Company name: PT.

Saka Parfima
Created by: IdaBagusEgy
Phone: 085829118762
Email: [email protected]
Date: 04/10/2023
Qty. Description
1 CR 5-8 A-A-A-E-HQQE

Note! Product picture may differ from actual product

Product No.: On request

Vertical, multistage centrifugal pump with inlet and outlet ports on same the level (inline). The pump head and base
are in cast iron – all other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe
handling, and easy access and service. Power transmission is via a rigid split coupling.
The pump is fitted with a 3-phase, fan-cooled asynchronous motor.

Further product details

Steel, cast iron and aluminium components have an epoxy-based coating made in a cathodic electro-deposition
(CED) process.
CED is a high-quality dip-painting process where an electrical field around the products ensures deposition of paint
particles as a thin, well-controlled layer on the surface.
An integral part of the process is a pretreatment.
The entire process consists of these elements:
1) Alkaline-based cleaning.
2) Zinc phosphating.
3) Cathodic electro-deposition.
4) Curing to a dry film thickness 18-22 my m.
The colour code for the finished product is NCS 9000/RAL 9005.

Pump
A standard split coupling connects the pump and motor shaft. It is enclosed in the pump head/motor stool by means
of two coupling guards.

The pump head, pump head cover and flange for motor mounting is made in one piece. The pump head has a
combined 1/2" priming plug and vent screw.

The pump is fitted with a balanced O-ring seal unit with a rigid torque-transmission system.
This seal type is assembled in a cartridge unit which makes replacement safe and easy.
Due to the balancing, this seal type is suitable for high-pressure applications.
The cartridge construction also protects the pump shaft from possible wear from a dynamic O-ring between pump
shaft and shaft seal.

Printed from Grundfos Product Centre [2023.14.004] 1/7

 Company name: PT. Saka Parfima
Created by: IdaBagusEgy
Phone: 085829118762
Email: [email protected]
Date: 04/10/2023
Qty. Description
1 Seal faces:
• Rotating seal ring material: silicon carbide (SiC)
• Stationary seat material: silicon carbide (SiC)
This material pairing is used where higher corrosion resistance is required. The high hardness of this material pairing
offers good resistance against abrasive particles.
Secondary seal material: EPDM (ethylene-propylene rubber)
EPDM has excellent resistance to hot water. EPDM is not suitable for mineral oils.

The shaft seal is screwed into the pump head.

The chambers and impellers are made of stainless-steel sheet. The chambers are provided with a PTFE neck ring
offering improved sealing and high efficiency. The impellers have smooth surfaces, and the shape of the blades
ensure a high efficiency.

The base is made of cast iron. The oval flanges are bolted to the base. The outlet side of the base has a combined
drain plug and bypass valve. The pump is secured to the foundation by four bolts through the base plate.

Motor
The motor is a totally enclosed, fan-cooled motor with principal dimensions to IEC and DIN standards. The motor is
flange-mounted with tapped-hole flange (FT).
Motor-mounting designation in accordance with IEC 60034-7: IM B 14 (Code I) / IM 3601 (Code II).
Electrical tolerances comply with IEC 60034.
The motor efficiency is classified as IE3 in accordance with IEC 60034-30-1.
The motor does not incorporate motor protection and must be connected to a motor-protective circuit breaker which
can be manually reset. The motor-protective circuit breaker must be set according to the rated current of the motor
(I1/1).
Technical data

Liquid:
Pumped liquid: Water
Liquid temperature range: -20 .. 120 °C
Selected liquid temperature: 20 °C
Density: 998.2 kg/m³

Technical:
Pump speed on which pump data are based: 2853 rpm
Actual calculated flow: 5.783 m³/h
Resulting head of the pump: 40.12 m
Pump orientation: Vertical
Shaft seal arrangement: Single
Code for shaft seal: HQQE
Approvals: CE,EAC,UKCA,SEPRO
Approvals for drinking water: WRAS,ACS
Curve tolerance: ISO9906:2012 3B

Printed from Grundfos Product Centre [2023.14.004] 2/7

 Company name: PT. Saka Parfima
Created by: IdaBagusEgy
Phone: 085829118762
Email: [email protected]
Date: 04/10/2023
Qty. Description
1 Materials:
Base: Cast iron
EN 1561 EN-GJL-200
ASTM A48-25B
Impeller: Stainless steel
EN 1.4301
AISI 304
Bearing: SIC

Installation:
t max amb: 60 °C
Maximum operating pressure: 16 bar
Max pressure at stated temp: 16 bar / 120 °C
16 bar / -20 °C
Type of connection: Oval / Rp
Size of inlet connection: 1 1/4 inch
Size of outlet connection: 1 1/4 inch
Pressure rating for connection: PN 16
Flange size for motor: FT100

Electrical data:
Motor standard: IEC
Motor type: 80C
IE Efficiency class: IE3
Rated power - P2: 1.1 kW
Power (P2) required by pump: 1.1 kW
Mains frequency: 50 Hz
Rated voltage: 3 x 220-240D/380-415Y V
Rated current: 4.35/2.50 A
Starting current: 450-500 %
Cos phi - power factor: 0.83-0.76
Rated speed: 2840-2870 rpm
IE efficiency: IE3 82,7%
Motor efficiency at full load: 82.7 %
Motor efficiency at 3/4 load: 84.6 %
Motor efficiency at 1/2 load: 85.4 %
Number of poles: 2
Enclosure class (IEC 34-5): 55 Dust/Jetting
Insulation class (IEC 85): F
Motor No: 85U05105

Controls:
Frequency converter: NONE

Others:
Terminal box position: 6 o´clock
Minimum efficiency index, MEI ≥: 0.57
Net weight: 26.3 kg
Gross weight: 29.1 kg
Shipping volume: 0.074 m³
Danish VVS No.: 385902008
Swedish RSK No.: 5824851
Finnish LVI No.: 4925508
Norwegian NRF no.: 9040282

Printed from Grundfos Product Centre [2023.14.004] 3/7

 Company name: PT. Saka Parfima
Created by: IdaBagusEgy
Phone: 085829118762
Email: [email protected]
Date: 04/10/2023

On request CR 5-8 A-A-A-E-HQQE 50 Hz

H CR 5-8, 3*400 V, 50Hz eta
[m] [%]

60

55

50 100

45 90

40 80

35 70

30 60

25 50

20 40

15 30

10 20

5 10

0 0
0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 Q [m³/h]
Q = 5.783 m³/h H = 40.12 m
n = 2873 rpm Pumped liquid = Water
Liquid temperature during operation = 20 °C Density = 998.2 kg/m³
Eta pump = 64 % Eta pump+motor = 53.8 %
P NPSH
[W] [m]

1400 7
P1
1200 6

1000 P2 5

800 4

600 3

400 2

200 1

0 0
P1 = 1172 W
P2 = 985.5 W
NPSH = 1.92 m

Printed from Grundfos Product Centre [2023.14.004] 4/7

 Company name: PT. Saka Parfima
Created by: IdaBagusEgy
Phone: 085829118762
Email: [email protected]
Date: 04/10/2023
H CR 5-8, 3*400 V, 50Hz eta
Description Value [m] [%]
General information: 60
Product name: CR 5-8 A-A-A-E-HQQE
55
Product No: On request
50 100
EAN number: On request
45 90
Technical:
40 80
Pump speed on which pump data are 2853 rpm
based: 35 70

Actual calculated flow: 5.783 m³/h 30 60

Resulting head of the pump: 40.12 m 25 50

Maximum head: 56.5 m 20 40
Stages: 8 15 30
Impellers: 8 10 20
Number of reduced-diameter impellers: 0 5 10
Low NPSH: N 0 0
Pump orientation: Vertical 0 1 2 3 4 5 6 7 Q [m³/h]

Shaft seal arrangement: Single Q = 5.783 m³/h H = 40.12 m

n = 2873 rpm Pumped liquid = Water
Code for shaft seal: HQQE Density = 998.2 kg/m³ Eta pump = 64 %
CE,EAC,UKCA,SEPRO Eta pump+motor = 53.8 %
Approvals: Liquid temperature during operation = 20 °C
P NPSH
Approvals for drinking water: WRAS,ACS [W] [m]
P1
Curve tolerance: ISO9906:2012 3B 1200 6
Pump version: A 1000 P2 5
Model: A 800 4
Materials: 600 3

Base: Cast iron 400 2

Base: EN 1561 EN-GJL-200 200 1

0 0
Base: ASTM A48-25B
P1 = 1172 W
Impeller: Stainless steel P2 = 985.5 W
Impeller: EN 1.4301 NPSH = 1.92 m
20

50

145 180
220
160

75
100
422

M10 X4
140
x
2 3.5
2

Impeller: AISI 304

Rp1/2
G 1 1/4

G 1/2 120
251

109
141

Material code: A 109

141
Code for rubber: E
Bearing: SIC
Installation:
251

t max amb: 60 °C
Maximum operating pressure: 16 bar 120
G 1/2 G 1/2
Max pressure at stated temp: 16 bar / 120 °C
Max pressure at stated temp: 16 bar / -20 °C
422

Type of connection: Oval / Rp G 1/2

Rp 1 1/4
22 M10 X 40
Size of inlet connection: 1 1/4 inch
4 x 13.5
Size of outlet connection: 1 1/4 inch
20
50

Pressure rating for connection: PN 16 100

145
75
180

Flange size for motor: FT100 160 220

Connect code: A
Liquid:
Pumped liquid: Water HIGH VOLTAGE
DIRECTION OF ROTATION

Liquid temperature range: -20 .. 120 °C

Selected liquid temperature: 20 °C
Density: 998.2 kg/m³
L3

Electrical data:
L1 L2

Motor standard: IEC

Motor type: 80C
IE Efficiency class: IE3 LOW VOLTAGE
DIRECTION OF ROTATION

Rated power - P2: 1.1 kW

Power (P2) required by pump: 1.1 kW
Mains frequency: 50 Hz
L3

Rated voltage: 3 x 220-240D/380-415Y

L1 L2

V
98.3169

Rated current: 4.35/2.50 A

Printed from Grundfos Product Centre [2023.14.004] 5/7

 Company name: PT. Saka Parfima
Created by: IdaBagusEgy
Phone: 085829118762
Email: [email protected]
Date: 04/10/2023

Description Value
Starting current: 450-500 %
Cos phi - power factor: 0.83-0.76
Rated speed: 2840-2870 rpm
IE efficiency: IE3 82,7%
Motor efficiency at full load: 82.7 %
Motor efficiency at 3/4 load: 84.6 %
Motor efficiency at 1/2 load: 85.4 %
Number of poles: 2
Enclosure class (IEC 34-5): 55 Dust/Jetting
Insulation class (IEC 85): F
Built-in motor protection: NONE
Motor No: 85U05105
Controls:
Frequency converter: NONE
Others:
Terminal box position: 6 o´clock
Minimum efficiency index, MEI ≥: 0.57
Net weight: 26.3 kg
Gross weight: 29.1 kg
Shipping volume: 0.074 m³
Danish VVS No.: 385902008
Swedish RSK No.: 5824851
Finnish LVI No.: 4925508
Norwegian NRF no.: 9040282

Printed from Grundfos Product Centre [2023.14.004] 6/7

 Company name: PT. Saka Parfima
Created by: IdaBagusEgy
Phone: 085829118762
Email: [email protected]
Date: 04/10/2023

On request CR 5-8 A-A-A-E-HQQE 50 Hz

M10 X 40

13.5
Rp 1 1/4

x
4

75

180
220
20
G 1/2

22

100
145
141

160
109

G 1/2

G 1/2
120

50

251 422

Note! All units are in [mm] unless others are stated.

Disclaimer: This simplified dimensional drawing does not show all details.

Printed from Grundfos Product Centre [2023.14.004] 7/7