Type Approval Certificate: Twentsche Kabelfabriek BV
Type Approval Certificate: Twentsche Kabelfabriek BV
www.veristar.com
Requirements:
Bureau Veritas Rules for the Classification of Steel Ships.
IEC 60092-350 (2020), IEC 60092-354 (2020), IEC 60092-360 (2021)
IEC 60228 (2004)
IEC 60332-1-2 (2004), IEC 60332-3-22 Cat.A (2018)
IEC 60754-1/2 (2011)
IEC 61034-1/2 (2013)
This certificate is issued to attest that Bureau Veritas Marine & Offshore did undertake the relevant approval procedures for the product identified
above which was found to comply with the relevant requirements mentioned above.
This certificate remains valid until the date stated above, unless cancelled or revoked, provided the conditions indicated in the subsequent page(s) are complied
with and the product remains satisfactory in service. This certificate will not be valid if the applicant makes any changes or modifications to the approved product,
which have not been notified to, and agreed in writing with Bureau Veritas Marine & Offshore. Should the specified regulations or standards be amended during
the validity of this certificate, the product(s) is/are to be re-approved prior to it/they being placed on board vessels to which the amended regulations or standards
apply. This certificate is issued within the scope of the General Conditions of Bureau Veritas Marine & Offshore available on the internet site www.veristar.com.
Any Person not a party to the contract pursuant to which this document is delivered may not assert a claim against Bureau Veritas Marine & Offshore for any
liability arising out of errors or omissions which may be contained in said document, or for errors of judgement, fault or negligence committed by personnel of the
Society or of its Agents in establishment or issuance of this document, and in connection with any activities for which it may provide.
1.2 - Construction:
Copper conductor: Stranded flexible Class 2 or 5, Plain or Tinned Copper Wire.
Conductor semi-conducting screen: Cross-Linked PolyEthylene (XLPE) (Optional Tape)
Insulation: Cross-Linked PolyEthylene (XLPE)
Insulation semi-conducting screen: Cross-Linked PolyEthylene (XLPE)with:
Tape and braiding ( YOZmv type)
Tape and copper tape (YZOZmv type)
Earth screen construction: Plain or Tinned copper braid
Outer Sheath: Flame retardant halogen free polyolefin compound
3. TEST REPORTS:
BV Twentsche Kabelfabriek:
- Ref: 0408or.doc dated 09/01/2009.
- Ref: H00051, dated 30.Mar.2016.
- Ref: 3301840024 & 2847340011, dated 12.May.2016.
QED:
- Ref: 016-1033-2008-R1 Revision 008 dated 21 January 2009
KEMA:
- Ref: 09-1226 dated 5 March 2009
BRE Global:
- Ref: 250467-1/2 dated 2009
4. APPLICATION / LIMITATION:
4.1 - BUREAU VERITAS Rules for the Classification of Steel Ships.
4.2 - Approval valid for units having to comply with IMO Resolution A.1023(26) (The "MODU Code").
6. MARKING OF PRODUCT:
The cable shall be marked on the surface outer sheath, in a durable legible and visible manner, with the following information
through the length of cable:
1) - Voltage grade
2) - Cable symbol and temperature class
3) - Number of conductors and conductor size
4) - Applicable standard(s) to flame retardant
5) - Manufacturer's name or trade mark
6) - Year of manufacture
7. OTHERS:
7.1 - It is TWENTSCHE KABELFABRIEK BV's responsibility to inform shipbuilders or their sub-contractors of the proper
methods of fitting, use and general maintenance of the approved equipment and the conditions of this approval.
7.2 - This certificate supersedes the Type Approval Certificate No. 21627/B0 BV issued on 19 Jun 2016 by the Society.