjustment

Automation

Intelligent
Robot/
U-5060G DC to AC Inverter Circuit U-5060H Motor Speed Control
• Inverter experiments by SCR • SCR Chopper experiments :
Principles of widely used Jones
Chopper and DC Motor speed
control

Mechatronics
U-5060J DC Regulator Circuits
• DC constant voltage supply
circuit by SCR
Simulation
Software

> Optional Smart Learning NEW

(Contents-running System)
(Interface Board)

Wire LAN

Wireless

RS-232C

Bluetooth
Pneumatics
Hydraulics

USB (iOS,OSX) (Android)

Middle ware Web server (MS Windows)

USBContents
Any Device Any Computer
Interface
• Smart Learning Contents Interactive with Hardware
• Compatible with All Operating System (iOS, Android, OSX, MS Windows, Linux etc)
• Multi-User Oriented Electronic Book Authoring Tool and Platform (E3) included.

www.ed.co.kr 34

Part1. ed_english_catalog1_v1.indd 34 2014-02-25 �� 10:54:41

 • Electronics Circuit

ED-6000 OP-AMP CIRCUIT TRAINER

• OP-Amp. characteristics and various appplication circuits

• Main Frame contains DC Power Supply, AF Signal and Frequency Counter

> EXPERIMENTS
• Current to Voltage Converter • Logarithmic Amp.
• Characteristic of OP-Amp. • Voltage to Current Converter • Anti-log Amp.
• Non-inverting Amp. • Feedback Circuit • Sine, Cosine Wave Oscillator
• Inverting Amp. • Differentiator Circuit • Triangle, Square Wave Oscillator
• Voltage Follower • Integrator Circuit • Low-pass Filter
• Summing Amp. • Comparator • High-pass Filter
• Difference Amp. • Peak Detector • Band-pass Filter
• Offset Current and Voltage • Precision Rectifier • Bread Boarding Experiment
• Constant Current Source

> SPECIFICATION
EXPERIMENTAL MODULE(7ea) MAIN FRAME ED-2200(U)
• NO-6011(1ea) : OP-AMP Characteristics • DC Output : 5/6V, 9/12 /15V(Dual Output)
• Decade Capacitor : 0.001~0.1μF(2 digits)
• NO-6012(1ea) : Basic Linear Amp • Prog. Resistor : 10kΩ~1.5MΩ(2-BCD)
• NO-6013(1ea) : Differentiator and Integrator • Variable Resistor : 1/100kΩ(2ea)
• NO-6014(1ea) : Voltage and Current Circuit • Current : 0~10mA/100mA(2 ranges)
• NO-6015(1ea) : Non-Linear Signal Processing • Protection : DC overload alarm & indication
• Speaker : 8Ω, 1W
• NO-6016(1ea) : Generator
• Input Voltage : AC 220V, 50/60Hz
• NO-6017(1ea) : Active Filter • Dimension : 350(W)
• Bread Board
» Socket Strip(630 holes) : 2ea ACCESSORIES
» Bus Strip(100 holes) : 3ea
• Jumper Wire(5-color) : 1set
• Module Size : 198(W) x 14(H) x 108(D)mm • Operating Manual : 1ea
• System Weight : 12kg • Experimental Manual : 1ea

35 Part1 Electricals / Electronics / Embedded

Part1. ed_english_catalog1_v1.indd 35 2014-02-25 �� 10:54:41

 • Logic Circuit

ED-1000BS LOGIC LAB UNIT

Electronics
Embedded

Electricals
• Hi/Lo Logic Switch • Voltage and current meter
• BCD hexadecimal indication LED • DC overload alarm and indication
• Built-in DC power supply(+5V,+9V,±15V) • Variable and single pulse generator

Renewable
energy &
LED
Communication
IT/
Measurement
Test&
Automation

Intelligent
Robot/
> SPECIFICATION
• DC Output : 5V / 9V 0.5A ±15V 50mA
ACCESSORIES

Mechatronics
• BCD Display
• Jumper Wire(5-color) : 1set
• AC Power Cord : 1ea
• Indication Polarity • Instruction Manual : 1ea
» Anode / Cathode selectable common mode
» 1Hz~999Hz ,1kHz~999kHz(H : 4.5V, L : 0.2V approx.)
• Clock Pulse Output : PLL 3 digits, Toggle, 1Hz, 10Hz
OPTION
• Logic Switch : 11 Toggle, 2 Push Switch
Simulation
Software

• Control Switch : 1 Push Switch Floating Contact

• Component Box CS-102
• Single Pulse Generator : 1 Push Switch
• Buzzer : Low Power Driver(+3V~7V 1mA or Less)
• Bread Board
» Socket Strip(630 holes) : 3ea, Bus Strip : 4ea
• Dimension : 350(W) x 85(H) x 355(D)mm
• Weight : 4.3kg
Pneumatics
Hydraulics

www.ed.co.kr 36

Part1. ed_english_catalog1_v1.indd 36 2014-02-25 �� 10:54:41

 • Logic Circuit

ED-1440T/C LOGIC/DIGITAL DEMONSTRATION SYSTEM

• Individual module is capable of performing • Logic Monitoring functions

• Graphical presentation of functional diagram on each module
• Modules are available in TTL or CMOS IC Type
• Module rack contains power and ground bus

> EXPERIMENT MODULES (15ea)

LOGIC FUNCTION TTL IC Q’TY CMOS IC Q’TY
2-INPUT AND GATE 7408 1 4081 1
2-INPUT OR GATE 7432 1 4071 1
2-INPUT NAND GATE 7400 2 4011 2
2-INPUT NOR GATE 7402 1 4001 1
HEX. INVERTER 7404 1 4069 1
3-INPUT NAND GATE 7410 1 4023 1
3-INPUT NOR GATE - - 4025 1
EXCLUSIVE OR GATE 7486 1 4070 1
J-K FLIP-FLOP 7476 2 4027 2
D-FLIP-FLOP 7474 2 - -
BCD TO DECIMAL DECODER 7442 1
BCD TO 7-SEG. LATCH/DECODER - -
BCD UP/DOWN COUNTER - - 4511 1
8-BIT, P-OUTPUT/S-IN SHIFT REGISTER 74164 1 4510 1
DUAL 4-BIT STATIC SHIFT REGISTER - - - -1
LOGIC SUPPORT UNIT (8 keys, 1 clock, 7-seg. LED) 1 4015

37 Part1 Electricals / Electronics / Embedded

Part1. ed_english_catalog1_v1.indd 37 2014-02-25 �� 10:54:41

 • Logic Circuit

ED-1440T/C LOGIC/DIGITAL DEMONSTRATION SYSTEM

Electronics
Embedded

Electricals
> SPECIFICATION
MODULE RACK (MR-8)

Renewable
ACCESSORIES

energy &
• Module Installation Capacity : 8ea

LED
• Power Supply Bus (DC) : 2 Lines and a Ground
• Rack Dimension : Approx : 1100(W) x 640(H) x 300(D)mm • Patch Cords (ø4 Plug) : 1set
• Operating Manual : 1ea
SUPPORT MODULE • Experimental Manual : 1ea
• Indication • Experimental Rack(MR-8) : 1ea
» Level Indication LED : 7ea

Communication
» 7-Segment LED : 1ea (at Support module)
• Input Support

IT/
» Level Input Switch : 8ea
OPTION
» Single Pulse Button : 1ea
» 0~100kΩ (VR) : 1ea
• DC Power Supply ED-333T
• Logic Module
» TTL : 14ea (or CMOS : 14ea)
• Module size : 250(W) X 65(H) X 166(D)mm
• Input Voltage :

Measurement
» TTL : DC 5V, CMOS : DC 5~15V

Test&
Automation

Intelligent
Robot/
Mechatronics
Simulation
Software
Pneumatics
Hydraulics

www.ed.co.kr 38

Part1. ed_english_catalog1_v1.indd 38 2014-02-25 �� 10:54:41

 • Logic Circuit

ED-6400 PULSE CIRCUIT TRAINER

• Modular system with experimental rack

• Pulse Generation, synthesis and conversion
• Built-in signal source and DC power supply

> Experiment Wave Forms(Example)

Square Wave Pulse Ramp Differentiation

> EXPERIMENT MODULES

MODULE CIRCUIT Q’TY MODULE CIRCUIT Q’TY
NO-6401 Differentiation/Integrating Circuit 1ea NO -6406 Astable Multivibrator 1ea
NO-6402 Clamping/Clipping Circuit 1ea NO-6407 Monostable Multivibrator 1ea
NO-6403 Gate/Inverter Amps. 1ea NO-6408 Bistable Multivibrator 1ea
NO-6404 Miller/Boot-strap Circuits. 1ea NO-6409 Signal Source & DC Power Supply 1ea
NO-6405 Schmitt Trigger Circuit 1ea

39 Part1 Electricals / Electronics / Embedded

Part1. ed_english_catalog1_v1.indd 39 2014-02-25 �� 10:54:41

 • Logic Circuit

ED-6400 PULSE CIRCUIT TRAINER

Electronics
Embedded

Electricals
> SPECIFICATION
SIGNAL SOURCE & DC POWER SUPPLY(NO-6409) ACCESSORIES

Renewable
• Output Frequency : 100Hz, 1kHz

energy &
• Output : 0~10Vp-p(Sine and square wave) • Patch Cord : 1set

LED
• One-Shot Output : Positive and negative pulse • AC Power Cord : 1ea
• Logic Switch : 2-switch control • Experimental Manual : 1ea
• Indicators : 3-LED(built-in Driver Amp) • Experimental Rack(MR-8) : 1ea
• DC Output : +12V(0.5A), -12V(0.3A)
• DC Protection : Overload Protected

Communication
• Input Voltage : AC 220V, 50/60Hz
• Dimension : 260(W) x 64(H) x 166(D)mm

IT/
EXPERIMENTAL RACK(MR-8)
• Module Mounting Capacity : 8ea
• Power Supply Bus(DC) : 2-Line(+, -) and GND
• Dimension : 1100(W) x 640(H) x 300(D)mm

MODULES & SYSTEM CASE

Measurement
• No. of Experimental Modules : 8ea

Test&
• Module Dimension : 250(W) x 64(H) x 166(D)mm
• System Case Dimension : 550(W) x 200(H) x 461(D)mm
• System Weight : Approx. 16kg

Automation

Intelligent
Robot/
Mechatronics
Simulation
Software
Pneumatics
Hydraulics

www.ed.co.kr 40

Part1. ed_english_catalog1_v1.indd 40 2014-02-25 �� 10:54:41

 • Sensor/Interface Conversion

ED-6800B SENSOR APPLICATION TRAINER

• Various types of sensor such as temperature, photo, pressure, hall and proximity
• Signal detection, signal amplification and signal conversion
• OP AMP & Comparator, AD/DA Converter

> EXPERIMENTS > SPECIFICATION

• Sensor AMP & Comparator GENERAL CHARACTERISTICS
» Inverting, Non-inverting and Differential Amplifiers • Module’s Dimension : 250(W) x 65(H) x 166(D)mm
» Comparator Circuit • System Weight : 27kg
» Voltage and Current CirQcuit
• A/D & D/A Converter
» Analog to Digital Converter
» Digital to Analog Converter ACCESSORIES
• Temperature
» Thermocouple and Thermistor • Thermocouple Probe : 1ea
» Temperature Control
• Cds Probe : 1ea
• Photo
» LED & Photo Transistor • LED Probe : 1ea
» CdS Switch & Photo Coupler • Lamp Probe : 1ea
• Rotary Encoder • Ultrasonic TX Probe : 1ea
» Angular Speed and Direction Detection • Thermistor Probe : 1ea
» RPM and Angle Detection • Photo Transistor Probe : 1ea
• Ultrasonic & Resonance • Alcohol Thermometer : 1ea
» Ultrasonic Wave’s Transmission and Reception • Shock Sensor Unit : 1ea
» Shock Sensor and Resonance Characteristics
• Data Cable : 1ea
• Other Sensors
» Pressure Sensor • Handy Air Compressor : 1ea
» » Hall Sensor • AC Power Cord : 1ea
» Proximity Sensor • Patch Cord(ø2 Plug) : 1ea
• Sensor Switches • Experimental Manual : 1ea
» Reed Switch, Mercury Switch, Limit Switch

Alcohol Thermometer

Temp. Sensor(6800B : 1~2) Photo Sensor(6800B : 3~5) Ultrasonic Transducer Shock Sensor

41 Part1 Electricals / Electronics / Embedded

Part1. ed_english_catalog1_v1.indd 41 2014-02-25 �� 10:54:42

 • Sensor/Interface Conversion

ED-6800B SENSOR APPLICATION TRAINER

Electronics
Embedded

Electricals
> EXPERIMENT MODULES

» OU-6801 Operational Amplifier Unit

Renewable
energy &
LED
• OP AMP & COMPARATOR
» Amp. Circuits : 2 OP-Amp
» Coupling Modes : AC & DC
» Amplifier Modes : Inverting, Non-inverting Difference, Comparator
» DC-offset Control : -15V~0~+15V
» DC Output : ±15V, 0.3A(for sensor unit)

Communication
» Input Voltage : AC 220V, 50/60Hz

IT/
» CU-6802 A/D CONVERTER
• A/D Conversion : Successive type
• Analog Input : 0~10V DC
• Digital Output : 8bits TTL Level

Measurement
» Conversion Speed : Approx. 100μs
• D/A CONVERTER

Test&
» D/A Conversion Circuit : Circuit Current Summing
» Digital Input : 8bits TTL Level
» Analog Outpt : 0~10V DC
» DC Output : ±15V, 0.3A(fo r sensor unit)
» Input Voltage : AC 220V, 50/60Hz

Automation
» SU-6803 TEMPERATURE SENSOR

Intelligent
Robot/
• Detection Circuit : Wheatstone Bridge
• Temperature Source : Heater and cooler by fan
• Resistance Sense : 50Ω~5kΩ
• Heater Control Input : H-Level(DC 5~15V)
• Cooler(Fan) Control Input : H-Level(DC 5~15V)
• Sensor Device : Thermocouple & Thermistor
• Input Voltage : DC ±15V, 1A

Mechatronics
» SU-6804 PHOTO SENSOR
• Photo Bias Level : DC 0~30mA
• AC Bias Frequency : 100Hz~10kHz(with Digital Counter)
• Photo Sensing Range : 0~200mm variable distance
• Photo Coupling Speed : 0~1000 pulse/sec
• Sensor Device : LED, Photo-transistor, CdS
Simulation
Software

• Input Voltage : DC ±15V, 1A

» SU-6805 ROTATION SENSOR

• Input Voltage : DC 5V
Pneumatics
Hydraulics

• Output Waveform : Square Wave

• Output Phase : A, B
• Resolution : 100 pulse/rotation
• Response : 25kHz
• Input Voltage : DC ±15V, 1A

www.ed.co.kr 42

Part1. ed_english_catalog1_v1.indd 42 2014-02-25 �� 10:54:42

 • Sensor/Interface Conversion

ED-6800B SENSOR APPLICATION TRAINER

> EXPERIMENT MODULES

» SU-6806 ULTRASONIC SENSOR
• ULTRASONIC SENSOR
» Nominal Frequency : 40kHz » Sensitive Level : More than -67dB
» Receiving BW : 6kHz(-74dB) » Transmitter Level : More than 110dB
• VIBRATION
» Frequency Response : 10Hz~1kHz » Sensor Output : 40mV/1G(Approx)

» SU-6807 GAS SENSOR » SU-6808 HUMIDITY SENSOR

• Circuit Voltage • Operating Humidity Range:
Vc : 24V Max.(AC or DC) 30~90% R.H.
• Heater Voltage Vh : 5V(AC or DC) • Operating Temp. Range :
• Detecting Gas : LPG, LNG, Methane 0~60˚C
• Sensing Range : 500~10,000 ppm • Output :
• Name Of Type :TGS-813(FIGARO) DC 1~3V(at 30~90% R.H.)
• Input Voltage : DC ±15V, 1A • Name of Type : SYH-2
• Input Voltage : DC ±15V, 1A

» SU-6809 Pressure / Proximity / Hall Sensor

• PRESSURE SENSOR
» Measuring Range : 0~1kg/cm2
» Maximum Input : 2kg/cm2
» Output : Approx. 1~5V
• PROXIMITY SENSOR
» Sensing Distance : 0 ~ 5mm, » Sensing Object : Magnetic substance
» Response Frequency : 500Hz
• HALL SENSOR
» Material : GaAs, Hall Voltage : 55~140mV, » Input Resistance : 450~900Ω

» CU-6810 SENSOR SWITCH

• Reed Switch
» Contactor : SPST » Contact Current : 0.1A(24V)
• Mercury Switch
» Contactor : SPST » Contact Current : 1A(250V)
• Limit Switch
» Contactor : SPDT » Contact Current : 2A(250V)
• Linear movement
» Moving Distance : 80mm » Driving Motor : 0~60rpm
• Input Voltage : DC ±15V, 1A

> Optional Smart Learning NEW

(Contents-running System)
(Interface Board)

Wire LAN

Wireless

RS-232C

Bluetooth

USB (iOS,OSX) (Android) (MS Windows)

Middle ware Web server

USBContents
Any Device Any Computer
Interface
• Smart Learning Contents Interactive with Hardware
• Compatible with All Operating System (iOS, Android, OSX, MS Windows, Linux etc)
• Multi-User Oriented Electronic Book Authoring Tool and Platform (E3) included.

43 Part1 Electricals / Electronics / Embedded

Part1. ed_english_catalog1_v1.indd 43 2014-02-25 �� 10:54:42

 • Sensor/Interface Conversion

ED-6830 SENSOR TRAINER FOR FACTORY AUTOMATION

Electronics
Embedded

Electricals
• Integrated sensor training system covering electricity, electronics, automation and chemistry
• Consists of 24 sensor modules, 8 application modules, 5 conversion modules, 2 signal prossing
modules, 11 pneumatic components and power supply
• PC-based control for convenient, effective data collection and analysis

Renewable
energy &
• Application module experiments(illumination, pneumatic automatic cooler, motor, temperature) for

LED
enhancing field experiences

Communication
IT/
Measurement
Test&
Automation

Intelligent
Robot/
> EXPERIMENTS
Signal Processing Module DAQ, Signal Conditioner 2ea

Mechatronics
1.Mechanical Sensor(4ea) 2.Optical Sensor(6ea) 3.Magnetic Sensor (2ea) 4.Temperature
Sensor Module 24ea
Sensor(4ea) 5.Sound Sensor(2ea) 6.Proximity Sensor (3ea) 7.Chemical Sensor(3ea)
Conversion Module Temperature, Distance, Lighting, Chemistry, Acoustic 5ea
Application Module Amp, Motor Speed Control, Lamp & Buzzer, Counter, Illumination, Pneumatic, Temperature, Motor 8ea
Power Supply 8A, 24V 1ea
Pneumatic Set Low Pressure Valve and 10 types of pneumatic parts 11ea
Test Materials Set, Slide Unit, Load Set, Circuit Link Cable, DMM, Work Table (Including Storage
Experimental Materials
Simulation

6ea
Software

Cabinet)
Experimental Manual : 1ea, Program CD : 1copy
Accessories
Circuit Link Cable : 1set, Serial Cable : 1ea
Pneumatics
Hydraulics

www.ed.co.kr 44

Part1. ed_english_catalog1_v1.indd 44 2014-02-25 �� 10:54:42

 • Sensor/Interface Conversion

ED-6830 SENSOR TRAINER FOR FACTORY AUTOMATION

PART1. Mechanical Sensor(4ea)

Experiments
• Output characteristics of Pressure Sensor by pressure change
• Output characteristics of Load Cell by load change
• Output characteristics of Acceleration Sensor by acceleration change
• Operation principles of Flow Range Sensor by flow range alteration
• Dynamics and relationship between pressure and load

Main Components
• Data Acquisition Module(ED-6831)
» A/D, D/A Converter(built-in)
» capable of PC interface by serial communication
• Signal Conditioner(ED-6832) : 8 ranges, output terminals for the application
modules
• OP Amp. Module(AM6900-38) : Wheatstone Bridge Circuit(built-in)
• Semiconductor-type Pressure Sensor(PS6830-1) : Voltage output type
• Load Cell(LC6900-30) : Capable of homogeneous load supplies(Planger)
• Acceleration Sensor Module(AS6830-2) : 1-axis Acceleration Sensor capable of
measuring acceleration direction and dimension
• Flow Range Sensor(FS6830-3) : Voltage output type & use of propeller’s rotary
power
• Load Set(LS6900-32) : 10ea(1kg per load)
• Pneumatic Cylinder(PS-2550) & Pneumatic Set(including Low Pressure Valve)

PART2. Optical Sensor(6ea)

Experiments
• Luminous intensity effects by the changes in the intensity of radiation
• Photoelectric effects by the changes in the intensity of radiation
• Photo-Transistor’s characteristics by the changes in the intensity of radiation
• Variation of sensing distance by the color of an detected object
• Comparison of switching frequency of sensors

Main Components
• Data Acquisition Module(ED-6831)
» A/D, D/A Converter(built-in)
» capable of PC interface by serial communication
• Signal Conditioner(ED-6832) : 8 ranges, output terminals for the application
modules
• Optical Conversion Apparatus(OU6830-7) : Changes in the intensity of radiation
by D/A output
• Optical Sensor(Anlog Type)(OS6830-4, 5, 6) : CdS, Photo-Diode, Photo-Transistor
• Optical Sensor(On/Off Type)(OS6900-9, 10, 11, 14, 15) : Pervious, Direct
Reflective, Optical Fiber
• Lamp & Buzzer Unit(LB6900-35) : NPN/PNP input and simultaneous connection
with 4 types of sensor
• Counter Unit(CM6900-36) : Total Counters/Switching Frequency indication
• Motor Speed Controller(Rotary Unit)(MS6900-20) : Speed-variable &
sensorattachable

45 Part1 Electricals / Electronics / Embedded

Part1. ed_english_catalog1_v1.indd 45 2014-02-25 �� 10:54:42

 • Sensor/Interface Conversion

ED-6830 SENSOR TRAINER FOR FACTORY AUTOMATION

Electronics
Embedded

Electricals
PART3. Magnetic sensor(2ea)

Experiments

Renewable
energy &
• Characteristics of Hall Effect by the magnetic intensity

LED
• Hall Effect by the magnetic change
• Characteristics of Hall IC by by the magnetic intensity
• Magnetic pole detection on the magnet

Main Components
• Data Acquisition Module(ED-6831)

Communication
» A/D, D/A Converter(built-in)
» capable of PC interface by serial communication

IT/
• Signal Conditioner(ED-6832) : 8 ranges, output terminals for the application
modules
• Slide Unit(SU6900-41) : Test materials stand and scale ruler mounted
• Attachable/detachable Vernier Callipers
• Test Materials Set(DS6900-40) : for Hall Sensor & Hall IC experiments
• Hall Sensor(HS6830-8) : Experiments in connection with OP Amp. module
• Hall IC(HS6830-9) : Voltage output type

Measurement
Test&
Automation

Intelligent
PART4. Temperature sensor(4ea)

Robot/
Experiments
• Thermister(NTC)’s output characteristics by temperature change
• Thermocouple’s output characteristics by temperature change
• Pt100’s output characteristics by temperature change
• Principles of the Human Body Detection Sensor

Mechatronics
Main Components
• Data Acquisition Module(ED-6831)
» A/D, D/A Converter(built-in)
» capable of PC interface by serial communication
• Signal Conditioner (ED-6832) : 8 ranges, output terminals for the applicaion
modules.
• Heating Unit(HU6830-14) : Capable of cooling and heating using the Peltier
element attachable to the temperature sensor indication of current temperature
Simulation
Software

• Thermister(NTC)(TS6830-10) : NTC 10kΩ

• Thermocouple(TS6830-11) : K-Type, Pt100 (TS6830-12)
• Pyroelectric Sensor(Human Body Detection Sensor) (IS6830-13)
Pneumatics
Hydraulics

www.ed.co.kr 46

Part1. ed_english_catalog1_v1.indd 46 2014-02-25 �� 10:54:42

 • Sensor/Interface Conversion

ED-6830 SENSOR TRAINER FOR FACTORY AUTOMATION

PART5. Sound Sensor(2ea)

Experiments
• Ultrasonic Sensor’s output characteristics by distance change
• Microphone’s output characteristics by the variation of sound volume
• Distance sensing principles of the Ultrasonic Sensor

Main Components
• Data Acquisition Module(ED-6831)
» A/D, D/A Converter(built-in)
» capable of PC interface by serial communication
• Signal Conditioner(ED-6832) : 8 ranges, output terminals for the application
modules
• Sound Control Unit(SU6830-25) : Output frequency variation by the D/A
Converter’s output knob mounted for controlling sound volume
• Motor Control Unit(MC6900-37)
» Forward/reverse rotation
» Variable motor speed
» Limit control input terminal mounted
• Spindle Drive Unit(SD6900-25)
» Ball screw type
» Magnetic sensor mounted for position control
» Test materials stand and guide installation
• Ultrasonic Sensor(US6830-15)
• Microphone(PS6830-16)

PART6. Proximity Sensor(3ea)

Experiments
• Sensor operations by the types of object being detected
• Sensor’s operable distance/repetition measure/hysteresis
• Comparison of switching frequency of sensors

Main Components
• Data Acquisition Module(ED-6831)
» A/D, D/A Converter(built-in)
» capable of PC interface by serial communication
• Signal Conditioner(ED-6832) : 8 ranges, output terminals for the application
modules
• Test Materials Set(DS6900-40) : for Proximity Sensor-related experiments
• Proximity Sensor(PS6900-1, 4, 6) : Inductive Proximity Sensor(M12/M18)
Capacitive Proximity Sensor
• Lamp & Buzzer Unit(LB6900-35) : NPN/PNP input and simultaneous
connection with 4 types of sensor
• Counter Unit(CM6900-36) : Total counters/switching frequency indication

47 Part1 Electricals / Electronics / Embedded

Part1. ed_english_catalog1_v1.indd 47 2014-02-25 �� 10:54:42

 • Sensor/Interface Conversion

ED-6830 SENSOR TRAINER FOR FACTORY AUTOMATION

Electronics
Embedded

Electricals
PART7. Chemical Sensor(3ea)

Experiments

Renewable
energy &
• Output characteristics of pH Sensor by pH concentration change

LED
• Output characteristics of Gas Sensor for the Influx of gas
• Output characteristics of Humidity Sensor by humidity change

Main Components
• Data Acquisition Module(ED-6831)
» A/D, D/A Converter(built-in)

Communication
» capable of PC interface by serial communication
• Signal Conditioner(ED-6832) : 8 ranges, output terminals for the application

IT/
modules
• Gas Sensor(GS6830-17) : Voltage output at the time of gas detection
• pH Sensor(PH6830-18) : Voltage variation by pH concentration
• Humidity Sensor(HS6830-19)
• Chemical Conversion Apparatus(CU6830-20) : Gas Volume Control unit pH
Stand and pH Solution(4.0, 7.0, 10.0)

Measurement
Test&
Automation

Intelligent
PART8. Application Module A~D(4ea)

Robot/
Experiments
• Lighting Control(LA6830-21) : Built-in timer
• Pneumatic Automatic Door(PA6830-22) : Pneumatic, SOL V/V in use
• Temperature Control(TA6830-23) : Quartz pipe heater in use
• Motor Control(MA6830-24) : DC fan in use

Mechatronics
Simulation
Software
Pneumatics
Hydraulics

www.ed.co.kr 48

Part1. ed_english_catalog1_v1.indd 48 2014-02-25 �� 10:54:42

 • Sensor/Interface Conversion

ED-6830 SENSOR TRAINER FOR FACTORY AUTOMATION

PART5. Sound Sensor(2ea)

ED-6831 DATA ACQUISITION MODULE
• Self DSO Standard
» Resolution : 8 Bit
» Analog Input Range : 0~12.75V
• Function Generator Module
» Generation waveform type : 5types(Sine, Sawtooth 2 types, Square, Triangle)
» Frequency output range : 2.6~312.5Hz
• DC Voltage Output Module (D/A Converter Output)
» Output Level : 0~12.75V
• Dimension : 248(W) x 86(H) x 166(D)mm

ED-6832 SIGNAL CONDITIONER

• Power Source : DC 24V
• Input Voltage Indication : 0~12V
• Reference Voltage Indication : 0~10V
• Characteristics
» 8-range selectable for the characteristics of each sensor
» Operation of the built-in relay using an output value of sensor
» Operation of the motor in large load and SOL V/V using relay output
» Built-in Polarity Protection Circuit
• Dimension : 248(W) x 86(H) x 166(D)mm

> SENSOR MODULE(24EA)

MECHANICAL SENSOR(4ea)

LS6900-30 LOAD CELL PS6830-1 Semiconductor-

• Measuring Range : Max. 50kgf type Pressure Sensor
• Discharging Voltage : 5V • Measuring Range : 0.1~1bar
• Dimension : 78(W) x 75(H) x 75(D)mm • Output Type : Voltage [V]
• Structured with an even input of outer • Discharging Voltage : DC 24V
load • Dimension : 60(W) x 84(H) x 75(D)mm
• Built-in Polarity Protection Circuit

AS6830-2 FS6830-3
Acceleration Sensor Flow Range Sensor
• Measuring Range : ±2~±1000g • Measuring Range : ±2~±1000g
• Output Type : Voltage [V] • Output Type : Voltage [V]
• Discharging Voltage : DC 24V • Discharging Voltage : DC 24V
• Dimension : 200(W) x 50(H) x 70(D)mm • Dimension : 200(W) x 50(H) x 70(D)mm
• Built-in Polarity Protection Circuit • Built-in Polarity Protection Circuit

49 Part1 Electricals / Electronics / Embedded

Part1. ed_english_catalog1_v1.indd 49 2014-02-25 �� 10:54:42

 • Sensor/Interface Conversion

ED-6830 SENSOR TRAINER FOR FACTORY AUTOMATION

Electronics
Embedded

Electricals
OPTICAL SENSOR(6ea)

Renewable
PS6830-1 Semiconductor-

energy &
OS6830-4 CdS
type Pressure Sensor

LED
• Output Type : Resistance [Ω] • Measuring Range : 0.1~1bar
• Operating Temperature : -30~+70˚C • Output Type : Voltage [V]
• Dimension : 60(W) x 84(H) x 75(D)mm • Discharging Voltage : DC 24V
• Dimension : 60(W) x 84(H) x 75(D)mm
• Built-in Polarity Protection Circuit

Communication
OS6830-6 OS6900-9, OS6900-10

IT/
Photo Transistor Optical Sensor Module(Pervious)
• Output Type : Current [mA] • Power Source : DC 24V
• Discharging Voltage : DC 24V • Response Speed : Less than 1ms
• Dimension : 60(W) x 84(H) x 75(D)mm • Consumption Current : Less than 40mA
• Built-in Polarity Protection Circuit • Light Source : Infrared LED
• Light Receiving Element : IC built-in

Measurement
Photo Diode
• Sensitivity Adjustment : Built-in VR

Test&
• Detectable Distance : 5~10m
• Dimension : 60(W) x 60(H) x 100(D)mm
• Built-in Polarity Protection Circuit

OS6900-11 OS6900-14, OS6900-15

Optical Sensor Optical Fiber

Automation

Intelligent
Module(Reflective) • Power Source : DC 24V

Robot/
• Power Source : DC 24V • Light Source : Red LED
• Light Source : Infrared LED • Conversion Mode : Light On / Dark On
• Switching Distance : 300mm • Response Speed : Less than 1ms
• Response Speed : Less than 1ms • Sensitivity Adjustment : Built-in VR
• Sensitivity Adjustment : Built-in VR • Operation Identification : LED(mounted)
• Operation Identification : • Dimension : 60(W) x 84(H) x 75(D)mm
LED(mounted) • Built-in Polarity Protection Circuit and

Mechatronics
• Dimension : 60(W) x 60(H) x 100(D)mm Short Prevention Circuit
• Built-in Polarity Protection Circuit and
Short Prevention Circuit Optical Fiber
• Diameter : ø2.2
• Length : Over 1m
• Response Speed : Less than 1ms
• Allowed Curve Radius : 30r
• Min. Detecting Object : Less than 0.1mm
• Dimension : 60(W) x 75(D) x 84(H)mm
Simulation
Software

MAGNETIC SENSOR(2ea)

HS6830-8 Hall Sensor HS6830-9 Hall IC

• Output Type : Resistance [Ω] • Output Type : Voltage [V]
• Discharging Voltage : 5V • Power Source : DC 24V
Pneumatics

• Operating Temperature : -55~+125˚C • Dimension : 60(W) x 84(H) x 75(D)mm

Hydraulics

• Dimension : 60(W) x 84(H) x 75(D)mm • Built-in Polarity Protection Circuit

• Distinction of the magnet’s polarity • Distinction of the magnet’s polarity

www.ed.co.kr 50

Part1. ed_english_catalog1_v1.indd 50 2014-02-25 �� 10:54:43

 • Sensor/Interface Conversion

ED-6830 SENSOR TRAINER FOR FACTORY AUTOMATION

TEMPERATURE SENSOR(4ea)

TS6830-10 Thermister TS6830-11 Thermocouple

• NTC 10kΩ • Output Type : Voltage [V]
• Output Type : Resistance [Ω] • Power Source : DC 24V
• Operating Temperature : -20~+200˚C • Dimension : 60(W) x 84(H) x 75(D)mm
• Dimension : 60(W) x 84(H) x 75(D)mm • K-type
• Built-in Polarity Protection Circuit

TS6830-12 IS6830-13
Pt100(Platinum Sensor) Pyroelectric Sensor
• Pt100Ω • Power Source : DC 24V
• Output Type : Resistance [Ω] • Rise Time : 100ms
• Dimension : 60(W) x 84(H) x 75(D)mm • Active Area : 2x1mm
• Operating Temperature : -40~+60˚C
• Dimension : 60(W) x 84(H) x 75(D)mm
• Built-in Polarity Protection Circuit

SOUND SENSOR(2ea)

US6830-15 Ultrasonic Sensor PS6830-16 Microphone

• Sensing Distance : 1~50cm • Output Type : Frequency output by a
• Operating Temperature : -40~+85˚C sound source
• Response Frequency : 40 ± 1kHz • Measuring Range : 20Hz~20kHz
• Output Type : Voltage (V) • Dimension : 60(W) x 84(H) x 75(D)mm
• Dimension : 70(W) x 260(H) x 124(D)mm • Condenser microphone
• Built-in Polarity Protection Circuit • Built-in Polarity Protection Circuit

PROXIMITY SENSOR(3ea)
PS6900-1 Inductive Proximity PS6900-4 Inductive Proximity
Sensor (M18) Sensor (M12)
• Power Source : DC 24V • Power Source : DC 24V
• Switching Distance : About 5mm • Switching Distance : About 4mm
• Max. Switching Frequency : 350Hz • Max. Switching Frequency : Over 400Hz
• Dimension : 60(W) x 84(H) x 75(D)mm • Dimension : 60(W) x 84(H) x 75(D)mm
• Built-in Polarity Protection Circuit and • Built-in Polarity Protection Circuit and
Short Prevention Circuit Short Prevention Circuit
• Fitted with LED • Fitted with LED
• Flush type

PS6900-6 Capacitive Proximity Sensor

• Power Source : DC 24V • Dimension : 60(W) x 84(H) x 75(D)mm
• Switching Distance : About 8mm • Built-in Polarity Protection Circuit and Short Prevention
• Max. Switching Frequency : Over 50Hz Circuit
• Consumption Current : Less than 15mA • Fitted With LED

51 Part1 Electricals / Electronics / Embedded

Part1. ed_english_catalog1_v1.indd 51 2014-02-25 �� 10:54:43

 • Sensor/Interface Conversion

ED-6830 SENSOR TRAINER FOR FACTORY AUTOMATION

Electronics
Embedded

Electricals
CHEMICAL SENSOR(3ea)

GS6830-17 Gas Sensor PH6830-18 pH Sensor

Renewable
energy &
• Detectable Gas : LPG, LNG, Methane • Measuring Range : 0.00~14.00pH

LED
• Sensing Range : 500~1000ppm • Operating Temperature : 0~60˚C
• Output Type : Voltage [V] • Response Time : Less than 10s (90%
• Dimension : 60(W) x 84(H) x 75(D)mm Response)
• Built-in Polarity Protection Circuit • Output Type : Voltage [V]
• Dimension : 60(W) x 84(H) x 75(D)mm
• Built-in Polarity Protection Circuit

Communication
HS6830-19 Humidity Sensor

IT/
• Output Type : Voltage [V]
• Measuring Range : 0~100%
• Dimension : 60(W) x 84(H) x 75(D)mm
• Built-in Polarity Protection Circuit

Measurement
Test&
> CONVERSION MODULE(5EA)

HEATING UNIT

HU6830-14 Heating Unit

Automation

Intelligent
• Temperature Range : 15~70˚C • Capable of linking with each Temperature Sensor module

Robot/
• Power Sour ce : DC 24V • Variable temperature control
• Dimension : 124(W) x 86(H) x 166(D)mm • Built-in Polarity Protection Circuit
• Thermoelectric Module(Heating, Cooling)

SPINDLE DRIVE UNIT & MOTOR CONTROL MODULE

Mechatronics
SD6900-25 Spindle Drive Unit MC6900-37
• Transfer Range : Over 250mm Motor Control Module
• Power Source : DC 24V • Location Controller For SD6900-25 :
• Limiter Switch : In use of location Speed and direction control
detection (left : 1ea, right : 1ea) • Power Source : DC 24V
• Aluminum Reflector : In use of Ultrasonic • Dimension : 124(W) x 86(H) x 166(D)mm
Sensor experiments • End limit signal terminal mounted to
• Dimension : 554(W) x 295(H) x 100(D)mm prevent overrun
• Terminal mounted for detection of the • Motor voltage output terminal mounted
Simulation

limiter signal
Software

for motor control

CHEMICAL CONVERSION APPARATUS

CU6830-20 CU6830-20 pH Stand and Gas

pH Standard Solution Volume Controlling Unit
Pneumatics
Hydraulics

• pH4.0 standard solution 500ml 1BT • Flexible stand

• pH7.0 standard solution 500ml 1BT • Gas volume adjustable type
• pH10.0 standard solution 500ml 1BT
• Measuring Reagent: 3Types

www.ed.co.kr 52

Part1. ed_english_catalog1_v1.indd 52 2014-02-25 �� 10:54:43

 • Sensor/Interface Conversion

ED-6830 SENSOR TRAINER FOR FACTORY AUTOMATION

OPTICAL CONVERSION APPARATUS

OU6830-7
• Power Source : DC 24V
• Light Source : White transparent ø10 LED
• Dimension : 60(W) x 84(H) x 75(D)mm
• Controllable from PC by the output Signal of ED-6831 D/A Converter
• Built-in Polarity Protection Circuit

SOUND CONTROL UNIT

SU6830-25
• Power Source : DC 24V
• Dimension : 60(W) x 84(H) x 75(D)mm
• Controllable from PC by the output signal of ED-6831 D/A Converter
• Built-in Polarity Protection Circuit

> APPLICATION MODULE(8EA)

AMPLIFIER MODULE MOTOR SPEED CONTROLLER
AM6900-38 MS6900-20
• Half/Full Bridge Circuit experiments • Power Source : DC 24V
• Built-in standard resistance(350Ω) • Consumption Current : 200mA
• Simple wire arrangement using ø4 terminal • Dimension : 80(W) x 57(H) x 140(D)mm
• Amplified signal generation using OP Amp. • Rotation of the disc with four holes
• Offset adjustable terminals • Built-in Polarity Protection Circuit and
• Push Switch(built-in) for selecting the Short Prevention Circuit
standard resistance at the user’s choice • Speed-variable type
• Dimension : 124(W) x 86(H) x 166(D)mm • Attachable to Optical Fiber and ø12
Inductive Sensor
• Clamping device mounted for the profile
installation

LAMP & BUZZER MODULE COUNTER MODULE

LB6900-35 CM6900-36
• Input Terminal : Over 10ea • Power Source : DC 24V
• Output Indication : Lamp and Buzzer • Indication Digits : 4digits
• Dimension : 124(W) x 86(H) x 166(D)mm • Indication Function : Impulse and lmp/s
• Operable upon NPN/PNP signal input • Mode Selection : 100pulse, 1000pulse,
• Composed of plastic extruded box Ext. Mode
• Indication Conversion Switch : Toggle
type
• Dimension : 124(W) x 86(H) x 166(D)mm

53 Part1 Electricals / Electronics / Embedded

Part1. ed_english_catalog1_v1.indd 53 2014-02-25 �� 10:54:43

 • Sensor/Interface Conversion

ED-6830 SENSOR TRAINER FOR FACTORY AUTOMATION

Electronics
Embedded

Electricals
APPLICATION MODULE A APPLICATION MODULE B
(LIGHTING CONTROL) (PNEUMATIC AUTOMATIC DOOR)

LA6830-21 PA6830-22

Renewable
energy &
• Applicable to all sensor modules of • Applicable to all sensor modules of

LED
ED-6830 ED-6830
• Built-in timer • Built-in timer
• AC 220V power source • DC 24V terminals & control input
• DC 24V terminals & control input terminals
terminals • Dimension : 248(W) x 86(H) x 166(D)mm
• Dimension : 248(W) x 86(H) x 166(D)mm

Communication
IT/
APPLICATION MODULE C APPLICATION MODULE D
(TEMPERATURE CONTROL) (MOTOR CONTROL)

TA6830-23 MA6830-24
• Applicable to all sensor modules of • Applicable to all sensor modules of
ED-6830 ED-6830

Measurement
• Quartz pipe heater in use • DC fan in use
• DC 24V terminals & control input • Control input terminals

Test&
terminals • Dimension : 248(W) x 86(H) x 166(D)mm
• Dimension : 248(W) x 86(H) x 166(D)mm

Automation

Intelligent
Robot/
> PNEUMATIC SET(11EA)
PRESSURE SWITCH AIR DISTRIBUTOR

pPES-3006 pPMC-6408
• Pressure Range : 0~12bar • Operating Pressure : 0~9bar
• Max. Switching Current : 5A • Output Connector Port : 4ea

Mechatronics
• Contact Output : 1a1b (Check Valve Built-in Type) : ø6
• Max. Switching Frequency : 3Hz • Input Connector Port : 1ea : ø6
• Operating Range Setup : By the • Hand slide valve mounted for
sensitivity-tuning screw open/close

Simulation

PUSH BUTTON VALVE LOW PRESSURE VALVE

Software

pDV-332B-1C pLPR-3206
• Operating Pressure : 0.5~10bar • Operating Pressure : 0~10kgf/cm2
• Direct Drive / Spring Return type • Setting Pressure : 0~2kgf/cm2
• Normally Close (N.C) type • Pressure gauge mounted
Pneumatics
Hydraulics

www.ed.co.kr 54

Part1. ed_english_catalog1_v1.indd 54 2014-02-25 �� 10:54:43

 • Sensor/Interface Conversion

ED-6830 SENSOR TRAINER FOR FACTORY AUTOMATION

AIR PRESSURE RESERVOIR AIR SERVICE UNIT

pAPR-0510 pASU-10-2
• Operating Pressure : 10~15bar • Operating Pressure : 0~10bar
(Limiting Pressure) • Setting Pressure : 0.5~8.5bar
• Tank Capacity : Over 0.1l • Composed of Air Filter and Pressure
• Input Terminal : Fittings with built-in Regulator Valve
Check Valve (Pressure Gauge mounted)
• Sealed output part • Auto Drain Valve mounted

PNEUMATIC CYLINDER SILENT AIR COMPRESSOR

PS-2550 AC-7808
• Operating Pressure : 0.5~10bar • Input Voltage : 220V
• Diameter : ø25 • Electric Power : 3/4HP
• Stroke : 50mm • Tank Capacity : 25l
• Cylinder Output : About 250N • Discharge Pressure : 8kgf/cm2
(based on 6 bar) • Setting Pressure : 5~8kgf/cm2

T TYPE CONNECTOR MOTOR SPEED CONTROLLER

pCN-3407 HC-3410
• Operating Pressure : 0~9.9kgf/cm2 • Standard Set Quantity : 1ea
• Connecting Hose : Inside/outside • Parts for cutting the air hose
diameter : ø4/ø6
• Quantity comprising a set : 10ea
• Connectors for divergence

AIR HOSE

pAH-3406
• Soft nylon In blue color
• Inside/Outside Diameter : ø4/ø6-25m
• Quantity comprising a Set : 1set

> POWER SUPPLY

PS-7400-2
• DC 24V Output Terminal : 3 pairs
• Built-in Short Prevention Circuit(Buzzer)
• Maximum Current : 8A
• Dimension : 248(W) x 86(H) x 166(D)mm

55 Part1 Electricals / Electronics / Embedded

Part1. ed_english_catalog1_v1.indd 55 2014-02-25 �� 10:54:43

 • Sensor/Interface Conversion

ED-6830 SENSOR TRAINER FOR FACTORY AUTOMATION

Electronics
Embedded

Electricals
> EXPERIMENTAL MATERIALS(5EA)

SLIDE UNIT TEST MATERIAL SET

Renewable
SU6900-41 DS6900-40

energy &
• Slide Distance : 150mm • Carrying Case : Aluminum material

LED
• Adjustable Angle : ±90˚ Pressure Range • Composition : Magnet(2 types), Mild
• Dimension : 170(W) x 72(H) x 130(D)mm Steel(3 types), Stainless Steel,
• With Vernier Scale Aluminum, Plastic(3 types), Rubber,
Brass, Beaker, Transparent Board,
Board(4 types), Sensitivity-tuning
Driver

Communication
IT/
WORK TABLE
(INCLUDING STORAGE CABINET) LOAD SET

T683 LS6900-32
• Dimension : • 1kg/ea cylinder-type load : 10ea
1230(W) x 1235(H) x 795(D)mm • Comes with a hard case for storage
• Aluminum Profile and transport

Measurement
• Trolley with four wheels and

Test&
drawers for storage

CIRCUIT CONNECTION CABLE

Automation
CA6830

Intelligent
Robot/
• Red Color: 100mm: 5ea, 300mm: 5ea, 600mm: 5ea, 800mm: 5ea
• Blue Color: 100mm: 5ea, 300mm: 5ea, 600mm: 5ea, 800mm: 5ea
• Black Color: 100mm: 5ea, 300mm: 5ea, 600mm: 5ea, 800mm: 5ea
• Yellow Color: 600mm: 5ea, 800mm: 5ea

Mechatronics
> Optional Smart Learning NEW

(Contents-running System)
Simulation
(Interface Board)

Wire LAN
Software

Wireless

RS-232C

Bluetooth

USB (iOS,OSX) (Android) (MS Windows)

Middle ware Web server

USBContents
Any Device Interface Any Computer
Pneumatics
Hydraulics

• Smart Learning Contents Interactive with Hardware

• Compatible with All Operating System (iOS, Android, OSX, MS Windows, Linux etc)
• Multi-User Oriented Electronic Book Authoring Tool and Platform (E3) included.

www.ed.co.kr 56

Part1. ed_english_catalog1_v1.indd 56 2014-02-25 �� 10:54:44

 • Electrical Machine

ED-5100 MOTOR/GENERATOR TRAINING SET

• Complete Motor/Generator Training System

• Various load characteristics(Resistance, L/C Reactance and Torque)
• Selectable System(ED-5100-1, ED-5100-2, ED-5100-3 or Full Set)

> SPECIFICATION
GENERAL CHARACTERISTICS » M/G Mounting Base : 810(W) x 70(H) x 395(D)mm
• Motor Input Voltage » Bench-Top Console(BTC-180-6)
» AC Motor › 1500(W) x 790(H) x 380(D)mm (with ED-5100-2 or
› 110V, 60Hz(2-Phase) ED-5100-3)
› 220V, 60Hz(3-Phase)
» DC Motor : 110V DC
• Generator Output Voltage
» AC Generation : 110V/220V, 60Hz ACCESSORIES
» DC Generation : 110V
• Dimension • Patch Cord(ø4 Plug) : 1set
» Motor/Generator : 240(W) x 276(H) x 345(D)mm • Experimental Manual(DC, AC) : 2ea
» Panel Equipment : 480(W) x 180(H) x 210(D)mm

NEW
> Optional Smart Learning
(Contents-running System)
(Interface Board)

Wire LAN

Wireless

RS-232C

Bluetooth

USB (iOS,OSX) (Android) (MS Windows)

Middle ware Web server

USBContents
Any Device Any Computer
Interface
• Smart Learning Contents Interactive with Hardware
• Compatible with All Operating System (iOS, Android, OSX, MS Windows, Linux etc)
• Multi-User Oriented Electronic Book Authoring Tool and Platform (E3) included.

57 Part1 Electricals / Electronics / Embedded

Part1. ed_english_catalog1_v1.indd 57 2014-02-25 �� 10:54:44

 • Electrical Machine

ED-5100 MOTOR/GENERATOR TRAINING SET

Electronics
Embedded

Electricals
> Moter/Generator/Load-Torque

DM-250 DC Machine DYN-250 Electro Dynamometer

Renewable
energy &
LED
• Motor : 1/3HP • Torque : 0~30(kg-cm)
• Generator : 110V, 2A • Rate : 1/3HP(Motor), 250W(Generator)
• RPM : 1800 • Dimension : 380(W) x 200(H) x 390(D)mm
• Weight : 18.5kg • Weight : 26.5kg

Communication
SM-250-3 Synchro Machine DYN-250 Electro Dynamometer

IT/
• Motor : 1/3HP • Max. Speed : 3000 RPM
• Alternator : 120VA • FS Torque : 0~30(kg-cm)
• RPM : 1800 • Dimension : 300(W) x 330(H) x 360(D)mm
• Weight : 18kg • Weight : 8kg

Measurement
Test&
MFM-250 Multi-Function Motor ED-5115 Wound Rotor Speed Controller

• Split-phase, • Control Phase : 3-phase, 5steps

Capacitor Start/Run • Power Rate : 1/3HP
• Power : 1/3HP • Dimension : 320(W) x 180(H) x 235(D)mm
• RPM : 1725

Automation
• Weight : 4.7kg

Intelligent
• Weight : 19kg

Robot/
IM-250-3 Induction Motor ED-5121 Switch Module

• Squirrel-cage rotor • Contacting

• Power : 1/3HP » 10A 2-way(1ea)

Mechatronics
• RPM : 1725 » 10A 3-way(1ea)
• Weight : 16kg • Dimension : 250(W) x 190(H) x 200(D)mm
• Weight : 4.1kg

WRM-250-3 Wound Rotor Motor ED-5120 Three-phase Voltage Controller

• Input : AC 380V, 3-phase 60Hz
• Slip-ring, Synchro
Simulation

• Output
Software

• Power : 1/3HP
» 380V (15A), 3-phase (Fixed)
• RPM : 1725
» 0~208V(3A), 4-wire
• Weight : 22kg
» Protection: NFB
• Dimension : 310(W) x 260(H) x 415(D)mm
• Weight : 19.5kg

RSIM-250 Repulsion Induction Motor ED-5101 Resistance Load

Pneumatics
Hydraulics

• Resistance Range : 57Ω~3600Ω ±5%

• Wound Stator & Rotor • Load Current : 2.1A(0.1A Steps)
• Power : 1/3HP • Power Rate : 250W(Max.)
• RPM : 1750 • Load phase : 3-way(3-phase)
• Weight : 21.5kg • Weight : 8.4kg

www.ed.co.kr 58

Part1. ed_english_catalog1_v1.indd 58 2014-02-25 �� 10:54:44

 • Electrical Machine

ED-5100 MOTOR/GENERATOR TRAINING SET

> Motor/Generator/Load-Torque

• Load Rate : 100W(Max.) x 3-way

ED-5104 • Resistance Range : 330Ω~2kΩ(in 6step)
Reactance Load • Reactance(3-way)
• Weight : 16kg

• Range(Voltage) : 0~50/150V(Dual Ind.)

ED-5105 • Range(Amperes) : 0~1/2.5/5A(Dual Ind.)
• Type of Meter : 80 x 40mm, 2.5 Class
DC Volt./AMP. Meter • Protection : Over input protection
• Weight : 6.2kg

• Range(Voltage) : 0~150/300V(Dual Ind.)

• Range(Amperes) : 0~1/2.5/5A, 0~2/5/10A
ED-5106 • Type of Meter : 80 x 40mm, 2.5 Class
AC Volt./AMP. Meter • Protection : Over input protection
• Weight : 6.3kg

• Range(Watt) : 0~300/600/1200W(Dual)
ED-5109 • Voltage Input : 150/300V
• Current Input : 2/4/8A
AC Watt Meter • Protection : Over current protection
• Weight : 8.8kg

• Control Power : 10~300W

• Input Voltage : AC 110/220V
ED-5113 • Output Voltage : 0~150V Half Wave
SCR Speed Control • Maximum Current : 2A
• Protection : Over load protection
• Weight : 17.5kg

• Power Input: AC 220V, 50/60Hz

• AC Output : 0~140V, 4A(Variable), 220V, 15A(Fixed)
ED-5119 • DC Output : 0~125V(5A), 0~150V(1A)
AC/DC Power Supply • Protection : Over load protection
• Dimension : 495(W) x 190(H) x 360(D)mm
• Weight : 20kg

59 Part1 Electricals / Electronics / Embedded

Part1. ed_english_catalog1_v1.indd 59 2014-02-25 �� 10:54:44

 • Electrical Machine

ED-5100 MOTOR/GENERATOR TRAINING SET

Electronics
Embedded

Electricals
> Motor/Generator/Load-Torque

ED-5122 Power Factor Meter

Renewable
energy &
LED
• Measuring Range : øCos : -0.5~1~+0.5(or 0~100%)
• Accuracy : ±0.25% of Full Scale
• Auxiliary Power : AC 110/220V
• Dimension : 250(W) x 190(H) x 200(D)mm
• Weight : 5.2kg

Communication
IT/
MGM-250-2 M/G Mounting Base

• Type : 2-unit fixing base

• Material : Metal Plate
• Dimension : 820(W) x 115(H) x 430(D)mm

Measurement
• Weight : 11.3kg

Test&
BTC-180-6 Bench-Top Console
• 2-part separation type
• Panel Rack : 1ea

Automation

Intelligent
• Instrument Rack : 1ea

Robot/
• Material : PB-HPM Board
• Weight : 95kg

Mechatronics
MC-128ED Mobile Rack Console

• 2-part separation type

• Panel Rack : 1ea
• Motor/Generator Rack : 1ea
• Material : PB-HPM Board
• Weight : 60kg
Simulation
Software
Pneumatics
Hydraulics

www.ed.co.kr 60

Part1. ed_english_catalog1_v1.indd 60 2014-02-25 �� 10:54:44

 • Electrical Machine

ED-5100 MOTOR/GENERATOR TRAINING SET

> SYSTEM COMPONENT LIST

CATEGORY
ITEM MODEL OPTION FULL SET
5100-1 5100-2 5100-3

MOTOR & GENERATOR

DC Machine DM-250 • • • x •
Synchronous Machine SM-250-3 • • • x •
Multi-Function Motor MFM-250 • • • x •
Induction Motor IM-250-3 x • • x •
Wound Rotor Motor WRM-250-3 x • • x •
DC Motor DCM-250 x x x • •
DC Generator DCG-250 x x x • •
Capacitor Start Motor CSM-250 x x x • •
Repulsion Induction Motor RSIM-250 x x x • •
STARTER & SPEED CONTROLLER
3 & 4 points DC Starter ED-5111 • • • x •
DC Automatic Starter ED-5112 x x x • •
SCR Speed Controller ED-5113 x x • x •
Wound Rotor Motor Controller ED-5115 x • • x •
LOAD & TORQUE MEASURING
Variable Resistance Load ED-5101 • • • x •
Variable Inductance Load ED-5102 x x x • •
Variable Capacitance Load ED-5103 x x x • •
Reactance Load ED-5104 x • • x •
Electro-Dynamometer DYN-250 x x • x •
Prony Brake PB-250ED x • • x •
MOTOR PANEL
DC Voltage/Ampere Meter ED-5105 x • • x •
AC Voltage/Ampere Meter ED-5106 x • • x •
AC Wattmeter ED-5109 • • • x •
POWER SUPPLY
AC/DC Power Supply ED-5119 • • • x •
3-Phase Voltage Controller ED-5120 x • • x •
OTHER SUPPORT PARTS
Synchronizing Module ED-5110 x x • x •
Series Field Rheostat ED-5116 x x • x •
Switch Module ED-5121 x x • x •
Poewr Factor Meter ED-5122 x x x • •
Transformer Demonstrator ED-5123 x x x • •
M/G Mounting MGM-250-2 • • • x •
Bench-Top Console BTC-180-6 x • • x •
Mobile Rack Console MC-128ED

61 Part1 Electricals / Electronics / Embedded

Part1. ed_english_catalog1_v1.indd 61 2014-02-25 �� 10:54:44

 • Electrical Machine

MG-5211 DC(SHUNT, SERIES) MOTOR / DC GENERATOR

Electronics
Embedded

Electricals
• Starting and load characteristics of shunt/series DC motor
• DC generator’s rotating speed and output characteristics

Renewable
energy &
LED
Communication
IT/
Measurement
Test&
Automation

Intelligent
> EXPERIMENTS

Robot/
• Start and load characteristics of DC shunt-wound motor • Load characteristics of DC compound motor
• Start and load characteristics of DC series-wound motor • Cumulative compound and differential compound characteristics
• Loss and efficiency of DC motor • Generator rotating speed and output characteristics
• Relationship of motor speed with the electromotive force • Loss and efficiency of DC compound generator

> SPECIFICATION

Mechatronics
» MOTOR SECTION
• Winding Type : Shunt/Series • Series Field Rheostat : 0~50Ω, 50W
• Speed : 1250~1800 RPM • Indication Meter : 2-current, 1-voltage
• Input Voltage : 0~120V, 3.5A • Overload Trip : 2A
• Shunt Field Excitation : 0.4A(Sep.), 120V • Load Resistance : 48Ω~480Ω, 500W
• Number of poles : 2 poles
• Horsepower : 1/3 HP » GENERAL CHARACTERISTICS
• Main Input Voltage : AC 220V. single phase
Simulation

• Shunt Field Rheostat : 0~300Ω, 50W

Software

• Armature Rheostat : 0~10Ω, 80W • Rating : 30 minutes

• Indication Meter : 2-current, 1-voltage, 1-RPM(digital) • Dimension of system : 990(W) x 670(H) x 475(D)mm
• Overload Trip : 4A • Weight : 75kg

» GENERATOR SECTION ACCESSORIES

• Winding Type : Compound
• Speed : 1800 RPM
• Patch Cords(ø4 Plug) : 1set
Pneumatics
Hydraulics

• Output power : DC 0~120V, 1A

• AC Power Cord : 1ea
• Number of poles : 2 poles
• Experimental Manual : 1ea
• Field Excitation : Self excited
• Shunt Field Rheostat : 0~300Ω, 50W

www.ed.co.kr 62

Part1. ed_english_catalog1_v1.indd 62 2014-02-25 �� 10:54:45

 • Electrical Machine

SQUIRREL CAGE INDUCTION MOTOR/

MG-5212 DC GENERATOR
• Starting and load characteristics of squirrel cage induction motor
• DC generator’s no load saturation characteristics

> EXPERIMENTS
• Start and load characteristics of squirrel cage induction motor • Load characteristics of separately excited DC sShunt-wound generator
• Alteration of the rotative directions of squirrel cage Induction Motor • Generator’s no-load saturation characteristics
• Slip speed and torque of induction motor • Shunt field and output
• Induction motor’s no-load power factor and load power factor • DC shunt-wound generator’s loss and efficiency

> SPECIFICATION
» MOTOR SECTION • Field Excitation : Separately excited
• Winding Type • Shunt Rheostat : 0~300Ω, 50W
» Squirrel cage rotor • Exciting Power : DC 0~120V, 1A
» Split-phase stator • Indication Meter : 2-current, 2-voltage
• Speed : 1725 RPM • Overload Trip : 2A
• Input Voltage : AC 110V, 60Hz • Load Resistance : 48Ω~480Ω, 500W
• Input Current : 6.6A
• Horsepower : ⅓ HP » GENERAL CHARACTERISTICS
• Start Capacitor : 180~220μF • Main Input Voltage : AC 220V, single phase
• Indication Meter : 1-current, 1-voltage, 1-RPM, 1-watt • Rating : 30 minutes
• Over Load Trip : 7A • Dimension of System : 990(W) x 670(H) x 475(D)mm

» GENERATOR SECTION ACCESSORIES

• Winding Type : Shunt(separately excited)
• Speed : 1725 RPM
• Patch Cords(ø4 Plug) : 1set
• Output Power : 120V, 1A
• AC Power Cord : 1ea
• Number of Poles : 4 poles
• Experimental Manual : 1ea

63 Part1 Electricals / Electronics / Embedded

Part1. ed_english_catalog1_v1.indd 63 2014-02-25 �� 10:54:45

 • Electrical Machine
WOUND-ROTOR INDUCTION MOTOR/
MG-5213

Electronics
Embedded

Electricals
DC GENERATOR
• Starting and load characteristics of wound rotor induction motor
• Load characteristics of DC shunt / compound generator

Renewable
energy &
LED
Communication
IT/
Measurement
Test&
Automation

Intelligent
> EXPERIMENTS

Robot/
• Start characteristics of wound-rotor induction motor • Load characteristics of shunt-wound and compound generators
• Speed and torque of wound-rotor induction motor • Generator’s speed and output by winding type
• Power factor of wound-rotor induction motor • Loss and efficiency comparisons by winding type
• Y-and Δ-connections

> SPECIFICATION

Mechatronics
» MOTOR SECTION • Shunt Field Rheostat : 0~300Ω, 50W
• Winding Type : Wound Rotor & Stator • Series Field Rheostat : 0~50Ω, 50W
• Speed : 1750 RPM • Indication Meter : 2-current, 2-voltage
• Frequency : 60Hz • Overload Trip : 4A
• Input Voltage : 208V, 3-phase(Y-connection : 360V) • Load Resistance : 48Ω~480Ω, 500W
• Full Load Current : 1.7A
• Number of Pole : 4 Poles » GENERAL CHARACTERISTICS
Simulation

• Horsepower : ⅓HP • Main Input Voltage : AC 220V, 3-phase

Software

• Speed Controller : 0~50Ω(3-way) • Rating : 30 minutes

• Indication Meter : 2-current, 1-voltage, 1-RPM(digital), 1-watt • System Dimension : 920(W) x 670(H) x 460(D)mm
• Over Load Trip : 3A • Weight : 90kg

» GENERATOR SECTION ACCESSORIES

• Winding Type : DC Shunt/Compound
• Speed : 1750 RPM
• Patch Cords(ø4 Plug) : 1set
Pneumatics
Hydraulics

• Number of poles : 2 poles

• AC Power Cord : 1ea
• Output Power : 115V, 1.5A
• Experimental Manual : 1ea
• Field Excitation : self-excitation

www.ed.co.kr 64

Part1. ed_english_catalog1_v1.indd 64 2014-02-25 �� 10:54:45

 • Electrical Machine

MG-5214 DC(SHUNT, COMPOUND) MOTOR/AC GENERATOR

• Load characteristics and loss / efficiency of DC motor

• 3-phase AC generator’s characteristics by synchronous machine

> EXPERIMENTS
• DC motor’s load characteristics • Saturation curve of AC generator
• DC motor’s loss and efficiency • Load characteristics of AC generator
• Alteration of the motor’s rotative directions • Loss and efficiency of AC generator
• Motor’s speed and torque • Y-and Δ-connections

> SPECIFICATION
» MOTOR SECTION
• Winding Type : Shunt/Compound • Exciting Power : DC 0~120V, 1A
• Speed : 1250~1800 RPM • Indication Meter : 2-current, 2-voltage
• Input Voltage : 120V, 3.6A • Overload Trip : Approx. 2A
• Horsepower : ⅓HP • Load Resistance : 375Ω~2kΩ, 600W
• Number of Poles : 2 poles
• Shunt Field : 120V, 0.4A » GENERAL CHARACTERISTICS
• Indication Meter : 2-current, 1-voltage, 1-RPM(digital) • Main Input Voltage : AC 220V, single phase
• Overload Trip : 4A • Rating : 30 minutes
• Dimension : 960(W) x 670(H) x 480(D)mm
» GENERATOR SECTION • Weight : 89kg
• Winding Type : Synchronous Machine
• Alternator Power : 120VA ACCESSORIES
• Output Voltage : 200V, 3-phase, 4Wire
• Speed : 1800 RPM
• Patch Cords(ø4 Plug) : 1set
• Frequency : 60Hz
• AC Power Cord : 1ea
• Number of Poles : 4 poles
• Experimental Manual : 1ea

65 Part1 Electricals / Electronics / Embedded

Part1. ed_english_catalog1_v1.indd 65 2014-02-25 �� 10:54:45

 • Electrical Machine
SYNCHRONOUS MOTOR (3-PHASE)/
MG-5215

Electronics
Embedded

Electricals
DC GENERATOR
• Starting and load characteristics of synchronous motor
• Load characteristics of self-excited shunt-wound generator

Renewable
energy &
LED
Communication
IT/
Measurement
Test&
Automation

Intelligent
> EXPERIMENTS

Robot/
• Start characteristics of wound-rotor induction motor • Load characteristics of shunt-wound and compound generators
• Speed and torque of wound-rotor induction motor • Generator’s speed and output by winding type
• Power factor of wound-rotor induction motor • Loss and efficiency comparisons by winding type
• Y-and Δ-connections

> SPECIFICATION

Mechatronics
» MOTOR SECTION
• Winding Type : Synchronous Machine • Shunt Rheostat : 0~300Ω, 50W
• Speed : 1750 RPM • Indication Meter : 2-current, 2-voltage
• Input Voltage : 120/208V, 3-phase 4 Wire • Overload Trip : 2A Approx.
• Frequency : 60Hz • Load Resistance : 48Ω~480Ω, 500W
• Number of Poles : 4 poles
• Horsepower : ⅓HP » GENERAL CHARACTERISTICS
• Main Input Voltage : AC 220V, 3-phase
Simulation

• Motor Current : 1.7A Approx.

Software

• Indication Meter : 2-voltage, 2-current, 1-RPM(digital), 1-watt • Rating : 30 minutes

• Overload Trip : 2A • Dimension : 990(W) x 670(H) x 475(D)mm
• Weight : 91kg
» GENERATOR SECTION
• Winding Type : Shunt ACCESSORIES
• Speed : 1800 RPM
• Output Power : 120V, 1A
• Patch Cords(ø4 Plug) : 1set
Pneumatics
Hydraulics

• Number of Poles : 2 poles

• AC Power Cord : 1ea
• Field Excitation : Self-excited
• Reference Manual : 1ea

www.ed.co.kr 66

Part1. ed_english_catalog1_v1.indd 66 2014-02-25 �� 10:54:45

 • Electrical Machine

MG-5216 REPULSION MOTOR / DC GENERATOR

• Starting and drive characteristics of repulsion induction motor

• Lad characteristics of separately excited DC shunt wound generator

> EXPERIMENTS
• Start and driving characteristics of repulsion • RIM’s no-load power factor and load power factor
induction motor(RIM) • Load characteristics of separately excited DC shunt-wound generator
• Alteration of RIM’s rotative directions • No-load saturation characteristics of generator
• RIM’s load characteristics • DC shunt-wound generator’s loss and power factor

> SPECIFICATION
» MOTOR SECTION • Shunt Rheostat : 0 ~ 300Ω, 50W
• Winding Type : Repulsion Start, 2 Field Stator • Exciting Power : DC 0 ~ 120V, 1A
• Speed : 1750 RPM • Indication Meter : 2-current, 2-voltage
• Input Voltage : AC 220V, 60Hz • Overload Trip : 2A
• Input Current : 5A(110V), 2.5A(220V) • Load Resistance : 48Ω~480Ω, 500W
• Number of Poles : 4 poles
• Horsepower : ⅓HP » GENERAL CHARACTERISTICS
• Direction of Rotation : CW, CCW • Main Input Voltage : AC 220V, single phase
• Indication Meter : 1-voltage, 2-current, 1-RPM(digital), 1-watt • Rating : 30 minutes
• Overload Trip : 7A • Dimension : 960(W) x 670(H) x 480(D)mm
• Weight : 91kg
» GENERATOR SECTION
• Winding Type : Shunt(Separator) ACCESSORIES
• Speed : 1750 RPM
• Output Power : 120V, 1A
• Patch Cords(ø4 Plug) : 1set
• Number of Poles : 2 poles
• AC Power Cord : 1ea
• Field Excitation : Separately excited
• Experimental Manual : 1ea

67 Part1 Electricals / Electronics / Embedded

Part1. ed_english_catalog1_v1.indd 67 2014-02-25 �� 10:54:46

 • Electrical Machine
SQUIRREL CAGE INDUCTION MOTOR/
MG-5219

Electronics
Embedded

Electricals
ELECTRODYNAMOMETER
• Torque and load characteristics measurement by Electro-dynamometer
• Start and load characteristics of squirrel cage induction motor

Renewable
energy &
LED
Communication
IT/
Measurement
Test&
Automation

Intelligent
> EXPERIMENTS

Robot/
• Squirrel cage induction motor’s start characteristics and slip • Measurement of induction motor’s power efficiency
• Alteration of the rotative directions of squirrel cage induction • How to use electro-dynamometer
motor • Torque Measurements by dynamometer
• Induction motor’s slip speed and torque • Use of separately excited DC generator

> SPECIFICATION

Mechatronics
» MOTOR SECTION • Shunt Rheostat : 0~300Ω, 50W
• Winding Type • General Output : 120V DC, 2.4A
» Squirrel cage rotor • Exciting Power : DC 0~120V, 1A
» Split-phase stator • Indication Meter : 2-current, 2-voltage
• Speed : 1725 RPM • Overload Trip : Approx. 4A
• Input Voltage : AC 110V, 60Hz • Load Resistance : 48Ω~480Ω, 500W
• Input Current : 6.6A
» GENERAL CHARACTERISTICS
Simulation

• Number of Poles : 4 poles

Software

• Horsepower : 1/3 HP • Main Input Voltage : AC 220V, single phase

• Start Capacitor : 180~220μF • Rating : 30 minutes
• Indication Meter : 1-current, 1-voltage, 1-RPM(digital), 1-watt • System Size : 960(W) x 860(H) x 475(D)mm
• Overload Trip : 7A(Approx.) • Weight : 80kg

» GENERATOR SECTION ACCESSORIES

• Winding Type : Shunt(Separator)
Pneumatics
Hydraulics

• Speed : 1800 RPM • Patch Cords(ø4 Plug) : 1set

• Horse Power : 1/3 HP • AC Power Cord : 1ea
• Number of Poles : 2 poles • Reference Manual : 1ea

www.ed.co.kr 68

Part1. ed_english_catalog1_v1.indd 68 2014-02-25 �� 10:54:46

 • Electrical Machine

ED-5300 ELECTRICAL MACHINE TRAINER

• 19 types of Modules & Graphic Boards

• 25 types of Electrical Machine Assembly
• Experimental Board Rack & Storage Trolley

> EXPERIMENTS
» BASIC EXRERIMENTS ON GENERATOR » BASIC EXRERIMENTS ON MOTOR
• Principles of the generator • Principles of the motor
• Single-phase AC generator using permanent magnet • DC Motor using permanent magnet
• DC Generator using permanent magnet • DC series-wound motor using the field coil
• Separately excited DC shunt-wound generator by field coil • DC shunt-wound motor by starter and field resistor
• Self-excited DC shunt-wound generator by field coil • DC compound motor
• Generator’s no-load saturation • AC commutator motor(universal motor)
• Load characteristics of separately excited DC shunt-wound • Rotary field of 3-phase induction motor
generator • Squirrel cage induction motor
• Revolving field, single-phase AC shunt-wound generator • 2-step speed control of induction motor
• Load characteristics of AC generator • Repulsion motor
• Principles of 3-phase generator • Split-phase motor by condenser
• Revolving field, 3-phase AC generator • Polarized(shading coil type) motor
• Revolving armature-type 3-phase AC generator
• Principles of rotary converter

> SPECIFICATION

» EXPERIMENTAL BOARD RACK(BR-6) » EXPERIMENTAL MODULES LIST

• Installation Capacity : 8ea • NO-5301 Field Rheostat : 1ea
• Dimension : 1480(W) x 740(H) x 320(D)mm • NO-5302 Starting Rheostat : 1ea
• NO-5303 AC/DC Machine Load Unit : 1ea
• NO-5304 Three-Phase(Y-Δ) Load Unit : 1ea
» BOARD STORAGE CABINET(BS-20) • NO-5305 Variable R, L, C Load Unit : 1ea
• Storage Capacity : 13ea • NO-5306 AC/DC Power Supply : 1ea
• Dimension : 680(W) x 1080(H) x 450(D)mm • NO-5307 AC Volt/Ampere Meter : 1ea

69 Part1 Electricals / Electronics / Embedded

Part1. ed_english_catalog1_v1.indd 69 2014-02-25 �� 10:54:46

 • Electrical Machine

ED-5300 ELECTRICAL MACHINE TRAINER

Electronics
Embedded

Electricals
• NO-5308 DC Volt/Ampere Meter : 1ea • Compass : 1ea
• NO-5309 DC Milliammeter : 1ea • Belt for M/G : 1ea

Renewable
energy &
• NO-5310 AC/DC Machine Field Frame : 1ea • Fixing Bolt : 10ea

LED
• NO-5311 Auto Driving Unit : 1ea
• NO-5312 Pole Changing Unit : 1ea » GENERAL CHARACTERISTICS
• Input Voltage
» GRAPHIC BOARDS LIST » AC 220V(No-5306, No-5311)
• NO-5313 DC Machine Board : 1ea • Operating Temperature : 0~45˚C, below 80% R.H.
• NO-5314 Three-Phase Machine Board : 1ea • Dimension

Communication
• NO-5315 Rotary Convertor Board : 1ea » Module Size(A) : 170(W) x 302(H)mm : 7ea
• NO-5316 Compound Motor Board : 1ea » Module Size(B) : 340(W) x 302(H)mm : 5ea

IT/
• NO-5317 Speed Control of Induction Motor Board : 1ea » Graphic Board : 340(W) x 300(H)mm : 7ea
• NO-5318 Repulsion Motor Board : 1ea • System Weight : 110kg
• NO-5319 Split-Phase Motor Board : 1ea

» MACHINE PARTS LIST ACCESSORIES

• 3-Pole Rotor & Other Rotors : 6ea

Measurement
• Wide Magnetic Pole Pieces : 15ea
• Shunt Field & Various Field Coil : 10ea • Patch Cord(ø4 Plug Type) : 1set

Test&
• Permanent Magnet(Round Type) : 2ea • AC Power Cord : 2ea
• Brush & Brush Holder set : 3ea(built-in brush) • Experimental Manual : 1ea
• Supporter for Rotator and Stator : 12ea • Operation Manual : 1ea
• Filament Lamp(3/6/12V) : 15ea

Automation

Intelligent
Robot/
> COMPONENT LIST
» EXPERIMENTAL MODUL

Mechatronics
Simulation
Software
Pneumatics
Hydraulics

www.ed.co.kr 70

Part1. ed_english_catalog1_v1.indd 70 2014-02-25 �� 10:54:46

 • Electrical Machine

ED-5300 ELECTRICAL MACHINE TRAINER

> COMPONENT LIST

» EXPERIMENTALGRAPHIC BOARDS

» BOARD STORAGE CABINET

» MACHINE PARTS

> Optional Smart Learning NEW

(Contents-running System)
(Interface Board)

Wire LAN

Wireless

RS-232C

Bluetooth

USB (iOS,OSX) (Android) (MS Windows)

Middle ware Web server

USBContents
Any Device Interface Any Computer

• Smart Learning Contents Interactive with Hardware

• Compatible with All Operating System (iOS, Android, OSX, MS Windows, Linux etc)
• Multi-User Oriented Electronic Book Authoring Tool and Platform (E3) included.

71 Part1 Electricals / Electronics / Embedded

Part1. ed_english_catalog1_v1.indd 71 2014-02-25 �� 10:54:47

 • Electrical Machine

ED-4400B DC SERVO TRAINER

Electronics
Embedded

Electricals
• Analog Feedback Loop & DC servo system
• Modularized by the function of servo circuits
• Overload protection for the Servo Amp and power supply output
• Servo Motor with Tacho Generator and Speed Reduction Gear

Renewable
• PID Control Exercise [option : PID Control Module U-165]

energy &
LED
Communication
IT/
Measurement
Test&
Automation

Intelligent
Robot/
> EXPERIMENTS

Mechatronics
• Transient Characteristics of Servo Motor • Error Signal Detection and Closed Circuit’s Composition
• Response Characteristics • Position Control
• Speed Detection and Closed Circuit’s Composition • Closed Circuit’s Gain and Response Speed
• Steady Speed Control • Servo Circuit Applications
• Load Characteristics • PID Control(Option)
• Position Detection and Operational Amplification

> SPECIFICATION
Simulation
Software

• Servo System Method : Analog Feed-back Loop, DC Servo » AUXILIARY MODULES

• Circuit Composition : Modular System(10 Modules and • Function Generator U-162 : 1ea
Motor, Electronic Brake) • RPM Meter U-159 : 1ea
• Speed Control Range : 0.01 RPM~60 RPM • Magnet Brake U-163 : 1ea
(Reduction Ratio 60:1) » OPTION
• Position Resolution : Less than ±3˚ • PID Control Module U-165
• Operating Temperature : 0~45˚C , Below 85% R.H.
• Input Voltage
Pneumatics
Hydraulics

ACCESSORIES
» Modules : ±15V, 0.6A Max.(by DC Power Supply)
» System : AC 220V, 50~60Hz • Aluminum Brake Disk : 1ea
• Dimension • Inertia Flywheel Disc : 2ea
» Modules : 110(W) x 55(H) x 110(D)mm • Patch Cord(ø4 Plug) : 1set
» System case : 615(W x 175(H) x 470(D)mm • AC Power Cord : 1ea
• System Weight : 18.2kg • Experimental Manual : 1ea

www.ed.co.kr 72

Part1. ed_english_catalog1_v1.indd 72 2014-02-25 �� 10:54:47

 • Electrical Machine

ED-4400B DC SERVO TRAINER

> Motor/Generator/Load-Torque
» U-151 Attenuator » U-152 Summing Amp

The dual rotary type attenuator Performs add-up operations for the
consists of 10 steps and each step current of three circuits and experiments
reduces by 10%. on the gain and transfer characteristics.
• Input Resistance : 10kΩ x • Input Circuit : 3-input analog summing
10=100kΩ • Delay : Int./Ext.
• Attenuation : 10% x 10=100%

» U-153 Pre-Amp » U-154 Motor Drive-Amp

Designed to control DC offset This 10W DC differential amplifier

voltage and can control DC zero has overload protection circuits and
offset coming from the DC Amplifier. drives the Servo Motor.
• Offset Range : Approx. ±5V • Output Power : 15V 700mA Max.
• Gain : 20dB • Gain : 34dB Current Amp.

» U-155 Tacho Detector

Changes the tacho generator’s output in frequency-toconversion and makes the RPM
proportional DC voltage polarized in (+) or (-) output along the motor’s rotational direction.
• Input : AC 1~1200Hz, 0~3V
• Output : DC ±0~15V
• Polarity Sensitivity : Less than 0.1V

» U-156 Power Supply

Supplies power to the Servo Motor and other systems with overprotected DC outputs. The
mounted ammeter shows current status of the motor’s load.
• Output : ±15V 0.2A(for modules), ±15V 0.5A(for motor)
• Protection : Overload and short circuit protection
• Input Voltage : AC 220V, 50/60Hz

» U-157/U-158 Potentiometer
The 360˚ rotary scales are mounted on this precision potentiometer for position setup and
detection.
• Input Resistance : 1/10kΩ
• Input Voltage : 30V Max.
• Resolution : Less than 1/1000 Division
• Power Dissipation : 2W at 25˚C

73 Part1 Electricals / Electronics / Embedded

Part1. ed_english_catalog1_v1.indd 73 2014-02-25 �� 10:54:47

 • Electrical Machine

ED-4400B DC SERVO TRAINER

Electronics
Embedded

Electricals
> Motor/Generator/Load-Torque
» U-159 RPM Meter » U-161 DC Servo Motor

Renewable
energy &
This RPM Meter is used together with Consists of the speed reduction gear and the

LED
U-155 Tacho Detector, and it indicates tacho generator.
the Servo Motor’s RPM along the • Input Voltage : DC 12V, 4.5W Max.
output of Tacho Detector. • Tacho Output : about 3Vp-p(at 4000RPM)
• Max. Indication : 4000 RPM • RPM : 5000 Max.
• Input Impedance : Approx. 150kΩ • Gear Ratio : 60:1 Down Speed

Communication
IT/
» U-162 Function Generator

Generates Square Wave for experiments on the motor’s response speed and transient
characteristics. Also, it provides Ramp outputs for timing axis.
• Frequency Range : 0.1~1Hz, 1~10Hz

Measurement
• Output : DC 15Vp-p

Test&
» U-163 Magnet Brake
The Magnet Brake has rotational load by eddy currents presented to the aluminum rotational

Automation

Intelligent
disk which is mounted on the motor’s high speed axis.

Robot/
• Magnet Power : 5~500AT variable
• Magnet Air-gap : 4mm
• Input Voltage : AC 220V, 50/60Hz

Mechatronics
NEW
> Optional Smart Learning
(Contents-running System)
(Interface Board)

Wire LAN

Wireless

RS-232C

Bluetooth

USB
Simulation

Middle ware Web server (iOS,OSX) (Android) (MS Windows)

Software

USBContents
Any Device Interface Any Computer

• Smart Learning Contents Interactive with Hardware

• Compatible with All Operating System (iOS, Android, OSX, MS Windows, Linux etc)
• Multi-User Oriented Electronic Book Authoring Tool and Platform (E3) included.
Pneumatics
Hydraulics

www.ed.co.kr 74

Part1. ed_english_catalog1_v1.indd 74 2014-02-25 �� 10:54:47

 • Electrical Machine

ED-4270M SERVO UNIT TRAINER

• Experiments on various types of special control unit

• Characteristics of Servo Motor and setup of Servo Driver
• Essential components in automation using a PLC position module
• 4mm banana jack to increase wiring capability

> EXPERIMENTS
• Determination of the position • Wiring between Servo Motor and Programmable Logic
• Setup of the position unit and parameter Controller
• Characteristics of Servo Motor and setup of the Servo Driver • Speed, Torque and Position control operation

> SPECIFICATION
• Control Circuit • Resolution Per Rotation
» Single Phase AC200~230V, 50/60Hz » Power Circuit Breaker / Switch (circuit protection function)
» 50W • Speed Control Mode
• Method of Control : Sine wave PWM control » Interface Terminal(2ea)
• Maximum Input Frequency (Pulse) » RS-232C for Position Card/PC
» 500kpps(Differential Receiver) • Power Supply
» 200kpps(Open Collector)) » Free Voltage 50/60Hz
• Resolution Per Rotation : 131072p/rev » Output : DC24V/2.5A
• Speed Control Mode » Built-in Protection Circuit
» Analog Speed 1:2000
» Internal Speed 1:5000 MAIN STRUCTURE
» DC 0~±10V/rotational speed • Ball Screw : 16 x 10R
• Torque Control Mode • Guide Unit : 1LM
» DC 0~±8V/torque • Scale Unit : 300mm
• Sensor : Limit detection, Home positioning
SERVO MOTOR
• Power Facilities Capacity : 0.3kVA
• Rating Output Capacity : 50W ACCESSORIES
• Rating Rotational Speed : 3000(r/min)
• Max. Rotation Speed : 4500(r/min) • AC Power Cord • Connector Cable for CN3A
• Max. Current : 2.2(A) • Cable / Connector for CN1A • PC Connection Cable
• Encoder Cable Connector • 4mm Cable Set
CONTROL PANEL for CN2 • User Manual
• Control Circuit
» Display of the circuit diagram on the panel
» Wiring practices for external I/O and control
• Method of Control : 4mm terminal OPTION
• Maximum Input Frequency(Pulse)
» AL2t(Panton 427C coating) • Smart Learning Contents : E3
» Surface film strengthened By coating and heat treatment

75 Part1 Electricals / Electronics / Embedded

Part1. ed_english_catalog1_v1.indd 75 2014-02-25 �� 10:54:48

 • Electrical Machine

ED-4280M INVERTER TRAINER

Electronics
Embedded

Electricals
• Aluminum hard case structure for mobility
• Applied experiments on the motor’s rotation characteristics
• AC motor control technology using the inverter
• Interlocking experiments with Programmable Logic Controller

Renewable
energy &
LED
Communication
IT/
Measurement
Test&
Automation

Intelligent
Robot/
> EXPERIMENTS
• Definition of Inverter • Torque operation
• Inverter menu setup • Acceleration and deceleration
• Preparation of the Inverter before operation • Forward/Reverse operation
• Connection to the AC Motor • Frequency operation

Mechatronics
> SPECIFICATION
INVERTER • Circuit Diagram : Displays on the surface of panel
• Control Method : Soft-PWM • Circuit Protection : Power Circuit Breaker /Switch
• Output Frequency : 0.2~400Hz • Photo Sensor : Detects speed deceleration, DC24V
• Voltage/Frequency : Baseband 0~400Hz • Rotary Encoder : 80mm
• Starting Torque : 150%(at 1Hz), 200%(at 3Hz) • Protective Cover : Transparent acryl
• Torque Boost : 0~30% configurable • Terminal : DC 4mm terminal, AC protective terminal
• Capacity(kW) : 0.4(25W) • Case : Aluminum hard case, upholstery EGI 1.2t
Simulation
Software

• Input Voltage : 1-phase AC 200V~240V 50/60Hz

AC MOTOR
• Pole : 3-phase ACCESSORIES
• Capacity : 25W
• Voltage : 220V • AC Power Cord : 1ea
• Hertz : 50/60Hz • Connection Cable : 1set
• Speed : 1200RPM • User Manual : 1ea
Pneumatics
Hydraulics

MAIN PANEL
• Power : AC220V
• Power Supply OPTION
» Free Voltage 50/60Hz
» Short Circuit Protection(Built-in) • Smart Learning Contents : E3
» Built-in NBF

www.ed.co.kr 76

Part1. ed_english_catalog1_v1.indd 76 2014-02-25 �� 10:54:48

 • Electrical Machine

ED-4301 STEPPING MOTOR TRAINER

• Graphical display of functonal block diagram on the system suface

• Real-time monitoring and control by PC Control Program
• LM Guide and Rotary Encoder for position control
• Displays moving distance and angle data using LCD

> EXPERIMENTS
• Position control by step operation • Dynamic torque characteristics of stepping motor using
• Position control by continuous operation frequency modulation
• Angle control by step operation • Wave form measurement using oscilloscope
• Angle control by photo sensor • Speed control by control S/W
• Characteristics by phase excitation changes • Angle control by simulation S/W

> SPECIFICATION
COMPUTER CONTROL
MANUAL CONTROL
• Step/continuous operation by Control Program
• Step/continuous operation by the values set manually
• Direct/reverse rotation operation by Control Program
• Direct/reverse rotation operation by the values set manually
• Output pulse frequency operation by Control Program
• Output pulse frequency Operation by the values set manually
• On-line, real time control by RS-232C

STEPPING MOTOR : 2EA

• 2-phase HB type, unipolar operation, 0~2000PPS ACCESSORIES
• PWM constant-current driver
• LM GUIDE operation(position control) and Circular Board • PC Software : 1ea
operation(angle control) • AC Power Cord : 1ea
• Experimental Manual : 1ea
• LM GUIDE(1set)
» Ball screw distance : Over 200mm
» Protection Circuit By Photo Sensor for exceeding the range
Rotary Encoder OPTION
» 400/Rev, built-in signal output terminal
• Smart Learning Contents : E3
» LCD display device(rotation angle and motion step indication)

77 Part1 Electricals / Electronics / Embedded

Part1. ed_english_catalog1_v1.indd 77 2014-02-25 �� 10:54:48

 • Electrical Machine

ED-4302 DC SERVO MOTOR TRAINER

Electronics
Embedded

Electricals
• 100W DC Servo Motor with a built-in encoder
• Graphical display of functional block diagram on the surface
• Speed and angle control by step operation and photo sensor
• Display of the rotational speed and angle data using LCD

Renewable
energy &
• PC control and waveform output functions

LED
• Portable type with Aluminum Carrying Case

Communication
IT/
Measurement
Test&
Automation

Intelligent
Robot/
> EXPERIMENTS
• Principles of Servo Motor’s rotation • Control system of Servo Motor

Mechatronics
• Characteristics of P control • Characteristics of PID control
• PWM circuit for current control • Brake’s load characteristics
• Characteristics of PI control • Position control by potentiometer’s feedback

> SPECIFICATION
CONTROL UNIT • Complimentary type amplifier with high power for two-way
• Servo operation by reading in the input per control block direction control
• Speed control by the change of output pulse frequency • A/D Converter (Built-in) : 4 channels
Simulation
Software

• Encoder output and various types of output pulse • D/A Converter (Built-in) : 1 channel
measurement • Eddy Current Type Break (built-in)
• Position and speed control by feedback • Rotary Encoder (built-in Motor)
• Built-in voltmeter and wattmeter • 500/Rev.
• Monitors and controls the characteristics of operation by • Signal Output Terminal (built-in)
the software • LCD display device indicating the rotational angle and speed
• Measures the motor’s load characteristics using a brake
Pneumatics

DC SERVO MOTOR
Hydraulics

• Rating Output 100W, Built-in Encoder, 0~3000RPM : 1ea ACCESSORIES

OPERATING UNIT • AC Power Cord : 1ea

• PWM constant-current operation • Program CD : 1ea
• Controls forward/reverse rotation by the positive supply • User Manual : 1ea
voltage input

www.ed.co.kr 78

Part1. ed_english_catalog1_v1.indd 78 2014-02-25 �� 10:54:48

 • Electrical Machine

ED-4303 AC SERVO MOTOR TRAINER

• Experiments on Servo Motor control techniques using Servo Driver

• Aluminum carrying case for convenient storage and mobility
• JOG operation, PLC control operation, PC control operation
• Various types of control elements easily to be mounted
• Capable of checking normal operating voltage / over current by voltmeter and ammeter

> EXPERIMENTS
• Uniformity starting point using APM • ZONE/POINT operation using APM
• Velocity and position control using APM • Limit detection and return to starting point using MMC
• Operation mode using APM • Velocity and position control using MMC

> SPECIFICATION
SAMSUNG CSMT (100W CLASS) MOTOR • Frequency Alteration : 550Hz
• Rated Output • Acceleration/Deceleration Time Constants Setting
» Single Phase : AC 220V 100W » 0~60 sec
» Rating/Max. Speed : RPM 3000 • Input Signal : Sine+Pulse, 90˚ phase difference
» Current (Continuous) : 1.0A, Max. 3.0A • Pulse Types : 2-phase Pulse (A+B), CCW Pulse, CW Pulse
» Max. Torque : 9.7kgf·cm, 0.95N·m • Pulse Forms
» Weight : 0.4 kg » Line Drive(+5V), Open Collector(+5, +12V, +24V)
» Applied Encoder : 17bit Serial Encoder (Incremental,
Absolute)

SAMSUNG CSDJ SERIES SERVO DRIVER ACCESSORIES

Small-sized, light-weighted, and power source-integrated
product in full digital method using 32-bit high speed DSP • APM Cable : 1ea
• Main Circuit Power Source • PLC I/O Cable : 2ea
» 3-Phase 220V(+10%, -15%, 50/60MHz) • TIP Jack Connection Cable : 1set (Black : 20ea, red : 20ea)
• Power Source • JOG Operator : 1ea
» Single Phase 220V(+10%, -15%, 50/60MHz) • Program CD : 1ea
• Control Type : PWM control using IPM • AC Power Cord : 1ea
• Encoder • Operating Manual : 1ea
» 2048/2500/10000 Pulse/Rev. (Incremental, Absolute)
• Dynamic Brake
» Servo/Controller off
» Operable with the built-in alarm activated OPTION

SAMSUNG CSDJ SERIES SERVO DRIVE CONTROL • Smart Learning Contents : E3

• Velocity Control Range : 1 : 5,000

79 Part1 Electricals / Electronics / Embedded

Part1. ed_english_catalog1_v1.indd 79 2014-02-25 �� 10:54:49

 • Electrical Machine

ED-4304 INVERTER MOTOR TRAINER

Electronics
Embedded

Electricals
• Practical training on inverter and 3-phase induction motor operations
• Control experiments using a PLC module (in use of D/A module)
• Feasible contact-type PLC control
• Carrying case type structure for convenient storage and mobility

Renewable
energy &
LED
Communication
IT/
Measurement
Test&
Automation

Intelligent
> EXPERIMENTS

Robot/
• Basic operation practice using Loader and Termina • Sequence experiments using Timer and self-sustain circuits
• Control experiments using Programmable Logic Controller

> SPECIFICATION
• 0.5HP class single-phase inverter & ¼HP class AC geared motor • Frequency Setting
• Digital MMI, Trip-less operation, shortest/optimum » Analog : 0~ 10V/4~20mA

Mechatronics
acceleration and deceleration functions » Digital : Maneuver by Keypad
• Built-in functions such as PID control and reliable operation
• Built-in RS485 as standard AC GEARED MOTOR
• Rated Output : ¼HP, 0.2kW
IG5 INVERTER(LS INDUSTRIAL) • Input Voltage : 3-phase 220/380V
• Maximum Applicable Motor : 0.5HP, 0.4kW • Rated Current : 1.1/0.64A
• Output Rating • Frequency : 60Hz
» Rating Capacity : 0.95kVA
• Weight : 6kg
• Speed : 1720RPM
» Rated Current : 2.5A
• Speed Decelerator : 10:1
Simulation

» Output Frequency : 0.1~400Hz

Software

» Output Voltage : 3-phase 220~230V

• Input Rating ACCESSORIES
» Voltage : 1-phase 200~230V(+10%, -15%)
» Frequency : 50Hz~60Hz(±5%) • PLC I/O Cable : 2ea
• Inverter Weight : 0.77kg • TIP Jack Connection Cable : 1set(Black : 20ea, Red : 20ea)
• Control Method : VF Type • Induction Motor(3-phase, 1/2 Horse Power) : 1ea
• Frequency Setting Resolution • Program CD : 1ea
» Digital : 0.01Hz(below 100Hz), 0.1Hz(over 100Hz)
Pneumatics

• AC Power Cord : 1ea

Hydraulics

» Analog : 0.03Hz/60Hz
• Operating Manual : 1ea
• Frequency Measure
» Digital : 0.01% of Max. Output Frequency
» Analog : 0.1% of Max. Output Frequency
• VF Ratio
OPTION
» Linear, 2nd degree speed reduction, User V/F
• Smart Learning Contents : E3
• Operation Method
» Selectable : Keypad, Terminal, Communication

www.ed.co.kr 80

Part1. ed_english_catalog1_v1.indd 80 2014-02-25 �� 10:54:49

 • Electric Power Tx Line

ED-2070 POWER TRANSMISSION TRAINER

• With the ED-2070 training equipment, it’s possible to learn how to compose an absolute electric
power transmission system. A variety of measurement can be processed by use of ED-2070 power
transmission trainer, no load operation wth natural load, symmetric/asymmetric short circuit, parallel/
series compensation of the transmission line as well as neutral-point connection.

> EXPERIMENTS
• Description of the experiment components and measurement instruments
• Safety measures, model scale
• Experiments on the transmission line performance
• Performance at no-load
• Matched-load performance characteristics
• Performance characteristics of an ohmic-inductive and pure inductive load
• Performance characteristics of an ohmic-capacitive and pure capacitive load
• Experiments on the various methods of earthing
• Fault to earth with isolated neutral point connection
• Influence of earth-fault neutralizers
• Experiments on compensation
• Parallel compensation
• Series compensation
• Experiment circuit for verifying the motor load

81 Part1 Electricals / Electronics / Embedded

Part1. ed_english_catalog1_v1.indd 81 2014-02-25 �� 10:54:49

 • Electric Power Tx Line

ED-2070 POWER TRANSMISSION TRAINER

Electronics
Embedded

Electricals
> SPECIFICATION
ED-2070-1 Three Phase Transformer TL 380KV

Renewable
• Transformer to feed the transmission line mode 380kV. Scale factor

energy &
1:1000 for secondary current and voltage.

LED
• Normal Power: 800VA
• Primary
» 3x400V winding with tapping at 230V, can be switched to star or delta
connection.
• Secondary

Communication
» 3x380V winding with tappings at 5%, -5%, -10%, -15% in star
connection, various star point connections available.

IT/
• Package: Rack-mount type

ED-2070-2 Transmission Line Model 380KV

• Three-phase model of 380kV overhead Tx line. To measure steady state

Measurement
operating conditions (no-load, matching, short-circuit) with the following
specifications: Quad bundle 4x240/40, with surge impedance 240 and

Test&
natural load 600MW, length 360km. During symmetric operation
tappings enable the carrying out of investigations at lengths of 144km
resp. 216km. Earth return line Re=11 and Le=250mH for asymmetric load at
360km line length. Scale factor : 1/1000 for current and voltage.
• Length : 360km 216km 144km
• Resistance : 13 Ohm 8 Ohm 5 Ohm

Automation
• Inductance : 290mH 174mH 116mH

Intelligent
Robot/
• Capacity : 5μF 3μF 2μF
• Package : Rack-mount type

ED-2070-3 Transmission Line Capacitor 380KV

Mechatronics
• Three-phase in star connection, 2.5μF each, corresponds to 50% of the operating
capacitance of transmission line model 380kV
• Package : Rack-mount type

Simulation
Software

ED-2070-4 Power Circuit Breaker Module

• Three-phase ON/OFF switch with AUX contact (NC) for transmission line
mode 380kV. Can be controlled manually using ON/OFF pushbutton or
externally via switching contact, 4mm sockets.
Pneumatics
Hydraulics

• Control input for external switch-off command (tripping on faults).

• Contact load capacity : 400VAC, 3A
• Main connection
» 115/230V, 50Hz with main connecting cable and earth-pinplug
• Package : Rack-mount type

www.ed.co.kr 82

Part1. ed_english_catalog1_v1.indd 82 2014-02-25 �� 10:54:50

 • Electric Power Tx Line

ED-2070 POWER TRANSMISSION TRAINER

ED-2070-5 Earth Fault Compensation

• Inductance with 20 tappings for earth fault compensation in the 380kV Tx line model.
• Inductance : 0.005 ~ 2H
• Rated voltage : 220V, 50Hz
• Rated Current : 0.5A
• Package : Rack-mount type

ED-2070-6 Excitation Voltage Controller

• DC power supply unit suitable to supply 0~220Vdc, 0~2A adjustable for excitation voltage
in synchronous as generator operation
• Package : Rack-mount type

ED-2070-7 Resistive Load

• Composed of three resistances with possibility to connect in star/delta or parallel,

controlled by three switched with 7 steps variable per phase
• Max Power : 1200 watt
• Voltage : 280/220V (star/delta)
• Package : Rack-mount type

ED-2070-8 Inductive Load

• Composed of 3 inductances with possibility to connect in star/delta or parallel. Each inductance with 8 inductance values
(4.8H/0.5A, 2.4H/0.25A, 1.2H/0.5A, 1.0H/0.5A, 0.8H/0.5A, 0.6H/0.65A, 0.4H/0.65A, 0.2H/0.65A)

83 Part1 Electricals / Electronics / Embedded

Part1. ed_english_catalog1_v1.indd 83 2014-02-25 �� 10:54:50

 • Electric Power Tx Line

ED-2070 POWER TRANSMISSION TRAINER

Electronics
Embedded

Electricals
ED-2070-9 Capacitive Load
• Composed of 3 capacitances with possibility to connect in star/delta or parallel.

Renewable
Each capacitance with 4 capacitance values (2μF/450VAC, 4μF/450VAC, 8μF/450VAC,

energy &
16μF/450VAC)

LED
• Package : Rack-mount type

Communication
IT/
ED-2070-10 Three Phase Power Supply
• The unit has been designed to provide all fixed and variable AC suppliers which is
necessary in laboratory to perform the experimental required and work project.
The unit is contained in a metal housing with clear front panel identification and

Measurement
4mm sockets that make its easy and safe. Provided with start/stop pushbutton,

Test&
emergency mushroom head pushbutton switches and protection.
• 3-Phase AC Adjustable Output : 3x0 ~ 380V
• 3-Phase AC Fixed Output : 220/380V
• Power Requirement : 220/380V

Automation

Intelligent
Robot/
ED-2070-11 Inverter Unit
• Three phase asynchronous motor speed control by PWM technique. The torque
and speed are able to be constant via the unit to easy control in testing operation
during loads change.
• Input Voltage : 380V
• Output Voltage : 0 ~ 380V
• Output Frequency : 1 ~ 300Hz

Mechatronics
• Max Power : 1.5kW
• Power Requirement : 220/380V
• Package : Rack Mount Type

SM-250-3 Three Phase Synchronous Machine / IM-250-3 Three Phase Inductance (Squirrel Cage) Motor
Three Phase Synchronous Machine (SM-250-3)
Simulation
Software

• Synchronous machine with three phase winding both stator and rotor for operation
either as motor or as generator
• Winding Type : Synchronous Machine • Speed : 1450 ~ 1750 RPM
• Input Power : 208/220V, 3-Phase 4 Wires • Frequency : 50/60Hz
• Horse Power : 1/3 HP • Motor Current : 1.7A Approx.
• Package : Rack Mount Type
Three Phase Inductance (Squirrel Cage) Motor (IM-250-3)
Pneumatics
Hydraulics

• Three phase winding induction motor with squirrel cage rotor.

• Winding type : Shunt
• Speed : 1450 ~ 1725 RPM
• Output Power : 100/120V, 1A
• Field Exc. : Self Exciting
• Shunt Rheostat : 0 ~ 300Ω, 50W

www.ed.co.kr 84

Part1. ed_english_catalog1_v1.indd 84 2014-02-25 �� 10:54:50