Scribd
Upload
301 views

Conical Taper

The document discusses the conical taper symbol in geometric dimensioning and tolerancing (GD&T). The conical taper symbol indicates that a dimensioned value represents a standard taper ratio of the diameter change to length change. When using the symbol in a drawing, it is always placed with the vertical leg on the left. An example figure shows the conical taper symbol highlighting a tapered feature. The document concludes by offering GD&T training to help learn and apply symbols like conical taper.

Uploaded by

jan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
301 views

Conical Taper

The document discusses the conical taper symbol in geometric dimensioning and tolerancing (GD&T). The conical taper symbol indicates that a dimensioned value represents a standard taper ratio of the diameter change to length change. When using the symbol in a drawing, it is always placed with the vertical leg on the left. An example figure shows the conical taper symbol highlighting a tapered feature. The document concludes by offering GD&T training to help learn and apply symbols like conical taper.

Uploaded by

jan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

About Us Contact Us Course Login Industries

Training Free GD&T Symbols GET GD&T


Pricing TRAINING
Options Resources Guide

← Back to All Symbols

Conical Taper
by Crystal Bemis on February 6, 2023.

Symbol:

Definition:
The conical taper symbol is placed with a dimension value to indicate that the value is
controlled as a standard taper. The value listed with the symbol is the ratio of the diameter
change to length change, illustrated in Figure 1.
Figure 1: Conical Taper Value

Application:
When applying the conical taper symbol to a print, the symbol is always represented with the
vertical leg on the left, regardless of the actual direction of the taper shown on the drawing.
For standard taper series, basic dimensions are used. A conical taper is illustrated in Figure
2, with the conical taper symbol highlighted in green.
Figure 2: How to Indicate a Conical Taper

Overwhelmed by the Complexity of GD&T?


Learn GD&T at your own pace and apply it with confidence in the real world.

GET YOUR GD&T TRAINING

All Symbols

You might also like