PADILLA REVIEW

PADILLA REVIEW UNIT TEST

Subject Code: UT26

Theory Of Structures | Reinforced Concrete Design

PADILLA REVIEW
SITUATION 1: 9. What is the moment at B? a. 125.83 kN-m b. 166.67 kN-m
Using Three-Moment Equation. Given: a=2 a. 13.12 kN-m b. 11.11 kN-m
c. 158.33 kN-m d. 99.84 kN-m
m, b=4 m, and w=8 kN/m. Find the c. 12.13 kN-m d. 10.11 kN-m
PADILLA REVIEW10. What is the moment at C?
following: 20. What is the moment at C?
a. -48.33 kN-m b. -94.88 kN-m
a. -36 kN-m b. -72 kN-m c. -133.33 kN-m d. 0 kN-m
c. -108 kN-m d. -54 kN-m
SITUATION 6:

PADILLA REVIEW
SITUATION 4: A two span continuous reinforced
Use Moment Distribution Method for the concrete beam has a total length of 6m. It
1. What is the moment at B? beam below. Given: a=8 m, b=3 m, w=10 has a cross section of 300mm x 600mm

PADILLA REVIEW
a. -22.67 kN-m
c. -20.27 kN-m
b. -20.67 kN-m
d. -26.67 kN-m
kN/m, and P=50 kN. Determine the and is reinforced with 5 – 28mm Ø. The
beam supports a live load of 10kN/m.
Using steel cover of 75mm, fc’ = 28MPa, fs
2. What is the reaction at A? PADILLA REVIE
= 138MPa. Let fc = 0.45f’c.
21. Which of the following most nearly
a. 0.178 kN b. 0.187 kN
c. 0.171 kN d. 0.181 kN gives the location of the neutral axis from
the extreme compression fiber?
3. What is the reaction at B? a. 275.26 mm b. 222.77 mm

PADILLA REVIEW
a. 40.533 kN b. 43.333 kN c. 350.28 mm d. 173.90 mm

PADILLA RE
c. 39.667 kN following:
d. 42.667 kN
11. What is the FEMAB? 22. Determine the cracking moment of

VIEW
4. What is the reaction at C?
a. 8.146 kN b. 7.289 kN
a. -58.33 kN-m
c. -56.67 kN-m
b. -53.33 kN-m
d. -66.67 kN-m
inertia of the beam.
a. 3.36 x 109 mm4 b. 3.63 x 109 mm4
c. 5.152 kN d. 4.489 kN c. 6.36 x 109 mm4 d. 6.33 x 109 mm4

SITUATION 2:
PADILLAa. -58.8 kN-m REVIEW
12. What is the FEM ? BD
b. -49.5 kN-m 23. Determine the moment experienced
Using Three-Moment Equation, determine c. -55.5 kN-m d. -45.8 kN-m by the concrete.

PADILL
the moment in the support. Given: a=5 m, a. 159.11 kN-m b. 178.89 kN-m
13. What is the moment at A? c. 191.51 kN-m d. 189.78 kN-m
LA REVIEW
b=8 m, and w=14 kN/m.
a. -52.83 kN-m b. -52.68 kN-m

PADILLA REVIEW
c. -66.67 kN-m d. -56.28 kN-m 24. Determine the moment experienced
by the steel.
14. What is the moment at B? a. 159.11 kN-m b. 178.89 kN-m
a. 53.36 kN-m b. 56.33 kN-m c. 191.51 kN-m d. 189.78 kN-m

DILLA REVIEW
c. 54.63 kN-m d. 53.33 kN-m
25. Which of the following most nearly
5. What is the moment at B? 15. What is the moment at D? gives the moment capacity of the beam?
a. -37.15 kN-m b. -37.51 kN-m a. 49.93 kN-m b. 45.83 kN-m a. 159.11 kN-m b. 178.89 kN-m
c. -35.17 kN-m d. -31.57 kN-m c. 48.17 kN-m
PADILLA REVIEW
d. 46.67 kN-m c. 191.51 kN-m d. 189.78 kN-m

6. What is the moment at A? SITUATION 5: 26. Which of the following most nearly

PADILLA REVIEW
a. 7.33 kN-m b. 9.37 kN-m Use Moment Distribution Method for the gives the actual maximum moment of the
c. 3.79 kN-m d. 7.93 kN-m beam below. Given: a=10 m, b=2 m, c=4 beam?
m, P=20 kN, w1=25 kN/m, and w2=15k a. 16.01 kN-m b. 17.60 kN-m
7. What is the moment at C? c. 17.06 kN-m d. 16.10 kN-m
a. -60.54 kN-m b. -66.67 kN-m
c. -65.54 kN-m d. -64.05 kN-m PADILLA
SITUATION 7:
REVIEW
The cross-section of a 5-m simple beam is
an inverted Tee whose overall depth is
PADILLA REVIEW
SITUATION 3:
Using Three-Moment Equation, determine 600 mm, flange width of 750 mm, flange
N/m. Determine the following:
the moment in the support. Given: a=3 m, thickness of 200 mm and stem thickness
b=4 m, and w=12 kN/m. 16. What is FEMBA? of 250 mm. The section is made of sand
a. 158.33 kN-m b. 175 kN-m lightweight concrete and its ultimate
c. 0 kN-m d. 45 kN-m strength is defined to be 25 MPa. (Hint:
M cr c t
17. What is FEMCB?
A. -45 kN-m b. -175 kN-m
f r=
I PADILLA REV
; λ=0.85 ¿ .Using
the

PADILLA REVIEW
provision of 2015 NSCP:
c. -158.33 kN-m d. 0 kN-m
27. What is the maximum tensile stress
that the beam must experience?
8. What is the moment at A? 18. What is the moment at A?
a. 3.5 MPa b. 3.1 MPa
a. -5.06 kN-m b. -6.05 kN-m a. -204.25 kN-m b. -200 kN-m
c. 2.975 MPa d. 2.635 MPa
c. -5.05 kN-m d. -6.06 kN-m c. -206.67 kN-m d. -175 kN-m

19. What is the moment at B?

 PADILLA REVIEW
PADILLA REVIEW UNIT TEST
Subject Code: UT26

Theory Of Structures | Reinforced Concrete Design

PADILLA REVIEW
28. What is the cracking moment of the
beam?
a. 86.64 kN m b. 97.81 kN m
PADILLA REVIEW
c. 101.92 kN m d. 115.07 kN m

29. Determine the distributive live load

that the beam can carry at its midspan if it
carries a uniform dead load of 10 kN/m

PADILLA REVIEW
throughout its span.
a. 22.61 kN/m b. 26.82 kN/m
c. 17.72 kN/m d. 21.30 kN/m

PROBLEM 30: PADILLA REVIEW

What is the reduction factor for a
structural element experiencing a shear or
torsion?
PADILLA REVIE
a. 0.85 b.0.75
c. 0.65 d.0.90

--
PADILLA REVIEW
John 1:9-18 PADILLA RE
VIEW
How do you know who God is? Many people
today have arrived at their own perception of
Him, based on their personal ideas, reasoning,

PADILLA REVIEW
and desires. And some don’t want anyone
interfering with their preconceived notions of
God. This is nothing new—it was true in the
first century, just as it is today.
Jesus came to His own people, the Jews. But
PADILL
LA REVIEW
despite the testimony of John the Baptist—that
Christ was someone who surpassed him in rank

PADILLA REVIEW
and existed long before arriving on earth—they
didn’t want Him. Our Savior came to die in
order to save those who would believe in Him,
but He also came to explain the Father. Jesus
has both the knowledge and the authority to
DILLA REVIEW
do this, because He is God the Son and the only
one who has seen and fully knows God the
Father.
Therefore, if you want to know and understand
who God is, look at Jesus—not just in the
Gospel accounts of His earthly life but in the
PADILLA REVIEW
entire New Testament. This is the best way to
make sure that you are not deceived in your
PADILLA REVIEW
understanding of Him. Being confronted with
the truth now is much better than discovering
too late that you are following the wrong god.

PADILLA REVIEW
PADILLA REVIEW

PADILLA REV
PADILLA REVIEW