Scribd
Upload
169 views7 pages

Mini Project Report Format

This document is a project report submitted by four students to partially fulfill requirements for a mini project at Shree L. R. Tiwari College of Engineering. The report details the students' work on a project titled "Name of Project" under the guidance of Name of Guide. It includes an abstract, introduction, block diagram, hardware/software schemes, PCB layout, testing/results, conclusion, applications, and future scope. Certification is provided that the students have successfully completed the mini project requirements.

Uploaded by

Sanjana Kahar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
169 views7 pages

Mini Project Report Format

This document is a project report submitted by four students to partially fulfill requirements for a mini project at Shree L. R. Tiwari College of Engineering. The report details the students' work on a project titled "Name of Project" under the guidance of Name of Guide. It includes an abstract, introduction, block diagram, hardware/software schemes, PCB layout, testing/results, conclusion, applications, and future scope. Certification is provided that the students have successfully completed the mini project requirements.

Uploaded by

Sanjana Kahar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 7

Mini Project Report on

NAME OF PROJECT
for

Mini Project 1A (REV- 2019 ‘C’ Scheme) of Second Year, (SE Sem-III)
In

Electronics & Telecommunication Engineering

SUBMITTED BY

NAME OF STUDENT 1 (ROLL NO.)

NAME OF STUDENT 2 (ROLL NO.)

NAME OF STUDENT 3 (ROLL NO.)

NAME OF STUDENT 4 (ROLL NO.)

UNDER GUIDANCE OF
NAME OF GUIDE

DEPARTMENT OF ELECTRONICS AND TELECOMMUNICATION ENGINEERING

SHREE L. R. TIWARI COLLEGE OF ENGINEERING,


KANAKIA PARK, MIRA ROAD (E) – 401 107

UNIVERSITY OF MUMBAI
Academic Year 2022–2023
UNIVERSITY OF MUMBAI

AY 2022-2023

Shree L. R. Tiwari college of Engineering


CERTIFICATE
This is to certify that the requirements for the Mini Project entitled
“Name of Project” have been successfully completed by following SE/T.E.
Electronics and Telecommunication students.

NAME OF STUDENT 1 (ROLL NO.)

NAME OF STUDENT 2 (ROLL NO.)

NAME OF STUDENT 3 (ROLL NO.)

NAME OF STUDENT 4 (ROLL NO.)

in partial fulfillment of Mumbai University in the Department of


Electronics and Telecommunication, Shree L. R. Tiwari College of
Engineering, Mira Road (E) – 401107 for Academic year 2022 - 2023.

Internal Examiner External Examiner

( Mr. Mrs. XYZ) Mrs. Aboli Moharil


Guide H.O.D. EXTC
ACKNOWLEGDEMENT

Special thanks to our Guide Mrs. Name of Guide for assisting us to partially

complete our Mini Project on “Name of Project”.

His / Her expertise and talent in designing and troubleshooting projects helped us
effectively to partially complete this project.

We'd like to express our gratitude to Mr. Aditya Desai sir, our Project Coordinator
(Mini Project), for guiding us through the process to fulfil Mumbai University's Mini
Project requirements.

Special thanks to Head of Department Mrs. Aboli Moharil madam for her
constant motivation, without which this work would not have become successful.

We are also thankful to our Principal Dr. Deven Shah sir for his continuous
encouragement throughout the process.

We would also like to thank our Electronics and Telecommunication


Department for providing us online/offline facility and labs, which helped us constantly
in increasing our technical knowledge, and to write this report.
INDEX

Page No.
Abstract (not exceeding 500 words)

1. INTRODUCTION
Abstract (not exceeding 500 words)
Objective
General Overview of Project
2. BLOCK DIAGRAM
3. HARDWARE SCHEME (If applicable)
Circuit Diagram
Circuit Diagram Description
Component List
4. SOFTWARE SCHEME (If applicable)
Database
Flow Chart
Program Algorithm
5. PCB LAYOUT (If applicable)
Track side
Component side
6. PCB DESIGNING (If applicable)
7. TESTING/RESULT AND ANALYSIS
8. CONCLUSION
9. APPLICATION
10. FUTURE SCOPE
11. REFERENCE (IEEE FORMAT)

General Instructions
1 Text should be printed on front and correct side of the watermark on
quality bond paper
Paper size- A4, 70 to 85 gsm paper
Margins: Top-1”, Bottom-1”, Left -1.5”, Right- 1”
2 Font: Times New Roman
▪ Font Size For Chapter heading -14(Bold upper case)
▪ Font Size For main titles -12(Bold upper case)
▪ Font Size For Subtitles -12(Bold Title case)
▪ Font Size For Text Matter -12
▪ Line Spacing -1.5 Lines
▪ Figure/Photo/Graph Caption: Figure/Photo/Graph should be
Central align to page. Figure/Photo/Graph caption should be below
the Figure/Photo/Graph, left align to Figure/Photo/Graph in Title
case, 10 TNR, Bold.
▪ Table Caption: Table should be Central align to page. Table
caption should be above the Table, center align to Table in Title
case, 10 TNR, Bold.
▪ Figure/Table/Photo/Graph Should Be Numbered Chapter Wise As
Fig 1.1, 1.2, 2.1
▪ Text: Main Title No’s should be 1.1, 1.2 etc for chapter no 1, 2.1
2.2 for chapter 2 etc. Subtitle 1.1.1, 1.1.2 etc.
▪ Reference of Figure Should Be Given In Text Matter

▪ Total Number of Typed Pages Shall be minimum 40


Abstract

Start writing here……………..


i) All Font – Times New Roman
ii) Font Sizes
a) Main Heading – 20. (Bold, Underline)
b) Sub Heading – 16. (Bold, Underline)
c) Text - 12.

INTRODUCTION
Start writing here……………..
iii) All Font – Times New Roman
iv) Font Sizes
d) Main Heading – 20. (Bold, Underline)
e) Sub Heading – 16. (Bold, Underline)
f) Text - 12.

References
For Books:-
Name of Author, "Title of Book", Name of Publisher, Vol. No., Year of
Publication,
Page no.
Example:
Singiresu Rao, "The FEM in Engineering", BH Publication, 3rd
Edition,1998, PP-
22-30.

You might also like