Saunders Industrial Diaphragm Valves

Saunders A Type Saunders KB Type

Diaphragm Valve Diaphragm Valve
Product Information Product Information
Weir type design available with a versatile and cost Straight through design with a full range of rubber
effective range of plastic and rubber linings* offering linings* to handle abrasives and slurries. Offers an
the optimum solution for customers needs in uninterrupted flow path critical for valve longevity.
chemically demanding applications.
Size Range Size Range
DN8 – DN350 (DN400, 450 & 500 available as DN15 – DN350
double weir options). Pressure Range
Pressure Range Up to 10 bar
Up to 16 bar
Temperature Range
Temperature Range
-30º C to +120º C
-30º C to +175º C
Body Body
Cast iron, SG iron, cast steel, stainless steel Cast iron, SG iron, cast steel and stainless steel.
and copper alloys. Linings
* Linings *
Various rubbers including natural, polychloroprene,
Various rubbers, polypropylene (PP), ethylene butyl and hard ebonite. Glass lining*.
tetrafluororethylene (ETFE ), perfluoroalkoxy (PFA),
polytetrafluoroethylene (PTFE) and glass*. Diaphragms
Diaphragms Various including ethylene propylene co-polymer
(EPM), fluoroelastomer, nitrile, polychloroprene
Various including PTFE rubber backed, EPM
(a copolymer of ethylene and propylene monomers) and isobutylene isoprene.
fluoroelastomer, nitrile, natural rubber, polychloroprene Face to Face Dimensions
and chlorosulphonated polyethylene.
EN 558-1 Series 7 (EN & BS10 Flange)
Face to Face Dimensions EN 558-1 Series 1 (EN Flange)
EN 558-1 Series 7 (EN & BS10 Flange) MSS SP 88 (ANSI Flange)
EN 558-1 Series 1 (EN Flange)
MSS SP 88 (ANSI Flange) End Connections
End Connections Flanged End Connections
BS10 Table D (also E)
Flanged End Connections
BS10 Table D (also E) EN 1092-1/EN 1092-2 PN16, PN10, PN6
EN 1092-1/EN 1092-2 PN16, PN10, PN6 ANSI 125/150
ANSI 125/150 APS 3.1.4 (MOD)
APS 3.1.4 (MOD) Screwed End Connections
Screwed End Connections BS21 Rp
BS21 Rp BS21 Rc
BS21 Rc API/NPT
API/NPT
Approvals
Approvals
BS EN ISO 9001, TUV AD – Merkblatt HPO,
BS EN ISO 9001, TUV AD – Merkblatt HPO,
Lloyds Register, Bureau Veritas, Det Norske Veritas,
Lloyds Register, Bureau Veritas, Det Norske Veritas,
American Bureau of Shipping, Water Research American Bureau of Shipping, Water Research
Council. Pressure Equipment Directive (97/23/EC). Council. Pressure Equipment Directive (97/23/EC).
Mode of Operation Mode of Operation
Handwheel and actuated. Refer to Saunders Linear Handwheel and actuated. Refer to the Saunders ES/
Actuation range on pages 8 & 9. EV Actuator on page 9.
Typical Applications Typical Applications
Used throughout the chemical processing Industry Used throughout the chemical processing Industry
particularly for water treatment, metal treatment
particularly for handling inert and corrosive abrasive
& processing, pulp and paper, chlor-alkali, effluent
treatment, potable water, toxic fluids and all chemicals media or slurries. Extensively used within the mining,
(within the temperature and pressure range). minerals processing & fertiliser production Industries.

4 * Please contact Crane Process Flow Technologies Ltd for our brochures or visit www.craneflow.com & www.saundersvalves.com
 Saunders Industrial Diaphragm Valves

Notes

Saunders WFB Type Valve

Product Information
Based on the weir design, the WFB valve offers
a long term service and trouble free operation
when demanded during critical periods to fight
and extinguish fires. Operates even after being
left idle for long periods of time.
Size Range
DN40 – DN65
Pressure Range
Up to 15 bar
Temperature Range
-30º C to +175º C
Body
* Gunmetal and SG iron
Note various models available*
Handwheel
Gunmetal and SG iron
Diaphragms
Specially designed grade 286 "Fire" diaphragm and
233 CV grade (for tank cleaning)
End Connections
(Inlet/Outlet Body Options)
Screwed
BS21 Rp
ANFT* 7.5 TPI
* American National Fire Thread, Male or Female
Flanged
BS10 Table D & E (Gunmetal and SG Iron)
BS 4504 PN16 DIN 86021 ND16 & ANSI B16.24
Class 150 (Gunmetal)
EN1092-2 PN16 & ANSI B16.42 Class 150 (SG Iron)
Approvals
BS EN ISO 9001, Det Norske Veritas, MSA,
Lloyd Register of Shipping, Bureau Veritas. Registro
Italian Naval (Rina) American Bureau of Shipping.
Mode of Operation
Handwheel operated
Typical Applications
“ We specified
Saunders WFB
65mm nominal bore
Seawater, waste effluent water and fire mains water.
Used extensively on cruise liners and car ferries.
fire-mains hydrant
valves for our ferries
and cruise liners.
Significant factors
behind this choice
are excellent
reliability and the
low maintenance
costs.
”
P&O Cruises
(UK) Ltd
* Please contact Crane Process Flow Technologies Ltd for our brochures or visit www.craneflow.com & www.saundersvalves.com 5
 Saunders Aseptic Diaphragm Valves

Standard 2 way AFP Diaphragm Standard Machined Block and

valve (forging or investment cast) forged body Zero Dead Leg Range
Product Information Product Information
Available in a complete range of body finishes Essential in the elimination of system dead leg, this
and end connections to match system design range of product eases installation and validation
requirements. Note – Saunders 2 way AFP forging concerns. All products either machined barstock or
range fully meets ASME BPE standards. forging and include Zero Dead Leg T pattern valves
(ZDT), Close Coupled Branch valves (CCBV),
Size Range Tank Bottom, Point of Use Options, and Multiport
DN8 – DN150 Diverter valves.
Pressure Range Size Range
Up to 16 bar DN8 – DN150
Temperature Range Pressure Range
-30º C to +175º C Up to 16 bar
Body Temperature Range
Stainless steel 316L/1.4435 -30º C to +175º C
* Special alloys available on request * Body
Surface Finish Stainless Steel 316L/1.4435
Complete range of mechanically polished and Special alloys available on request
electropolished options. These include Vacublast
(1.6 Ra µm), Satin (0.5 Ra µm) and Mirror (0.25 Ra µm). Surface Finish
Complete range of mechanically polished and
Diaphragms electropolished options. These include Vacublast
Full range of diaphragm selections engineered to meet (1.6 Ra µm), Satin (0.5 Ra µm) and Mirror (0.25 Ra µm).
the exacting demands of the biopharm industry. All
formulated in-house from FDA conforming materials Diaphragms
and tested and certified to USP Classes V & VI. Full range of diaphragm selections engineered to
meet the exacting demands of the biopharm industry.
Uniquely, Crane Process Flow Technologies Ltd All formulated In-house from FDA conforming materials
are able to offer batch traceability and certify that and tested and certified to USP Classes V & VI.
all diaphragm grades are ADCF* free.
End Connections
Full range of weld and mechanical end connections
”
Uniquely, Crane Process Flow Technologies Ltd
are able to offer full batch traceability and certify
that all diaphragm grades are ADCF free.
to meet International standards.
End Connections
Quality Statements and Approvals Full range of weld and mechanical end connections
“ Boehringer Ingelheim
have utilized the full
range of Saunders
BS EN ISO 9001, FDA, cGMP, USP & 3A to meet International standards.
Aseptic diaphragm Mode of Operation Quality Statements and Approvals
valves, actuators and Modular range of polymer and stainless steel manual BS EN ISO 9001, FDA, cGMP, USP & 3A
accessories for many
bonnet options. Refer to the Saunders EC & ECX
years. Particularly
Actuator range on page 8. Mode of Operation
impressive is the level of
technical advice, sales Modular range of polymer and stainless steel manual
Typical Applications bonnet options. Refer to the Saunders EC Actuator
and after sales support
which we have been Complete application coverage within the range on page 8.
provided with. It’s the biopharmaceutical environment including water
entire service package for injection (WFI) systems, process media and Typical Applications
in addition to the general Cleaning In Place (CIP) and Steam in Place Complete application coverage within the
performance of the (SIP) requirements. biopharmaceutical Market including water for injection
product range, which
system sampling/injection points, flow diversion
makes Saunders Aseptic * Animal Derivative Component Free requirements and product transfer.
diaphragm valves our
first choice.
”
Senior Project
and Qualification
Engineer
Boehringer
Ingelheim UK
6 * Please contact Crane Process Flow Technologies Ltd for our brochures or visit www.craneflow.com & www.saundersvalves.com
 Saunders Aseptic Diaphragm Valves

Customised Fabrication* Bio-Block Customised

Design Options
Including Tandem valves, Zero Dead Leg L Pattern Product Information
valves and manifold/cluster arrangements. In recognition of increasingly stringent and demanding
Product Information process needs, Crane Process Flow Technologies Ltd.
have developed a unique range of Bio-Block machined
Valve orientations are configured to minimise deadleg, valve design solutions.
reduce space envelope and facilitate ease of installation.
These innovative design solutions are developed utilising
Configuration of optimum process fabrication and advanced CAE facilities. These enable our design
supply of fully tested assembled units simplify engineers to convert a customer’s application requirement
installation and validation concerns. from concept to reality, quickly and cost effectively.
Size Range Advantages over traditional design include reduced
DN8 – DN150 wetted area/deadleg, no internal fabrication welds
and enhanced product integrity.
Pressure Range
Size Range
Up to 16 bar
DN8 – DN150
Temperature Range (For DN150 consult us for more information)
* -30º C to +175º C * Pressure Range
Body Up to 16 bar
Stainless Steel 316L/1.4435 Temperature Range
Special alloys available on request
-30º C to +175º C
Surface Finish Body
Complete range of mechanically polished and Stainless steel 316L/1.4435.
electropolished options. These include Vacublast Special alloys available on request
(1.6 Ra µm), Satin (0.5 Ra µm) and Mirror (0.25 Ra µm).
Surface Finishes
Diaphragms
Complete range of mechanically polished and
Full range of diaphragm selections engineered to meet electropolished options. These include Vacublast
the exacting demands of the biopharm industry. All (1.6 Ra µm), Satin (0.5 Ra µm) and Mirror (0.25 Ra µm).
formulated In-house from FDA conforming materials
and tested and certified to USP Classes V & VI. Diaphragms
Full range of diaphragm selections engineered to meet
Uniquely, Crane Process Flow Technologies Ltd the exacting demands of the biopharm industry. All
are able to offer full batch traceability and certify formulated in-house from FDA conforming materials
that all diaphragm grades are ADCF free. and tested and certified to USP Classes V & VI.
End Connections Uniquely, Crane Process Flow Technologies Ltd
Full range of weld and mechanical end connections are able to offer full batch traceability and certify that
to meet international standards. all diaphragm grades are ADCF free.
Quality Statements and Approvals “ We recently
placed an order End Connections
“ I've had over 30 years
of user experience within
the Pharmaceutical
BS EN ISO 9001, FDA, cGMP, USP & 3A
Mode of Operation
for a significant
quantity of
Saunders standard,
Full range of weld and mechanical end connections
to meet international standards.
Industry and have never
Modular range of polymer and stainless steel manual
fabricated and Quality Statements and Approvals
seen such a seamless custom Bio-Block
and painless ability of a bonnet options. Refer to the Saunders EC Actuator style valves with BS EN ISO 9001, FDA, cGMP, USP & 3A
company to meet our range on page 8. actuators and
needs. Saunders put accessories.
Mode of Operation
together a project team Typical Applications Product was Modular range of polymer and stainless steel manual
and they all communi- Complete application coverage including water delivered on time, bonnet options. Refer to the Saunders EC Actuator
cated quickly and systems, ClP manifolds and condensate drains. and in some cases range on page 8.
accurately through ahead of schedule.
Sales, Engineering and * Typical products utilised in manifold arrangements ABEC will continue Typical Applications
Manufacturing to keep us include standard AFP forgings, Close coupled branch to specify Saunders Complete application coverage within the
and our piping contractor valves for our
Valves (CCBV), Zero dead leg Valves "L" pattern ( ZDL), biopharmaceutical environment including water
informed at all stages. equipment.
Process
Engineer, Abbott
” Zero dead leg "T" pattern ( ZDT) and Diverter options.
”
Senior Project
Manager,
for injection systems, sterile barrier requirements
and chromatography.
Laboratories, USA ABEC Inc
* Please contact Crane Process Flow Technologies Ltd for our brochures or visit www.craneflow.com & www.saundersvalves.com 7
 Saunders Linear Actuators and Accessories

Saunders EC Actuator Saunders ECX Actuator

Product Information Product Information

Compact, lightweight & robust piston operated Providing an extension to the Saunders EC range,
linear actuator. the ECX gives excellent chemical resistance whilst
still providing a compact solution.
Size Range
DN8 – DN50 Size Range
DN 65 – DN150
Temperature Range
-10º C to +150º C (external environment) Temperature Range
-20º C to +85º C (external environment)
Body
Injection moulded PES (polyethersulphone) Body
with high chemical resistance. Silicon Aluminium
Options Options
Fail safe Close (2, 4 & 6 bar spring options); Available as failsafe spring close*, failsafe spring open
Fail Safe Open and Double Acting Versions. and double acting.
* Additional Information * *Various spring packs available.
Stainless steel version also available for Suitability
biopharmaceutical applications.
Saunders weir type A, and the Saunders aseptic
Accessories diaphragm valves range.
Switchboxes, solenoid valve and positioners available. Accessories
Approvals Solenoid valve, switch box, positioners & air filter.
BS EN ISO 9001, Conforms to FDA requirements. Typical Applications
Typical Applications Well suited to the chemical and
Very successfully utilised in the biopharmaceutical biopharmaceutical Industry.
market including those duties including sterilisation by
steam, dry heat or chemical methods. Used where
space is a premium.

8 * Please contact Crane Process Flow Technologies Ltd for our brochures or visit www.craneflow.com & www.saundersvalves.com
 Saunders Linear Actuators and Accessories

Saunders ES & EV Actuator Actuator Accessories

Product Information Product Type: Module Switchbox

Suitable for the full range of Saunders diaphragm Product Information
valves, the ES and EV linear actuator range offers a Highly modular switchbox option is available for
robust and durable solution. Both renowned for their the EC (and Stainless Steel Compact SSC) and
reliability, longevity and low cost of ownership. ECX actuator ranges.
Size Range Offers a wide range of V3 mechanical and proximity
switches (I/S and EEXD options) with space for up to
DN 15 – DN250
4 switches, integral solenoid valve and AS-i interface.
Temperature Range Diaphragm valve suitability
-20º C to +85º C (external environment) Saunders weir type A, and the Saunders aseptic
Body diaphragm valves range.
Silicon Aluminium Actuator & Size Range
EC: DN8-50
Options ECX: DN65-150
Available as failsafe spring close, failsafe spring Temperature Range
* open and double acting. * -25º C to +85º C
Approvals Enclosure Rating
BS EN ISO 9001 IP67 (NEMA 6)
Suitability
Product Type: Positioner
Saunders weir type A, Saunders straight through
type KB and the Saunders aseptic diaphragm Product Information
valves range. Provides precise control of the flow through the valve.
This long life corrosion resistant range suits a wide
Accessories variety of applications with reliability and accuracy.
Solenoid valve, switch box, positioners, air filter Available as pneumatic electro-pneumatic intrinsically
and handwheel (EV – handwheel not available). safe and explosion proof, together with a variety of
feedback options. A digital option is also available.
Typical Applications
Diaphragm Valve Suitability
Extensively used with Saunders weir type A
diaphragm valves and straight through type KB Saunders weir type A, Saunders straight through type
diaphragm valve. Applications include chemical KB and the Saunders aseptic diaphragm valves range.
processing, minerals and metal processing, pulp Actuator and Size Range
and paper & fertiliser production. Saunders Actuator type ES size DN15-250
Saunders Actuator type EV size DN15-150

Product Type: 007 Switchbox

Product Information
Highly modular switchbox option is available
for the ES and EV actuator range.
Offers a wide range of V3 mechanical and proximity
switches (I/S and EEXD options) with space for up to
4 switches, integral solenoid valve and AS-i interface.
Diaphragm Valve Suitability
Saunders weir type A, Saunders straight through type
KB and the Saunders aseptic diaphragm valves range.
Actuator and Size Range
Saunders Actuator type ES size DN15-250
Saunders Actuator type EV size DN15-150
Enclosure Rating
IP67 (NEMA 6)

* Please contact Crane Process Flow Technologies Ltd for our brochures or visit www.craneflow.com & www.saundersvalves.com 9
 CENTERLINE and FLOWSEAL Butterfly Valves

CENTERLINE Butterfly Valve CENTERLINE Butterfly Valve

Series 200 Series VIA/RS
Product Information Product Information
Concentric design butterfly valve with resilient seat. Concentric design butterfly valve with resilient seat.
Integral seat support design. Integral seat support design.
Size Range Size Range
DN50 – DN1200 (2"-48") DN40 – DN1200 (1.5"-48")
Pressure Rating Pressure Rating
PN10 &16, Class 125 & 150. Operating Pressure PN 6, 10 & 16
up to 16 bar ANSI Class 125 & 150.
Operating pressure up to 16 bar
Temperature Range
-20º C to +120º C Temperature Range
-20º C to + 150º C
Body
Cast iron, ductile iron Body
Cast iron, ductile iron, carbon steel.
Body Options
* * Body Options
Wafer and lug body
Wafer, lug and double flange body
Linings (Flange DN700 (28") and above only)
EPDM, BUNA – N (nitrile), neoprene, EPDM food
grade, hypalon, flouroelastomer, high temperature Linings
flouroelastomer, PTFE over BUNA – N (nitrile) EPDM, BUNA-N (NBR), EPDM – H, fluoroelastomer,
hypalon, neoprene.
Disc
Aluminium bronze, stainless steel, ductile Iron, ductile Disc
iron (nickel plated), monel. Stainless steel, hastelloy, duplex, high density
polyethylene, aluminium bronze, ductile iron nickel
End Connections plated, rilsan (DN200 (8") and above).
Lugged DN50 – DN750 (2"–30"), Flanged DN900 (36")
and above to PN 10, 16, ANSI Class 150. End Connections
Flanged to PN 6, 10 & 16, ANSI Class 125 & 150.
Face to Face Dimensions
In accordance with EN558 – 1/EN558 – 2 Series 20 Face to Face Dimensions
In accordance with EN558 – 1/EN558 – 2 Series 20
Approvals
BS EN ISO 9001 Approvals
ISO 9001, leak rate DIN 3230 Part 3 rate 1, /BS6755
Mode of Operation part 1 rate A. Bubble tight shut-off ANSI Class VI.
Lever, gear and actuated.
Refer to the REVO Actuator range on page 14. Mode of Operation
Lever, gear and actuated.
Typical Applications Refer to the REVO Actuator range on page 14.
Utilised for cooling, waste, sea and hot water.
Also compressed air. Typical Applications
Sugar processing, flue gas desulphurisation,
hot and drinking water, paper pulp processing,
gas generation and distribution.

10 * Please contact Crane Process Flow Technologies Ltd for our brochures or visit www.craneflow.com & www.saundersvalves.com
 CENTERLINE and FLOWSEAL Butterfly Valves

FLOWSEAL High Performance FLOWSEAL Triple Offset

Butterfly Valve Series HP Butterfly Valves Series VIA/MS
Product Information Product Information
Bi-directional double eccentric design with patented Bi-directional triple eccentric metal seated design.
soft seat. Gas Tight.
Three variants available – soft seated, metal seated
and "Fireflow" seated. Size Range
DN80-600 (3"-24")
Size Range
DN50 – DN1200 (2"-48") Pressure Rating
PN 10, 16, 25, 40
Pressure Rating ANSI Class 150, 300
PN 16, 25, 40
ANSI Class 150, 300 & 600 Operating Pressure
Up to 40 bar
Temperature Range
-70º C to +250º C Temperature Range
-70º C to +480º C (metal seat) -196º C to +550º C
(subject to materials chosen)
Body
* * Body
Carbon steel, stainless steel*.
Carbon steel, stainless steel*.
Body Options
Wafer and lug body Body Options
Double flange and lug body
Seat
Tetrafluoroethlylene (TFE), reinforced TFE (RTFE) Seat
& metal (fire flow design). Stainless steel, stellite.
Disc Disc
Stainless steel, nickel-plated stainless steel, Carbon steel, stainless steel.
aluminium bronze*
Sealing
Face to Face Dimensions Stainless steel/graphite laminate
In accordance with API 609-Table 2, EN 558-1,
Series 25** Face to Face Dimensions
In accordance with EN558-1, Series 13 & 16,
Approvals & Standards API 609-Table 2, ISO 5752-Table 4**
BS EN ISO 9001, BS6755 Part 1 leak rate A, ANSI/
FCI 70-2 class VI, API 607 4th edition (soft seat and Approvals
fireflow) BS EN ISO 9001, BS 6755 Part 1 leak rate A,
Metal seat ANSI FCI 70-2 Class IV shutoff ANSI/FCI 70-2 class VI, API 607 4th edition

“ We recently supplied
two 16" Flowseal Butterfly
valves to a key Steel
Mode of Operation
Gear and actuated.
Mode of Operation
Gear and actuated.
manufacturer in the UK. Refer to the REVO Actuator range on page 14.
Refer to the REVO Actuator range on page 14.
The valves are required
to facilitate emergency Typical Applications Typical Applications
shut down even in the
event of a critical failure. Service duties up to 200º C, air and gas systems, Superheated steam, hot water, petrochemicals,
We offered Flowseal steam up to 5 bar and processes where elastomers hot gas applications, liquid petroleum gas systems
Butterfly valves for several are insufficient & cryogenic applications. Used within the power
reasons, but particularly & steel industry.
because both weight * Note other materials available on request
and space were at a * Note other materials available on request
premium. Lead-time
** On request
was also critical and
** On request
Crane Process Flow
Technologies Ltd was
able to deliver within a
very short lead-time.
Managing Director
UK Process
”
Valves Ltd.
* Please contact Crane Process Flow Technologies Ltd for our brochures or visit www.craneflow.com & www.saundersvalves.com 11
 Noz-chek, Duo-chek II, SINGLE-CHEK I and Saunders Check Valves

Saunders NX Non Return Valve SINGLE-CHEK I Series VIA/CV

Product Information Product Information

Simple non return flap design for low pressures One-piece, self-centering disc design.
and vacuum duties. Soft and metal seated versions available.
Size Range Size Range
DN25 – DN150 DN50 – DN500
Pressure Range Pressure Range
Up to 7 bar, suitable for vacuum duties. Operating pressure up to 40 bar
Requires 0.3 bar back pressure.
Temperature Range
Temperature Range -10º C to +300° C
-10º C to +150º C
Body
Body Cast iron, cast steel and stainless steel.
Cast iron, SG iron.
Seat
Linings
* * Nickel plated steel, stainless steel.
Hard rubber
Disc Material
Disc Material Cast steel, stainless steel.
Rubber (metal reinforced)
Sealing
End Connections EPDM, butyl, PTFE, fluoroelastomer, metal.
Flanged End Connections
BS10 Table D (also E & F) Flange ratings
EN 1092-2 PN16, PN10, PN6 PN10, 16, 25, 40
ANSI 125/150 ANSI Class 150
Approvals Approvals
BS EN ISO 9001 BS EN ISO 9001
Typical Applications Typical Applications
Used throughout the chemical processing Industry Power, water and waste treatment plants. Also
particuarly for water treatment, power generation compressed air pipe systems, crude oil application
and water and waste treatment plants. and refinery systems.

12 * Please contact Crane Process Flow Technologies Ltd for our brochures or visit www.craneflow.com & www.saundersvalves.com
 Noz-chek, Duo-chek II, SINGLE-CHEK I and Saunders Check Valves

Duo-Chek II High Performance Noz-Chek High Performance

Check Valve Non-Slam Check Valve
Product Information Product Information
Dual Plate "Mission" design check valve. Available Nozzle type check valve specifically designed for
in a wide range of sizes, pressure classes and critical applications including fast reversing systems
materials to meet the most demanding of applications. where back flow is a concern. Minimises water
hammer, chatter and pressure drop.
Size Range
DN50 – DN1800 Size Range
DN50 – DN1500
Pressure Classes
ANSI 125-4500 Pressure Ratings
API 6A & 6D ANSI 150-4500
DIN, JIS, BS, AS and ISO standards also available. API 6D
API 6A
Temperature Range
-40° C to +200° C for rubber seated and –200° C Temperature Range
to +523° C for metal seated -40° C to +200° C for rubber seated and –200° C
to +523° C for metal seated
Body
* * Body
SG iron, WCB/LCC cast steel, 316 stainless steel.
All alloys. Ductile iron, WCB/LCC carbon steels, 316 stainless
steel, duplex stainless steels and all alloys.
Seat
EPDM, nitrile, neoprene, viton, fluoroelastomer. Seats
Metal seats also available. EPDM, nitrile, neoprene & fluoroelastomer.
Metal seats also available.
End Connections
Raised face, plain face, ring joint, weld end End Connections
and hub end. Flanged (raised face/plain face/ring joint)
Weld end and hub end.
Body Styles
Wafer, lug, double flanged and extended body Body Styles
styles. All the above valve styles are also available Standard pattern or short pattern
in retainerless design.
Approvals & Standards
Approvals & Standards API 594, API 598, ANSI B16.34, API 6D, API 6A,
API 594, API 598, ANSI B16.34, API 6D, API 6A, BS EN ISO 9001, Stoomwezen & TUV.
BS EN ISO 9001, Stoomwezen & TUV.
Typical Applications
Typical Applications Typically utilised for gas transmission, power
Typically used for liquid and gas fluid applications generation, petro-chemical/chemical processing,
within petroleum refining, petrochemicals processing, hydrocarbon processing and water transmission.
chemical processing, oil and gas production, pulp
and paper, power generation, steel/primary metal
processing, marine water and wastewater. * For further information, enquiries, technical support
or order placement please contact
Crane Stockham Valve Ltd, 6 Alexander Road,
* For further information, enquiries, technical support Cregagh, Belfast, BT6 9HJ.
or order placement please contact Telephone 02890 704222
Crane Stockham Valve Ltd, 6 Alexander Road, Telefax 02890 401582
Cregagh, Belfast, BT6 9HJ. www.cranestockham.co.uk
Telephone 02890 704222
Telefax 02890 401582
www.cranestockham.co.uk

13
 Notes

REVO Pneumatic Quarter Turn

Actuator Series R
Product Information
The range includes a rack and pinion quarter turn
actuator and scotch yoke design.
Torque Ranges
6 – 10,000 Nm (rack and pinion)
Up to 500,000 Nm (scotch yoke)
Applications
Three piece ball, other ball, butterfly and plug
valves DN8 mm (1/4") and above.
Options
Single acting and double acting
Temperature Range
-30º C to +80º C (standard)
* Operating Air Pressure
Max 10 bar
Housing material
Aluminium, anodised.
Shaft
Pressure balanced anti blow out shaft and bearings
Rotation
Clockwise (standard)
Accessories
Namur mounted limit switches, solenoid valves and
positioners all available.
Approvals
BS EN ISO 9001, Connecting flange of actuator acc.
to ISO 5211, draft February 1991.
Actuator connection with square acc to EIN 3337.
Mounting
To ISO 5211
Applications
Utilised with the CENTERLINE and FLOWSEAL range
of butterfly valves in the petrochemical, sugar, pulp
and paper, water treatment, steel and chemical
industry. Also food and beverage Industry.

14 * Please contact Crane Process Flow Technologies Ltd for our brochures or visit www.craneflow.com & www.saundersvalves.com
 Saunders Ball Valves

Notes

Saunders M Type Ball Valve

Product Information
Full bore 2 way ball valve, 3-piece design.
Center valve body can also be utilised with customer
bespoke flanges.
Size Range
DN15 – DN100
Pressure Rating
PN16, 10
Temperature Range
-30º C to 220º C
Body Housing
Cast iron, stainless steel.
Ball
*
Nylon coated, stainless steel & cast iron
Seats & Seals
Nitrile & PTFE available
Face to Face Dimensions
EN558-1 Series 1 and Series 7
End Connections
Flanged
BS10 Table D, E & F
EN1092-1/EN1092-2 PN16,10
ANSI Class 125/150
Female Screwed
BS21Rp
Approvals
BS EN ISO 9001
Ancillaries
Lever operated and actuated version available.
Refer to the REVO Actuator range on page 14.
Typical Applications
Well suited for gases, liquids, powders and viscous
media within the processing Industry.
Used extensively on road and railway tankers.

* Please contact Crane Process Flow Technologies Ltd for our brochures or visit www.craneflow.com & www.saundersvalves.com 15
 CRANE Cast Steel Valves

Cast Steel Gate Valve Cast Steel Globe Valve

Product Information Product Information

Crane cast steel gate valves offer the ultimate in Crane globe valves are highly efficient for services
dependable service wherever minimum pressure requiring frequent operation and throttling when
drop is important. pressure drop across the valve is about 20% of
Gate valve castings are manufactured in Carbon inlet pressure.
Steel to ASTM A216 grade WCB. Disc faces have a Globe valve castings are manufactured in Carbon
13% chrome overlay, seat rings are hardfaced (stellite) Steel to ASTM A216 grade WCB. Disc faces have a
and are welded in the valve body. Gate valves feature 13% chrome overlay, seat rings are hardfaced (stellite)
flexible wedge discs. All valves are 100% pressure and are welded in the valve body. All valves are 100%
tested according to API 598 requirements and are pressure tested according to API 598 requirements
provided with a test certificate. and are provided with a test certificate.
Size Range Size Range
2" – 24", DN 50 – DN 600 2" – 12", DN 50 – DN 300
Pressure/Temperature Ratings Pressure/Temperature Ratings
ANSI Class 150 or Class 300. ANSI Class 150 or Class 300.
* *
Body Body
Carbon Steel A216 WCB Carbon Steel A216 WCB
Features Features
Flexible Wedge Welded in seat ring to eliminate leak path.
Compensates for deformation of body due to pipe Fugitive emissions less than 100ppm with
stresses. Will not stick when the valve is closed standard requirements.
hot and allowed to cool. End Connections
Welded-in Seat Ring Flanged ANSI Class 150 or 300 to ANSI B16.5.
Seat ring is seal welded to eliminate leak path. Approvals
Testing and acceptance Steel Valves: ANSI B16.34
To API 598 and API RP591 Face to Face/End to End: ANSI B16.10/EN 558-2
Flange dimensions: ANSI B16.5
Fugitive Emissions Testing: API 598
Less than 100ppm with standard requirements. Acceptance: API RP591

End Connections Typical Applications

Flanged ANSI Class 150 or 300 to B16.5. These are standard specification cast steel
valves that are suitable for most general industrial
Approvals applications where corrosion and oxidation are
Steel Valves – ANSI B16.34 not factors.
Face to Face/End to End – ANSI B16.10/EN 558-2
Flange Dimensions – ANSI B16.5
Basic Design – API 600
* For further information, enquiries, technical support
or order placement please contact: Crane Fluid Systems,
Testing – API 598 Nacton Road, Ipswich, Suffolk, IP3 9QH.
Acceptance – API RP591 Telephone 01473 277400 Fax 01473 277411
Typical Applications Email [email protected]
www.cranefs.com
These are standard specification cast steel valves that
are suitable for most general industrial applications
where corrosion and oxidation are not factors.

* For further information, enquiries, technical support

or order placement please contact: Crane Fluid Systems,
Nacton Road, Ipswich, Suffolk, IP3 9QH.
Telephone 01473 277400 Fax 01473 277411
Email [email protected]
www.cranefs.com

18
 CRANE Cast Steel Valves

Notes

Cast Steel Swing Check Valve

Product Information
Check valves are automatically actuated. They are
opened and sustained in the open position by the
force of velocity pressure, and closed by the force
of gravity. Seating load and resultant tightness is
dependent upon back pressure.
Check valve castings are manufactured in Carbon
Steel to ASTM A216 grade WCB. Disc faces have a
13% chrome overlay, seat rings are hardfaced (stellite)
and are welded in the valve body. All valves are 100%
pressure tested according to API 598 requirements
and are provided with a test certificate.
Size Range
2" – 24", DN 50 – DN 600
Pressure/Temperature Ratings
* ANSI Class 150 or Class 300.
Body
Carbon Steel A216 WCB
Features
Welded in seat ring to eliminate leak path.
End Connections
Flanged ANSI Class 150 or 300 to ANSI B16.5.
Approvals
Steel valves: ANSI B16.34
Face to face/end to end: ANSI B16.10/EN 558-2
Flange dimensions: ANSI B16.5
Testing API 598
Acceptance API RP591
Typical Applications
These are standard specification cast steel
valves that are suitable for most general industrial
applications where corrosion and oxidation are
not factors.

* For further information, enquiries, technical support

or order placement please contact: Crane Fluid Systems,
Nacton Road, Ipswich, Suffolk, IP3 9QH.
Telephone 01473 277400 Fax 01473 277411
Email [email protected]
www.cranefs.com

19