®
DESMOPHEN 1990
General Properties and Applications DESMOPHEN 1990 is a trifunctional polyether polyol.
It can be used in conjunction with isocyanates for the production of
polyurethane products.
Sampling Moisture access should be prevented when taking product samples.
Specification
Property Value Unit of Method
measurement
Hydroxyl number 530 - 570 mg KOH/g PET-11-01
Viscosity at 25 °C 465 - 545 mPa·s PET-10-01
Water content ≤ 0.15 % PET-19-01
Other Data*
Property Value Unit of Method
measurement
Density at 25 °C approx. 1.11 g/cm³ DIN 51757
* These values provide general information and are not part of the product specification
Storage Storage in original sealed Covestro containers.
Recommended storage temperature: 10 – 35 °C
Protect from moisture, heat and foreign material.
Covestro represents that, for a period of 12 months following the day of
shipment as stated in the respective delivery documents, the product will meet
the values set forth in section "specification" above provided that the product is
stored in full compliance with the storage conditions and is otherwise handled
appropriately.
The lapse of this period does not necessarily mean that the product no
longer meets specifications. However, prior to using said product, Covestro
recommends to test such a product if it still meets the specifications. Covestro
does not make any representation regarding the product after the period and
Covestro shall not be responsible or liable in any way for the product failing to
meet specifications after the period.
page 1 of 2
Edition 2022-01-26
Replaces edition dated 2018-01-20 Product Datasheet
®
DESMOPHEN 1990
Labeling and REACH applications This product data sheet is only valid in conjunction with the latest edition of the
corresponding Safety Data Sheet. Any updating of safety-relevant information
– in accordance with statutory requirements – will only be reflected in the Safety
Data Sheet, copies of which will be revised and distributed. Information relating
to the current classification and labeling, applications and processing methods
and further data relevant to safety can be found in the currently valid Safety
Data Sheet.
The manner in which you use and the purpose to which you put and utilize our products, technical assistance and information (whether verbal,
written or by way of production evaluations), including any suggested formulations and recommendations, are beyond our control. Therefore, it is
imperative that you test our products, technical assistance, information and recommendations to determine to your own satisfaction whether our
products, technical assistance and information are suitable for your intended uses and applications. This application-specific analysis must at least
include testing to determine suitability from a technical as well as health, safety, and environmental standpoint. Such testing has not necessarily been
done by Covestro. Unless we otherwise agree in writing, all products are sold strictly pursuant to the terms of our standard conditions of sale which
are available upon request. All information and technical assistance is given without warranty or guarantee and is subject to change without notice.
It is expressly understood and agreed that you assume and hereby expressly release us from all liability, in tort, contract or otherwise, incurred in
connection with the use of our products, technical assistance, and information. Any statement or recommendation not contained herein is unauthorized
and shall not bind us. Nothing herein shall be construed as a recommendation to use any product in conflict with any claim of any patent relative to
any material or its use. No license is implied or in fact granted under the claims of any patent.
This product is not designated as „Medical Grade” (1) and therefore shall not be considered a candidate for the manufacture of a medical device or of
intermediate products for medical devices, which are intended under normal use to be brought into direct contact with the patient's body (e.g., skin, body
fluids or tissues, including indirect contact to blood)*. [This product is also not designated for Food Contact (2), including drinking water, or cosmetic
applications. If the intended use of the product is for the manufacture of a medical device or of intermediate products for medical devices, for Food
Contact products or cosmetic applications Covestro must be contacted in advance to provide its agreement to sell such product for such purpose.]
Nonetheless, any determination as to whether a product is appropriate for use in a medical device or intermediate products for medical devices, for Food
Contact products or cosmetic applications must be made solely by the purchaser of the product without relying upon any representations by Covestro.
1) Please see the "Guidance on Use of Covestro Products in a Medical Application" document.
2) As defined in Commission Regulation (EU) 1935/2004.
Editor: Business Unit Polyurethanes
Covestro AG
Kaiser-Wilhelm-Allee 60
51373 Leverkusen, Germany Contact :
www.covestro.com Business Unit Polyurethanes
e-mail: [email protected]
page 2 of 2
Edition 2022-01-26
Replaces edition dated 2018-01-20 Product Datasheet
