Time 3 Hours] [=e fefiecuve piles" S025; exAMINATION 1B. E/B.Tech. (4 YDC) ME 10049/10149: Engineering Graphics 1061, [Max. Marks:70] All questions are compulsory . Use first angle projection method unless otherwise stated. Assume suitable dimensions if necessary. Qn Q2 Q3 @) () © (@) (>) () Marks CO BL PL The distance between Coimbatore and Madurai is 200 km and its (7) equivalent distance on map measures 10 cm. Draw the diagonal scale and indicate 223 km and 135 km on the scale. Draw an involute of a pentagon having each side of 30 mm length. (7) Draw a normal and tangent to this curve at a point P situated at a distance 160 mm from the endpoint of the curve. OR A circle of 50 mm diameter rolls on inner side of the circumference (7) of another circle of 175 mm, Trace the locus of a point on the circumference of the rolling circle for one complete revolution. Name the curve traced. ‘The top view of a 75 mm long line CD measures 50 mm. Its one (7) end A is 50 mm in front of V.P. and 15 mm below ELP. D is 15 mm in front of V.P. Draw the front view of CD and determine its inclinations with the H.P. and the V.P. Show its traces also. and The top view of a square lamina of sides 60 mm is a rectangle of (7) sides’60 mm x 20 mm. with the longer side of the rectangle being parallel to the XY line in both, the front view and the top view of. the lamina, Draw its projections. OR A thin circular plate of 50 mm diameter is resting on a point A of (14) its rim with the surface of the plate inclined at 45° to the H.P. and the diameter line through A inclined at 30° to the V.P. Draw the projections of the plate, A cylinder with 50 mm diameter of its base and axis 70 mm long (14) has its.axis inclined at 30°to the V.P. and the front view of the axis is inclined at 30° to the line XY. Draw the projections of the cylinder. OR A hexagonal pyramid with 25 mm edges of base and axis 50 mm (14) long, is resting in H.P. on one of its triangular faces with its axis, parallel to the V.P. It is cut by a section plane perpendicular to the HLP,, inclined at 30°to the V.P. and passing through a point P on 1 2 10.1.2Q4 @ (b) (e) the axis 20 mm from the base. Draw the top view, sectional front view and true shape of the section. Draw an isometric scale for a distance of 70 mm. having 7 equal (4) divisions, When is this type of scale used ? The projections of a solid composed of a truncated half-cylinder (10) 4 and a cut half-prism are given in figure -1. Draw the development of its lateral surface. Radius of cylindrical portion 25 mm. OR Draw the isometric view of the solid whose orthographic (10) projections are given in figure-2 4 Draw the (a) Front view (b) Top view and (c) Left hand side view (+4 § of the object shown in figure-3, 4) Figure-2 a 3 104d to. 10.42856 APRIL 2022 EXAMINATION IB. Tech. (4 YDC) MELO0149: Engineering Graphics [Time 3 Hours) (ax, Mars:70) All questions are compulsory. Use first angle projection method unless otherwise stated. Assume suitable dimensions if necessary. Moris CO BL Pt Qt Solve any two: (a) The distance between Party's corner and Egmore is 25 km. On (7) inspection of the road map, its equivalent distance measures & cm anes Sil draw a diagonal scale to read minimum 50m. Show on ita distance of 6350m, (©) raw a rectangular hyperbola when the position of a point P on the (7) | Curve is at a distance of 35 mm and 50 mm from two asymptotes 1 3° 481 Draw a tangent tot at a point 40 mm away from any one asymptote (9) Acicle of 60 mm diameter rolls along a straight line without sipping. (7) Draw the curve traced out by a point P on the circumference, for orcs Bisieal Cohey complete revolution of the circle, Name the curve. Draw a tangent to the curve at a point on it 40 mm from the line. az (@) The projectors of the ends A and B of a line AB are 120mm apart. A (7) is 65 mm. below H.P. and 55 mm, behind V.P., B is 100 mm. above HP. and 20 mm. in front of V.P. Determine the true length , traoes 2 een and inclinations of the line AB. Measure the distance of each trace from XY. « and (©). Athin 30: - 60" set-square has its longest edge inthe'V.P. andiinclined (7) at 30° to the H.P. Its surface makes an angle of 45° with the V.P. Draw Me By ee its projections. OR (©) ~ A cylinder of 60 mm base diameter and 70 mm long axis has a point (14) of its base circle in the V.P. Its axis is inclined at 30° to V.P, and 45° 2 3 248 to the H.P. Draw its projections. 3 (a) Draw the projections of a cone resting on the ground on ils base and (14) show on them, the shortest path by which a point P, starting from a Point on the circumference of the base and moving around the cone 3 9 2st will return to the same point, Base of cone is 60 mm diameter; axis 80 mm long, OR “ (6) A tight regular pentagonal pyramid, 40 mm side of base and 100 mm (14) « 6 mie height of axis, lies on one of its slant faces in H.P. with its axis parallela4 QS (a) (b) {oV.P. An auxiliary plane perpendicular to H.P. and inclined at 30° to V.P. cuts the pyramid and passes through a point 47 mm from the base along the axis. Draw sectional elevation and the true shape of the section. Draw the Front View, Top View and Both Side Views of the object shown in Figure-1 Draw the isometric projection of the block shown in Figure-2 oR Draw the isometric projection of a sphere of diameter 50 mm., when itis placed centrally on the frustum of a square pyramid of sides 50 ‘mm of the top and 70 mm sides of base and height 30 mm, 20 40, (14) 43 284 (14) 4 3 224 43 323February 2022 Examination 1-Yr., B.Tech. ME10149: Engineering Graphics Exam Code: 2126 (Max. Marks 240] PART-B QB. Solve the following 5 questions each carry equal of 8 marks each. ‘S.No Questions Marks {CO | BL| PI Qi | (a) Draw Plan, Elevation and Left hand side view of fig. 1 shown | 8 [cor] tz} 134 herewith [or | (b) Draw isometric projection of @ cylinder of diameter 40 mm and axial | | length of 70 mm tying on the HP, when its axis is parallel to both HP and ve. Q2 (a) n'a map a 36 km distance is shown by a line 45 om long. Calculate the RF and construct a plain scale to read kilometers and hectometers, | for max. 12 km. Show a distance of 8.3 km on it 8 OR | | | (b) Draw an elipse by concentric circle method, take major axis as 100 | | | Tm and minor axis as 70 mm long. i | | 3 | (a) The end A ofa line AB is 15 mm above the HP and 10 mm in front of | \VP. The other end B is 45 mm above the HP and 5 mm in front of VP. The distance between the end projectors is 38 mm. Draw the projection | of the Line AB and find its true length 8 |oos| ts | 112 OR (b) Draw the projection of a pentagonal Prism, base 25 mm side and ‘axis 50 mm long resting on one of its rectangular face on the HP, with the axis inclined at 45° to the V Q4 | (a) A night square pyramid of base side 40 mm and height 120 mm resting on the ground on its base, itis bisected by a horizontal cutting plane, Draw the development of tho lower part ofthis Pyramid 8 |cos|t2| 51.2 OR (0) A right circular cone of base diameter 50 mm and height 80 mm is | bisected by an inctined plane making an angle of 45° to the HP. Draw its | projection, and show sectional top view | i QS | (a) Write AuUloCAD command for drawing the geometric enties: (i Circle, (i) Arc, (ii) Ellipse and (iv) Polylines, OR @ jcos) 4 | 112 (b) For drawing the projection of a square Prism of side 40 mm and height 60 mm resting on its base on the HP. Write various AutoCAD commands for this projection L