TLB

WEIGHT TRANSMITTER

Instrument
CANADA
Manager

DESCRIPTION INPUTS/OUTPUTS AND COMMUNICATION

 Weight transmitter suitable for back panel mounting on Omega/DIN rail.  RS485 serial port for communication via protocols ModBus RTU,
 Space-saving vertical shape. ASCII Laumas or continuous one way transmission.
 Dimensions: 115x25x120 mm.  3 relay outputs controlled by the setpoint values or via protocols.
 6-digit semi-alphanumeric red LED display (8 mm height).  2 optoisolated PNP digital inputs: status reading via serial
communication protocols.
 6 signalling LED.
 Four buttons for the system calibration.  1 load cell dedicated input.
 Removable screw terminal blocks.
 The instrument can be configured and managed using the free
“Instrument Manager” PC software, which you can download from
www.laumas.com.

FIELDBUSES
Re v. 0. 0

LAUMAS Elettronica srl • Phone: (+39) 0521 683124 • Fax (+39) 0521 681091 ISO 9001
UFFICIO VENDITE ITALIA: [email protected] • EXPORT SALES DEPARTMENT: [email protected] ISO 14001 www.laumas.com
 TLB
WEIGHT TRANSMITTER

DESCRIPTION CODE

RS485 serial port.

TLB485
Baud rate: 2400, 4800, 9600, 19200, 38400, 115200 (bit/s).

Optoisolated 16 bit analog output.

Current: 0÷20 mA; 4÷20 mA (up to 300 Ω).
TLB
Voltage: 0÷10 V; 0÷5 V; ±10 V; ±5 V (min 10 kΩ).
Equipped with RS485 serial port.

CANopen port.
Baud rate: 10, 20, 25, 50, 100, 125, 250, 500, 800, 1000 (kbit/s).
TLBCANOPEN
The instrument works as slave in a synchronous CANopen network.
Equipped with RS485 serial port.

DeviceNet port.
Baud rate: 125, 250, 500 (kbit/s).
TLBDEVICENET
The instrument works as slave in a DeviceNet network.
Equipped with RS485 serial port.

CC-Link port.
Baud rate: 156, 625, 2500, 5000, 10000 (kbit/s).
TLBCCLINK
The instrument works as Remote Device Station in a CC-Link network and
occupies 3 stations. Equipped with RS485 serial port.

Profibus DP port.
Baud rate: up to 12 Mbit/s.
TLBPROFI
The instrument works as slave in a Profibus DP network.
Equipped with RS485 serial port.

Modbus/TCP port.
Type: RJ45 10Base-T or 100Base-TX (auto-sensing).
TLBMODBUSTCP
The instrument works as slave in a Modbus/TCP network.
Equipped with RS485 serial port.

Ethernet TCP/IP port.

Type: RJ45 10Base-T or 100Base-TX (auto-sensing).
TLBETHETCP
The instrument works in an Ethernet TCP/IP network and it is accessible via
web browser. Equipped with RS485 serial port.

2x Ethernet/IP ports.
Type: RJ45 10Base-T or 100Base-TX (auto-sensing).
TLBETHEIPN
The instrument works as adapter in an Ethernet/IP network.
Equipped with RS485 serial port.

2x Profinet IO ports.
Type: RJ45 100Base-TX.
TLBPROFINETION
The instrument works as device in a Profinet IO network.
Equipped with RS485 serial port.

2x EtherCAT ports.
Type: RJ45 10Base-T or 100Base-TX (auto-sensing).
TLBETHERCAT
The instrument works as slave in an EtherCAT network.
Equipped with RS485 serial port.

2x POWERLINK ports.
Type: RJ45 10Base-T or 100Base-TX (auto-sensing).
TLBPOWERLINK
The instrument works as slave in a Powerlink network.
Equipped with RS485 serial port.

2x SERCOS III ports.

Type: RJ45 10Base-T or 100Base-TX (auto-sensing).
TLBSERCOS
The instrument works as slave in a Sercos III network.
Equipped with RS485 serial port.
Re v. 0. 0

LAUMAS Elettronica srl • Phone: (+39) 0521 683124 • Fax (+39) 0521 681091 ISO 9001
UFFICIO VENDITE ITALIA: [email protected] • EXPORT SALES DEPARTMENT: [email protected] ISO 14001 www.laumas.com
 TLB
WEIGHT TRANSMITTER

CERTIFICATIONS

OIML R76:2006, class III, 3x10000 divisions, 0.2 μV/VSI / OIML R61 - WELMEC Guide 8.8:2011 (MID)

UL Recognized component - Complies with United States and Canada standards

Complies with the Eurasian Customs Union standards

Equivalent of the CE marking for the United Kingdom

Complies with United Kingdom regulations for legal for trade use

CANADA
Measurement Canada - nmax 5000 - Class III - Complies with Canadian regulations for legal for trade use

NTEP - nmax 5000 - Class III - Complies with United States regulations for legal for trade use

CERTIFICATIONS ON REQUEST

Conformity assessment (initial verification) in combination with Laumas weighing module ( - )

TECHNICAL FEATURES

Power supply and consumption 12÷24 VDC ±10%; 5 W

Number of load cells • Load cells supply up to 8 (350 Ω) - 4/6 wires • 5 VDC/120 mA
Linearity • Analog output linearity (only for TLB) <0.01% full scale • <0.01% full scale
Thermal drift • Analog output thermal drift (only for TLB) <0.0005% full scale/°C • <0.003% full scale/°C
A/D Converter 24 bit (16000000 points) - 4.8 kHz
Divisions (with measurement range ±10 mV and sensitivity 2 mV/V) ±999999 • 0.01 μV/d
Measurement range ±39 mV
Usable load cells sensitivity ±7 mV/V
Conversions per second 300/s
Display range ±999999
Decimals • Display increments 0÷4 • x1 x2 x5 x10 x20 x50 x100
Digital filter • Readings per second 10 levels • 5÷300 Hz
Relay outputs 3 - max 115 VAC/150 mA
Optoisolated digital inputs 2 - 5÷24 VDC PNP
Serial ports RS485
Baud rate 2400, 4800, 9600, 19200, 38400, 115200 (bit/s)
16 bit = 65535 divisions. 0÷20 mA; 4÷20 mA (up to 300 Ω)
Optoisolated analog output (only for TLB)
0÷10 V; 0÷5 V; ±10 V; ±5 V (min 10 kΩ)
Humidity (condensate free) 85%
Storage temperature -30 °C +80 °C
Working temperature -20 °C +60 °C

Relay outputs 3 - max 30 VAC, 60 VDC/150 mA

Working temperature -20 °C +60 °C
Equipment to be powered by 12-24 VDC LPS or Class 2 power source

METROLOGICAL SPECIFICATIONS OF
OIML NTEP
TYPE-APPROVED INSTRUMENTS
EU: 2014/31/UE; OIML R76:2006; EN45501:2015 USA: NIST HANDBOOK 44, 2020;
Applied standards by region NCWM PUB 14, 2021
United Kingdom: Non-automatic Weighing
Instrument Regulations 2016 Canada: Weights and Measures Regulations, 2019

Operation modes single interval, multi-interval single interval, multi-interval

Accuracy class III or IIII III

Maximum number of scale verification divisions 10000 (class III); 1000 (class IIII) 5000 (class III)

Minimum input signal for scale verification division 0.2 μV/VSI

Working temperature -10 °C +40 °C -10 °C +40 °C (+14 °F +104 °F)

Re v. 0. 0

LAUMAS Elettronica srl • Phone: (+39) 0521 683124 • Fax (+39) 0521 681091 ISO 9001
UFFICIO VENDITE ITALIA: [email protected] • EXPORT SALES DEPARTMENT: [email protected] ISO 14001 www.laumas.com
 TLB
WEIGHT TRANSMITTER

MAIN FUNCTIONS

 Connections to: SPACE SAVING COMPACT DESIGN

- PLC via analog output or fieldbus;
- PC/PLC via RS485 (up to 99 instruments with line repeaters, up
to 32 without line repeaters);
- remote display via RS485;
- up to 8 load cells in parallel by junction box.
 TCP/IP WEB APP: integrated software in combination with the
Ethernet TCP/IP version for remote supervision, management and
control of the instrument.
 Digital filter to reduce the effects of weight oscillation.
 Theoretical calibration (via keyboard) and real calibration (with
sample weights and the possibility of weight linearization up to
8 points).
 Tare weight zero setting.
 Automatic zero setting at power-on.
 Gross weight zero tracking.
 Semi-automatic tare (net/gross weight) and preset tare.
 Semi-automatic zero.
 Displaying of the maximum weight value reached (peak).
 Direct connection between RS485 and RS232 without converter.
 Hysteresis and setpoint value setting.
Approved versions for legal for trade use
 System parameters management protected by qualified access
via software (password), hardware or fieldbus.
 Weight subdivisions displaying (1/10 e).
 Two operation mode: single interval or multi-interval.
 Net weight zero tracking.
 Calibration.
Re v. 0. 0

The Company reser ves the right to make changes to the technical data, drawings and images without notice.

LAUMAS Elettronica srl • Phone: (+39) 0521 683124 • Fax (+39) 0521 681091 ISO 9001
UFFICIO VENDITE ITALIA: [email protected] • EXPORT SALES DEPARTMENT: [email protected] ISO 14001 www.laumas.com