High-Speed Cutter N 78 PLUS

the programmable all-round model with 18.5'' color-

display and Touch-Screen operation for all standard
cutting work with graphical programming automation
for an extensive automated workflow.

Customer benefits
 Extended operating life of the knife as well as faster
knife change thanks to POLAR OptiKnife with knife
fine adjustment in the lower dead end
 High productivity by a great number of
programmable additional functions
 Shortest make ready times thanks to intuitive cutting program generation via block programming or
even Compucut
 Greatest cutting accuracy due to the POLAR-Positioning-System DPS with a mechanical positioning
accuracy of 1/100 mm
 Highly reliable in daily use and long lifespan as a result of the stability of the one-piece machine
frame, knife drive with worm gear drive and compact closed hydraulic system

Description High-Speed Cutter N 78

The High-Speed Cutter POLAR N 78 is mainly used in the half-size range. Formats up to a diagonal of 780 mm
can be easily handled and turned in the high-speed cutter. Cutting material with larger formats can only be
turned on the front table.
The High-Speed Cutter has extensive features in the standard equipment already which can increase the
productivity up to 20%.
The high-speed cutter can be upgraded with peripheral equipment (lift, jogger) to a cutting system.

Technical data
Cutting width 780 mm | 30.71 in
Feeding depth 780 mm | 30.71 in
Loading height max. 120 mm | 4.72 in
Safety clamp pressure 30 daN | 66 lbs
Clamp pressure, min 150 daN | 331 lbs
Clamp pressure, max 3,000 daN | 6,614 lbs
Backgauge speed on return way (0 - ...) 300 mm/sec | 11.81 in./sec
Knife speed 45 cycles/min
Smallest cut, automatically, without false plate 20 mm | 0.79 in
Smallest cut, automatically, with false plate 70 mm | 2.76 in
Further technical data are available for download on our website.

POLAR-Mohr Maschinenvertriebsgesellschaft GmbH & Co. KG | Hattersheimer Str. 25 | D-65719 Hofheim | phone: +49 61 92 – 20 4.0 | www.polar-mohr.com
Status: 02.2015 | Subject to technical alterations.
 High-Speed Cutter Options
Ergonomics
Productivity

Retrofitable
Option Customer benefit available for
Quality

N PLUS N PRO HD N AT HD
x Autotrim Up to 40% greater productivity by automatic waste removal — ○ 115 - 176 —
● 115 - 176
x x Autoturn PACE Up to 20% greater productivity by automatic turning of the — ○ 137 - 176 ○ 137 - 176 —
ream on the rear table
x Optimized Cutting Cycle Up to 10% greater productivity when cutting equal sizes in a — ○ 115 - 176 ○ 115 - 176 —
sequence
x Progressive central lubrication machine can be greased easily via one greasing point on ○ 115 - 155 ○ 115 - 155 ○ 115 - 155 —
front side ● 176 ● 176 ● 176
x x Process visualisation Reduced risk of mistakes by means of graphical operator ○ 78 - 176 a
guidance ● 78 - 176 ● 115 - 176
x Carbide tipped knives instead of HSS quality Up to 10 times longer knife life by means of harder knife ○ 78 - 176 ○ 78 - 176 ○ 115 - 176 a
quality
x Adjustable knife speed 100-50% The knife speed is easily adjusted to different materials, for ○ 92 - 137 ○ 92 - 137 ○ 115 - 137 —
example plastic panels
x x x  Downholder in front of knife Prevents mixing and shingling of multiple ups when cutting — ○ 92 - 176 ○ 115 - 176 —

x x Programmable pressure regulation Accurate clamp pressure can be progammed to each single ○ 92 - 137 ○ 92 - 137 ○ 115 - 137 —
cut position ► longer knife life ● 155 - 176 ● 155 - 176 ● 155 - 176
x x x  Automatic pressure regulation Sensors in machine table ensure ideal clamp pressure — ○ 115 - 176 ○ 115 - 176 —
► higher cutting accuracy, longer knife life
x False plate 40 mm (cutting width 50 mm) Small formats (e.g. business cards) can be cut without loss ○ 78 - 137 ○ 78 - 137 ○ 115 - 137 a
of quality
x False plate 60 mm (cutting width 70 mm) Small formats can be cut without loss of quality ○ 155 - 176 ○ 155 - 176 ○ 155 - 176 a

x x  OptiClamp for optimisation the cutting of challenging cutting material, — ○ 115 - 137 ○ 115 - 137 —
e.g. UV-coated material ● 155 - 176 ● 155 - 176
x x  TwinClamp For cutting of material with height differences, e.g. banknotes — ○ 115 - 137 ○ 115 - 137 —
► Up to 100% greater productivity
 USP - exclusively by POLAR ○ optional | ● standard | — not available

Status: 02.2015 | Subject to technical alterations. www.polar-mohr.com

 High-Speed Cutter Options
Ergonomics
Productivity

Retrofitable
Option Customer benefit available for
Quality

N PLUS N PRO HD N AT HD
x Swivel backgauge Simple correction for squareness by motor driven backgauge — ○ 92 - 176 ○ 115 - 176 —
adjustment
x Tilting backgauge Simple correction of over- and undercut by motor driven — ○ 115 - 176 ○ 115 - 176 —
backgauge adjustment
x x  Downholder at backgauge Holds down curly sheets for better aligning at backgauge — ○ 115 - 176 ○ 115 - 176 —

x x  AntiStickKnife Knife with special coating prevents buildup of glue ○ 78 - 176 ○ 78 - 176 ○ 115 - 176 a
► Up to 30% greater productivity
x x  AirKnife Prevents static loaded material or plastic sheets from sticking — — ○ 115 - 155 —
to the knife
x x  Separate air control for front table Eases the unloading of cut material while material on the rear ○ 115 - 137 ○ 115 - 137 a
table is fixed ● 155 - 176 ● 155 - 176 ● 115 - 176
x  ErgoFrontTable Machine front table is extended by 500 mm by two tiltable air ○ 155 - 176 ○ 155 - 176 ○ 155 - 176 a
tables ► Eases loading / unloading
x Firmly mounted lift Lift directly mounted to the frame — ○ 115 - 155 ○ 115 - 155 a
► space saving alternative compared to free-standing lift
x x Rear table guard movable Enables easy access to the knife from rear, e.g. for cleaning ○ 78 - 137 ○ 78 - 137 ○ 115 - 137 a
when cutting post-it's ● 155 - 176 ● 155 - 176 ● 155 - 176
x x Compucut® Transfer of prepress-data for external cutting program ○ 78 - 176 ○ 78 - 176 ○ 115 - 176 a
generation ► reduces make-ready times down to zero
x x  Barcode Enables automatic loading of the appropriate cutting program ○ 78 - 176 ○ 78 - 176 ○ 115 - 176 a

x x  CutManager Workflow integration with interface to prepress and HD — ○ 78 - 176 ○ 115 - 176 a
Postpress-Manager for job data and production data
x x  Guillo-Crease Unique creasing system that transforms your cutter quickly ○ 78 - 176 ○ 78 - 176 ○ 115 - 176 a
and easily into a creasing machine
x x  knock up block "WiMotion" Eases the work on the cutter because the operator can ○ 78 - 176 ○ 78 - 176 ○ 115 - 176 a
activate certain functions directly via WiMotion.
 USP - exclusively by POLAR ○ optional | ● standard | — not available

Status: 02.2015 | Subject to technical alterations. www.polar-mohr.com

 High-Speed Cutter Generations

Machine functions EM/EMC1+2 EMC Mon E/ED X/XT N PRO HD

Real image preview
Job oriented cutting program management
Animated icons for easy explanation of functions
extended block program even for combination sheets
USB-port
Stand-By Function to save energy
Long lasting LED illuminants
P-Net capable
Barcode reader
OptiKnife - Knife fine adjustment from front
Touch Screen for ergonomic operation
Branch table
Options PDR, AT, Downholder in front of knife
Knife cycle speed 37 cycles/min 37 cycles/min 45 cycles/min 45 cycles/min 45 cycles/min
Light barrier 6-channels 6-channels 20-channels 20-channels 20-channels
Spindlenut with recirculating ball bearings
Catch device for clamp
Nickel refinded table standard
Remote prepared
Clear text informations partly
Two channel hydraulic
Backgauge pos. / no reference move
Knife change with automatic lower dead point
Knife lift
Label and distortion correction
Lay correction
Backgauge speed 15,6 cm/sec 15,6 cm/sec 30 cm/sec 30-60 cm/sec 30-60 cm/sec
Display segment monitor 10,4" TFT 15" TFT 21,5" TFT
Memory 99 198 198 1998 ~

not available available

POLAR-Mohr Maschinenvertriebsgesellschaft GmbH & Co. KG | Hattersheimer Str. 25 | D-65719 Hofheim | phone: +49 61 92 – 20 4.0 | www.polar-mohr.com
Status: 02.2015 | Subject to technical alterations.