Scribd
Upload
101 views

Baofeng BF v2 User Manual 20231019 en

Uploaded by

FRANCISCO ESTEBAN MONTECINOS VASQUEZ
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
101 views

Baofeng BF v2 User Manual 20231019 en

Uploaded by

FRANCISCO ESTEBAN MONTECINOS VASQUEZ
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
You are on page 1/ 2
Function Introduction ‘+ Frequency UHF: 400-470 MHZ (RXITX) + Upto 16 Channels ‘+ Chinese/English Language ‘+ 50 Groups CTCSS, 105 Groups of standard DCS ‘+ Time-out timer(TOT) ‘+ Battery saving function * Alarm function ‘+ USB rapid charge + Programmable by PC Battery Charging 4. Take out the charger, pug the AC (100-240V) S0/60Hz, then Green LED flashes: 2, Plug the battery ofthe radio with battery onthe charger; make sure the batlery is connected withthe charger. 3, The charging process intiates when the red LED lighs, the charging time based on the battery capacity. The green LED light indicating the battory is fully charged. 4. Use the USB cable to plug tothe radio, orange LED lights when charging, The lght off indicates that the fully charged. renee SWITCHING POWER ON/OFF ‘Turn the power switchesivolume contral clockwise, You wil hear a channel number, indicating the radio is ON, ADJUSTING THE VOLUME Hold MONI button down to listen to audio level while rotating the Power ‘siteh/Volume control Rotate clockwise to increase volume and counterclockwise to decrease volume. SELECTING THE CHANNEL ‘Turn the channel switch o select your desired channel, NO. 16 is ‘Scanning Channel Note: The radio outlook based on the real radio. ‘A. LED Indicator: Green LED flashes when receive the signal, Red LED flashes when transmission, 8, Channel knob: Rotate the knab to choose the channel (CH'-CH15), CH16is scan channel C. ONIOFF knob/Volume knob: Rata the knob clockwise to turn on the raclo, antclockis to tum of te radio. By rotating to control the volume. D. PTT switch: Press PTT and speak to the microphone to call iston When release . Monitor: When press Monitor key the squelch opened and the background noise comes out; the squelch clase when release the monitor key. USB Rapid charge plug, SSpeaker/Microphone rubber plug: Please cover when not use the speaker and microphone. H. insert loudspeaker. o> J. Microphone 1 PTTTRANSMIT ‘To transmit, press and hold [PTT] and speak into the microphone in your normal tane of voie. SQUELCH LEVEL “The purpose of Squeleh isto mute the speaker whan no signals are present (Squslch OFF). With the squelch level correctly set, you wil hear ‘sound only while actually receiving signals (Squelch ON). The squelch level can be adjusted via program software. ‘The frequency of squelch is 0 (on) -9 (deep), stops: 1. vox. ‘a. VOX funeton is effective when the function is turn on ». VOX gain level: When the sound level is higher than the set evel of VOX, VOX automaticaly transmit. The VOX gain level can adjust from + toGlevels ‘When a signal is received, VOX will not transmit evan ifthe sound level is higher than the set VOX gain level

You might also like