Scribd
Upload
65 views2 pages

Acer MV 10 MSDS

The AGIP BLASIA series of oils are extreme pressure lubricants formulated from paraffinic base stocks and additives to meet a wide range of requirements. They are suitable for gears operating under severe duty conditions and satisfy operational requirements. AGIP BLASIA oils demonstrate good anti-wear and EP properties, thermal and oxidation stability, and protect parts from corrosion and rust. They meet various industry specifications and are recommended for lubricating enclosed gears and other heavily loaded components.

Uploaded by

Wahyu Bt
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
65 views2 pages

Acer MV 10 MSDS

The AGIP BLASIA series of oils are extreme pressure lubricants formulated from paraffinic base stocks and additives to meet a wide range of requirements. They are suitable for gears operating under severe duty conditions and satisfy operational requirements. AGIP BLASIA oils demonstrate good anti-wear and EP properties, thermal and oxidation stability, and protect parts from corrosion and rust. They meet various industry specifications and are recommended for lubricating enclosed gears and other heavily loaded components.

Uploaded by

Wahyu Bt
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

AGIP BLASIA

The AGIP BLASIA series has been developed to meet the widest range of requirements of
EP (Extreme Pressure) lubrication such as, for instance gears, operating under severe duty
(ISO-L-CKD classification).
The oils are formulated from paraffinic base stocks and additives such as sulphur
compounds (which ensure good high-speed and shock-load performance) and phosphorus
compounds (for low-speed and high-load performance). They thus satisfy the widest range
of operational requirements.

CHARACTERISTICS (TYPICAL FIGURES)


AGIP BLASIA

ISO VG GRADE
Characteristics ASTM Unit
68 100 150 220 320 460 680

Density at 15°C D 4052 kg/l 0.882 0.885 0.892 0.898 0.900 0.904 0.907
2
Viscosity at 100°C D 445 mm /s 8.65 11.25 14.7 19.2 23.8 30.5 39.2
2
Viscosity at 40°C D 445 mm /s 66 100 148 220 310 455 670
Viscosity Index D 2270 102 98 98 98 97 96 96
Flash Point, COC D 92 °C 226 246 256 260 262 270 240
Pour Point D 97 °C -15 -15 -15 -12 -12 -9 -6

PROPERTIES AND PERFORMANCES


ƒ AGIP BLASIA oils have very good anti-wear and EP properties as demonstrated by the
following tests :
o FZG : pass the 12th stage level
o TIMKEN : OK LOAD 60 lbs
o 4 BALL EP :
110 kg last non-seizure load
280 kg weld load
o Foaming Tendency/Stability:
Seq 1 : 0/0
Seq 2 : 0/0
Seq 3 : 0/0
ƒ Thermal and oxidation stability, permitting continuous use at operating temperature as
high as 100 °C.
ƒ Non-corrosiveness towards materials employed for the construction of machinery and
especially those used for gaskets and seals, as well as metals such as steel, cast iron,
copper, and bronze.
ƒ Demulsibility: AGIP BLASIA oils separate rapidly from water and thus ensure perfect
lubrication even in applications where water contamination is possible, as in steel-making
plants for instance.
ƒ Rust protection properties: These oils effectively help protect and conserve lubricated
parts even in damp conditions.
ƒ Toxicity: the product is non-toxic since they contain no lead compounds.

Approved by ENI S.p.A Marketing Office 68 [IN 620.05.05]


100 [IN 621.05.05]
Divisione Refining & Marketing PT. BAHANA NUSA LUBRINDO 150 [IN 622.05.05]
Menara Ravindo 15th Floor, 220 [IN 623.05.05]
Jl. Kebon Sirih kav. 75, Jakarta 10340 320 [IN 624.05.05]
Tel. 021 3903390 460 [IN 625.09.00]
680 [IN 627.02.03]
www.agipoil.co.id
SPECIFICATIONS

AGIP BLASIA oils meet the requirements of the following specifications :


ƒ ISO-L-CKD
ƒ ISO 12925
ƒ US STEEL 224
ƒ ANSI/AGMA 9005-D94 (AGMA 2EP, 3EP, 4EP, 5EP, 6EP, 7EP, 8EP)
ƒ DIN 51517 TEIL 3 CLP
ƒ CINCINNATI MILACRON
ƒ DAVID BROWN S1.53.101 (5E)

APPLICATION

AGIP BLASIA oils are recommended for splash or circulation lubrication of all types of
enclosed gears, especially where operating conditions involve heavy loads, high speeds and
high relative sliding velocities, at elevated ambient and operating temperatures. The oils
can also be used to lubricate other heavily-load parts and components such as couplings,
transmission screws and low speed plain bearings.

APPROVAL
AGIP BLASIA products have been approved by the CINCINNATI MILACRON (P-63 ISO 68, P-
77 ISO 150, P-74 ISO 220, P-35 ISO 460)

Approved by ENI S.p.A Marketing Office 68 [IN 620.05.05]


100 [IN 621.05.05]
Divisione Refining & Marketing PT. BAHANA NUSA LUBRINDO 150 [IN 622.05.05]
Menara Ravindo 15th Floor, 220 [IN 623.05.05]
Jl. Kebon Sirih kav. 75, Jakarta 10340 320 [IN 624.05.05]
Tel. 021 3903390 460 [IN 625.09.00]
680 [IN 627.02.03]
www.agipoil.co.id

You might also like